Thank you. This was exactly what I needed to know and how to do it. I didn't need to splice it but if the connector didn't fit and I didn't know how to do it, it was good to include that info for people that don't.

Thank you so much! It worked.

Thank you very much! Fixed my problem.

Thank you so much my sir

I changed the oven probe, it worked two weeks. Now, I am getting an error F14 on my Frigidaire model FPEF3081KFB. Any ideas? Thank you!!

thanks my friend

I have a belling double oven it keeps cutting out on the top oven bottom elliment. How do I find out if it's the working thermostat or the over temp stat its an intermitent fault

THANK YOU, THANK YOU, for this in depth information on how to get this job done because I was getting ready to run back to the store and tell them they gave me the wrong part because the connectors wasn't holding together. Thank you again!

Hello, I have an older ge oven, model jbp76gs3ww. After a self clean the stove tops work, but the door is locked with no display lights and the oven no longer works. In searching online the thermostat fuse is the likely culprit but I'm having difficulty funding it. In taking off the upper back panel, the thermostat has a circuit board with components and a component that looks like a mini transformer with 2 fat 'winds' on it - but nothing that looks like a fuse. There's a 'connector/coupling' plastic splice thing that looks similar to what you replaced - but one wire goes to the oven light indicator and the other to the surface light indicator - so I'm guessing its just a connector for easy wiring etc. Do you have any other ideas as to where the thermostat fuse might be? There's many wires going in to under the stove tops, but I don't know if I can access that and raise the top with the door locked. Any help would be greatly appreciated. This model might involve replacing the whole thermostat circuit board or something, I don't know. Its a small brown circuit board with components - screwed to a larger green circuit board. Thanks for your time.

Hi there Please provide the information where to buy the sensor ASAP THANK YOU

An Ohm test on what you think is a bad part, first, and secondly why the re-wire job needed? should be plug and play with the correct part!!!

I have that exact same model and the exact same problem! what is that part called and where can i find one with the proper connector? thank you! video was helpful!

My electricity goes off when I turn oven selector and suggestions plz?

Instead of changing plugs why not buy the probe with matching plug?

@partselect

7 жыл бұрын

Good question. The manufacturer has elected to supply only a limited number of replacement temperature sensor variations and therefore modifications to the harness connector may be required. The specifications of the sensor are typically the same for thousands off models, but the configuration of the connector varies from model to model for reasons unknown to us.

@BrandonCockridge18

3 жыл бұрын

@Michael Murphy ahahahahahahah

So how do you test if your oven is reaching the right temp? We have an oven for about 9 years now and it seems like its not reaching the right temp anymore. It cooks food but food seems to be taking a long longer to cook and trying to make brownies or other baked goods can be difficult to time if its not cooking at the right temp.

@partselect

7 жыл бұрын

There are oven temperature thermometers available from hardware stores and appliance retailers that you could try, although they may not be precise enough. Most electronic ranges using thermistor style temp sensors will have a self testing method available through the electronic control. What is your model number?

@nutfield7678

6 жыл бұрын

The temperature of my oven can be programed for an offset of +/- 35 degrees F. Check your owners manual.

Question I had changed the heating element in the oven (cause some grease got on it a it broke the heating element) but my oven still wont come on will the temperature sensor fix my problem? I have an electric stove.

@arcollins040thomas8

3 жыл бұрын

Did that fix it? My heating element is working so I’m thinking it’s the censor for me.

My oven floating temperature while baking and ruining all of my wife's baking. Any idea what could go wrong? Sincerely, thank you!

@ushouldntjudgeme3683

Жыл бұрын

Exact same problem yesterday, wife not happy about her Christmas cookies. I have replaced the temperature probe awhile back and the baking element a couple years ago when it broke in two and stopped working. Any ideas?

Question Where is timer my electric stove automatic off after 2 minute

Question: Does it matter which wire connects? The quick connect on my wire harness melted, so I will need to use ceramic wire connectors to connect the new sensor to the harness. Do the wires need to be connected (like hot and neutral on lights) or doesn't it matter? From the video, it looks like it doesn't matter but I want to be certain. Thanks for any help.

@partselect

Жыл бұрын

The wires are not polarized so then can be interchanged. Using ceramic connectors are best for those connections.

Hi Steve I have a NEW frigidaire oven that keeps beeping showing F90 and dr what should I do to stop it? It won't allow my oven to bake anything

@partselect

7 жыл бұрын

What is your model number?

@amhv35

7 жыл бұрын

PartSelect 79074233310

I was able to replace the control board, and the cook top is working. However, the buttons that control the oven will not work.

@partselect

6 жыл бұрын

Hi Carla, What is your model number?

What was the reason for splicing the wires instead of putting both wire connectors together?

@amyschmidt1113

2 жыл бұрын

My question too

@southpawje

2 жыл бұрын

The new sensor plug in connector didnt match the end coming out of the oven. So he cut the connector off the old sensor and put it on the new one

@danielcraig8044

Жыл бұрын

Ok that make sense he didn’t explain that

My model number is FFEF3015LS I'm ready to take a sledge hammer to mine as it is constantly flashing F10 with the only way to get it to stop is pulling the whole oven out. It doesn't even get that hot as my food is always under cooked. Is it okay for me to just rip this annoying part out and leave it out.

@partselect

6 жыл бұрын

Hi, when researching the fault code F10 for your model, the manufacture suggests it could be the oven temperature sensor probe or the electronic control board. If you unplug the range and access the temperature sensor you can check the resistance of the sensor with an ohm meter. If the ohm meter reads 2500 ohms or higher, then you have a defective sensor causing the issue. If the sensor is okay i would then check the control board connection in the range.

Why didn’t you just replace the whole thing without splicing it?

@user-dl1jg7qn2y

11 ай бұрын

I was wondering the same

hey I have a question please my oven keep showing the F1 error is it the sensor or something else model number FES367ABG serial number NF34407354 THANK YOU

@monssifnexus3744

7 жыл бұрын

and how can I solve it is it the sensor

my electric frigidaire oven is taking a long time to heat up what could be wrong

@partselect

4 жыл бұрын

Hi David, here's a link to our repair center page that should help you troubleshoot your oven's issues: www.partselect.com/Repair/Range-Stove-Oven/

What tool do you use to tske off the back panel of the stove

@robunderwood4763

Жыл бұрын

1/4" nut driver, 1/4" socket, or S01 square bit. MUCH EASIER to use the socket or nut driver

WHY are you cutting the old connector off???

Why don’t you guys sell a probe with a connector that actually matches 🤦‍♂️🤦‍♂️🤦‍♂️

Listen, we are the consumers. We deserve quality products, from respectable company's who have enough INTEGRITY, to stand behind their product. To keep breaking down at the owners expense, is not what we signed up for. So, do like me! Dont ever by Frigidare again. Warn your families and friends. Share this all over social media. We have to let our voices be heard. We want quality products. We demand quality products, because the dollar is worth less, and much harder to earn in this day and age.

@anetriusharris5266

4 жыл бұрын

What is the best and steady appliance brand then?

It would have been a god comment to add that "IF the connector doesn't fit this is how to remedy that." My 1st thought was "Why did you cut of the connector if the new one had one?"

Oven says F2 what does that mean

my oven works for like 10 min then cuts off what could that be.

@partselect

7 жыл бұрын

What is your model number?

@vgbobadilla

7 жыл бұрын

PartSelect mod # FGF378ACH

This is terrible. Right at 1:06 when you're zeroing in on critical steps, the camera is too far away to see anything!

@jamesmccormick211

3 жыл бұрын

At 'locating the temp sensor' and shortly beyond, we cannot see what is happening.

he didn't actually connect the wires. he only stuck them in the plastic tube and crimped them. how exactly do wires that are not connected work?

@ronalddmccall6154

5 жыл бұрын

The connectors are metal and so it acts as the conductor between the 2 wires

I guess none of us, were smart enough to consult the consumer guide first. Frigidare products are the worse. It is not a quality product, and service stinks too. I wonder if their appliances were made in China. Then you have a service repair guy stripping and splicing, instead of installing a new part. That is for the birds.

@solerf13

6 жыл бұрын

suckerpruf agreed,you can splice but you use porcelain wire nuts and dont use the old plug, its not needed, also make sure your tech is not an alcoholic with withdrawls who shakes like a leaf😂😂😂😂