I am currently in school to be a heavy diesel tech and one of my current classes is brakes. We just this past week were working on some slack adjusters and the rest of the system and everything was seized on it. This definitely would make life easy to get those Clevis pins out!

Thank you cp.

Could have used that 30 years ago. Great job CP. Always nice hearing about new tools. Give that tool to a younger wrench that will doing it for a long-time

@CPthetooladdict

20 күн бұрын

Right on

@DSMetal14

8 күн бұрын

Been doing HD stuff for a couple of years. Probably a good idea to use the press instead of beating the slack adjuster with a mini sledge.

The 41850 and it’s smaller brother “if that’s apart of it” if not no biggie would make my life so much easier! I work on 95% heavy diesel, Semi trucks and tractor trailers. 75% of them still run drum breaks with automatic slack adjuster and a couple manual slacks to! I couldn’t begin to tell ya how much blood, sweat and swear words I have to put in to get stubborn slack clevis pins out on a normal basis! This/those tools would save me so much time and effort it’s not even funny! I Can promise you if I get these almost every other day they would be used for the rest of my career keeping trucks moving this country! Side note great to see Lisle putting out more heavy duty tools!!! Thank you for always keeping guys like me informed!

Great video CP.. I enjoy your review videos and have bought many tools you have reviewed in the last year or so. I took a 10 year break from wrenching. Applied for a job driving truck long story short turned into a private mechanic for a family that owns 6 companies. They got me working on anything from 8n tractors, merc 25 hp outboard to c18 cats in some jones mighty giant hay grinders and e model cats. Keep the videos coming brotha

30 years ago I would of been in line what a nice tool hopefully someone will cherish it pretty cool CP 👍😎👍

@CPthetooladdict

23 күн бұрын

You and me both!

I didnt know Lisle had the 41850, thank you for the vids regarding heavy duty tools. Lisle is a great company, and in fact I still have one of their wood creepers. Since I am not a yougster, and fight the slack adjuster issue daily, this tool suggestion is perfect. Since our shop is in a remote area, we only see the snappy truck once in a while, so vids on new tools is fantastic. Please keep them comming, and thanks again!

Well, I maintain and fix a fleet of over 100 trailers and I am always fighting the battle of clevis pins just not wanting to Come out properly I would love this like it’d would make my life a lot easier

41850 nice press tool, although I could use it working on fire apparatus. I will voluntarily withdraw my name for consideration. I would suggest a newer, younger technician would be very appreciative not having to purchase it themselves. Thank you for taking the time to review and offer to a viewer of your channel.

@CPthetooladdict

24 күн бұрын

You are a good man!!

I work on my own trucks so send it to someone that works on class 8 trucks for a living. Another use for the pin press / cotter pin shear is on anything that uses a yoke with a pin connection like the roll backs that have linksge from both sides of the truck to a centet mounted multiple spool valve body or similar setup with knuckle boom loaders or even on old cable drill rigs ( oil or water well )

First off excellent video I’m glad you brought these tools to my attention because both me and my coworker could use them on an almost daily basis, The Lisle 41850 is something I could’ve used several years ago When I just started out and still could really use very often working in the rock/ coal slag pits on Cat and Komatsu equipment I think that would save a ton of time and money from having to constantly break out the needle scaler and the penetrating oil. But to answer the first part of your question no I don’t deserve that as a freebie, but I definitely would love to have it and I’m going to get one either way lol thanks again CP

Cp you are like my matco dealer always showing me something that I just have to have i never seen anything like that i have had to cut the clevis off out in the field before

You had me at sweat and butt. I thought that would fit in my service truck perfectly.

Lisle makes great tools.

I work on all semi trucks and trailers .. IYKYK those pins are the biggest pain to remove after years and years of road grime.👍 pin removal tools would be 💯👍

@CPthetooladdict

21 күн бұрын

Thanks for the info

I would use the clevis pin tools. Would save alot of time. Some of these trucks are old and get rusted up and the clevis pins won't come out and you have to cut them and it takes time. thanks for the video!!

@CPthetooladdict

24 күн бұрын

You're in!

@warrenblanchard889

24 күн бұрын

Great video brother as always I maybe would use them on my duramax but I would rather see @123donmaster end up with them knowing he would use them more and I love his videos he is straight up like you no bs

Very handy

As a newly self employed mobile mechanic based out Northern Kansas working on OTR trucks and trailer with the struggle of road salt rusting everything. The slack adjuster tools could be a good alternative to rolling out the torch hoses and air hammer all the time

@CPthetooladdict

24 күн бұрын

For sure, great comment

@markm0000

24 күн бұрын

Get one of those induction heaters. Worth every penny

I wouldn’t use it but I think it’s a great thing that u r doing CP!!!

Not for consideration, but i work for my county road commission repairing our snow plows and road maintenance equipment up here in Michigan. Having to frequently leave the shop to do repairs on the side of the road, both the 41840 and 41850, would be invaluable to have in order to break through that lovely rust belt corrosion. I believe the tools should go to someone who frequents roadside repairs in the snow. Give those who suffer that nonsense a helping hand.

Wow I didn't look at all the other comments I see that there are alot of us who truly care about our trade. Salute to everyone who is pulling wrenches and getting their hands dirty. Don't worry I won't say anything about the clean money 😂👍🇨🇦🔧

Maybe in future I might need one but I'm now allowed to touch breaks even though I'm more knowledgeable than some of the newer guys in there shop I find it kind of funny

Great video man, and that’s awesome of you to give stuff away! I don’t work on heavy trucks or I’d be all over it 😂I’ll probably have to pick up those axle nut sockets. I don’t see a whole lot of those, but I’m sure I will someday and I like to be ready for it!

@CPthetooladdict

24 күн бұрын

Thanks 👍

I'm only 3 years in as an actual tech and still building my collection for more specialized tools. I recently started at a heavy equipment shop and previously was a big rig guy. I'm the only one at the shop who works on our delivery trucks because of that.

You’re awesome!! Great video!!

@CPthetooladdict

23 күн бұрын

Thanks so much!!

Thanks for your time and awsome videos brother

@CPthetooladdict

24 күн бұрын

My pleasure!! My friend!!

Incredible video brother. Thanks for sharing. Nice haul. Keep the content coming. Hope you have an incredible night. Much love and RESPECT brother

@CPthetooladdict

24 күн бұрын

Thanks a bunch

Hey CP if you still haven’t picked someone I would to receive that pin press. I’m a 20 year heavy diesel tech I have been on disability for the last year and a half and am now getting back to work. Due to hard times I have to sell off some of my tools. Now that I’m back to work I’m having to replace them. Thank for the great video!

You had to know that I'd be all over this one like a dirty shirt. 30 plus doing heavy truck stuff. I commend you fellas on the car and small trucks. Also you had to of known I'd comment before the end of the video. How could I not after hearing big truck stuff. Without further ado. Pssst I'm sure that I will be back shortly 😂😂😂😂👍🇨🇦🔧

Great video CP. I love lisle tools nothing but quality. That tool would be great up here in the rust belt. Some of those pins can be absolute bear cats when they get rusted in. It would save so much time I would love to own one as hd fleet mechanic

@CPthetooladdict

24 күн бұрын

Thanks 👍

Man look! I primarily working on suspension on semi trailer and like @123donmaster said, trailers come from rustbelt 9/10 need to cut those clevis. Lisle kick ass for these tools. Half of the price also to what TIGER TOOLS want for these exact style. Doing slack adjuster and whole chamber replacement would be a treat with those!

Awesome video nice hoping someone up I would like to try that pin tool out but I don’t see it fitting in a lot of places maybe on trailer air brakes wheee the rods are longer or if the rod was cut and the slack is spun away from the can bracket

👍

Well, my birthday is coming up

Save me from having to bust out torch on slack adjusters.

Jeepers!

Sweat and Butt! Lol!

I work on scooters so let me know when you do a light duty give away 🤣🤣

Haha the air freshener 😂

I don't feel like i deserve the 41850 or the other one but they a pair slack adjusters more often then not have a big pin and a little pin. I would really like to have since you are giving them away and the would be great to have in the rustbelt they would be appreciated.

Nice tool haul 👍 lisle makes good tools 🪒🔧🪛

@CPthetooladdict

24 күн бұрын

You got that right!

im in ny everything is rusted beyond belief i have an older item otc once sold that is really getting worn out and no parts available to restore it. could really use thanks

Good job cp

@CPthetooladdict

24 күн бұрын

Thank you David

I could use the clevis pin press. I am the newest mechanic in a otr tires shop. I have to deal with this all the time

LETS GO BABY!!! HD

@CPthetooladdict

24 күн бұрын

Thanks brother!!

Whooo

@CPthetooladdict

24 күн бұрын

Hey Peter!!

let's see it 🛠👍🔧🇨🇦

@danohstoolbox

24 күн бұрын

smells like sweat and desperation 😁🛠🔧🇨🇦👍

@CPthetooladdict

24 күн бұрын

🤣 🤣 🤣 lol

I don't do HD stuff and I don't deserve a prize but I just wanted to comment and say that I did make it that far in the video

@CPthetooladdict

23 күн бұрын

Thank you

Pick me!!!!! No in all honesty that is so good of you. I'm nearing the end of my career and it wouldn't get the use. I'd like to think that a younger fella (or lady) would get more use out of them and that's the whole idea of why you are doing this. Good call Mr CP. I'm already thinking that I would like to find a few of the younger generations interested in the trade to pass some of my stuff along. Please I'm not bragging in the slightest and the only reason I know is I went thru the big "D" so I had to get a number put on my tools and box of course and it came in right around 60k. So ya I will be looking into finding some deserving people. I will just have to trust that who ever I choose does the right thing and not just to take to the pawn shop and get penny's on the dollar for the stuff. Sorry get back on track here. Of course I have to throw in a bit of scarcasm. I always thought that you use a chisel for taking axle nuts off. I'm fairly certain that those marks aren't from the machining process 😂😂😂😂😂😂. Finally I'd be happy just to get a couple of those air fresheners. I will pay the shipping lol. I'm obviously kidding and I can't see why I couldn't find them up here. One other finally knowing how you are about made in the USA you definitely have to give the tools to someone in the states. You rock for that and I have a huge respect for that. I do think it would be funny if you gave it to someone in one of those countries that give us such quality tools 😂😂😂. Sorry this went for to long but it had to be said. Ty again for the content you put out and I gotta fly. Concrete trucks gotta be fixed and back on the road. 10-4 there driver 👍 cmon 🇨🇦 🔧

I wish you held the boxes still while taking it is very annoying

@CPthetooladdict

22 күн бұрын

Why?

@randyhughes5160

22 күн бұрын

@@CPthetooladdict you don’t read the box

@CPthetooladdict

22 күн бұрын

In 4 yrs of doing this, not one person has ever said this, but you can also pause the video and read it if you're really want to read the box. That's pretty easy to do. But it says very little information that I didn't already give. Or you can follow the link and read the items description in Amazon and also lots to read there.

Top 3 tool company's are: Lyle. Cornwell mac

@CPthetooladdict

24 күн бұрын

👌