🏎 NRG Steering Wheel Installation Airbag Light Bypass and Horn Wiring On My Lexus IS300
Автокөліктер мен көлік құралдары
NRG Innovations RST-006-S Reinforced Steering Wheel amzn.to/2GXiZKb
NRG Innovations SRK-500B Hub Spacer amzn.to/2M0Btso
NRG SRK-121H Steering Wheel Short Hub Adapter amzn.to/2LVvgOe
Metal Film Resistors Assorted Kit Set 56 Values (1 ohm~ 10M ohm)amzn.to/2CW3SN9
-------Tools used--------
Butane Soldering Kit (PPSK) amzn.to/2CVcqUx
Milwaukee 2767-20 M18 Fuel High Torque 1/2-Inch Impact Wrench amzn.to/2L5Y325
Milwaukee Electric Tools 2557-20 M12 Fuel 3/8" RATCHETamzn.to/2ElUxQS
JEGS 80024 5-Piece Pry Baramzn.to/2Ec8IHn
Video Recorded With
4k Hd Camera amzn.to/2CQ9h9M
1080p Action Camera amzn.to/2pUYsuJ
Thanks For Watching and Please Subscribe kzread.info_c...
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
Twitter: / late_tech
#is300 #thelatemodeltech
Пікірлер: 174
First vid I've seen for explaining the horn back ring and contact requirement! Big 👍 thanks 😀
I needed to clear my SRS light on my car and just ordered some resistors today. You have the cleanest video about this issue I've seen. Thanks for making this video!
DUDE!!! This was THE MOST HELPFUL and PROFESSIONALLY orchestrated video and job I've seen on here on how do do this. Thank you. Thank you. Thank you. I'm gonna give the horn bracket thing a try also. You made it look SO possible. Keep up the good vids.
@Donnythelatemodeltech
5 жыл бұрын
Cool and thanks.
This video has saved me, been trying to figure out the best way to fit an aftermarket wheel to my 2003 jimny without clockspring, thanks.
Best video on steering wheel installation ever. I was thinking about making one because every Damn one on the internet they runthe wire strait threw...popping off the contact plate and shit... Except this one...finally someone making a vid with a bracket horn contact kit type install. Ill make mine for an mx5.
Thanks for the vid. I have been trying to figure out the horn situation on my FJC. Thanks to your vid I can now put back the horn. Driving with no horn sucks.
This video literally just made my life! Thank you so much for this !
Surprised you did this without disconnecting the battery! But am going to use this tutorial as a basis for my mustang. Thanks!
@RBoysMedia
3 жыл бұрын
I’m assuming it’s a sn95. Did you get it? I a little confused on mine. My hub has 1 wire
My brotha!! Thanks for this I literally thought this was going to be a mission.
This is exactly what I needed
Awesome vid dude, you made everything so clear and easy to follow. Definitely gonna be doing this to mine in the future. That cinematic edit was sick too!
@Donnythelatemodeltech
5 жыл бұрын
Thanks, I'm really happy you checked out the video, I thought I heard you say you installed coilovers on yours, ? , coilovers are going to be my next video. So I wanted to see what you got. 🤙
@Nickodelic
5 жыл бұрын
@@Donnythelatemodeltech I got the BC Racing BR series (non extreme low) with upgraded swift springs 16k front/14k rear. Upgraded the springs because I wanted something slightly stiffer since I do plan to do light autocross with my car in the future. With the damping on max soft the car feels nice to daily, I'd say slightly stiffer than stock. I cranked the damping to max hard and it was definitely a different ride, car feels tighter and stiff, kinda bouncy due to the crappy roads where I live. I'd say the BC's are a good bang for your buck, they are rebuildable too. What coilovers were you planning on getting?
@Donnythelatemodeltech
5 жыл бұрын
@@Nickodelic I ordered the Bc s Friday, without the spring upgrade, still no email on the shipping lol. Good to hear I made the correct choice.
@flinch622
2 жыл бұрын
Note he went with a deep dish wheel. There are 50mm and 75mm aftermarket spacers available to get ergonomics back to "driver" mode for any wheel - especially those that have shallow or zero dish. You might not care about a difference around town, but cross country is another story.
Thank you. Great instructions. Learned a lot.
@Donnythelatemodeltech
4 жыл бұрын
Thank you sir. If have time please check out my latest loads , they could use some support. Thanks again.
Mans a genius! 🙏🏽
For real big thanks man now I got a horn in my airbag light is gone thank you lots
I really liked this video! Thanks a bunch!
What did you do with the cruise control lever? I saw a few 3d printed brackets made but nothing that looked good yet
Watching this video backwards put the oem one back in lol. Love the look of the GR steering wheels but kinda want an airbag on my daily.
The Professor is at it again. Good shit
@Donnythelatemodeltech
5 жыл бұрын
Just lost 2 subs.
@BoBuilds
5 жыл бұрын
@@Donnythelatemodeltech Their loss. You'll make up for it.
The 3 wires for my 04 mustang nrg the green one as u said I should discard. The black wire and red wire where do I connect them?
Thank you for this video!
Great video and top notch work
Does it work for any airbag system? Like Im going to do it on my 2014 mustang and want to know if It should be the safe 2 ohm resistor ?
Good stuff. My steering wheel is nothing pretty. Thanks bro!
Question? can I do the same for a 1998 rav4 as far as the resistor part pr the airbag?
Bro excellent video… I can’t wait to do this to my is250
I put one on my civic eg and my horn button won’t fit in so I’m guessing I’ll have to buy a spacer or a quick disconnect since both should eliminate the problem
Did you cut the resistor to make it shorter ?
My airbag light was off at first then came on shortly after on the first drive. I opened it up and everything is still intact and in place. What would cause this? Do I need a higher ohm resistor?
Great vid, about to change out steering wheels on my rig. Does the factory trim leave an exposed spot on the bottom right hand side, looks like it in the video.
@Donnythelatemodeltech
4 жыл бұрын
Yes, it's very small, you can't actually see any thing through the exposed spot.
Does it have to be 2ohms
Followed instructions and now when I make turns my traction control light will come on. Do you know what this means?? I've read that maybe the steering angle sensor needs to be recalibrated.. please help thanks!
Really thanks this is helpful
please what is the exact distanca from the plastic to the steering wheel mount? Actually it is the height of adapter + spacer.
Watched to put the stock wheel back on, need my cruise control (and horn)
Will this work the same for the seat airbag?
hey what’s the bracket made out of as i can’t get it to work
How many wat 2 ohm resistor u use ???
I have a 2003 Toyota Camry And it have 2 plugs of 2 wires each Do I use the same 2 oms resistors on both plugs
Do most airbags have the sameresistance value?
Bro!! You’re a life saver!! I have a GS300 with a Nardi wheel with no horn!! This video is just what I was looking for 🙌🏻
@Donnythelatemodeltech
2 жыл бұрын
Cool
Okay it might be a dumb question but what exactly is the brass pice he has under the shorthub called
I put one on my 2006 gs430 - will it fit in a 2001 Gs?
I've seen what appears to be 2 different thicknesses from NRG (both non quick release) but can't find any specs. Do you know if the thicker one alleviates the need for the spacer? Tough to find much product info. Thanks for your time.
@Donnythelatemodeltech
4 жыл бұрын
I have no idea.
Nice, thanks for the information.👍
@Donnythelatemodeltech
3 жыл бұрын
No problem 👍
Is this fit on frs ?
Lots of great info! Take my money 💴 show me how to edit!!!
Really nice video.................How does a person find out what size resistor.....I have a 2006 Suzuki Forenza that I need to do the airbag bypass.....hope you can help !!!
Love that torque spec tho😂
Would I still need the spacer if I don’t plan on connecting the horn cables? however I would still like the horn cover to be there.
@Donnythelatemodeltech
3 жыл бұрын
It hits the horn button not allowing it to seat onto the wheel
Great video man thanks, Hey also did you buy a steeringwheel hub adapter or was the steering wheel exactly the bolts for your car,?see the steeringwheel I want to get is a 3 bolt but my 2002 MITSUBISHI MONTERO SPORT probably has a 6 bolt, at this point I really don't know yet
@Donnythelatemodeltech
4 жыл бұрын
Thanks, but, I really don't understand your question.
@CharacterWind
4 жыл бұрын
Question as far as the 2.0 ohm resistor you mentioned, is there a specific wattage you choose?
@CharacterWind
4 жыл бұрын
TheLateModelTech QUESTION as far the 2 ohm resistor you had mentioned. Is there a certain wattage to look for?
Maybe a stupid question but, can't u just still use the clockspring or does that not work with an aftermarket steeringwheel? Great video btw!!
You not keep the eshift?
Damn hope this works in my 1998 gs300
Hmm anyone know where or how to get a bracket to get the horn to work?
Does the airbag bypass work for bmw also or really any car?
that resistor is 2 ohm?
I bought the same pack of resistors as you and I don't have the 2R2 resistors in your video. I have the 2F2, 2M, and 2K2 resistors. Which one is the right 2 ohm resistor?
@ericg1149
2 жыл бұрын
Red red gold gold
Great video ! Is there also a way to retrofit paddle shifters with an aftermarket wheel too? I can’t find information on that specific for the IS300.
@Donnythelatemodeltech
4 жыл бұрын
You can totally do it, your just going to have to get crafty.
@Donnythelatemodeltech
4 жыл бұрын
🤙
@ULATAN.
4 жыл бұрын
@@Donnythelatemodeltech Cheee! thanks bruh 🤙🤙
Hi sir. My horn only has 1 wire on it. I don’t understand. I don’t know what to di now.
HKB bosskit for IS300 will allow the oem plugs to plug in. Then just use a retaining ring make sure Nardi horn button. Buy the parts brand new only, from HKB etc, so you don't miss any accessories.
@louiszindawa6950
2 жыл бұрын
Mine just came today lmao these guys had to suffer back then😂
So I like to manually shift mine when going down mountain passes etc. Is there a way to maintain that function? Or are you screwed if you go aftermarket steering wheel?
@Donnythelatemodeltech
5 жыл бұрын
Not screwed. I sure you Could move the clock spring under the dash and take the buttons out of the wheel and put them some where else. You probably needed to extend some wiring.
@cruisecurtis3247
5 жыл бұрын
@@Donnythelatemodeltech ill just manual swap it i guess. probably less effort than extending some wires :P
I'm just gonna cut this shit! 😂🤣 Love the video, been trying to figure this out for awhile, never thought about the bracket idea, thanks for the info!
I believe the IS300 specs also work for early Tacomas? [95-97]. Thank you for posting. As I understand airbag evolution, The designs begun in the 80's were over the top: a little too much volume and rate of inflation was really fast to compensate-airbag injuries did occur. 90's improved somewhat, but inflation rate still a little too much. Near '98, supplementary bags [side curtain] were in the works but not widely available - further reductions of inflation rate began. As I see it, any pre-98 vehicle is a good candidate for an aftermarket wheel, the number one reason being... get your driver ergonomics back! Horizontal distance from pedals to steering wheel in airbag cars is too short: they did it not to accomodate 4' 1" drivers, but to make leg position uncomfortable enough that you would put the seat rearward, which added room between driver and bag. The cockpit geometry itself is proof that manufactureres knew airbags were causing injuries, and extra space would reduce liabilities. OEM's aren't bad guys for doing this, but rather their engineers had to find a workaround to imbeciles in congress trying to design cars. Remember... prior to airbags cushioning stats, CAFE standards initially caused about 5,000 extra motorist deaths each year. Your dealer called this removal of steel mass a "crumple zone" - some worked, some were just underbuilt cars.
@Donnythelatemodeltech
2 жыл бұрын
😁 thanks for sharing
does it have to be 2 ohms exactly? or can I use a stronger resistor ?
@Donnythelatemodeltech
3 жыл бұрын
I would recommend the exact resistor
I just realized there’s no quick release on this set up. Great explanation tho!
You know how to do the seat air bag bypass? I have different seats in my IS300. I’d appreciate any help.
@PunjabiSylhety
3 жыл бұрын
Do the same thing to the seat airbag connectors with the resistors.
Do you find it hard to reach the indicators?
@Donnythelatemodeltech
4 жыл бұрын
Not at all
Does the resister on the airbag work for all cars and trucks?
@Donnythelatemodeltech
Жыл бұрын
Probably not
So do I use a negative black wire to extend it?
@whiteboynuts6973
Жыл бұрын
??❤
So I tried doing the 2 ohm resistor on my 1998 GS 300 And the airbag light is still on does it make a difference if I leave the clock spring in and I do it on the other side where it plugs into the back of the bag? I’m putting a newer style steering wheel on it and I want to leave the clock spring so I can run cruise control and horn and possibly wire up volume controls
@Donnythelatemodeltech
2 жыл бұрын
Not really sure,
@thecookeman
Жыл бұрын
You may need another type of clock spring to get the additional wires through to have steering wheel control. Fortunately alot of Toyota clock springs are cheap and have the same plugs.
mine didnt come with that brass plate for some reason....what can i do?
Did this and my horn won’t stop honking since it’s always touching metal on the short hub. Even if it worked with the steering wheel horn interrupting the circuit when you take it off the quick release it will still be honking because the horn wire is touching metal. Any suggestions?
@Donnythelatemodeltech
Жыл бұрын
I used a spacer
Is the 2 ohm universal? Because i bought a 3k ohm for my protege and it tried to fo the same thing and it didnt go off
@Donnythelatemodeltech
2 жыл бұрын
Why the 3k?
I wish you would’ve showed how to cut and form the piece you used
do the wires that you soldered on the back of the horn come with the steering wheel?
@Donnythelatemodeltech
4 жыл бұрын
Yes
@Donnythelatemodeltech
4 жыл бұрын
Check this out if your thinking about getting a nrg wheel, kzread.info/dash/bejne/h6OMrcN_d6iycs4.html
@Diego-dv2rg
4 жыл бұрын
@@Donnythelatemodeltech thanks brother
Hi, i have a question do you think i can fix my airbag light with the same method? I have and 2001 VW GOLF MK4
@Donnythelatemodeltech
5 жыл бұрын
The resistance might be different, I can try to find out for you. Direct message me on Instagram.
@chrisochoa2660
5 жыл бұрын
TheLateModelTech sure i will!
@katlyngardner8184
4 жыл бұрын
I have a 2015 Scion tC is the resistance the same? I saw you have 1 ohm listed but spoke 2 ohm just want to make sure!
I bought the same resistor pack from amazon, i put one in the airbag socket, but my airbag light still does not turn off!.?
@Donnythelatemodeltech
5 жыл бұрын
Get a meter and check the ohms , more than likely you have the wrong resistor.
Would this be same for first generation Xb
@Donnythelatemodeltech
Жыл бұрын
No idea
Do the hubs come wit the screws
@Donnythelatemodeltech
6 ай бұрын
Usually it’s the steering wheel that has the screws
Good tasting music
@Donnythelatemodeltech
2 жыл бұрын
kzread.info/dash/bejne/lYKDq6ugqcWTc8o.html
I looked everywhere for a video that explained all steps and finally found it. The only bad thing is I've never done anything to my car on my own and I haven't found no one willing to connect horn for me.
@OSOKCyber
3 ай бұрын
grow a pair and do it yourself
Is it 2 ohms for all cars or just your specific car?
@Donnythelatemodeltech
2 жыл бұрын
🤷🏻♂️
My gs300 is beeping when I turn ? You know why?
I bought the same resistors. The light dose not come Off!. Help
@Donnythelatemodeltech
5 жыл бұрын
Direct message me on Instagram, and I can try to help you out.👍
do i need to remove the battery cables to remove the airbag?
@Donnythelatemodeltech
4 жыл бұрын
Probably the safest way.
Hey man, does self canceling still work
@Donnythelatemodeltech
2 жыл бұрын
Yes
Is this the srk-120h hub ??
@AlexRamirez-wr7nb
4 жыл бұрын
I believe it’s srk-121h
What holes do i plug resistor in? I have 4
@thatelectritian
4 жыл бұрын
I would also like to know this because I'm confused
@LITLEGEND
4 жыл бұрын
Me too I wanna know that part bad
@thatelectritian
4 жыл бұрын
I got it posted on my Instagram I ended up figuring it out (07_offrolla.yyc)
@vikingselph5475
4 жыл бұрын
I ended up getting the resistors nrg sends with the quick release.. airbag light popped up 2 days later. Fuses and all are still good. Dont know wtf
I hope im not too late but can i skip the beginning all together and just run my car with no horn?
@Donnythelatemodeltech
2 жыл бұрын
Your car dude
do you absolutely need the spacer ?
@Donnythelatemodeltech
Жыл бұрын
No
I really hope I cut the right wire bc he wasn’t specifi on what color to cut. 3:14
the hub that u have the link does not work
Why does my horn not stop honking now lol please help
the "airbag" is actually a clockspring i know this is from 5years ago but still
I see what you did with the horn yet I dont understand how doing that makes it work. Because if that bracket is all the time touching that hub then why isnt the horn always going off?? It makes no sense to me.
@Donnythelatemodeltech
4 жыл бұрын
The switch,,,,, "button" completes the circuit.
@jessierivera1003
3 жыл бұрын
@@Donnythelatemodeltech when mine is set every time the wire touched the metal it’ll honk the horn constantly
My hub came with 3 wires .. a red and green and a black ... for a mustang 04
@Donnythelatemodeltech
5 жыл бұрын
Disregard the colors, extra third wire is for an accessory.
@user-ue5xb4th5i
5 жыл бұрын
What do u mean accessory please explain more
@Donnythelatemodeltech
5 жыл бұрын
@@user-ue5xb4th5i it's for a steering wheel that has an extra button, like for nitrous.
@user-ue5xb4th5i
5 жыл бұрын
So what about the other two wires
@user-ue5xb4th5i
5 жыл бұрын
?
10:45 what do you mean my GMT or GNT
@Donnythelatemodeltech
4 жыл бұрын
Torque to 36 lb ft. 'Good n Tight'
@red.2jz
4 жыл бұрын
@@Donnythelatemodeltech thanks, appreciate it👍
Now do it on an ls400
Man everything worked besides the airbag light is still on
the. vid