There are lots of detailing channels but nobody knows pressure washers and guns like obsessed garage.

@ObsessedGarage

4 жыл бұрын

Ha, ha... There is no contest there.

My dad always told me, “There are people who watch things happen, people who make things happen, and people who ask what happened?” Matt, you are killing it and absolutely making things happen. Thanks for everything

@GaryGill786

3 жыл бұрын

Your dad must be very intelligent 👍🏻

@interceptor7905

2 жыл бұрын

Spot on

Well of course this video drops on the same day as my Mosmatic delivery. . . .

This probably isn't something I would spend the extra money on but it makes me happy that you made it exist. I hope it's a big hit in the store.

You are not nuts. I replayed the sound of that fitting several times. It is perfection. I want one even though I have a POS $130 Sunjoe 😂

The new wand is definitely more aesthetically pleasing.

@TheFi1thyCasual

4 жыл бұрын

@Joe Karma it's a bit slimmer..very minor changes but I like it.

next up is fully stainless steel garden hose and spigots packages with quick disconnects

I don't have fancy cars like most of you do but my car is always brand spankin' clean thanks to this channel. Car washing is like my stress reliever/happy me time and it literally changed my life. Recently ordered the Kranzel 1156TST (220V standard voltage of my country) and the full OG Kranzel solution (Gun, Wand, Foamer etc). Crazy? I don't think so! To each his own. Thank you Matt and OG team for your passion and hope to see more contents in the future!

Your obsession is what makes OG so great. Pre-ordering that M22 14mm coupler now! Thanks for your hard work on this piece!

I have been waiting for this for a long...long time. Glad I finally got to place my pre-order. I already have a MTM foam cannon so figuring out what I need has been a challenge. Kyle has been great helping me with the order process. It is appreciated.

I've been waiting for this announcement! Just pre-ordered the full sprayer & wand and the hose coupler. I got the MTM swiveling gun last year, and while it's nice, this Mosmatic is on another level.

Matt thanks for your work bringing this Mosmatic gun/wand to us. I’m all in!

Still watching... the one thing I miss I had on my cheaper pressure washer.. the quick disconnect I could press the nozzle into and it would lock without having to pull back on the QD to allow entry. This came in extremely handy and I know a few OG followers have brought this up in the facebook group. This thing looks like a winner to me. It's not foreveryone but for those of us who just have to have the best... well.. this is it and nothing comes close.

nice addition.. i just got my gun and wand in last week and they are very nice and once you handle them you will know they are well built.. the trigger is nice and smooth..we thought you were nuts way before this video...

Great job on all the new fittings, gun, wand, and spray tips

Love this. I'd get the full new set. No question. Looks amazing.

I have been using the OG SPEC gun, OG SPEC wand and OG SPEC nozzle for a month now, it is amazing, very functional and user friendly. Thanks Matt for bringing an awesome to the market.

Awesome , just placed my pre order for the stainless steel Kranzle coupler to use with my Mosamatic gun and Kranzle TS 1122.

New wand and nozzles look AWESOME! Not sure if I'll replace my Mosmatic wand any time soon, but I DEFINITELY want the 3.0 40-deg. nozzle!

Just put in my order for this OE-Spec Gun/Wand combo, can't wait to try it out!

I just got off the OG store spent 150 bucks on 2 nozzles and 1 stainless fitting ,Damn life is good!!! 👍😁

Just bit the bullet and ordered the Mosmatic OG Spec High Pressure Sprayer w/ Quick Disconnects. Stoked.

Watching that new 304 stainless 14mm to m22 fitting in Action gave me a feeling that I haven't felt since my wedding night! Man that thing is saweet!!

@bobbymorgret

4 жыл бұрын

@@leora2790 😂

Im the crazy youre building these fittings for..... i must order those new tips and stainless outlet coupler for my current (now old) OG kranzle pressure washer setup! Awesome job Matt!

Glad to hear you know a quality AR...

I don’t need this, but i want it... so i’m gonna buy it ;) good work Matt.!!

Just got the MTM version due to budget but hey can't wait until I make some extra money and upgrade to this! Nice work!

Would love a trigger lock to keep it on - good timing as my mosmatic is in need of a refresh with all the scuffs and scratches over the years

The integrated nozzle/plug/rubber guard is genius. I'll be buying one for sure.

@FourT6and22

4 жыл бұрын

@Joe Karma I get UNDER the paint dude lol

You have a great story and great products. I found you from Pan the Organizer when looking for the ultimate tools for cleaning my new baby ('23 Cayenne GTS). I respect your pursuit of the ideal product that you want and your willingness to make it available to the public. I'll be ordering the Kranzler sprayer/wand/foam cannon upgrade kit this week. Can't wait!

@ObsessedGarage

Жыл бұрын

Thanks man!

It would be nice to just have a video where you show how to upgrade the old wand to the new style.

My Mosmatic is SOOO legit. I can only imagine what these fittings feel like if they are the same quality as my current gun. Way to keep bringing this level of product to market.

I am glad you started the whole pressure washing series, that is when I started really watching. You have taught me a lot. looks like it will be a big seller. Will you do a video on Kranzle maintenance? I am going to change the pump oil and put it away for winter pretty soon. Is there anything I should do far as maintenance?

@ObsessedGarage

4 жыл бұрын

Yes, I'll be at KranzleUSA on the 19th and 20th shooting DIY maintenance videos.

"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough " Henry Royce "Rolls-Royce"

I got the complete obsessed mosmatic gun setup! I love it! Cost me a arm and a leg :-).

This is great. I still think you should do stainless steel internals for the the super enthusiast . Just seems right, everything so far is stainless steel, to make the internals stainless steel as well. Maybe have that as a secondary option for the gun. Sure it will add cost but it at least could be an option! Either way nice job. Will pick this up as a gift for someone

You should offer a fitting package to upgrade your current gun & wand. Just a thought that most guys dont want to have to search sizes ect.

Bought the pricier options but did them in steps to ease the pain of the purchase. I'm 1 component away from having the Kranzle fully operational. Should be up and running by end of month.

It’s interesting watching your videos you go down the same rabbit holes I go down sometimes looking for perfection and ease of use aka a better way I just wish I could turn my crazy into money.

Love your open mind on video. I have the AR 390ss and I never thought about the quick disconnect. It’s brilliant. I went straight to your site to get them but they are out of stock. Is there anywhere else I can get it from. I would love the swivel with the quick disconnect

Wow, thats awesome.

I see what you're saying. I bought one of your 50$ garage sale pressure washers but still bought the MTM full kit lol

This is a random question but what has been the best interior cleaner that you have used? Like something that can take out heavy stains or at least make it near perfect without using an extractor/steamer.

Awesome!!!

Was thinking about adding a 25 and 40 degree mosmatic nozzle to my collection but was wondering if they work well with mtm couplers since that's what I'm running

Just ordered this gun. Live on the beach so if a 316 ever becomes an option for those fittings I’d buy them.

Impressive!

I have the karcher k5 premium, do you sell a different hoses and wand for it? The one I have now sucks

holy crap thats a lot of fittings haha, but the end result is perfect :), expensive, but qhen is quality cheap right?

Will you be going through the pressure washer kits you made up for us with other pressure washers so we have the correct nozzles with the kits? This video came out just in time. I was literally getting ready to buy the $400+ kit for my Greenworks 2000.

@ObsessedGarage

4 жыл бұрын

Yes, it's getting more and more complicated. We are going to work on an organization project and diagrams to simplify things this winter.

i have this kind of nozzle from one year ago but not with disconect part:)

You know on the old wand all you need to do is cut the rubber off and it looks almost similar to the new wand. Just get a rubber nozzle. Matt is great at marketing. I give him that.

@ObsessedGarage

11 ай бұрын

There is more to it than just the rubber cover on the end of the wand. The major difference is the use of higher quality quick disconnect fittings. MTM fittings on the original wand and Mosmatic T304 fittings on the OG Spec.

@baja1980s

11 ай бұрын

@@ObsessedGarage I was refer to the look, yes the fittings are upgraded but in the end similarity, look is almost the same.

Quick connects for 1700 karcher 14mm, yes. 1/2 3/4 or 3/8

Hi Matt , before you said it I said to myself I’m gonna get a 25 degree and a 40 degree nozzle , great minds think alike 😂

I wonder if these Swiss couplings will get rid of the "looseness" that I have with the basic MTM couplers that came the gun???

Thanks again for the useful info. Ordering from OG (US) to Europe is a pain but thanks to your info I have found the EU versions of the Mosmatic gun and couplers to finally power my Kranzle.... Do you always us the Kranzle at full pressure (130 bar ) when cleaning cars ?

Small changes but important changes eh? You dont know notice it at first glance but it makes a lot of difference, for the better.

Looking legit

I guess I am stupid, I have cobra hose and cox reel and mosmatic gun ,except the kranzle pressure washer

How to change the Nozzle ? I bought “OG Spec Mosmatic Nozzle Assembly “ with a 4035, now I bought a 4040 Mostmatic Stainless steel Nozzle, How can I use this one to replace the 4035?

I recall seeing an gun/ wand holder/holster in your garage. Where can I find one??

@ObsessedGarage

4 жыл бұрын

www.obsessedgarage.com/collections/kranzle-custom-install-solution/products/mosmatic-wall-mounted-wand-holder

Pricey but still appreciate high end options mabe if you made those disconnects in America it would be a little cheaper

would the MOSMATIC T304 STAINLESS M22 TO 3/8" MALE COUPLER FIT MY SUNJOE?

Will this new Mosmatic gun fit on my 1/4" uberflex M22 14mm hose?

Hi Matt, are this OG spec fittings include with CUSTOM INSTALL KRANZLE PRESSURE WASHING SOLUTION or this are upgrade option? Thanks!

@ObsessedGarage

4 жыл бұрын

We can spec it custom, but they are not part of it yet. kyle@obsessedgarage.com could dial it in.

Awesome

Brilliant !! 👌🏼 Love the quality - where do I sign... shipping to the Uk ?

@ObsessedGarage

4 жыл бұрын

Yep, shipping anywhere in the world!

@peterben5987

3 жыл бұрын

@@ObsessedGarage Tried to order some of these yesterday, total came to $166 ish and says 'we don't offer shipping to England', so obviously not!

Matt "Daniel Defense AR15" Moreman. 🤣👍🏻

NASA should hire Matt to design Space Station couplers.

Another buckets video! lol.. i'll end up ordering these. i'd rather buy once

How do I know what orifice to select on the pre-order? I have a Ryobi 3200psi gas pressure washer.

@brandongill7636

4 жыл бұрын

4 months later I have the same question. I looked up the Ryobi model I have but was unable to locate any reference to the recommended orifice size. Matt said a 4.0 on his Kranzle so for a Ryobi I think ill take a stab at 3.0 aiming for 1000psi fingers crossed..

Does Mosmatic make an adjustable nozzle? I use adjustable nozzles for softwash rinsing

@ObsessedGarage

2 жыл бұрын

They don't.

Matt I know you more than do your due diligence but if Suttner is the origination point for the Mosmatic gun, was it not possible to use the internal from the Suttner 2700 and have your shorter swivel built in to that? The cost of the two guns is pretty comparable in their original form from what I've seen. Just curious as that would have given the full stainless setup. Either way, it's awesome that you have created the new OG spec package!

@ObsessedGarage

4 жыл бұрын

It wasn't as this inlet stem is different on the version made for Mosmatic.

@chrisviducich2062

4 жыл бұрын

@@ObsessedGarage understood.

Finally! My M3 is so dirty!!! And did you say you have a Daniel defense!

@ObsessedGarage

4 жыл бұрын

Yes, I have a pretty legit DD with an ACOG. I just don't know how to use it. Ha, ha...

@bertraminc9412

4 жыл бұрын

Obsessed Garage Sweet! I have two and a KAC in BATFE jail. Getting ahead of the liberals and their gun laws. I preordered two QD connections like you suggested. Please check your email. I’m not sure I got the right one for my new Kranzle setup that’s going to be preorder soon.

Is there a way to get that gun full stainless inside and parallel thread?

@ObsessedGarage

4 жыл бұрын

There is not. Maybe some day in the future.

On the new gun, is it too late to make changes? C/T outlet end, I understand the point that in a pinch getting a non-NPT coupler may be difficult, but most people buying a better gun still have an old one laying around and in that pinch I'm not likely to try and change it I'll just grab by old handle and finish the job. I'd like to see the best available, but also noting straight threads coupler on the end of the wand, I rather have the same on the end of the gun and buy just one replacement fitting to keep in the toolbox for the what if.

@ObsessedGarage

4 жыл бұрын

The main advantage to NPT is serviceability. Using strait threads requires more sealer and makes it harder to remove for the user. I had to make a tough choice.

@robert5c

4 жыл бұрын

@@ObsessedGarage thanks for the reply, I got that from the video but after seeing the wand uses straight threads coupler, I figured it may make sense to have both ends the same so someone can justify purchasing a backup now knowing they only need to store one extra coupler for multiple possibilities. Plus the benefit of getting that gap out. In any case, is mosmatic not able to get the brass zinc plated for cheap enough just to fix the aesthetics a bit?

I'm a hard working man and believe in paying for good quality with my hard earned money. Once I decide on something it's usually after hours and hours if not months of exhausted research. After watching this video I will save up a little dough and buy this gun. You obviously believe in your products and it shows. Expect an order from me soon sir. Best product review site on KZread. And all done without one single cuss word. Take notice fellow You Tubers.

I have the same pressure washer. Can’t I just say send me the new gun with all the new fittings. I don’t want to do any guess work. Btw I’m already OCD about everything and it drives my family crazy. You aren’t helping with your videos. But something about your stuff soothes my soul. Lol

I ordered one.

I apologize for asking so much questions, how do I know if the pressure washer that I will be getting is considered low flow? The one I’m looking to get is 2150psi with 1.85gpm

@ObsessedGarage

4 жыл бұрын

If it's under $500, it will be low flow.

@markevanado9463

4 жыл бұрын

Obsessed Garage so the blueclean ar-630 tss will work properly?

great setup Matt. I am pre ordering this set. also looking to buy a pressure washer for my mobile setup. what do you recommend ?

@ObsessedGarage

4 жыл бұрын

If you have 20A, I would do the Kranzle K1322TS. If not, the Kranzle K1622 is perfect for mobile as it draws a lot less current.

@KelvyGoveo

4 жыл бұрын

@@ObsessedGarage okay cool. Im searching for compact generators in the Honda Companion I believe is 15A would that be enough ?

@ObsessedGarage

4 жыл бұрын

You can do the K1322 with a 1.5 orifice in the foam cannon.

Quick connect lance?.. must not use hot water i take it

I would like your og version of the mosmatic gun. I live in Europe therefore I will have to pay customs You are the only one to feature this gun How am I going to buy it without costing 600€≈650$ Could you suggest mosmatic sell them to Europe dealers too And I am not in favour of the mtm alternative

Matt, I think the QC is not even milspec This is some SpaceX spec or something.. That click tho. 👍

"Everyone thinks you're nuts"- no pun intended

Are there connectors available to attach this gun to a Nilfisk (click and clean) hose?

@ethompson5061

4 жыл бұрын

I'd also like to know this, seem to be nothing available for the nilfisk.

@ObsessedGarage

4 жыл бұрын

No, I don't have those.

Buckets, too.

Im in Finland and we use bsp threads instead of npt. I wonder what happens if i torq npt male plug into female bsp in foam cannon? Best bet is to buy those 1/4 males plugs from europe?

@jtm1979

4 жыл бұрын

Google told me this: In most situations that don't involve high pressure, a male NPT fitting can be threaded into a female BSPP fitting, using Teflon tape to seal. Note that because the male NPT fitting is tapered it will thread a little farther into the straight threaded BSPP female fitting. So i guess i am ok?

@ObsessedGarage

4 жыл бұрын

Yep, should be fine.

I didn't know how much i hate using cheap plastic nozzle until i have a new sexy rubber unit 😂

Absolutely fantastic, this is just pure quality, without matt and og, this piece of equipment would not exist, well it would but not as legit as this, definitely going to get one in the near future.

@jasonmennie9629

4 жыл бұрын

@Joe Karma i could have worded it better, yes obviously i know this sort of equipment has been out for many years, but what i was trying to put accross was, if matt had not put the time and effort/drive to have his idea turned into a reality a top level quality assembly like this, probably wouldn't have been made to a spec like this, their are alot of copys of this but can't match it on pure quality.

Is there anyway to order a custom gun, at any cost, with full stainless and the fitting that has no gaps?

@kenneyyyy

4 жыл бұрын

Mail them with your pressurewasher unit and your ideal custom set, they will come with a decent setup ;)

@pixelhabits

4 жыл бұрын

PlaygroundSF. com I have his current setup and the brass fitting is leaking a rust stain onto the Teflon tape between the quick disconnect and the outlet of the gun. Also something about knowing a better option out there bothers me.

@ObsessedGarage

4 жыл бұрын

For a few thousand, I'm sure it could be done.

Do pressure washers generally have the same hose size? I’m just curious because I don’t want to order a mosmatic and Find out that it doesn’t fit to the pressure washer

@ObsessedGarage

4 жыл бұрын

No, there are quite a few options.

@markevanado9463

4 жыл бұрын

Obsessed Garage I hope that the pressure washer I order off of amazon will be compatible

@markevanado9463

4 жыл бұрын

When I order them both and find out that they don’t connect with each other, can I order a customized connector from you?

What you can recomend me for my greework 1800 psi. 1.1 GPM for car wash the nozzle degree and the orifice ? Im planing to buy

@ObsessedGarage

2 жыл бұрын

Here you go: www.obsessedgarage.com/collections/greenworks-accessories

@TheMelqui7

2 жыл бұрын

What the orifice number works better for my ?

@TheMelqui7

2 жыл бұрын

I like tu buy the mosmatic og version the complete package sprayer and wand solution

I dont mind ordering your items, but couldnt you do some deals, so we in Europe could buy your stuf within Europe or from Mosmatic

@peterben5987

3 жыл бұрын

Yep, would be helpful, seeing as how you can't now seemingly import them!

@JaazznMaannn

3 жыл бұрын

@@peterben5987 Cant you import them from the US?? I got mine when it came out ;)

@peterben5987

3 жыл бұрын

@@JaazznMaannn see my reply/comment to Max Burg above. Had a message from Jeff at OG to say that a new UK law means you have to order a min. of £135?? I'm not sure what this is about!!

I live in Switzerland, just sold my Kärcher K-Series, got a Kränzle and was looking for the perfect Gun/Wand setup. I'm frustrated, that Mosmatic is not able to build a proper webshop and sell these Products directly to their "potential" customers. The local distributors add margins that are so high, that I will have to Order a Swiss Product from Obsessed Garage :-P Great choice of components Matt, now the setup is perfect in my opinion!

Would the M22 3/4 coupler fit the MTMSGS?

@ObsessedGarage

4 жыл бұрын

No, it won't.

@richardlizares3427

4 жыл бұрын

Obsessed Garage Sorry I meant would the new 3/8 mosmatic coupler fit the MTM SGS

Hey Matt, is the adapter at 28:03 on your store? I'm interested in pre-ordering the full setup for my AR118 (going to use it until it dies) and it looks like I can't find that adapter. Just to confirm, the only other adapters necessary for an AR Blue Clean setup would be the "ADAPTER FOR AR BLUE/SUNJOE/OTHER M22 15MM" and the "MOSMATIC T304 STAINLESS M22 MALE TO 3/8" COUPLER," correct? Thanks for investing your time to create this solution for the rest of us! I look forward to placing my pre-order after using my original setup for over a decade! :D

Even though i hate spending 50$ for the new 4.0 nozzle i couldn't stop my self from buying one it was way too sexy

What happens when the stainless plug wears out and causes a leak between the plug and coupler? Replace the whole gun?

@ObsessedGarage

4 жыл бұрын

It is almost impossible for that to happen with the precise machining of the Mosmatic fitting. Phil’s failed plug is very uncommon.

@seth3342

4 жыл бұрын

Obsessed Garage thanks for the reply. I agree that it is uncommon, though I’m trying to justify the added experience of the smaller connection foot print with the lack of replacement parts if the need were to happen. I really like the product but I guess there wasn’t a way to thread the plug up into the handle? Allowing for a male threaded plug and just move the swivel higher in the handle. Looks like it may have been made like that, and it seems that would cut down on new tooling. ?

@ObsessedGarage

4 жыл бұрын

I had it integrated, so that you have one less failure point. This fitting locks down under pressure, so there will be very little wear and tear on the machined plug. Remember that the fittings after the outlet of the gun move around more. The fittings before the gun stay under constant pressure and don't swivel. The gun could be taken apart and a new swivel could be replaced, but that part is like $90. It would make more sense to buy a new gun 5 years from now if it failed, which I just couldn't imagine happening very often under normal conditions. I have sold tens of thousands of plugs, and have literally seen one of two fail.

@seth3342

4 жыл бұрын

Obsessed Garage thank you for the information. I really appreciate the time you put into your brand and channel. Looks like I’m in the market for a new gun 👍🏻

6:18 - Any issues with flow reduction because of the smaller inside diameter of the inlet to the gun? (I'm only this far into the video. Apologies if you answer this question later.)

@tristanwwsd

4 жыл бұрын

Wonder the same. Don't think he covered it in video.