Great video ..

@TheEtixzShow

5 ай бұрын

Thanks Friend!!!

I got a 2008 Lexus es350 I am fixing right now. Got a P0500 code throwing for the “vehicle speed sensor” not the “ABS wheel speed sensor” cause I took all 4 wheels and tires off and used a meter to test the wheel speed sensors and they all have normal range of resistance. So now I have to dig into the transmission and change the vehicle speed sensor. Everyone seems to think these are all the same thing…

@TheEtixzShow

10 ай бұрын

Wish you best luck… post back with update!!!

My 2005 Sienna has a code P0793. Is it possible to access and replace the green transmission speed sensor by reaching the hand there, without taking out the air box or other air ducts? I want to do it myself, but disassembling the air ducts parts looks daunting to me..

@TheEtixzShow

Жыл бұрын

I know it looks daunting, but thats the only way. Unless you just try removing the battery. Remember to disconnect the negative which is the black cable then the positive which is the red cable. When reconnecting battery, connect red cable which is the positive one then last the black cable which is the negative. If you cant manage with the battery route. Then the air duct is the only way. Hint, label your hoses with letters before disconnecting anything and take pictures for references on how to reconnect air duct! Good luck. Let me know how it went!!!

Good evening, I have a Toyota sienna 2007 LE and I changed the green and black sensors and I still get the code p0500, it's possible that the connectors are dirty and they have to be cleaned

@TheEtixzShow

8 ай бұрын

Anything is possible. Try cleaning them. But the problem will be to change the ABS MODULE. its responsible for sending out wrong info when faulty.

Great video however What year Sienna are you driving.

@TheEtixzShow

5 ай бұрын

2007

My car is 2006 Sienna. The engine, ABS, and Break light on at the same time. I also have PO500 code. I changed the black one flowed your video but those light still on, should I change the green one also? Thanks

@TheEtixzShow

2 жыл бұрын

Change the Abs Module.

@anthonyruan

2 жыл бұрын

@@TheEtixzShow I changed the module also, but after two days those lights come again. What else can i do Bro

@TheEtixzShow

2 жыл бұрын

Was the ABS MODULE a refurbished? If so, take it back and exchange it. Thats what happened to mine. After 2 Abs modules it was finally fixed. You probably got a defected abs module. Keep me posted.

Hey what symptoms did the car have when it was broken ? I have no speedometer, cruise, check engine light, or odometer. also sometimes stalls. did you. have these. btw my tranny was fine.

@TheEtixzShow

Жыл бұрын

I had all previous problems you mentioned except the stalling part. Im pretty sure after you swapped out the speed sensor you began to experience the stalling situation.

Speed sensor A is the blu one. De black one is the B.

@TheEtixzShow

10 ай бұрын

Speed sensor B is Green and Speed Sensor A is Black.

Can you do a correct video how to change it pls , i remove the battery and the vent but unable to see the sensor

@TheEtixzShow

10 ай бұрын

Sorry pal, no longer have car. But if i get ahold of another car similar… will do!

Hello sir, I changed the automatic transmission of my scion tc 2006 three times and I still have that error code p0793, because the recoil does not come in normally all the time, now I want to change the computer, could you give me some idea what is happening thanks

@TheEtixzShow

11 ай бұрын

Change the Abs Module, its more likely faulty.it some how got wet and corroded. I know because i used to wash my engine with the car wash pressure washer and eventually water leaked in the Abs Module and screwed things up… Same thing was happening with mine.

@ckumiche8600

11 ай бұрын

Thanks I'll let you know the results as soon as I change it, thanks for answering

@TheEtixzShow

11 ай бұрын

No problem.. Good Luck!

Are they the same part

@TheEtixzShow

2 жыл бұрын

They are two diff parts. Part numbers should be on one of my other videos.

Excuse me but I found the black sensor by removing entire air intact, filter assembly and there was the Black sensor. you seem to be saying otherwise. what's the right answer? What I mean is the black sensor is towards the back of tranny.

@TheEtixzShow

Жыл бұрын

Black sensor is considered speed sensor 1 or A

@murep

Жыл бұрын

@@TheEtixzShow never saw it listed as A , only input and output. Please say which one will fix all the problems, I’m sick of this issue.

@TheEtixzShow

Жыл бұрын

I understand. I changed both speed sensors , abs sensors for all 4 tires, all rotors and the problem persisted. It has to be Abs control module. Try swapping out the abs control module. If it gives you a different engine symptom than the previous abs control module, you know its the ABS CONTROL MODULE. Thats why it took me 3 tries until i found a good working refurbished abs control module

@murep

Жыл бұрын

@@TheEtixzShow but it’s way cheaper to swap sensors firs of all. Secondly my symptoms would not be caused by abs based my hours of reading. Did you what I had?

What’s part number?

@TheEtixzShow

11 ай бұрын

Please see this video for part number for green speed sensor 👇 kzread.info/dash/bejne/k32h0qWTZ5zNn6g.html Or its best you can just purchase the speed sensor from the Toyota Dealer. They will let you know what part number it is (Black Speed Sensor)

@jalol190

11 ай бұрын

@@TheEtixzShow the one I am looking is for 2006 sienna

Hey there I “knowest” my speedometer is not working on my 1998” Toyota Camry so”😂” when I drive my car the needle dont move at all 😂” I will check it out thank 😊”? Bye from lightning 😊”

@TheEtixzShow

7 ай бұрын

Good luck