Good thing he adds a whole 5 minutes to show us how to open and close tool boxes. God where would we be without him

Glad you addressed the light on the switch, almost didn’t get this for my zero turn because I was afraid of battery drain. Good video sir.

Just wanted to thank you. I followed ur unstructions and it all worked out! If I can do it just about anyone can!!

The switch is wired backwards, just change the power wires around on the switch and the red light will only be on when the switch is in the on position

@qb1099

Жыл бұрын

I need to try this. My first install attempt ran my battery down overnight without the light bar even being hooked up yet. My switch has a little blue light.

I always drop a like on 3D machines videos before I watch them because I know I won't regret it

I have a light bar on my bicycle, lights up the trails real nice.

3D I love your garage setup and how everything is organized

I run nilight pods on my brute force 750 and for the price they've outdone my expectations. $25 and never failed

Nice music, clear instructions. I'm down for one. Great job !!!

Light bars are mint

i got a 20 inch flood an spot beam along with three 4 inchers on my suzuki eiger 400 it turns night into day i love them

He is literally so smart with everything! Love ur videos man and keep up the good work!

@NilightLed

7 жыл бұрын

I think so!

Doltan your a legend and a inspiration so keep making amazing content your a absolute legend

Hey just a tip cross the chains on your trailer so the chains catch it :).

@peytonmccosco5712

3 жыл бұрын

Yup

I have the same light bar. Bright asf. I love it.

@NilightLed

7 жыл бұрын

glad to hear this!

I wish you lived closer, I need one of these installed on my Jeep

If you wire a relay up to the stator, to have a switching ground, you could have the switch light run only when the engine is running. You could probably use the smallest relay you find also since thats a small led light, so it would be a cheap upgrade.

3D best on KZread keep up the excellent work dalton cant wait for the next video

Hittin' the like bar for the light bar. Nice job.

Love the set up

Dalton I've been watching for a while and I've gotta say I always love your videos always quality content

this looks so good

Hey 3D been watchin for a while. Quality vids. Keep it up man. Best vlogger out there. 👍🏻👍🏻

for my light bar on one of my quads i put a splitter in the ground and then a switch so you can switch the light on the switch on/off and also a high and low beam on the existing head lights on the quad so when it use to be on low/high beam high beam at the moment is low beam and the light bar comes on when it on high and another switch to turn high/low off! its complicated but pretty easy to use ;)

Your videos always make my day and make me smile thankyou

Thanks 3D machines i bought my self one

Dalton, that trailer is badass!

You are the best 3D machines

That should help you look for jilted Prom dates in the dark!

I have the exact same light bar. I bought it about 2 years ago

I just ordered my light bar

I have some of there light cubes there good for the price but the mount tend to break to vibrations but they have good customer service and you can gets new mounts free

Awesome Job buddy. Thank You

I, too, have a new 4 wheeler and would welcome a new light bar ! 🤞🏼🤞🏼.. it’s a 2021 Kodiak 700EPS 😬

That is one bright bar.

I have to admit I went on ebay and found the exact same light bar by coping the name and this is actually a pretty good light bar

3d you are my favorite youtuber keep going and good luck!!!!!!!

I realized today i love your videos so much because they incorporate the same style that Casey Neistat uses. Love the videos keep up the amazing work.

thanis 3dmachines im ganna go buy one of the light bars for my 4 wheeler and keep up the good vids

@NilightLed

7 жыл бұрын

I believe he will show the Nilight's links in the description section.

Your awesome keep It up. I watch your videos everyday. I'm from the uk.

I just added a 6in light bar to my Dirt bike, Yours looks good

@NilightLed

7 жыл бұрын

thanks.

I like your light bar

wow really nice video! nice garage to with everything you need to do anything haha

Nice vid keep up the fantastic work.

Very smart trailer

You know he's professional when he owns a centre punch

U should make blogs they would be great 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏻👍🏻

Hey here's a sugestion if you want to light up the underside of your atv buy the LED GLOW brand. I use it on my atv. It changes colors and has a wireless remote to control the settings.

I miss my Kodiak!!! I had an 04 Kodiak 450 which was just about identical to this except the old Kodiak didn't have independent rear suspension. I think that's why they replaced that model with this. This has got to be an 06 or later.

I was dripping determination in one of my classes that I use my hands in that class with machines.

@billybull7419

3 жыл бұрын

Wat

bro thanks so much i am trying to see how to in stall this light bar and you just helped so muck bro thanks agin.

Great video

Like the video. Wondering what gauge wire would be an improvement over these wiring harnesses commonly offered.

love your videos been watching scence the beginging

This video would have been rely helpful when I was installing my 20 inch nilight bar haha

Great Video!

Braydon price has a light bar too its sick

Those lights are Jizzzzzzzzzzzunk!

Yeahhhhh been waiting all day 😎

Btw that ending music is the best

Nice trailer

Same light bar on my trx450r

I love nilight. good quality good price. have one on my atv, I have the 7 inch

@blackbird1234100

7 жыл бұрын

and I had bought my dad the 12 inch combo beam for his yamaha wolverine r spec

@NilightLed

7 жыл бұрын

thanks for support friend.

3D I am probably going to get a mini light bar and I will most likely put it never the grill on my ATV

Love your vids

im happy to see you actually showing you working on stuff i love learning new things

dude love thst truck

Wow another interesting video😛😛

I like how you took the gas cap off even though you didn't need to

nice lights

@NilightLed

7 жыл бұрын

thank you

Get some unibits. They drill nice holes in plastic. If you used a relay, the light will only illuminate when you power the light on.

Love your vids keep it up 👌

Literally just installed this today😂😂

Hi you are the best KZread love your vids . P.S are you coming to England

Find a ground wire that is connected to the ignition and use that switchable ground. That's what I do with my ATK Enduro.

check the wiring on the switch. it might be wired wrong. it should be to where when the light bar is on then the switch is on. the middle should be load then one of the outsides will be negative and the other positive. might be worth double checking

just bougt it cant wait

I understand that it needs to be connected to a grounding spot in order for the light switch to be on, but do you need to leave it disconnected at all times if you do not want it draining power unless the switch is flipped

you should do more trail rides

cool a new ending pic :)

Wow, they are SO bright! Oh, wait, you didnt even bother to show it.

i love ur channel

3d you can wire it so that the light only comes on when you turn the switch on :)

3D machines Brandon price just finished his fourwheeler and he put I believe the same light bar on his grizzly

Terrific video. What size hole did you drill to mount the light switch?

You can run that unhooked wire to the output side of your key switch so it only gets power when you turn the key on. 😁

their are so cheap and awesome!!

Love the videos, keep em coming. Anyone know what bit size/hole size for the switch?

machine freaks where are yall??

@urmommaahugehoe

7 жыл бұрын

idk

@astroplays_yt1144

7 жыл бұрын

on my computer drunk

What size bits did you use to drill the mounting bar holes and the on/off switch hole?

When are you next working on the drift car? An love you're videos keep it up

i love the vids!!! could you please please straighten the rack on the left side of your led bar if you're facing the quad lol its bothering me xD

I was waiting for the relay connection part

My son got one of these for his mini ATV for Christmas..only problem is I have no clue how to do electrical stuff ...guess I gotta learn

hey hey nice video man

Where is the light bar for your truck? Awesome videos keep it up!👌

I wired mine to the hi-beam circuit so I can switch them on or off as needed. These require way less current than the incandescent so I'm actually saving power when I use them BUT I can still turn them off and just use the original incandescent as needed since the LED bars are no legal on the roads and there are a few places where I can take my atv on the road.

@amitor1234

4 жыл бұрын

How did you connect it? I have red and black on led bar and yellow, blue and black on my quad beam.

@jwyt91

Жыл бұрын

@@amitor1234 trial and error. Mine hooked up to the white wire for high beam. But it's way easier than doing everything he did. Not saying he was wrong. Just way easier. 2021 400 king quad

Just caught the exact same light bar

if you run a jumper so the power only runs the l.e.d on the switch when you turn it on it will be off in the off position ;)

Just ordered a 20" and 12". Thanks!

@NilightLed

7 жыл бұрын

thanks