On the road ‘tuning’ with ACDodd - S3, Ep7 Cooper’s & Mapping…….
A couple of very nice Cooper’s, and original ‘S’ and a later RSP, then a 1275GT & ignition mapping……
Жүктеу.....
Пікірлер: 23
@Rlee5713 ай бұрын
Lovely Mk 3 and gorgeous Clubman!
@mk1leg3 ай бұрын
wow great job on the GT that was a stunning mini
@stevestone43462 ай бұрын
I didn’t realise you had your own channel. Subscribed.
@ACDodd
2 ай бұрын
Yes, and Thankyou!
@billywhizz983 ай бұрын
3 great video’s especially the clubman
@MrMkindy3 ай бұрын
With regards the Cooper S, I've found the twin paper filters in that airbox very restrictive. Slight non cutting mod and K+N filters works wonders for airflow.
@ACDodd
3 ай бұрын
You are correct they are terribly restrictive
@kathysarmcandy19923 ай бұрын
Cooper S first; If I understand the set up, and your needle change, it was rich at idle, even with the jet height(s) set correctly. Hence the needle change initially?
@ACDodd
3 ай бұрын
No, the fueling was to rich across the rev range at part throttle, even when set correctly at idle.
@nickhousden19963 ай бұрын
Another great video. Do you ever do any works to MPI engines?
@ACDodd
3 ай бұрын
No as they don’t have carbs on. However I still machine parts for the engines and gearboxes/clutches etc
@nickhousden1996
3 ай бұрын
@@ACDodd Do you have your own web shop? Or do you just sell through third parties
@ACDodd
3 ай бұрын
@@nickhousden1996hehehe far to busy for a webshop I have to turn work away already. Contact me through Facebook messenger.
@StefanMiniCooper3 ай бұрын
Again 3 good running Mini's 👍. AC what are YOUR thoughts to put 1.5 forged rockers in my Mini, it's a 1293 with Kent 266 cam and modified head. I read different stories on The Mini Forum.
@ACDodd
3 ай бұрын
1.5 rockers, not on a road car, the cam life expectancy is too short.
@StefanMiniCooper
3 ай бұрын
@@ACDodd thanks!
@deancook23773 ай бұрын
Am I correct in that with a CSI electronic unit and a 3.0 Ohm coil that the plug gaps should be 0.025"?
@ACDodd
3 ай бұрын
That is correct
@vijayananda9973
3 ай бұрын
@@ACDodd is that the same for a 123 distributor and 3 Ohm coil?
@MrMkindy
2 ай бұрын
@@vijayananda9973 My Alfa has a 123 and again 3 ohm coil specified, probably can run higher power but more risk of burning it out. Worth checking their website for details.
@ACDodd
2 ай бұрын
@@vijayananda9973 yes
@classic1989mini3 ай бұрын
Twin carbs? I thought you didn't do them unless supplied by you?
@ACDodd
3 ай бұрын
No, they have to be freshly rebuilt or new. It’s still a risk, that I come out and they are not tunable.
Пікірлер: 23
Lovely Mk 3 and gorgeous Clubman!
wow great job on the GT that was a stunning mini
I didn’t realise you had your own channel. Subscribed.
@ACDodd
2 ай бұрын
Yes, and Thankyou!
3 great video’s especially the clubman
With regards the Cooper S, I've found the twin paper filters in that airbox very restrictive. Slight non cutting mod and K+N filters works wonders for airflow.
@ACDodd
3 ай бұрын
You are correct they are terribly restrictive
Cooper S first; If I understand the set up, and your needle change, it was rich at idle, even with the jet height(s) set correctly. Hence the needle change initially?
@ACDodd
3 ай бұрын
No, the fueling was to rich across the rev range at part throttle, even when set correctly at idle.
Another great video. Do you ever do any works to MPI engines?
@ACDodd
3 ай бұрын
No as they don’t have carbs on. However I still machine parts for the engines and gearboxes/clutches etc
@nickhousden1996
3 ай бұрын
@@ACDodd Do you have your own web shop? Or do you just sell through third parties
@ACDodd
3 ай бұрын
@@nickhousden1996hehehe far to busy for a webshop I have to turn work away already. Contact me through Facebook messenger.
Again 3 good running Mini's 👍. AC what are YOUR thoughts to put 1.5 forged rockers in my Mini, it's a 1293 with Kent 266 cam and modified head. I read different stories on The Mini Forum.
@ACDodd
3 ай бұрын
1.5 rockers, not on a road car, the cam life expectancy is too short.
@StefanMiniCooper
3 ай бұрын
@@ACDodd thanks!
Am I correct in that with a CSI electronic unit and a 3.0 Ohm coil that the plug gaps should be 0.025"?
@ACDodd
3 ай бұрын
That is correct
@vijayananda9973
3 ай бұрын
@@ACDodd is that the same for a 123 distributor and 3 Ohm coil?
@MrMkindy
2 ай бұрын
@@vijayananda9973 My Alfa has a 123 and again 3 ohm coil specified, probably can run higher power but more risk of burning it out. Worth checking their website for details.
@ACDodd
2 ай бұрын
@@vijayananda9973 yes
Twin carbs? I thought you didn't do them unless supplied by you?
@ACDodd
3 ай бұрын
No, they have to be freshly rebuilt or new. It’s still a risk, that I come out and they are not tunable.