Craziest project I've ever worked on... More details over at symphonyears.com!
Жүктеу.....
Пікірлер: 33
@OversteerEngineer21 күн бұрын
Quality content, keep making videos!
@GearheadCreations
21 күн бұрын
Thank you!
@jasontan7523Ай бұрын
Just subscribed to your channel! Super interesting video and I thoroughly enjoyed it :) looking forward to more stuff from you
@Dantheman3366Ай бұрын
these are sick. cool video man, kinda makes me want to get a 3D printer to see what kinda things i could build.
@GearheadCreations
Ай бұрын
Thanks man! Yes, you should absolutely get into 3D printing; it’s incredibly rewarding once you get the hang of it
@waspfpv9074Ай бұрын
Soo much work !😲 As an IT/Elec student this is even more interesting to watch !😃 +1 sub thank you for this vidéo 🙌
@GearheadCreations
Ай бұрын
Thank you! It really has been quite the project haha. Really glad to hear that you enjoyed it though.
@trailfuchs9 күн бұрын
you've made me very curios about your IEMs. so sad that i live in germany
@GearheadCreations
9 күн бұрын
Hey man, if you’d like a set I’m sure we could work something out for you
@trailfuchs
9 күн бұрын
@@GearheadCreations thanks alot, IEMs is a tough topic. ive testet 6 pairs of IEMs last time ive ordered new ones. hard to test them before deciding to buy
@draglordeАй бұрын
This is great work! How did you achieve that surface finish? a lot of manual sanding + polishing?
@GearheadCreations
Ай бұрын
Thanks! I first sand down the resin shells, then apply a special lacquer which is pretty much magic haha
@draglorde
Ай бұрын
@@GearheadCreations I would love to hear more about this lacquer. I tried a few but had bad results. would you happen to have the name of that lacquer? (not asking for it, but I would watch a video on that whole process ;) )
@GearheadCreations
Ай бұрын
Absolutely! I might dedicate an entire video showing the build process in the future. I use a lacquer called Fotoplast Lack 3, which can be found on Aliexpress from the Soundlink store. Since this stuff isn’t cheap, I’d also recommend trying a nail lacquer by Mia Secret on Amazon if you just wanna get started.
@draglorde
Ай бұрын
@@GearheadCreations thank you!
@hed42027 күн бұрын
Great job! Is this open source? I want to make them.
@GearheadCreations
27 күн бұрын
Thank you! No, unfortunately this is not open source. I am selling it as a complete product on my website with a cable, case, and tips on symphonyears.com though!
@jamesmelemede561018 күн бұрын
whats the input? cable?
@GearheadCreations
18 күн бұрын
It uses a standard 0.78 2-pin wired connection, but can be made wireless with an adapter
@jamesmelemede5610
18 күн бұрын
@@GearheadCreations cheers
@bkrc1237 күн бұрын
FR for hexad?
@GearheadCreations
7 күн бұрын
Haha that’s great that you ask! I currently don’t have any public FR graph for Hexad, as I’m still working on its tune. That set should be ready around mid-summer
@joetkeshubАй бұрын
interesting but so déjà-vu...
@GearheadCreations
Ай бұрын
Oh?
@KaliKavala5 күн бұрын
First time here. Nice vid, nice idea but..... First 5 minutes are really waste of time and useless (except for sponsors or such?) Plus no result is shared (as audio) which on it's own is useless but if u do a comparison (before/after, DIY vs bought, etc) would be interesting to see. Sharing screenshot of charts is not really interesting
@GearheadCreations
5 күн бұрын
Thanks for watching! I’ll keep those things in mind for next video
@KaliKavala
5 күн бұрын
@@GearheadCreations thank you for taking your time and reading my BS :)
@GearheadCreations
5 күн бұрын
Hey, criticism is vital to improving future videos, so thanks for the input
@asddsa-dy4neАй бұрын
Pretty cool stuff but for the love of god stop using audiophile words. You sound like a sommelier that only ever tasted the button shelf stuff.
@fallingwater
Ай бұрын
You, on the other hand, sound exactly as pretentious as every other so-called audiophile I've ever seen.
@asddsa-dy4ne
Ай бұрын
@@fallingwater I'm terribly sorry my good Sir that my reply didn't elevate to your exquisite exelence. If I am allowed, I shall offer a crisp withy reply or would a smooth apology satisfy thy tastes more.
@castffx1728
Ай бұрын
@@asddsa-dy4ne agree with fallingwater, you're the reason audiophile community gets hate. do better.
@asddsa-dy4ne
Ай бұрын
@@castffx1728 I'm not part of the audiophile community. I just don't like the word diarrhea they spew out. did you even read the original comment?
Пікірлер: 33
Quality content, keep making videos!
@GearheadCreations
21 күн бұрын
Thank you!
Just subscribed to your channel! Super interesting video and I thoroughly enjoyed it :) looking forward to more stuff from you
these are sick. cool video man, kinda makes me want to get a 3D printer to see what kinda things i could build.
@GearheadCreations
Ай бұрын
Thanks man! Yes, you should absolutely get into 3D printing; it’s incredibly rewarding once you get the hang of it
Soo much work !😲 As an IT/Elec student this is even more interesting to watch !😃 +1 sub thank you for this vidéo 🙌
@GearheadCreations
Ай бұрын
Thank you! It really has been quite the project haha. Really glad to hear that you enjoyed it though.
you've made me very curios about your IEMs. so sad that i live in germany
@GearheadCreations
9 күн бұрын
Hey man, if you’d like a set I’m sure we could work something out for you
@trailfuchs
9 күн бұрын
@@GearheadCreations thanks alot, IEMs is a tough topic. ive testet 6 pairs of IEMs last time ive ordered new ones. hard to test them before deciding to buy
This is great work! How did you achieve that surface finish? a lot of manual sanding + polishing?
@GearheadCreations
Ай бұрын
Thanks! I first sand down the resin shells, then apply a special lacquer which is pretty much magic haha
@draglorde
Ай бұрын
@@GearheadCreations I would love to hear more about this lacquer. I tried a few but had bad results. would you happen to have the name of that lacquer? (not asking for it, but I would watch a video on that whole process ;) )
@GearheadCreations
Ай бұрын
Absolutely! I might dedicate an entire video showing the build process in the future. I use a lacquer called Fotoplast Lack 3, which can be found on Aliexpress from the Soundlink store. Since this stuff isn’t cheap, I’d also recommend trying a nail lacquer by Mia Secret on Amazon if you just wanna get started.
@draglorde
Ай бұрын
@@GearheadCreations thank you!
Great job! Is this open source? I want to make them.
@GearheadCreations
27 күн бұрын
Thank you! No, unfortunately this is not open source. I am selling it as a complete product on my website with a cable, case, and tips on symphonyears.com though!
whats the input? cable?
@GearheadCreations
18 күн бұрын
It uses a standard 0.78 2-pin wired connection, but can be made wireless with an adapter
@jamesmelemede5610
18 күн бұрын
@@GearheadCreations cheers
FR for hexad?
@GearheadCreations
7 күн бұрын
Haha that’s great that you ask! I currently don’t have any public FR graph for Hexad, as I’m still working on its tune. That set should be ready around mid-summer
interesting but so déjà-vu...
@GearheadCreations
Ай бұрын
Oh?
First time here. Nice vid, nice idea but..... First 5 minutes are really waste of time and useless (except for sponsors or such?) Plus no result is shared (as audio) which on it's own is useless but if u do a comparison (before/after, DIY vs bought, etc) would be interesting to see. Sharing screenshot of charts is not really interesting
@GearheadCreations
5 күн бұрын
Thanks for watching! I’ll keep those things in mind for next video
@KaliKavala
5 күн бұрын
@@GearheadCreations thank you for taking your time and reading my BS :)
@GearheadCreations
5 күн бұрын
Hey, criticism is vital to improving future videos, so thanks for the input
Pretty cool stuff but for the love of god stop using audiophile words. You sound like a sommelier that only ever tasted the button shelf stuff.
@fallingwater
Ай бұрын
You, on the other hand, sound exactly as pretentious as every other so-called audiophile I've ever seen.
@asddsa-dy4ne
Ай бұрын
@@fallingwater I'm terribly sorry my good Sir that my reply didn't elevate to your exquisite exelence. If I am allowed, I shall offer a crisp withy reply or would a smooth apology satisfy thy tastes more.
@castffx1728
Ай бұрын
@@asddsa-dy4ne agree with fallingwater, you're the reason audiophile community gets hate. do better.
@asddsa-dy4ne
Ай бұрын
@@castffx1728 I'm not part of the audiophile community. I just don't like the word diarrhea they spew out. did you even read the original comment?