P25. How to Disassemble Toyota Camry 2.4 VVT-i engine 2AZ-FE : Balance Shafts removal
Автокөліктер мен көлік құралдары
Next video: • P26. How to Disassembl...
First video: • P1/P41. How to Disasse...
P25. Cómo desmontar el motor Toyota Camry 2.4 VVT-i: extracción de ejes de equilibrio
P25. How to Disassemble Toyota Camry 2.4 VVT-i engine: Balance Shafts removal
Disclaimer:
These videos are intended to offer general information working a car and tools.
The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
Work carefully and safely. Also avoid accidents.
Пікірлер: 46
Thank you. Shop wanted 10 grand to install new engine. Car only worth 1/3 of that when working. Was able to use your videos (and others) to change the rod bearings. Now reassembling. Wish me luck
@PeterFinnTheCarDoctor
8 ай бұрын
Great to hear!
Excellent analysis Peter! You explained nicely that the number 1 balance shaft has two gears, because one of the gears takes contact with the crankshaft!
@PeterFinnTheCarDoctor
3 жыл бұрын
Well said! Accurate job. 👍
Detail explanations. one by one word..peter finn trademark..
@PeterFinnTheCarDoctor
8 ай бұрын
👍😀
I loves your videos and how you explain thanks
@PeterFinnTheCarDoctor
5 ай бұрын
Glad you like them!
Very good video congratulación
@PeterFinnTheCarDoctor
3 жыл бұрын
Thank you! Cheers!
those bearing look like new ////those Toyota engine are made in perfection reliable for Few decades without any maintenance are very good engine
@PeterFinnTheCarDoctor
2 жыл бұрын
Yes they are
Free Advice: If your 2.4L 4 cylinder Toyota engine starts to loose oil pressure while vibrating more than usual and there's no nasty metal to metal knocking sound YET, take off the oil pan and check for chunks and debris of balancer RESIN gear plugging your oil pump pick up tube screen. I just did this today. Hopefully the customer didn't run the car(2002 Camry) hard and long enough to hurt the internals. 😬🤞 OEM parts are fairly cheap to fix it, the hard part it's probably the installation, more so if you're working on your back under the car. Nice video.🙂👍
@PeterFinnTheCarDoctor
3 жыл бұрын
👍
Good morning idol keep safe and God bless you
@PeterFinnTheCarDoctor
3 жыл бұрын
You too 😀
👍👍👍
@PeterFinnTheCarDoctor
3 жыл бұрын
👍🤠
💓💓💓💓👍👍👍👍
@PeterFinnTheCarDoctor
Жыл бұрын
👍
I just removed my 2az-fe balance shaft, the double shafts move like yours did, bad balance shaft?
@PeterFinnTheCarDoctor
5 ай бұрын
Thanks for info. 👍
Hi Peter are balance transfer problems common with 2008 3.5 v6 litter toyota velfire ?
@PeterFinnTheCarDoctor
2 жыл бұрын
No
I had a question about this but it's for a different vehicle it's for the scion tc 2016 would it be the same process.
@PeterFinnTheCarDoctor
Ай бұрын
Yes
how can you tell the balance shaft is bad? My engine makes knocking/ticking noise and I've checked everything and still can't find where the noise coming from? It seems to be from the top, but everything in specs. I also used a mechanical device to listen to the oil pan, but detect no noise.
@PeterFinnTheCarDoctor
8 ай бұрын
Balance shaft error makes hard bass drumming
if the balance shaft is not well fit, can it affect the crafatch engine 2AZ
@PeterFinnTheCarDoctor
Жыл бұрын
Yes. It makes Extra VIBRATIONS
I was advised to remove the balance shaft because it damage and causes unusual noise in my Toyota previa car,what will be the consequences
@PeterFinnTheCarDoctor
Жыл бұрын
Noted
What will happen if I do a balance shaft delete performance build ?
@PeterFinnTheCarDoctor
Жыл бұрын
the engine vibrates a little more
What size are those bolts or what size 12 point socket do you use? 15/32?
@snutmeez
2 жыл бұрын
12mm 12 point socket. Can use 15/32 if it fits snug
@PeterFinnTheCarDoctor
5 ай бұрын
Thanks and noted 👍
I think it was the clicking sound I was hearing(video on my channel) If the balance shaft gear is not suppose to move back anf forth freely, I need a new balance shaft😭😭😭
@PeterFinnTheCarDoctor
5 ай бұрын
Thanks for comment 😀👍
do you have to remove engine to repair this
@PeterFinnTheCarDoctor
4 ай бұрын
Yes
@user-gj8yc9uw8o
3 ай бұрын
@@PeterFinnTheCarDoctor no it doesnt i just got done doing it with the motor installed runs perfect
What is the work of balancer
@PeterFinnTheCarDoctor
Жыл бұрын
Noted 👍