Looks great. I am in the process of upgrading my kossel to something similar to your Phoenix
@kristinapschell Жыл бұрын
Amazing work!
@mitsubishimakes Жыл бұрын
Love the build! Great to see more Phoenix Deltas in the wild!
@lovesdonutz Жыл бұрын
finally another one! i love these. nice work
@stefanguiton Жыл бұрын
Cool stuff!
@velvia7880 Жыл бұрын
It's a cool project. Would love to see it evolve and catch on like Voron etc. An enclosed version would be awesome.
@GearheadCreations
Жыл бұрын
Absolutely! There are rumors that Rolohaun is working on a second design, so I guess we’ll see what happens.
@corlissmedia2.0Ай бұрын
The klipper screen setup is really wonderful. I'm building a Delta right now. I have a Klipper screen / 7" monitor I used on my BIQU Hurakan. Is the offer of help still available?
@honeyy79 Жыл бұрын
I have 2 Anycubic Predator and deltas are definatley my favorite. But i have some concerns in regards to keeping the electronics under the heatbed. I'd love mods so they could be on the top of the machine. would be so much better. But it would work with no heatbed it seems :D
@velvia7880
Жыл бұрын
I have my electronics under the bed, but it's separated by a 3mm thich dibond plate (aluminium plastic sandwich). Helps keep a slightly lower point of gravity for the printer, and it can be enclosed.
@caspianmakers58825 ай бұрын
Nice work, looks like a great printer. Are you using the BTT octopus controller?
@GearheadCreations
5 ай бұрын
Thanks! I’m using a BTT Pico
@ArasBalaliMoghaddam-bt9ni
5 ай бұрын
Have you by any chance done a video on configuring klipper for Delta? Was that process relatively straightforward?
@GearheadCreations
5 ай бұрын
Unfortunately I have not done that yet. Good idea though. It was pretty straightforward
@Threeaxis3DP Жыл бұрын
AMAZING!, what length of your rod?
@GearheadCreations
Жыл бұрын
Thanks! 400mm arms
@Threeaxis3DP
Жыл бұрын
@@GearheadCreations Thank you!!
@honeyy79 Жыл бұрын
Could you make a BOM file for this setup? :)
@GearheadCreations
Жыл бұрын
Here you are: drive.google.com/drive/folders/1-61bsdAH8g_Bz6MeuX-K4DfnGdR-y1v5
@RENSOPINARGOTE-cs5tk3 ай бұрын
Imput shaping ?
@GearheadCreations
3 ай бұрын
Never tried it on this machine since I only used an Orange Pi which doesn’t have the correct output
@kirraa2003 Жыл бұрын
Can you send link for parts please. I need this project
@GearheadCreations
Жыл бұрын
Yeah, I mainly followed the parts list from Rolohaun’s GitHub: github.com/rolohaun/PhoenixDelta
@alexeygurzhiy Жыл бұрын
What is the print size you are having? also could you please share a link to your rods? and to make a review of your smart effector and how to fit everything there?
@GearheadCreations
Жыл бұрын
The glass build plate I’m using has a diameter of 310mm. You can purchase the arms here: www.magballarms.com/ or through Filastruder, although it looks like they’re out of 400mm length at the moment. And yes, a review on the smart effector might be on its way ;)
@alexeygurzhiy
Жыл бұрын
@@GearheadCreations thank you! isn't it too long for 310? as far as I see - it is for 340
@GearheadCreations
Жыл бұрын
Absolutely! Yes, 340mm arms would probably work just fine, however I prefer to use longer arms as they allow for a bit faster movements
Пікірлер: 28
Looks great. I am in the process of upgrading my kossel to something similar to your Phoenix
Amazing work!
Love the build! Great to see more Phoenix Deltas in the wild!
finally another one! i love these. nice work
Cool stuff!
It's a cool project. Would love to see it evolve and catch on like Voron etc. An enclosed version would be awesome.
@GearheadCreations
Жыл бұрын
Absolutely! There are rumors that Rolohaun is working on a second design, so I guess we’ll see what happens.
The klipper screen setup is really wonderful. I'm building a Delta right now. I have a Klipper screen / 7" monitor I used on my BIQU Hurakan. Is the offer of help still available?
I have 2 Anycubic Predator and deltas are definatley my favorite. But i have some concerns in regards to keeping the electronics under the heatbed. I'd love mods so they could be on the top of the machine. would be so much better. But it would work with no heatbed it seems :D
@velvia7880
Жыл бұрын
I have my electronics under the bed, but it's separated by a 3mm thich dibond plate (aluminium plastic sandwich). Helps keep a slightly lower point of gravity for the printer, and it can be enclosed.
Nice work, looks like a great printer. Are you using the BTT octopus controller?
@GearheadCreations
5 ай бұрын
Thanks! I’m using a BTT Pico
@ArasBalaliMoghaddam-bt9ni
5 ай бұрын
Have you by any chance done a video on configuring klipper for Delta? Was that process relatively straightforward?
@GearheadCreations
5 ай бұрын
Unfortunately I have not done that yet. Good idea though. It was pretty straightforward
AMAZING!, what length of your rod?
@GearheadCreations
Жыл бұрын
Thanks! 400mm arms
@Threeaxis3DP
Жыл бұрын
@@GearheadCreations Thank you!!
Could you make a BOM file for this setup? :)
@GearheadCreations
Жыл бұрын
Here you are: drive.google.com/drive/folders/1-61bsdAH8g_Bz6MeuX-K4DfnGdR-y1v5
Imput shaping ?
@GearheadCreations
3 ай бұрын
Never tried it on this machine since I only used an Orange Pi which doesn’t have the correct output
Can you send link for parts please. I need this project
@GearheadCreations
Жыл бұрын
Yeah, I mainly followed the parts list from Rolohaun’s GitHub: github.com/rolohaun/PhoenixDelta
What is the print size you are having? also could you please share a link to your rods? and to make a review of your smart effector and how to fit everything there?
@GearheadCreations
Жыл бұрын
The glass build plate I’m using has a diameter of 310mm. You can purchase the arms here: www.magballarms.com/ or through Filastruder, although it looks like they’re out of 400mm length at the moment. And yes, a review on the smart effector might be on its way ;)
@alexeygurzhiy
Жыл бұрын
@@GearheadCreations thank you! isn't it too long for 310? as far as I see - it is for 340
@GearheadCreations
Жыл бұрын
Absolutely! Yes, 340mm arms would probably work just fine, however I prefer to use longer arms as they allow for a bit faster movements
@alexeygurzhiy
Жыл бұрын
@@GearheadCreations thank you