Just did this, took me two hours. Very good video. Everything works as it should. Saved me $500 from a local fix it store.

@kyrenmitchell2614

Ай бұрын

what did you use mines is broken

yes i do the same thing as you but i take my time and whole job takes 2 hours ....what you see on youtube is cut down for 22 mins , because it was 2 hrs nobody will watching it lol

Amazing work, thank you sir

Nice work mate

It's not a hammer you need, it's a mallot! (And that's how it's spelt too! 😂)

@GetRefurbed

11 ай бұрын

That comment was made just for you and Leigh, straight up. That's a promise.

@tabathaubermicro9601

11 ай бұрын

🔨🔨🔨@@GetRefurbed

great thanks for your easy explanation

@GetRefurbed

6 ай бұрын

Glad it was helpful!

Great video. Will see if it works on fixing my brothers system

Good video mate :)

Great job 👍

Ive been watching you add solder to the caps, are you just swiping across the caps or are you lifting the iron across to each cap?

Excellent vid

Thanks!

Can you help me out, I am going to attempt to repair my hmdi on my PS5 without any soldering experience and i wanted to ask you if you could explain to me in detail how you clean during the video?

why does the HDMI port pins look different? the original one had pins that came out farther. does that matter at all?

My PS5 is sparkling ✨ and taking me back to Home Screen while playing. Can it be fix?

Excellent video. I'm getting a lot of requests for these port repairs at this point. My one question is, what is your low melt point solder, and does it have any concentration of lead? I've been searching for a good low melting point solder to loosen these joints, but I've just not had a ton of luck. Also what do you use for a microscope?

@GetRefurbed

4 ай бұрын

Hey buddy. Thanks for watching. No low melt here. Just plain old 63/37 leaded Kester. The board take a ton of heat, not so bad once they're heat soaked which is why I tend to use the hot drop method. Less stress on the board.

Question my ps5 got knocked off the table and fell on the HDMI cable area bending the plug on the HDMI cable itself..i got a new cable but nothing and them had a friend who is pretty good replace the HDMI port but still not working any tips or causes?

i was pulling off the white and black cables and the copper head came off can i just simply reattach it ? or is ruined ?

Mine still works, it’s just loose. I have to turn the actual cord and play or jiggle it to get it to turn on…can it be tightened or should I just replace the HDMI port?

At last ,someone who doesn't over solder the HDMI port.

@GetRefurbed

11 ай бұрын

That's a bit of a bone of contention. There's nothing wrong with it, I just tend to find I don't have a need unless I've missed a pin, in that case I'll always go over them all with the iron.

@gibbo9089

11 ай бұрын

@@GetRefurbed some KZreadrs must have shares in the solder & flux companies when you see how much they use. Not mentioning any names. 😉

@K-eazy77

10 ай бұрын

Been trying to fix mine any plug around Pretoria where to go

@MarkSmith-er7fe

9 ай бұрын

@@GetRefurbed someone said it takes all day to replace the hdmi port---surely it shouldnt take all day? hes lying

@brandonkick

7 ай бұрын

@@MarkSmith-er7fe if your skilled enough at microsoldering, it's an hour long job taking you very sweet time and doing some cleaning as you go. The hardest part is there are 100000000000 screws of different sizes.

How much do you charge to perform that repair

@GetRefurbed

6 ай бұрын

On the PS5. £70.

@Skill.8910

26 күн бұрын

@@GetRefurbed where are you base?

Hi great video

@GetRefurbed

11 ай бұрын

Thank you!!

what all do i need for this list the tools and glue so i can order it

So is their anything that can be done to stop the hdmi port from failing because mines failed and no one ever touches the ps5 and it didn’t even look damaged

Xcellent Vid! 👍🏻just about to do my first PS5 HDMI repair. Ordered some No Clean Flux Paste in syringe dispenser, have variable hot air gun and following your guide. 09:55 "come in with the hot air clean up where we've been, some 99% IPA". Are you using a stiff brush, hot air (from above?) and just IPA or is that flux? 🤔 Keep on Keeping On 👏🏻

@youngwolf421

8 ай бұрын

Did you successfully repair it. I have another even touched solder before and soon going to attempt this and was wondering what tools you used or that I should use. I know i need a good flux, solder, hot air, soldering gun.

@heath2byte

7 ай бұрын

​ @youngwolf421 I did thanx 👍🏻Not to put you off, but I wouldn't advise this as your first step into soldering. Take it to someone with experience in fixing HDMI on PS5. There is alot at stake when pointing that much heat at sensitive electronics (particular the tiny caps @ 09:39 and 11:11 ). Purchased No Clean Flux Paste in a Pneumatic Dispenser from Amazon. Already had a Wagner Furno 500 Heat Gun and 25W Soldering Iron. Never tackled anything as complex and even with years of experience with micro electronics it was daunting. This video was great for all the info I needed to do the job successfully. Working PS5 at the end of it! GL 🤞🏻

Hey everyone, just a quick question to see if anyone could answer! What did he use in the video to get the Liquid Metal back into the center? I couldn’t really understand it.

@GetRefurbed

5 ай бұрын

I used the needle on the syr8nge from a tube of liquid metal bud

Do you have a part number for the HDMI connector?

I don't like the liquid metal because i have my ps5 standing up and I'm always worried that it'll break (I can't put it down because there is no space)

What if the light doesn’t show white and keeps flashing blue???

Great fix. Want more retro lol

@GetRefurbed

11 ай бұрын

It's coming my man! Promise! There's a nice reshell coming up ;)

The die has a void in the liquid metal because when people stand their PS5 upright gravity causes the liquid metal to pool to one side of the die.

I stepped on the comtroller cable and the ps5 was falling down lucky tge hdmi cable held it but its bend now usually its no problem its still working but i feel like my game is delayed is it delayed or because the port is still working but its wiggle ing

What kind of screwdriver are you using?

Can get your affirmation please

So question? Is it possible for the hdmi port to be messed up even if it doesn’t show physical signs of being damaged? My ps5 has been sitting in the same spot for the past 6 months and the last time I played it I didn’t have any issues. But this past weekend I was gonna finally do my software update because right when I stopped playing it months ago it was due for an update, just never got around to doing it. Could the need for an update cause this issue? Fully disassembled the console with the plan of switching the hdmi ports but like I said it looks like it’s in perfect condition. What should I do? I’m still able to play my VR games but can’t see any display on the tv. I’ve tried different cords and different TVs and my Xbox isn’t having this problem, only the PlayStation

My PS5 that same repair how much does it cost

Is it necessary to add solder to the pad connectors?

@isaacadamson7072

Ай бұрын

Guess we will never know. He just liked the comment and didn’t answer😂

I habe the same issue lights up till white light...and hdmi port seems good...I wonder if its the encoder?do you know how to test it please

@GetRefurbed

6 ай бұрын

The encoder rarely goes wrong. Always change port first before anything else. Even if it looks good.

I really need someone to do this for my PlayStation 5 and a Xbox series x how much does it generally cost?

@GetRefurbed

6 ай бұрын

PS5 is £70. Series X £65. Welcome to send them in but return postage would need to be covered by you buddy. Current turnaround is 3 - 4 working days returned to you.

I’m replacing mine and my hot air station doesn’t make the port come off! Any advice on distance, temp, and duration?

@GetRefurbed

4 ай бұрын

Every hot air station is different bud full heat and airflow from the top will eventually get it. Lots of flux. Try putting some solder over all of the pins and ground legs if it doesn't budge

How much does it costs

Would you be able to fix my ps5 hdmi port as I sent it to Sony over Christmas time got it back today and got told they couldn’t fix it as warrenty has been voided even tho I’ve never touched my ps5

@GetRefurbed

6 ай бұрын

Absolutely. Drop us an email on info@getrefurbed.com

@getrefured what’s that gel called why do they use it and can u use a heat gun that removes paint or that doesn’t work

@GetRefurbed

6 ай бұрын

That Kingbo Flux RMA-218. I would absolutely not recommend using a heat gun designed for that purpose. You need a hot air station capable of putting enough heat through the board without destroying it.

@jameselloko6365

6 ай бұрын

@@GetRefurbed what’s that gel for

I can't find my problem specifically anywhere. When I google hdmi port is loose everyone talks about it being broken and no image. I HAVE an image the port is just really really loose out of nowhere and it's hard to put the hdmi wire in. It got hard to fit in out of nowhere. I don't kno what happened. But once I can get one in I can still see the display

nice

i need help, can anyone give me link for case screw placement for 1200, everytime I disassemble the ps5 I come away with more screws, although its working great.

How necessary is the flux

My HDMI port is broken like the port has a crack and it won't connect with the tv what could I do

hello how much you charge for same thing replacing HDMI port please and thank you

@GetRefurbed

2 ай бұрын

Cost is £70 plus any return postage you require. Drop us an email at info@getrefurbed.com

What state are you in? My brothers PS five is like that. pls tell me

@GetRefurbed

6 ай бұрын

UK based i'm afraid.

What does this roughly cost?

@4sam2wise18

6 ай бұрын

$200

Not in usa?

Where are you based mate I’ll come to your shop??

@GetRefurbed

6 ай бұрын

Cambridge buddy

How much would it cost to fix it?

@GetRefurbed

5 ай бұрын

We're running an offer at the moment, £40 plus postage.

Mate When I do Hdmi I alway loss back side two componant

@GetRefurbed

6 ай бұрын

Too much air flow on the heat my man!

Quick q for you from an american, I'm doing this now. That's 430°C correct?

@GetRefurbed

11 ай бұрын

Always C when we're in the UK buddy!

@fist-full-o-game

11 ай бұрын

@@GetRefurbed absolutely wonderful video, sir. Never soldered a day in my life but nailed it first try. Greatly appreciate this!!!

Brother! My ps5 hdmi port is not working. And I need to changed it. I have ordered a hdmi port for the pa5, but what tools do I need for the repair? Can please anyone make a list for me? I wanna do it by myself.

@GetRefurbed

5 ай бұрын

I'll be straight with you buddy, this isn't a repair you want to take on yourself unless you are well versed in how to work around small components. For some perspective, you'll be spending hundreds on tools as opposed to sending it in for repair. At the moment we have an offer running for £40 per port.

@kaw546

5 ай бұрын

@@GetRefurbed i live norway. Can u fix it ?

@GetRefurbed

5 ай бұрын

@kaw546 absolutely. You'd just need to cover the postage both ways. It might be cheaper to look for a local repair shop?

@kaw546

5 ай бұрын

@@GetRefurbed local repair shops price to fix it, is 140$.. which is reallly stupid. and thats why i wanna fix my self. but thanks anyway

Could u fix my ps5?

No matter what i try, i cant get the hdmi off. Nothing i do melts the joints. I feel like i have tried everything! Heat gun, rosin paste flux (not sure if im using the right one), adding more soldering... nothing works for me

@umranafzal2969

10 ай бұрын

Hi, I finally did it. Took me 2 days to do it. Main thing is you need patience as it took me about 5 mins to finally melt the solder on the hdmi. First tilt the board so the hdmi is facing down towards the floor. Heat it from other side. Eventually it will fall off due to gravity. Second heat the solder and use a solder sucker after about 5 mins to suck the solder off. Do all 4 and you’ll be left with 4 big holes. L the board cool down and then put the hdmi in and solder the joint. The solders that Sony have put on have a high melting point so you just got to be patience. Don’t start and stop after a minute or so. Be patience and have that gun pointed at it for about 5 mins, no kidding.

@anett076

10 ай бұрын

Awsome...because I had the same problem

@youngwolf421

8 ай бұрын

@@umranafzal2969 what were the tools that you used? This will be my first time too. ]

@youngwolf421

8 ай бұрын

@@umranafzal2969 Also what hot air gun did you use, there a bit expensive.

@umranafzal2969

8 ай бұрын

@@youngwolf421 SEEKONE 2000W Professional Hot Air Gun. I already had the soldering iron and solder sucker. Last 2 you may not need if you can put the new HDMI in place whilst the solder is still hot and wet like in this video. If you can’t then you may need someone else to hold the hdmi in place very firmly whilst you solder. The pins on the jdmi need to be in contact with the pins on the board otherwise it won’t work. Just be careful that you only apply concentrated heat to the hdmi only as you could damage your ps5. Do it at your own risk.

Can I send you mines to fix ???

@GetRefurbed

6 ай бұрын

Welcome to. Email address is in the description. Happy to help

this looks very simple put don't got the tools );

@GetRefurbed

6 ай бұрын

Same as everything else, do it often enough it becomes second nature, definitely not simple though.

Came here thinkin I could do it own my own but I’ll jus pay the 200 cuz this is over whelming

Do i need a heat gun

@GetRefurbed

4 ай бұрын

100 percent you do buddy!

If I sent my PlayStation 5 to you could you fix it ofc I’ll pay

@GetRefurbed

6 ай бұрын

Of course. Drop us an email buddy. Info@getrefurbed.com

@Klin2x

6 ай бұрын

@@GetRefurbed I need you to fix my hdmi bc I broke it and ik for a fact that’s what it is bc I see it in the back it’s chipped

Why’d u apply so much flux

@drecdabeast

8 ай бұрын

Increase heat transfer

Can you fix my ps5

Whats this liquid is called??

@GetRefurbed

11 ай бұрын

Liquid Metal

So with the liquid inside ? Ill have to place it horizontally?? Cuz I like the standing version I don’t want mine facing the floor with his face 😅 But shall I do it or no ????

@drecdabeast

8 ай бұрын

I would lay if flat if overheating were to happen soldering drip on mother board ect could cause avoidable issues

The small black one i lose it 🥲 where can i find one ?

I had one that someone stole from me in a while back and we just got it back not too long ago. Just wanted to know if there anyway we can get it fixed it’s the HDMI was ripped out

@youngmelo3717

3 ай бұрын

How does someone steal a whole PS5 lol

@deathreconing2211

3 ай бұрын

@@youngmelo3717 well, considering I live in an RV and during the time when the person was able to break into my RV is because they got in through where my air conditioner was at they pushed it through the window and that’s how they did it with a ladder but thanks for asking in such a nasty wayand laughing about it