ornithopter "patapata6" First flight test
"patapata6" First flight test
ラダー回転方式を採用
Ladder rotation system adopted
初期飛行テストのため今後改良改善必要か。
Future improvements improvement necessary for the
initial flight test
Width 160cm
Length 65cm
Total weight 281g
Battery 2cell 450mAh
Motor CF2805 2840kv
Пікірлер: 98
Absolutely beautiful!
Wow! I really like the way it looks when it’s flying, it’s like the wings have a joint. Really natural looking flapping. Congrats! :)
@y.takemura8488
5 жыл бұрын
Thank you.
Control tower this is Maverick, requesting a high speed fly by!.... Negitive Maverick pattern is full. Then this thing comes by...... Controller is like WHAT THE CHEERIOS was that thing! Lolol. Nice job on the bird my friend!!!!
Perfect project my brother😊
後半、風をつかまえて 風に乗っていたように見えました すごくいい感じです
@y.takemura8488
7 жыл бұрын
ありがとうございます。
That's so coool!
Beautiful! Where can I buy one?
Can you please make the video how you have made it with it components
Génial ce vol battu ! On pourrait utiliser ce système sur les aéroports pour effrayer les ''nuisibles''...
even has it's own bird sound
amazing flying machine, would like to see the upgraded version of it that has low noise
Sir can you provide me much more details of this as even I am trying on this so please can u help me out, or else is there any possibility to buy this one ?
Wow cool
@y.takemura8488
5 жыл бұрын
Thank you
Hi, I wanted to know if you could provide me the sketches you have planned for the flight with the servos on arduino. I'm trying to understand but it's very difficult. Thank you and I congratulate you both on the hardware and the software.
@y.takemura8488
5 жыл бұрын
As for arduino, it is possible to browse commentaries of many people on the Internet etc. In addition, there are also a lot of information about the servo driving method, so if you learn and do your best, I think that learning is possible. I think it is essential to understand in order to make it behave according to hope. Please do your best. Reference information: www.rcgroups.com/forums/showthread.php?2765781-Arduino-Servo-Flap-System
Nice skill wow 😎👍
@y.takemura8488
3 жыл бұрын
Thank you
It makes a lot of noise, but for the rest.. 👍🏻
It's iinteresting t see the flight evolution of mechanical bird, from rubber band mechanism to a more mechanical system.
Can you provide it's blue print.
Very Nice Bird! Only landing it needs be softer.
@y.takemura8488
5 жыл бұрын
Thank you
Nice bro please make a viedo how to mke this bird thanks for uploding this viedo
@y.takemura8488
5 жыл бұрын
Thank you
As you said in the comments that you haven't used an arduino board for controlling the servos then how did you manage to give 2 servo all the movements when you altered your tail design to inverted v tail. Im just curious and i really like your design. Thank you for inspiring us.
@y.takemura8488
4 жыл бұрын
The control method is the same for the rotating tail and the inverted V tail. V-tail mixing control is used on the transmitter side.
@LaxmanKumar-xj8jm
4 жыл бұрын
@@y.takemura8488 what material have you used for wing materials. That white sheet is made of which material and where can we get it
@y.takemura8488
4 жыл бұрын
The material is Power Lip T6016 (33g / ㎡) white. I think that the place of purchase is different in each place, so please search online.@@LaxmanKumar-xj8jm
@LaxmanKumar-xj8jm
4 жыл бұрын
@@y.takemura8488 thank you for the update I seen you've used arduino board for some ornithopter. For this particular model have you used arduino boards.
@y.takemura8488
4 жыл бұрын
@@LaxmanKumar-xj8jm I used the arduino board for the servo direct drive model, but not for the brushless motor + gear model.
good
@y.takemura8488
3 жыл бұрын
Thank you
Please plans Sir....🙏🙏🙏
I want to make it,can you tell me how to make,,,,or can you give a 'how to make 'paper
How to made remode control system shows
@y.takemura8488
5 жыл бұрын
Use a common receiver, tail control uses V-tail mixing. Equipped with a self-made glide lock system. (In this video, Glide Lock is not working properly!)
Show
@y.takemura8488
5 жыл бұрын
Thank you
Muy bueno!!!! Cuánto tiempo vuela?
@y.takemura8488
5 жыл бұрын
El tiempo de vuelo es de unos 3 a 5 minutos.
@flag2612
5 жыл бұрын
@@y.takemura8488 buenísimo gracias, lástima que acá en Argentina no llegaron todavía 😥😪
Can you give the connections with Arduino
@y.takemura8488
4 жыл бұрын
This bird does not use Arduino.
How to connect the carbon rods?
@y.takemura8488
4 жыл бұрын
Cut a tubular mesh called Lillian on the tip of a fishing rod to the required length, stab it on a carbon rod, bond it with Aron, wrap it with a nylon thread of about 0.3mm, fix it with Aron.
Is that your own design or did you use a kit?
@y.takemura8488
5 жыл бұрын
It is all original.
@watchtowerdefence571
5 жыл бұрын
You must have a lot of experiance in makeing this sort of thing well done. Have you ever tried to make some sort of body fo hide the motor and gears?
@y.takemura8488
5 жыл бұрын
In small machines, there are things that have covered, but with this type, there is not.
It also make noise like bird
@y.takemura8488
4 жыл бұрын
Thank you
Do you have plans.
@y.takemura8488
5 жыл бұрын
The future plan is undecided.
@javieruriel
5 жыл бұрын
y. takemura I mean plans of that project how to build it.
Hi i want to buy this how can i contact you
@y.takemura8488
4 жыл бұрын
We do not sell.
hello plz help me in making this ornithopter ? i need help in the flapping mechanism.
@y.takemura8488
3 жыл бұрын
The activity is currently suspended.
@jayshingadiya2241
3 жыл бұрын
Can u give me the list of components plz..
@jayshingadiya2241
3 жыл бұрын
Just and overall idea.
I wonder if a raptor has ever attacked it?
@y.takemura8488
5 жыл бұрын
Birds are used to it because of radio control airfields. There is seldom to be attacked.
What type of clothes is used for feathers...plz...
@y.takemura8488
3 жыл бұрын
Power lip T6016 (white)
@nokzangbtizit6882
3 жыл бұрын
@@y.takemura8488 sir...can u Sen d link of the meterial used for feathers from any website ....
@y.takemura8488
3 жыл бұрын
@@nokzangbtizit6882 www.d-tex.jp/index.php?main_page=index&cPath=102
@nokzangbtizit6882
3 жыл бұрын
@@y.takemura8488 thanks a lot sir...
very nice ... do you have design plan? shall you share it to us?
@y.takemura8488
5 жыл бұрын
Please refer to the image if necessary.
I want to order 1 sample. Can you sell it to me. VietNam.
@y.takemura8488
4 жыл бұрын
We do not sell at all.
@thinhhuynh585
4 жыл бұрын
y. takemura I really like it so much. Please
Please teach me . I want to learn how to make it . Can u help me
@y.takemura8488
4 жыл бұрын
It is important to make your own efforts with reference to the screen etc.
@rachit_25
4 жыл бұрын
@@y.takemura8488 what does PATAPATA means ?
@y.takemura8488
4 жыл бұрын
From the onomatopoeia of the wing flapping
@rachit_25
4 жыл бұрын
@@y.takemura8488 thanks .. and which material can I use for wings ..
@y.takemura8488
4 жыл бұрын
My situation The framework is a carbon rod and a plate. The coating is Power Lip T6016 (white)
Probably a Japanese guy
@y.takemura8488
5 жыл бұрын
Hi, I am Japanese.
Su Ba Ra si ㅡ
@y.takemura8488
4 жыл бұрын
Thank you