In2Detailing have recently provided a 10% discount code for viewers which works on most brands across the website. This is an affiliated discount code meaning I will receive a commission if it used. The code is: AQHQ10 Links to all the products used in this video are in the description as usual. Thanks for watching!

@sheffcitys2forgedinsteel255

Жыл бұрын

Where are you based ?

@AutoCareHQ

Жыл бұрын

@@sheffcitys2forgedinsteel255 I'm up North but don't do that much detailing professionally atm :)

@sheffcitys2forgedinsteel255

Жыл бұрын

@Auto Care HQ not near Sheffield then? Okay sorry thought you did it for a living ( Detailing ) my bad

@AutoCareHQ

Жыл бұрын

Unfortunately not I’m afraid! Thanks for watching though 😊

@sheffcitys2forgedinsteel255

Жыл бұрын

@Auto Care HQ no worries, your welcome , nice channel 👍

I have a Karcher K2 and the hose and Lance are diabolical. I upgraded to the a stubby gun and a proper hose both from in2detailing and I love it.

I got the Direct Hoses SSG for my Nilfisk C130 and I’m very happy with it. Being able to attach a snow foam cannon is a added bonus

I did similar and got the in2detailling one about 3 years ago. Loved it overall and found the swivel based very free flowing. Swapped for a MTM just because my hands as I’ve got older ache sometimes. It’s a totally different beast in terms of trigger ease. However found the swivel not easy so took it to pieces and rebuilt it with some PTFE tape and a bit of lube and now it fantastic I’d take the cheaper all day long if I was younger or a weekend warrior. It’s over 50% cheaper in price so bit of a no brainer tbh

Hi Heather, as I only clean my own 2 cars I opted for the autobrite stubby gun ,priced at about £35 , had it for about 2yrs now and its performed really well .

I’ve been using the MTM for six years now and has gone through a lot of car washes and still runs like a top

I bought the cheap shirt trigger from CYR years ago now and it’s still going strong, great product! Love the video!

@AutoCareHQ

Жыл бұрын

Cheers Alex!

Hi Heather, another great video, I brought the in2detailing gun not long after you first feature it, and have to say it was the best thing I did. Thanks for all your helpful videos.

@AutoCareHQ

Жыл бұрын

Thanks Nigel, really glad you're happy with the purchase!

When I started doing my car on a regular basis, I bought a cheap quick release gun on Amazon that also came with the karcher hose adapter. All I needed was the swivel joint, as I'd already bought a new anti kink hose to replace the absolutely pathetic hose you get with the K2. Apart from the new hose, which I did spend a few quid on, it's all cheap and cheerful, been going about 2 years or so with no problems whatsoever and I've bought quite a few quick release accessories along the way. Also have the karcher adapter so I can still the dirt blaster attachment without using the karcher gun. It's all good. :-D

Very thorough comparison as we expect here. Same conclusions as I have too. The main difference is less hand fatigue and the satisfying connection you get with the MTM.

@AutoCareHQ

Жыл бұрын

Cheers Chris!

Great video as always. It’s good to see you back on the lil screen! Hope all is going well for you and yours… Thank you for your efforts. 🙏👍👏

@AutoCareHQ

Жыл бұрын

Thanks Antony I appreciate it! Hope you're well too :)

Thanks Heather great first hand review. Interesting to get your perspective as usual.😊

@AutoCareHQ

Жыл бұрын

Thanks for watching Stephen :)

Nice thourough review 👍🏻 I’ve got the AD stubby gun which is very similar to the I2D and love it, nice that the MTM has a easier trigger and stainless but as you say for the average person not worth over double the price.

Great video Heather, well put together and presented. Just what I was looking for as I have the same In2D gun that is a few years old and has taken a beating.

@AutoCareHQ

Жыл бұрын

Thanks very much Kenny!

Great video Heather! Good to see an in-depth comparison of the two guns 💪

@AutoCareHQ

Жыл бұрын

Thanks very much!

Nice honest vis Heather. It’s my living and I use good quality value for money guns and equipment. Yes I use expensive chemicals, known brands but to be honest that’s for the customers benefit. I detailed a friends car (free)with a hose, two buckets and some auto glym wash and a mid range sealant and to be fair he was more than happy and the car looked great. Buy what you can afford and afford to lose or break. Great work Heather.

@AutoCareHQ

Жыл бұрын

Thanks for watching :) Yep I think if you're doing it professionally you definitely feel the benefits of the SGS35, I also think it looks more professional as well

Another fantastic and informative video Heather

@AutoCareHQ

Жыл бұрын

Thanks Mark!

Thinking of buying a gun so great video for me thanks for putting it out there

Nice comparison. I went for the S/S version mainly because I use that as a factor in all of my attachments/fittings such as nozzles & lances.

@AutoCareHQ

Жыл бұрын

Thanks for watching Shaun 😊

I went with mtm after my stock gun broke. I seen reviews of cheaper guns blowing up on occasion. The price on the mtm was hard to stomach because my pressure washer cost the same price but I’m much happier and it’s working like new 1.5 years later. I would get it again if it would ever break

@ACHQ: Good comparative analysis. Thank you!

@AutoCareHQ

Жыл бұрын

Thanks Arthur!

Good honest review Heather 👏for us keen weekend wash warriors on a fair budget, you can't go wrong with in2detailings offering or any other similar one at that price point. The mtm will always have a place in some deatailers equipments provisions.

@AutoCareHQ

Жыл бұрын

Thanks Graham!

Great comparison and insights. Thank you

Nice one Heather, that's a good little review. I've just invested in my first stubby, to replace the standard Karcher K series gun and, like you mentioned, because I only have a couple of cars to clean, I got an In2Detailing one, but not the entry level, I think it's a good bit of kit for the money. All the best.

@AutoCareHQ

Жыл бұрын

Cheers Lee, the In2Detailing one is cracking value for money!

Great comparison Heather. I looked at the SGS35 for my Nilfisk, but couldn't justify the price. I also found availability of these guns a problem when I bought one last year. After a while searching, I eventually settled on the MTM Hydro Astra. Halfway in price between some of the budget guns and the SGS35. Excellent build quality and comfortable to use. Definitely wouldn't go back from using the quick release nozzles. So much easier.

@AutoCareHQ

Жыл бұрын

Thanks Steve :) Totally agree, I really wasn't a fan of the standard Karcher gun at all

a great and unbiased review! you can make an informed choice based on this.. If you use anything infrequently and money i tighter you know what to do.. if however money is less of a problem then affording the few improvement is fine too.

Great review, thank you for doing this

Thank you for an insightful and through comparison video between the two. I have been thinking about getting a trigger gun like one of these as the Kranzle gun and lance is a chore.

@AutoCareHQ

Жыл бұрын

Thanks very much Darren! I'm using the SGS35 on the Kranzle atm and it's brill

very informative thank you for this video

I purchased an entry level gun for my K5 (might have been CYR or similar I honestly can’t remember). As good as it is I feel like it almost throttles the pressure washer because the output isn’t a powerful as the original karcher long gun. However it is much easier to use so have to take the rough with the smooth. Great video as always 👍🏻

@AutoCareHQ

Жыл бұрын

Cheers Dave!

Great comparison, thank you 👍😁

@AutoCareHQ

Жыл бұрын

Thanks Dave :)

Great video again Heather, thank you. I sprayed my MTM with a quick squirt of WD40 Silicone spray, instantly it made it a lot smoother for attachments and 1 year later its still the same. Stainless steel is the way to go although costly.

@AutoCareHQ

Жыл бұрын

Cheers Simon and thanks for the tip!

@jackiebhai3695

20 күн бұрын

My quick disconnect is very stiff when changing nozzles. Am I ok to WD40 this ?

Wasn’t expecting to see a little finger work out today 💪🏼 MTM is on my list of wanted upgrades but have a direct hoses one which like your old one is a bit tatty but not let me down.

@AutoCareHQ

Жыл бұрын

Haha it did really start to ache with the In2Detailing gun 😂 To be honest the only reason I upgraded was because I bought the Kranzle and was getting very carried away with pressure washer equipment lol

Great video Heather. I bought the MTM version and very pleased with it, works well with my Karcher K4. It also works well with my MJJC snow cannon. The MTM is perfect for cleaning the wheel arches.

@AutoCareHQ

Жыл бұрын

Thanks for watching David :)

@davidbutchart6226

Жыл бұрын

You are welcome Heather. Really like your channel as I learn lots of tips and tricks 😀

now i want an after market nozzle.... another thing i didnt know i needed ;)

Excellent comparison Heather!👍🏻. I’ve tried the cheaper one but gone back to the ava stubby gun with a quick connect on the end of it 👍🏻👌🏻

@AutoCareHQ

Жыл бұрын

Cheers Rob, the Ava stubby gun looks head and shoulders above the likes of Karcher for accessories

@robtallentire1051

Жыл бұрын

@@AutoCareHQ definitely. The build quality is also much better too .

I've been umming and hahing around one of these for a while. Halfords have the Autobrite Direct one in their sale, I've taken the plunge and purchased one

The in2detaling is a no brainer choice if you're a weekend warrior like me, although i bought the Halfords one to replace the Karcher gun that came with my HD 4/8, but to be fair it looks more than capable to suit the needs of a full time valeter at a price thats not going to break the bank.

Thanks for sharing the link for the aftermarket nozzle, I'll be looking into that 👍🏻

@AutoCareHQ

Жыл бұрын

Cheers Luke!

I had to upgrade my budget trigger gun due it not being able to handle the more pressure of my upgraded nilfisk. I ended up going for the sgs35, works perfect now.

@milord0705

3 ай бұрын

Hi , is it hurts your hand? I have the cheapest gun but the vibration is too strong and it hurts my wrist. Is it because of the gun or because of I am not strong enough to hold it

Great video I have just bought the Suttner st2300 but will also be getting the sgs35 to add to collection

@AutoCareHQ

Жыл бұрын

Cheers Dave!

@aaronolsen8787

Жыл бұрын

Did you end up getting the SGS35? Any preference on it vs the suttner as to which is more ergonomic or easier to keep the trigger pulled? Thanks!

Got the in2 detailing gun worth every penny 😊

I have just ordered the sgs35 from carscope with lance and coloured nozzle set can’t wait to try it the quality looks far better plus will be a great upgrade on for my K7 . Great comparison of both stubby guns

@AutoCareHQ

Жыл бұрын

Cheers Andrew, I'm sure you'll be really pleased with the SGS35!

@andrewlee109

Жыл бұрын

@@AutoCareHQ thanks. I just need / want the MJJC foam cannon to go with it up everywhere I have looked it’s not in stock .

Sgs35 any day, used a cheap one from in2detailing over time the trigger got really stiff and made my hands cramp. Plus the sgs has largers internals and you can feel the increased flow. (Karcher k7 user)

Nice comparison, the most notable difference is the ease with which the triggers can be pulled and held. Other than that they both do the same thing.

@AutoCareHQ

Жыл бұрын

Thanks for watching :)

I don't use snow foam or pressure sprayer but, still found the comparison interesting....if it does the job and is value for money, then the budget one would be for me...thanks for the video 👍

@AutoCareHQ

Жыл бұрын

Thanks for still watching I appreciate it!

As a home hobbiest with a few cars to maintain I switched from the basic In2Detailing one to the MTM one mainly as I got for a STEAL in a Black Friday sale (£50!). It is a great deal tougher, feels like it will last forever, though the basic one does a perfectly fine job. A very good comparison vid anyway, nice work!

@AutoCareHQ

Жыл бұрын

Cheers John, completely agree with that! That’s a cracking deal as well definitely worth it at that price!

@Flyingtwiglet

Жыл бұрын

Who was doing the Black Friday sale? I need to look out for that

I’ve got these plus the Sutner St-2300 to test and review. Great video as always

@AutoCareHQ

Жыл бұрын

Looking forward to your reviews, cheers Steve :)

@Geeky_detail_reviews

Жыл бұрын

@@AutoCareHQ no problem Excellent work as always

@aaronolsen8787

Жыл бұрын

​@@Geeky_detail_reviews do you prefer the SGS35 or the suttner gun? Is one easier to keep the trigger pulled or more ergonomic? Thanks.

@Geeky_detail_reviews

Жыл бұрын

@@aaronolsen8787I love both to be honest. The smoother of the 2 is the Sutner in my opinion Just pips it. But can’t help but use my SG35

Good review Heather. I have a generic Chinese one that's three years old. Touch would it's still going fine other than the quick release mechanism is not as smooth as it once was.

@AutoCareHQ

Жыл бұрын

Thanks Stephen!

I also have the in2detailing gun. On my karcher k4. And like you my only problem with it is the quick release system for the nozzles. They don’t always want to come out as easily as they should. Great video.

@AutoCareHQ

Жыл бұрын

Thanks Matt!

@jackiebhai3695

20 күн бұрын

@@AutoCareHQmy quick disconnect is very stiff and the nozzle doesnt come out easily. Am I ok to WD40 this. ? Thanks. Just bought it today.

Hey, Heather, I hope you are well, still, I'm working on a Kranzle pressure washer gun it works very well, and thank you so much for your explanation, Today I learned this topic very well, Best regards. ,

@AutoCareHQ

Жыл бұрын

Thanks very much Jorge, hope you're well too :)

@jorgeaceves2068

Жыл бұрын

@@AutoCareHQ 👍

Make video on how to foam and rinse underbody/undercarriage cleaning/washing

I got one of the MTM after watching folks talk about it several years ago. Stainless is the way. My brass fittings are slowly messing up. Slowly buying better stuff

And is why you buy the SGS28, lighter weight and smaller in size 🙂 Another great review, thanks. By the way, am I the only one who actually likes long lance? I have an SGS28 but most of the time I just use my OE kranzle gun with 400mm lance.

I have a stubby trigger with Brass fittings and find the quick-release connector goes ‘sticky’ with surface corrosion and on a few occasions has ‘spat out’ the end nozzle because it hasn’t seated and locked in properly - once it flew out and hit the car window 😮 Totally agree with the ‘trigger fatigue’ Heather so I would say the MTM is the way forward in the long term.

@AutoCareHQ

Жыл бұрын

Thanks for watching Steve :)

@MYNYDD-MOTO

8 ай бұрын

Yes my autobrite one has done the same thing, had it around 3 years now

Think one thing to bear in mind is hoses. If upgrading to a stubby, good review, use the cash saved to upgrade the standard hose to a longer wrapped/braided anti-kink which can be made up to suit machine fixings.

Great to see this comparison! I’ve got a similar generic gun from another brand and I’ve always wondered if an upgrade would be worth it. I’d love something which keeps the trigger pulled down rather than that daft lock thing (does anyone even use that), be a massive fatigue saver 😂😂

@AutoCareHQ

Жыл бұрын

Thanks for watching! That would be so good, I think they can't for safety reasons but I wish it was a thing 😂

@pantac4493

Жыл бұрын

The trigger is so light on the mtm it’s just like holding the gun without a trigger, amazing difference from my stock gun

Nice comparison

@AutoCareHQ

Жыл бұрын

Thanks Sam 😊

A thorough and fair review Heather of both guns. I've got a Direct hose stubby gun which I've had for 3 years now, the only issue was the internal plunger where it presses down onto a small metal disc which eventually got pressed in and the gun wouldn't give full pressure, I did a repair which is still working but I do have a backup gun.Possibly an issue with some cheaper guns maybe after prolonged use ?

@AutoCareHQ

Жыл бұрын

Thanks Mark :) Can imagine there being some niggly things like that with the cheaper ones if they're used for a really long time

That quick release should be THE standard and I'd make all others illegal. Also, I like the lock out function. I wish my Worx Hydroshot had cruise control.

Good video,as usual Heather 👍 Being a weekend warrior,not sure I can justify the expense of a MTM.

@AutoCareHQ

Жыл бұрын

Thanks Richard!

Nice review

Thanks for the comparison and code Heather 👍 Like phone chargers I wish they would just make all pressure washers with the same connector as I have a bosch which is hard to source guns for.

@AutoCareHQ

Жыл бұрын

Thanks James :) This vid from Darren might be useful: kzread.info/dash/bejne/fGSYxcOtdr2rmaQ.html

@jamesbartlett5005

Жыл бұрын

@@AutoCareHQ thanks 👍

I wound up buying the in2detailing deluxe gun for my K4 and I absolutely love it. Nice soft grip and decent build. It still has brass fittings etc, although seems far superior to the Karcher one. Think it was around £40/£45 and one of the best things I've bought along with a softer 5m hose.

@TommyT_

Жыл бұрын

Do you know the difference between the deluxe, standard and pro is it simply the aesthetics and outer materials

@martyp2138

Жыл бұрын

@@TommyT_ I have no idea to be honest. It was only an extra few quid and the soft touch grip at the back of the handle made it more appealing. Great gun although notice it’s out of stock at the moment.

@TommyT_

Жыл бұрын

@@martyp2138 yeah I have it too but can't remember why I opted for that one specifically

@anthonycross6392

Жыл бұрын

Hi Marty I also have a K4, do you get an adapter with the in2detailing gun to fit karcher? I'm a newbie to detailing equipment. Thanks 😊

@TommyT_

Жыл бұрын

@@anthonycross6392 yes. You select the fitment you require

Nice video! Did you ever try the mjjc pressure washer trigger gun? Is it made with brass or SS?

Watching the video and was feeling good about my purchase until you said "if you're just washing your car" that the MTM was overkill and I took it personally 🤣😂 cause it's all I use it for, well exception of me washing a friend's car. But I'm happy with the MTM or I'm going to just look at the positive points you made about it😂 Good comparison video

@AutoCareHQ

Жыл бұрын

Haha honestly I think if you've got the budget for it the MTM is a great upgrade, just didn't want anyone to feel like they absolutely had to get the more expensive one to get the job done

Really useful video! Could you send me a link for the nozzle with rubber cover that you use please

Good job

I’ve been using a Amazon gun that’s been through hell and back and have no issues bought about 30 bucks it’s been about 2-3 years now

I got the MTM after I was suffering fatigue from the cheap versions.

Love this video, not seen a comparison of the stubby guns on any of the other major detailing channels on YT, also I’ve been thinking about getting one for a while but I still consider it a ‘nice to have’ against other products I’m prioritising currently. One slightly observation though, brass like-for-like has better corrosion resistance than stainless steel. Will last over 100 years, it will go green/blue colour after a while though which is the zinc reaction but it’s not corrosion. In this scenario they’re using stainless steel for cosmetic and weight purposes. Brass does cost less as well.

@AutoCareHQ

Жыл бұрын

Cheers Phil and thanks for the info!

@pantac4493

Жыл бұрын

I have a mix of brass and stainless quick connects , all the stainless looks and functions like new, not the same for the brass, they get harder to use with age

@philgornall

Жыл бұрын

@@pantac4493 yeah it’s a fair point, it’s softer so no doubt constant reconnections warp the fitting over time. I was only pointing out that it certainly won’t corrode within the timescales of use. There’s a reason brass still used as the premium type of connection in bathrooms etc. but the point there is they’re rarely touched, as you’ve pointed out.

@pantac4493

Жыл бұрын

@@philgornall yeah don’t intend to change out the brass quick connects anytime soon unless it becomes a bigger problem, the output of the gun is where I like having stainless the most because of changing out nozzles and accessories. I would recommend a MTM stubby, I have the sgs28, other models seem to be similar, the light trigger pull makes a huge difference in user experience to me

Great video. I have the cheaper version and has lasted years tbf

@AutoCareHQ

Жыл бұрын

Thanks Daniel!

Try a few drops of silicone oil on all the joints and o rings and the gun will be smooth and quiet. 👌🏻🇨🇦

Another great and honest video. Quick question, I would like to get one of these but find my pressure washer (a K7) is very powerful and I use it on one of its lower power setting via the power adjustment on the standard trigger. With these new ones I guess you lose that pressure control? Do you find that it's too powerful or is there still a way to control the pressure?

@AutoCareHQ

Жыл бұрын

Thank you! Unfortunately that’s the downside that there’s no adjustability on either of these two guns. I know some people who use a K7 with them both though without any trouble, probs just need to be a bit more careful with how close you hold it to the car

I have the MTM28 with a MTM 40° degree tip that has a blue rubber guard dam thing cost $65 Australian just for the tip So i will be buying the normal one's, but i'm yet to use it. The gun and pressure washer fitting set me back $220 Australian dollars.

My cheap one quick release brass coupling has failed only bought last may currently sourcing new part

Do you have a video about hoses?

Hi heather another great demonstration you have got to many gadgets you will need a bigger place soon 😄😄

@AutoCareHQ

Жыл бұрын

Cheers Dave, I definitely need a garage now 😂

Good video, i wonder can you use both of these guns for example on karcher k4 or any other pressure washer?

@AutoCareHQ

Жыл бұрын

Thanks for watching :) Yep as long as you swap the adapter for the hose you can use it on any pressure washer

I’ve just upgraded to a stubby gun for use on my Karcher k4 , I find when using the autoglym snow foam bottle it’s comes out to powerful , hits the car spraying everywhere, is there any setting’s or tips to reduce this , would I be better just using a snow foam pump sprayer for this step instead

Hi. What kind of quick Connection do you use at the input and output on your trigger gun?

I just got the Karcher K4 does the MTM fit it straight out of the box or do I need certain connectors/a different hose?

Does anyone know if the auto glym snow foam cannon goes straight on the cheaper version?

Can the hose on the either of the guns swivel when under pressure/in use?

Good comparison. Question: before buying a trigger/short sprayer, what's it like when you connect a foam to it that's full of soap? Too heavy? Right now, I'm pulling the trigger and holding the wand on a wand type sprayer with foam cannon attached. I dont want to spend money and make my job harder. Thanks, Heather.

@AutoCareHQ

Жыл бұрын

Thanks Kim. When it's completely full I can hold it with one hand and it doesn't usually get achy as I can manage until it starts to dispense and gets lighter. It'll definitely be easier than using a longer lance though where you have to use two hands

I have the in2detailing "Deluxe" gun and I have no idea what the difference is between the deluxe and other ones tbh

I am always reluctant, or say it , scared to get stubby gun because of the warning that it might mess with the pressure water motor. You are changing the flow rate dynamics after all. I have a karcher K5 and the handle is very stiff, plus , swivel would help a lot with hose kinking ...

@AutoCareHQ

Жыл бұрын

I've been using mine for quite a long time and never had any motor issues. The max flow rate of the gun massively exceeds the flow rate of the pressure washer

@Bull1the1Great

Жыл бұрын

@@AutoCareHQ thx for the insight...

@pantac4493

Жыл бұрын

The gun just acts as a valve, the flow rate and psi changes with nozzle tip orifice size

@Bull1the1Great

Жыл бұрын

@@pantac4493 good point ...

Got the MTM gun , doesn't flow any water, possibly sending back due to a fault, you had any issues? My cheap stubby works fine, not a good start for the MTM

Will both of the guns fit on a karcher hose ?

how do you deal with stone chips on your red mazda

You mention the guns, but what machine can you use these on?..

I'm waiting for your video.

Hi Heather , I’m going to go for the MTM SGS35. I buy from in2detailing quite regularly. I use a Karcher K2 . Am I correct in saying that no one sells the quick release fitting along with the gun? Do I have to purchase that separately? . It’s the MJJC foam canon I’ll be using along with it. Always enjoy your videos. Great work. Just about to give mine the full works as Spring is almost upon us!

@AutoCareHQ

Жыл бұрын

Hi David, the quick release gun will come with a 1/4" quick release adapter to fit onto the foam cannon but the MJJC is a little different as it has a different adapter which has compatible pressure washer fitting glued into it. It is possible to get a couple of spanners to snap the glue and release the Karcher fitting so you can screw the new 1/4" adapter in but it's not very easy to do it. The easier option is probs just to get a new adapter from from In2Detailing (www.in2detailing.co.uk/products/mjjc-foam-lance-cannon-pro-replacement-adaptor?ghref=3377%3A53788) with the 1/4 adapter already on it. Hope that makes sense!

@davidsteel8468

Жыл бұрын

@@AutoCareHQ Thank you Heather 🙏👍

What is the difference between SGS35 UK and SGS28 US? It looks like SGS35 UK has higher PSI rating (5075) compared to SGS28 US (4075) - SGS35 exclusive to UK? SGS35 UK (Black) has the same specs of SGS35 Aqualine (Blue). I am confused.

Is there a way to adapt the MTM to fit on a Karsher pressure washer? I love your content! Thanks in advance!

@AutoCareHQ

Жыл бұрын

Yep I'm using it on a Karcher here. When you purchase one you just need to select the right adapter and it'll fit straight onto the hose

@simontherien3387

Жыл бұрын

@@AutoCareHQ Thanks a lot !!

@AutoCareHQ

Жыл бұрын

@@simontherien3387 No problem, thanks for watching!

Nice comparison!

@AutoCareHQ

Жыл бұрын

Thank you!

Great video! I'm also wondering, what hose do you use? It looks very skinny and easy to handle. Does it tend to tangle?

@AutoCareHQ

Жыл бұрын

Thank you! I used this one on my K4, miles better than the stock one: www.in2detailing.co.uk/products/karcher-k-series-c-clip-to-c-clip-reinforced-heavy-duty-rubber-replacement-hose?variant=32368465313871&ghref=3377%3A53788

@wujolie

Жыл бұрын

@@AutoCareHQ thanks!

Foookin hell mate, carscope does not ship nozzles abroad, only to UK, is there any nozzle brand with similar quality available in Europe?

Hey Heather. What wheels/mags do you have fitted? I have the same car and like the look of your wheels. Thx in advance.

@AutoCareHQ

Жыл бұрын

Hi Raj, here's a link to the wheels. I've got the 17x7" ET40 4x100 ones in Hyper Black :) jr-wheels.com/category/jr28

@RajGheevarghese

Жыл бұрын

@@AutoCareHQ Thank you Heather. Much appreciated.

I need one of these in my life! The kartcha one drives me mad trying to do wheel arches and under the side skirt areas! That into detailing is a insta purchase at that price 👍🏽