Wonderful work sir! I believe this is exactly what is going wrong with a vehicle I've been diagnosing at work for p0500, genuinely appreciate your excellent overviews of your diagnostic steps 👏🤘💚😀

@codysautodiagnosticsprogra8706

3 жыл бұрын

Thank you! Little tip, bang on dash and see if you can see drop outs.

Nice Job! Glad to see someone like you actually DIAGNOSING and not just launching the parts cannon. Keep up the Great Work.

@codysautodiagnosticsprogra8706

2 жыл бұрын

Thank you Daniel!

Great video Cody! And a perfect explanation and diagnosis of that circuit! Thanks for sharing!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks bro and appreciate the help

Completely unexpected level of detail and troubleshooting skill! Well done!

The superimposed format works well in this video. Great job! I know how long it takes to film/edit a nice quality video like this one. I have a new employer also, since last October and finally up to speed. Hope it works out great for you.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks a lot buddy I really appreciate that. I tried something new with the superimposed after watching scannerdanner and super Mario, and seems to work nicely. Good luck at your new shop!

Great job Cody! Nice to see you back. Thanks for sharing 👍

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy!

Cody, I know this is an older post but I want to thank you for your clear explanation and diagnosing the code. I have a Lexus that throws the P0500 code (times three) and yet the car has been running fine for over a year. My speedometer operates fine. I am not a mechanic but wanted to see how big a problem this could be. I am now a subscriber! I hope you are liking the new company/shop.

@codysautodiagnosticsprogra8706

3 жыл бұрын

Thanks for the kind words buddy. If your vehicle is only throwing the code every once in a while I may wait tell it’s more repetitive and then get it repaired, that’s if it was my car anyway

Thank you Cody great video explaining and diagnosing the problem I currently have the same issue with my 2005 Tacoma And you are one of the only one properly explaining how everything works thank you again and keep up the great work will be subscribing 🙏🏾

Hot damn, Cody is back with a nice screen overlay and some fancy edits! Great video, I love the process and you did an excellent job of explaining the process along the way! When you grabbed the signal at the ICM and it was GTG, I was thinking for sure you had a wire issue in the dash and it was about to get messy. It's always frustrating when you go to the next testing spot and it fixes itself because you're like "oh boy, is it going to be one of those where I can't recreate it or...?" I also like to see how other guy's approach it...l was thinking of doing a bypass test using a test light to B+ down to your piercing probe at the ECU with it disconnected and grounded to rule out wiring, but you were able to get it to act up again, then I'm like yup...no sense in wasting time on that approach since you got her to act up again! Crazy how your video made me think about it and keeps me guessing which way you're going to take it! Then seeing how everything changes when something happens like that. In either case, it's GREAT to see you are doing well at the new shop and have found a way to make some videos man! I really liked this one bro, fun stuff!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Bro your absolutely right and I love watching others attack a situation and see how they would go about it. Always learning new tricks to help our diag approach

Great video and process. Glad to see you back!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Great video. Working 07 FJ with a P0500 and this helps a lot. Thank you

@codysautodiagnosticsprogra8706

4 жыл бұрын

Happy to help!

Glad to see you back, nice diag

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks Mike, happy to be back lol

Great video to return with, hope there is more to come

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you, got some more videos coming soon

Great diag video Cody! Welcome back bro! 💪

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks brother

Good to hear from you man! Great video!!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks brother, glad to be back

Good job. Glad you are back.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy, happy to be back

Ah! Thanks. I have been using a toner/tracer to trace the wires out. I found the Red/Yellow wires for the VSS, and the toner led me to the park/Neutral Switch.

Interested I appreciate all efforts giving out to lean people our diagrams diagnosis keep it up great job

I was wondering what had happened to you I love your videos keep it up

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy, happy to be back

This is the best solution for the code thanks alot you've reliefed us

Nice video and a great diagnose . Good that you double checked that cluster outgoing signal instead of looking for a broken wire .

@codysautodiagnosticsprogra8706

4 жыл бұрын

Haha thank you and I’m happy I didn’t start chasing a wire issue

@beluxauto5968

4 жыл бұрын

@@codysautodiagnosticsprogra8706 To be honest , it happened to me . Wanted to be fast. My behind is still hurting if I think about that one . Didn't even check resistance. Dove straight into ripping the dash apart.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Belux Auto oh man 🤦‍♂️ I’ve been there so I know the feeling. Lots of time wasted but was a good learning experience

Somebody is using Jorge's color coding from Super Saturday. Good for you Cody, keep the info coming!

@codysautodiagnosticsprogra8706

4 жыл бұрын

😂😂 you caught me

Very good diagnosis strategy thanks for sharing

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy, I also appreciate you watching

Didn't get notifications Glad to see your back Great video. Thanks

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy!

Amazing work 👍🤙Thanks it help me a lot...

@codysautodiagnosticsprogra8706

2 жыл бұрын

Glad to hear that!

Wow that was really cool case study thank you

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks for watching buddy

Oh come on now overlaying the scanner screen on top of the video ? How the rest of us supposed to compete with that , Loved the video man lol , great touch with the overlays .

@codysautodiagnosticsprogra8706

4 жыл бұрын

Haha picked up the overlay idea from scannerdanner and Mario. Thanks Doug!

A bad wheel speed sensor can cause a P0500 code on a Toyota Tacoma. The Vehicle Speed Sensor (VSS) and the wheel speed sensors are part of the vehicle’s speed monitoring system. In many modern vehicles, the ABS system (which uses wheel speed sensors) communicates with the vehicle’s main computer (ECM or PCM) and can influence the vehicle speed readings. If a wheel speed sensor is malfunctioning, it can disrupt the signal that the ECM receives, triggering a P0500 code. The total cost for all four wheel speed sensors is $25 with free shipping on eBay. Replace all four wheel speed sensors and clear the P0500 code. Drive the vehicle as usual, If the P0500 returns then replace the one vehicle speed sensor on the transmission. There's nothing wrong with the cluster in this video. It's a common mechanic shop scam, he knows the truck owner is desperate because of the emission test failure. He overcomplicated an easy job on purpose to get more money out of the customer. .

Great video Cody , people tend to disregard pin tension a lot . Always a plus when you can repair a part like a cluster as I'm sure it runs at least a few hundred plus programming .

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you, pin tension has burned me in the past so I always try to rule it out. This cluster was definitely couple hundred plus programming.

@markhb3346

4 жыл бұрын

Just has a pin fitment issue on a 08 Ford with the 6.4L , was setting a DTC for FRP sensor being erratic (P0194) . At first I used our Launch Torque to graph the FRP sensor PID. Nothing looked unusual except 1 random spike at about 2500 RPM that appeared every so many frame blocks. It would then reduce engine power until next key cycle and at 2500 RPM do it again . I couldn't call a Pump yet because I could command the FRP all the way up and down just off idle and it followed . So I knew something wasn't right and I was missing something .. So I tossed the Launch and grabbed the IDS.. And man what a difference does refresh rate make a big differences. With the IDS graphing the PID at that sweet spot of 2500 RPM you can see nothing but hash from the sensors offset of 1.5V to 5V like it was rapidly toggling the sensor Low Ref off and on a few hundred times a sec . Had on of the other guys pull the valve cover yesterday and they informed me when they looked at the connector it looks like the ground pin was a little spread like someone had a probe in it . I pulled the history and it was suped out to a local Diesel shop Nov of 2018 and they replaced supposedly the high pressure pump but who knows how they diagnoses it . I'm thing they shoved a Tpin or paper clip in there and it had just enough tension to hold up until now ... Weird .. But I learned a lesson and that's scope everything even a sensor that has PIDs.. And I learned the IDS has an insane refresh rate lol

@markhb3346

4 жыл бұрын

By the way it's Mark from Yuma lol , sorry man I up and abandoned FB man just way to much drama 😂😂😂

well done cody ! ur a good teacher

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

He's back!!

@codysautodiagnosticsprogra8706

4 жыл бұрын

I can’t believe it’s been 4 months 🤦‍♂️

@CubasAutomotive

4 жыл бұрын

@@codysautodiagnosticsprogra8706 hey, it happens. Priorities! 😉

Excellent Vids and Explanations......Subscribed.....

@codysautodiagnosticsprogra8706

3 жыл бұрын

Greatly appreciate that, thank you!

Great video bro, Keep it up

Thank you very much you give me more hope before remove the transmission..

@codysautodiagnosticsprogra8706

Жыл бұрын

Happy the video helped

Awesome!

Nice vid as always Cody. Always good content laying out the logical process of diagnosis. Sometimes I watch these videos to refocus myself when I'm doing diag.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you, I couldn’t agree with me more and why I like watching other channels to broaden my knowledge on diagnostics from others

Great vid and diag👍

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Good work!! 👍👍👍👍👍👍👍

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy

good diag very proffessional cody!!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you so much

You're awesome man! Used your video to start diagnostic tests with this code on my 06 tacoma. Lifted the truck and brought it to about 20mph on the speedometer but engine diagnostic showed 0. I'm curious about what diagnostic software/ tools you use? Especially when testing the pins that go to the pcm and instrument cluster. I work in construction and am handy but not close to a mechanic. Tools make all the difference. Thanks again doe for the video!

@codysautodiagnosticsprogra8706

2 жыл бұрын

Glad I could help!

great diag Cody thanks

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks for watching buddy

Good job Cody 👍🏻

I got the P0500 code on my 2000 100 Series Land Cruiser. My speedometer flickers sometimes up and down, doesn't work sometimes, and then works suddenly. Mostly when it's extremely hot out it gives me problems. Going to start trouble shooting, but based on the symptoms I believe it's the plastic gear wheel in the unit under the car. No ABS light or issues relating to the ABS.

Awesome Video

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Fantastic job sir cool

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Nice job!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

i got fix Thank you very much

Cody- I have an 07 Prerunner 4.0 V6 with symptoms: P0500 code, C0210 & C0215 RR & RL wheel speed sensor codes, C1239 "Metal Stick to speed sensor code, ABS & eBrake lights on, Check engine light on, spedometer not working, & gas gauge unstable. Cruise control hasn't worked for a while, not sure if its related. Already replaced a wheel bearing, wheel speed sensor, & VSS. Any thoughts?

welcome back.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Hi I stumbled across your video doing a Google search for P0500 A. I've been driving with the check engine light for 2 years now like that its not affecting my drive at all. The speedometer works fine. The only issue I have is my fuel gage doesn't work I have to go by 300miles to fill up, and my ac and heat fan works when it wants to, but I don't think that would set off that code. I have a 2005 Tacoma that didn't pass smog check in California and I need to get it fixed to get my tags. My mechanic friend wants to drop the transmission to change the sensor there but if the speedometer works I'm guessing its probably not a good idea. Thanks for a very informative video.

@codysautodiagnosticsprogra8706

3 жыл бұрын

Did he diagnose it as a bad sensor in the transmission or is he just throwing parts at what he “thinks” is wrong?

@guillermoparedes6450

3 жыл бұрын

@@codysautodiagnosticsprogra8706 he's just throwing parts at it. I told him let's hold off as I'm going to try to find someone who can diagnose it correctly. From what I gathered if its the sensor in the transmission then the speedometer wouldn't work, and it works fine. Would a faulty gas gage that works sometimes but mostly on E be a bad cluster or its definitely a float?

Please what is the brand and model number of the Scanner that you used in the video, or the best you can recommend? Please reply. Thanks.

I’ve had this code for about 8 months and have been driving it. Not too sure if that’s okay or will some potentially get worse?

Better everything (it sounds like) and if your happy, I'm ecstatic!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Exactly! Thank you

Great video. Hope all goes well at your new digs.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy

Great job explaining and diagnosing this . I’m currently going through similar issue with a 3.0! Avalon. ABS Light and check engine . All wheel sensors are good and engine speed sensor is good . Speedometer is out and code is generic speed sensor code . Leading me to thing it’s the cluster as I went over a decent bump the other day and it all started working again. Anyone know if the cluster is swapped out does it have to be programmed to the ECM Or straight swap. Subscribed . This is the first video that I’ve seen that diagnosed this issue with cluster.

@codysautodiagnosticsprogra8706

3 жыл бұрын

Thank you! On this vehicle when we put a mew cluster in the mileage had to be programmed. I know the auto pro pad tool will do the mileage correction.

@chrisdoe6890

3 жыл бұрын

Cody’s Auto Diagnostics thanks for reply Cody. I did remove the cluster and checked for loose connectors but couldn’t get Speedo back. This is a mid 2000 year model. California car if it matters. I also know the ABS control computer can fail on these. I’m not overly concerned with mileage on cluster reading if I swap out. But will the car start because of anti theft chip or similar if swap cluster ?

What scan too do you use for the test / scope meter?

Hi Cody, good to see you. What scan tool/ scope are you using?

@codysautodiagnosticsprogra8706

4 жыл бұрын

Hi buddy, I’m using the Snap-on Zeus.

Congrats on the new job! Great video!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks buddy

Thank you

I put an aftermarket transfer case in my truck with 1 ton axles. Having no abs I might not have enough signal to pass deq still?

Thank you so much for sharing this. This is exactly what's happening to my 2013 Toyota Highlander. I installed an aftermarket radio and probably shorted something along the process because my engine light came on and the error code is P0500. I took my car to the local mechanic and I don't think they performed the same tests you performed in this video. I have all of the symptoms: speedometer and tach are working fine but I don't have cruise control. I am going to try to contact another car shop for a second opinion, and this video will really help me understand what needs to be looked at. Can I purchased a used instrument cluster and have it installed?

@codysautodiagnosticsprogra8706

2 жыл бұрын

Happy this video could help!

@Duran888David

Жыл бұрын

I have the exact situation happening with my 16 tacoma. Installed aftermarket radio and have struggling since. Did you ever manage to find a solution?

@eevwnxx8062

Жыл бұрын

I have same problem in Toyota Alphard anh10, after change an aftermaket headunit my check engine show that code p0500 A, how do you fix that problem? Thanks

Nice vid. Have 11 tundra p0500. All 5 sensors working and accurate. Still code. Spedo work fine. Baffling.

@codysautodiagnosticsprogra8706

Жыл бұрын

Interesting

What software you use for diagnostics?

Hi great video. I have the same problem on 2014 tundra 5.7. i replaced the cluster but the problem continues.The wheels speed sensor working in all wheels.the wiring is good.Any idea if is posible that the ecm is the problem

@codysautodiagnosticsprogra8706

2 жыл бұрын

It’s a good possibility the ecm is at fault

I have that code show on my Toyota Alphard anh10 after i changed aftermaket radio, everything work proprely on my sensor, engin and my speedometer, any solution for that sir? Thanks

Great job and good luck in the new facility

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thank you!

Great video. I have an 04 Tacoma with P0500 code. Riding down road before light the sellers odometer does crazy stuff up down then to nothing. I don’t have access to meter like you have just advance auto to get code. I have vid of speedometer if helps. Vehicle runs fine. The mileage shows up but doesn’t change. What would you do?

@codysautodiagnosticsprogra8706

3 жыл бұрын

It’s kinda hard without a scan tool or a scope buddy. I don’t want to tell you it’s definitely the cluster and have that not be the issue

@thenock81

Жыл бұрын

Did you ever find the issue? My 2001 just did that exact problem this weekend.

Hard call nice fix.

@codysautodiagnosticsprogra8706

3 жыл бұрын

Thank you!

hold up... so the signal going to the ECU is the digital signal of the speed sensor (ABS Module) @ Connector E7 pin 8... - all i see as far as the schematic goes; that wire (pin 19) at the instrument cluster is called the Violet/white wire... it doesn't say something like : Vehicle speed signal... although its very blurry and hard to read but i trust you :)

Hey Cody do you flash pcm,s.if so how much? And when and where??,I have a 2001 Jeep Grand Cherokee.thank you

@codysautodiagnosticsprogra8706

4 жыл бұрын

Yes sir I do. I’m in Tucson Arizona. Is this a reprogram or a new pcm install?

thanks

Hello engineer Cody. I have similar issue on a 2017 Toyota Fortuner pls I need your help. Will be eternally grateful for a help. Thanks

What's going on!? I didn't get a notification!! Missed you bro welcome back!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks brother!! It’s been wayyy to long. Had to borrow some ideas from your last couple videos in the editing department 😂

My 2008 tundra is throwing a p0500”a” my speedometer does not work my 4hi 4low lights are flashing and my abs and brake lights are on I have no cruise control either. In this video you said since the trucks speedometer is working it’s probably not the transmission speed sensor So would this mean since I have no speedometer that it “is” my transmission speed sensor?

@codysautodiagnosticsprogra8706

3 жыл бұрын

More then likely buddy. Not having a speed signal will effect cruise and some other things like abs as well. I would check the sensor and wiring next

Why would I get an 11V square wave coming in and out of the cluster?

How do I solve this problem vd j the wiring seams to be fine am suspecting abs ECU

Would this cause my reverse to stop engaging on my lexus is250?I get this exact same code p0500 everytime I hit the throttle.Already changed my wss and transmission speed sensor but still have this code.

@codysautodiagnosticsprogra8706

Жыл бұрын

No it would not. That sounds like a internal transmission issue.

I’m having this issue and am bringing this to a mechanic in the next day or two. Aside from telling him to watch this video, how would I best communicate for them to check this as a part of their diagnostic process?

@codysautodiagnosticsprogra8706

Жыл бұрын

Hello Ben, you will want to inform them to check the vehicle speed signal at the pcm and also at the cluster to verify.

May I ask what the approximate cost of this repair was? Thank you Cody....

@codysautodiagnosticsprogra8706

3 жыл бұрын

Hey Tim, this repair was about $700

Glad to see ya back on here! Nice video man, love my aeswave kit too!

@codysautodiagnosticsprogra8706

4 жыл бұрын

Thanks brother!

Man I’m not trying to be weird but where do you Live? I thought you were in AZ but it looks cold in your Video. I’m in Central Tx & it’s like 80 today. One of my Sons is a tech in Tucson

@Ken-wu6hr

4 жыл бұрын

Ok you said later you’re in Tucson also

@codysautodiagnosticsprogra8706

4 жыл бұрын

Haha sounds dumb but after being here 20 years after moving from Colorado I’ve got spoiled with warmer temps. This was filmed about a month ago and there was a cold front at them time, plus 6:30 in the morning doesn’t help. By 10 am it’s like 75 degrees 😂😂

@Ken-wu6hr

4 жыл бұрын

Cody’s Auto Diagnostics man I grew up in Wisconsin. Did all the winter Crap. Even camping outside in the winter making our shelters. I’ve been in Texas over 30 yrs I don’t do cold either. But I don’t even own a coat. If it’s that cold I’ll stay in. Close my bay doors & fire up my heater?

@codysautodiagnosticsprogra8706

4 жыл бұрын

Ken Schmidt haha I hear ya buddy, only problem is here we have to keep our doors open and the way the shop is designed we get crazy cross winds.

Thank you for this video, Cody. Saved my ass. Had one come in just like this, 2005 Tacoma prerunner 4.0l. However both pro demand and all data show incorrect wiring diagrams for me. They indicate a speed sensor on the rear diff…

Hi. From South Africa. Looking to buy a pressure pulse transducer. How can i do it. Thanks

@codysautodiagnosticsprogra8706

4 жыл бұрын

Hello, if you can send me an email at CodysAutoDiagnostics@gmail.com I will be happy to get a pulse sensor mailed out to you. Hope to hear from you.

👍🏻👍🏻

Is there a follow up video? What happened? If a new cluster is installed, does it need to be programmed for the vehicle?

@codysautodiagnosticsprogra8706

2 жыл бұрын

Cluster came with mileage already installed, no programming needed

@Acosta-on7do

2 жыл бұрын

@@codysautodiagnosticsprogra8706 where did you get it from?

@codysautodiagnosticsprogra8706

2 жыл бұрын

@@Acosta-on7do company here in Tucson who has now went out of business. Do you have a cluster you need mileage corrected in? If so you can send me an email at codysautodiagnostics@gmail.com and I maybe able to help. I now do eeprom and mileage correction on cluster

@Acosta-on7do

2 жыл бұрын

@@codysautodiagnosticsprogra8706 I just confirmed that a Tacoma needs a cluster (your video was great help by the way), but I’m still waiting for approval from the customer

Do you have the number of the guy who repair the instrument cluster, I have the same issue

@codysautodiagnosticsprogra8706

2 жыл бұрын

I don’t recall the company who repaired it, sorry

Whare the cluster located

So what was the conclusion here? Are we still waiting for an update? Can this problem cause emissions issues? I'm in California.

@codysautodiagnosticsprogra8706

4 жыл бұрын

Earl Spencer sorry buddy but did you watch the video? I mentioned the cluster was at fault and also mention this will cause emissions issues, just like I mentioned in the video. I also mentioned the light being on was the reason they needed to get the light fixed.

@earlspencer7863

4 жыл бұрын

@@codysautodiagnosticsprogra8706 Hello thank you for the time to comment. Yes I did see that the problem was behind the cluster but it wasn't clear whether the whole thing had to be replaced or was it just a connection?

@codysautodiagnosticsprogra8706

4 жыл бұрын

Earl Spencer it needed a new cluster assembly

👍🏼👍🏼👍🏼

Hi, I have a similar issue with my 08 Camry. My speedometer is working fine, all ABS wheel Speed Sensor including engine speed are working fine. But I’m still getting a check engine light on with the code P0500. I also changed my cluster and still having the issue. Any idea or tight on what I can do? Thanks

@codysautodiagnosticsprogra8706

2 жыл бұрын

Possible wiring issue.

👍👍

@codysautodiagnosticsprogra8706

4 жыл бұрын

🤘😂

Will the Tacoma drive without the cluster?

@codysautodiagnosticsprogra8706

3 жыл бұрын

Yes it will.

@triple6758

3 жыл бұрын

@@codysautodiagnosticsprogra8706 Thank you for the quick reply. I think my truck is in the same boat as the one in your video. It's my daily and I have no backup. Subbed for helpful answer!!

I've seen so many of these lately ''bad connection'' it's like a pandemic.

@codysautodiagnosticsprogra8706

4 жыл бұрын

No kidding? Funny how that works seeing batch of failures

what was the solution?

@codysautodiagnosticsprogra8706

2 жыл бұрын

You obviously didn’t watch the video since it explains everything.

@Overland007

2 жыл бұрын

@@codysautodiagnosticsprogra8706 sorry, im mexican and my english is bad

Not to sound ignorant, but wha t is a drag test?

@codysautodiagnosticsprogra8706

2 жыл бұрын

Drag test is testing the pin fitment in the connector.

@garysuarez9614

2 жыл бұрын

@@codysautodiagnosticsprogra8706 Thanks!

I had tha same code on 07 Toy Avalon and it kicked me in the balls.. it turns out to be a burnt ABS module

@codysautodiagnosticsprogra8706

4 жыл бұрын

Oh wow, I haven’t run across that yet, I’m sure I will eventually, Thanks for the heads up

Keep Calm and Eat EEGEES 🥪🥤

@codysautodiagnosticsprogra8706

4 жыл бұрын

Haha don’t have one next door anymore but still love the place

i think all of this computer stuff isnt needed.

👍🏼👍🏼