New 3DS Upgrades For 2024 (and beyond)
Ойындар
Today we're trying out a few of the more popular New 3DS XL mods that will work to make the handheld more modern going forward.
Check out the Spawncast Network: spawncastnetwork.com
Twitter: @SpawnWaveMedia
Threads: www.threads.net/@spawnwaveyt
Spawncast Jerseys: bit.ly/3sZKrgj
Spawncast Spotify: open.spotify.com/show/41qKKRu...
News Wave edited by: / @kimerexprojekt
Second Channel: / @spawnwaveplus6991
Spawn Wave Merch: teespring.com/stores/spawnwav...
Follow Us On Twitch: / spawnwavemedia
Listen To Our Weekly Podcast: / spawn-wave
Like Comment and Subscribe!
Thanks for watching!
#Nintendo #3DS
Пікірлер: 293
For the USB-C mod, you should put a 5.1k resistor between CC1 and GND and another 5.1k resistor between CC2 and GND, that way it will work with all USB-PD chargers
@SpawnWave
17 күн бұрын
Good to know, I'll remember that when I put the final build together. Thanks!
@nickvarley8365
17 күн бұрын
This guy resistors
@armandomorales0921
17 күн бұрын
@@SpawnWavehi spawn wave Please don't mention rgt ever again
@Sacren365
17 күн бұрын
Is that the same as fast charging?
@shadowdancer3888
17 күн бұрын
Hey mate, you seem to know your shit hahaa Can I ask you something, my 3DS stoped charging, and it doesn’t turn on, what could it be? When I plug in the charger, it blinks and that’s all
I was so excited when I saw the hole for the usb c port so nice and factory looking .. I blinked my eyes and it turned into a hot mess 😭😂
H shop ✅ File management ✅ Custom themes ✅ Pretendo ✅ Net pass ✅ Streaming ✅ Wireless charging ✅ The 3DS is a GOD tier handheld!
@Pray4MePls23
17 күн бұрын
And it has an internet browser, folders, themes(by default from Nintendo), mp3 player, a decent d pad and a removable battery
@Gamefreak924
17 күн бұрын
>wireless charging Man is a fake 3DS fan and doesn't remember the charging cradle, which does basically the same thing
@velocityraptor6051
16 күн бұрын
@@Gamefreak924 only the original 3ds got that (and the new XL but those cradles are super rare and would cost you $60+)
@Hyperknux333
10 күн бұрын
@@velocityraptor6051 just buy a 3rd party one ive had one for years for my n3ds xl
$400 3ds is stopping me from doing anything to a 3ds
@generalbokchoy
16 күн бұрын
I got my 2ds for 60 dollars on eBay, it has a fault with the volume slider but it's a relatively easy fix and the batteries are easy to replace too
@BijBijTCG
16 күн бұрын
I can sell you my new 3ds xl woth some games for 350
@SpyderGuy799
15 күн бұрын
New 2ds xls go for way cheaper. I got a N3DSXL with some broken pixels and a rough body off Mercari yesterday for 140
@theawesometeg219
11 күн бұрын
Got a new 3ds XL for $125
@_3.14
10 күн бұрын
buy it japanese, you’ll gonna mod it anyway, and some extra steps won’t kill u; got mine for 72 bucks and it’s almost like new, it does have a tiny little dent on the bottom and came with no stylus; i consider that as a win
Damn. I was just ready to watch RGT’s video but it has a vague title so it’s probably just him rambling and ranting on and on about a bunch of nothing. Thanks for uploading Spawn.
@HENDO24
17 күн бұрын
Ngl, that’s the exact reason I didn’t watch RGT’s video either😂
@IaconDawnshire
17 күн бұрын
Better than watching Playstation Guy being an absolute hypocrite
@jacobprayer8656
17 күн бұрын
I troll RGT, telling him to stop crying each time I see him live streaming.
@christiandelgado1255
17 күн бұрын
I made KZread to never recommend this channel. It’s always crying and complaining
@mrbisshie
17 күн бұрын
@@IaconDawnshire Dreamcast Guy?
"Honey, I want these mods for my 3DS" "Only if you make it tax deductible" Spawnwave's conversation with his wife before this video probably
@zachcarmichael699
17 күн бұрын
They do count as business expenses, so yes.
@loon1994
17 күн бұрын
@@zachcarmichael699 Exactly, especially because this video has the feeling of "look at this cool thing I got" and not in a braging way, but in a kid excited to show you that thing they have been extremely excited to get in the mail
I personally just use a cable that has a Nintendo plug and a USB-A plug to charge. If I was going to do a USB-C mod, I’d do one that replaces the old port, rather than cutting the case up.
@X2Brute
15 күн бұрын
it's nice to be able to still use the old charging cable, especially for things like charging docks
@RetroBoxRoom
15 күн бұрын
@@X2BruteDon’t charging docks just use the two contact plates on either side of the socket? You don’t have to lose that capability.
Mini files are your friend when adding any new ports to your case. Cut the hole smaller than needed and use files to finish it off. 🤘🤘
I got a 3DS Capture Card mod which also doubles as a USB C charging mod. It's amazing and if you can afford it, I'd recommend it. Both for the charging, and for the capture.
I'd love a video on full reshelling of this system! Got the exact same model and considering a new shell, but it's a bit daunting to do
One major 3DS mod I'd love to see is getting a bluetooth audio transmitter to work with it. Especially one with low latency AptX!
I feel bad for your 3ds
Adding wireless charging to the 3DS surprised me.
@LandonEmma
17 күн бұрын
FR
@Jppen
17 күн бұрын
Wireless charging degrades your battery faster, and it uses significantly more power. ifixit recently made a video where they found wireless chargers like this from Amazon take twice the power to charge as wired. It’s really not worth it.
@zachtwilightwindwaker596
17 күн бұрын
I didn't know there were wireless chargers.
@Gamefreak924
17 күн бұрын
Especially since it's pointless due to charging cradles
@donkevo489
16 күн бұрын
buy the charging station and you also have wireless charging
It is more than likely possible to put the QI Charging FULLY inside the case (As long as you mount the actual Charging Unit itself to the outer casing on the inner side) the difference between having it in and out are going to be very minimal and in terms of Looks, it will certainly look better.
@wildcard126
5 күн бұрын
Didn’t even think of that, but I charge my phone this way with the case still on so it makes total sense
I thougt there are kits for changing the og chargeport to Usb C
@zomfragger
17 күн бұрын
There are but those are a bit hard to install due two large factors. One it requires some advance soldering skills to pull off and two it's very easy to get the wrong kit since nintendo changed the board side connections with each version of the 3DS to prevent hard mods from being used to hack the system.
Who else is playing emulated 3DS games at the moment? Fire Emblem is sooo much fun.
@colddogs
17 күн бұрын
I've been playing 3DS emulated in VR with full 3D inside Bigscreen Beta
@Matanumi
17 күн бұрын
Emulation? 3ds is one of the few I fuck with on native hardware.
@johannliebert2870
16 күн бұрын
Not emulated, but im going through Bravely Second rn
@RobinsMusic
15 күн бұрын
@@Matanumiso true makes it so much more fun
@RobinsMusic
15 күн бұрын
I’m playing MH4U natively
Super Great Video, love everything coming out for the 3DS now
Now just need a circle magnet for the wireless charging and Bluetooth Audio. TBH USB-C for data would be amazing on a hacked 3ds.
Excellent video. Thank you, will look for the follow up.
Buy a MagSafe pop socket and rob the magnets and make it mag safe!
The numb change is easily my favorite mod for the New 3DS. Make playing with the C-stick way better! Watch out for getting second hand shell replacements. The 2 i got from Amazon had their Hinge housing snapped after a month.
Quick tip for others interested in doing the USB C mod at home, just replace the original charging port instead of drilling a separate hole (it will still require some case drilling to make the port slightly wider but its easier and looks better), also you can buy a version that does both display and charging and its just as easy installation wise.
I love when you do video like this
I recently decided to mod my 3ds software & added a usbc i did use a smaller pcb
I wish we could get another true handheld that fits in your pocket
@zachcarmichael699
17 күн бұрын
Gone are those days. If you're wanting HD gaming on the go, you have to go big. I mean, technically you could do something like a GBA SP / Galaxy Flip series, but I think it would get pretty costly.
@birdfish86
17 күн бұрын
Not getting that now a days. I say get the Og launch 3ds and mod it or just get a gba sp with flash card. I have a Gba Micro with flash personally.
@BonusCrook
17 күн бұрын
I guess it's fine since every mobile handheld can be emulated on a phone at this point.
@MrHack4never
17 күн бұрын
@@BonusCrook but software buttons suck!
@BonusCrook
17 күн бұрын
@@MrHack4never razer kishi/8bitdo controller
I actually direct change the C-stick using the PSP numb when the New 3DS XL released.
Looking forward to your shell swap video
I don't know how dangerous could be for the system but you could get a rounded set of magnets and make a "mag-safe" for the wireless charging so it always aligns perfectly fine (or you could just make a DIY stand so you never miss it)
You could make a custom 3D printed fixture for the wireless charger to position it correctly. I'm thinking something similar to the charging dock that came with the original 3DS
You should do a pool about what sheel you should put, there's so many options
Play my 2ds xl alot to this day
Dude stole my thoughts and ideas for my switch and razer Edge for wireless charging. Somewhat 😂 good move forward and video
Making the right c stick usable is nice!
I was literally just thinking of usb c 3ds and 48 minutes ago this video was made
If any of you guys have a unmodded 3ds, I would highly recommend modding it.
Already did the USB C and Nub mods, and they're fantastic. Not sure if I would get much use of a wireless charger.
i used the psp analog stck cap on my new 3ds, i just superglued into place and is great
thats so coool, do you do Mods for Wii U too? A Wireless Charging Mod for the Wii U would be so nice!
@Miroslawkrynda6477
17 күн бұрын
The gamepad already technically charges ”wirelessly", just pop it on the stand with the two small pins that it came with in the box xd
I made the exact same mistake with USB-C port lol. I also thought it would be a great place to fit it, but stylus won't go all the way anymore. I ended up replacing that part of the shell anyway (I kept everything else, because it's limited edition and OEM shell is far better quality), so new placement is basically the same as yours, right next to ZR button and it looks really nice. My breakout board is way smaller though (only 4 pins), but I still used some glue just to secure it. Many people replace proprietary port with Type-C, but I wanted to keep it, just in case. Also replaced C-stick with the one from Ali, looks the same and it's far more responsive. Also installed Type-C to DSi XL (next to 3.5mm jack, couldn't find a better place), Vita 1000 (a lot of space between main and left controller board) and Wii U gamepad (hated that thin cable and big power brick). Charging my phone and handhelds using same cable is huge, especially from power bank (via short USB-A to USB-C cable). Didn't need or want wireless or Type-C to Type-C charging. But you could also buy magsafe ring for easier alignment (I have it on my phone case and my powerbank is magsafe compatible). So yea, all my devices are USB-C and I LOVE it. Fairly easy, with exception of Vita 1000, which has very small pins. Nintendo consoles are noob-friendly to mod (just make sure you don't mess up positive and negative).
I did the PSP nub mod some months after the new 3ds launched best mod especially for monster hunter 4 ultimate at the time!
So that's where my new c stick came from! never realized it was a laptop part :O
I literally just bought one. I’m rocking out with Megan battle network operation shooting star. It’s the BEST way to play this game.
Wireless charging for switch 2 would be fire.
@iyeetsecurity922
17 күн бұрын
What makes you think it would be such a hazard?
@Neo_X90X
17 күн бұрын
@@iyeetsecurity922 Read again.. Cause I'm sure I was saying in a way that I would be happy for such a thing vs it being a hazard. LMAO. Maybe you dont understand slang when the word fire means dope or cool. Then just say that.
@skycloud4802
17 күн бұрын
Wireless charging is fine in a pinch, but I very rarely use it as it's incredibly slow, inefficient, and heats up the device.
@Neo_X90X
17 күн бұрын
@@skycloud4802 I mean so is fast charging in a way but I get it, although the tech could be better by the time switch 2 is made.
how is it looking when you close the 3DS with the ThinkPAD button? will it be half open and maybe cause the screen to crack? im picturing the macbook camera cover issue haha
3ds mods are always cool.
Hopefully someone already mentioned this to you, but there are several mods where you order a simple PCB from a fabricator for less than $5 and it will replace the stock change port with USB-C. The soldering is just as simple, with the catch being that you obviously need to desolder the old port. But it will come out clean with no shell cutting required. There's a small panel gap you can 3D print a cover for, or just leave it open as it's not really noticable unless you are staring at it. I'd really really recommend that you look into this before you ruin another shell.
Oh I really want to see the shell swap
That’s just great!!! But Jon I need some light, I’ve got back my 3ds and it’s not charging, idk why, is there a simple way to check if all the rest is working and only it’s not charging? Cheers :)
@zelbiee3678
15 күн бұрын
If you know anyone else with the same DS as you with a working battery, you might ask if you can test their battery in your DS to see if it charges. Batteries are relatively cheap & easy fixes!
if you're going to do wireless charging I'd suggest adding one of those steel rings for magsafe compatibility to make alignment easy
You should try to implement a MagSafe like charging system so it magnetically aligns itself and locks in place.
I'd love to see if u can do any of these mods to a N2DS XL. That's my main system I have and idk if I'd go out of my way for a N3DS
Nice I’m enjoying my modded 2DS XL
Great video, if you could find a way to do the new 3ds xl capture card mod that would be amazing, i have only seen people selling it for hundreds, but have not found the method itself yet
Can you link where you got the stuff for wireless charging, I wanna do the mod but cant find proper resources
Can I do some of these mods, especially type C port on the side as you did there on the new 3DS model? or are the new 3ds and 3ds xl not simmilar enough for this and need different methods
Can you replace the SD card loader to support newer SD card formats?
The X1 nib is specifically a low-profile one. For replacement nubs you will probably find one that is too big and too tall. Just trying to spread the right one. It's also a super easy replacement/removal, just as he suggested. Just the screws to reveal the inner hardware and being careful when you flip it open.
Where the hell does someone find a full housing swap for these things ;w;
The C-Stick mod on a N2DSXL can blend the top screen, especially if you have a screen protector. I replaced mine with a PSP stick some years ago, and over time it started to blend. There isn't enough space for a thicker stick on that console, but it looks like the other models are fine for that.
There's a USB C board that I installed recently and replaces the old port, and apparently it already supports USB-PD. You can also get high capacity batteries. Do you have a link for getting those Cstick nubs? My Cstick is giving me trouble and that seems like a perfect fix.
I made a video of adding Bluetooth and the same USBC charging mod too. Perfect fit. Never tried the wireless charging though since at that point why would I need a device to charge 3 different ways.
Very cool ideas
Would love to do the wireless charging mod, but I lack the tools and knowledge of soldering anything. I know it was mentioned being a beginner level project though. Might be something I look into for the future. My charge port for my N3DSXL appears bent. All 3 of my systems appeared to be this way, so my only workable option seems to be those 3DS charge docks. Just plugging in with a cable doesn't seem to work. No idea how this happened on all 3 units as I do take really good care of my systems.
Bruh I got the new cstick in today and the difference is INSANE! It’s actually like a second left stick! Super comfortable, low profile, fits like a glove, very sensitive input, and easy to install. Undeniably a must do upgrade. Thanks for the tip!
I was considering the charger. I will do the mini stick.
Great video° Question... is there a mod for a better/CHEAPER NFC reader? I would love to try that out since NFC reader prices are insane right now
@nickk6645
17 күн бұрын
There's a softmod that just lets you load in any Amibo NFC data midgame. No need for physical NFC tags
3ds is my fav handheld. I def want to mod a 2ds xl I have in box.
There’s a breakaway board on Etsy that is USB C-PD compatible and replaces the current port AND still supports the dock charging. It’s awesome.
There are 3d printable drill guides to help line up the USB-C port
I’m gonna do the trackpoint mod soon
I dont know much about wireless charging antennae but, could buying a bigger one fix the alignment problem with the charger?
The nub mod I used a PSP analog nub which made it so much easier to navigate
I think some type of screen upgrade would be amazing. Going back to the 3ds the screens look terrible. And not just in terms of resolution the image quality just doesn’t hold up like other older nintendo handhelds
I have been meaning to shell swap my standard black New 3ds Xl, and change the charging port. I really want to find a way to make the SD card more accessible without so much hassle of taking the backplate off and on, I'm pretty sure it has been done, just that it has been some time since I looked into 3ds mods. One of my favorite systems though, sadly it does not see much play anymore, but have been meaning to get back to it.
Someone please make IPS screens for New 3DS (and XL) already
@SomeAngryGuy1997
17 күн бұрын
Some of them did come with IPS screens from the factory
@LicenciadoLoui
17 күн бұрын
@@SomeAngryGuy1997 Currently, having IPS screens depends on that lottery. It's about time we can buy them separately just like with game boy screens.
Maybe put a magsafe ring on ro it to just snap on to the wireless charger
Man, I am really tempted to purchase a New 3DS LL for some 3DS retro emulation but still not so sure.
Ayee nice mods!
I have a Nintendo 2DS XL, hopefully the internals remain the same since I do slightly worry about the changes of internals due to different positions of game card slots, microSD, stylus, etc.
Funny enough I just bought a charging dock for my N3dsxl lol
I'm glad you took my advice from years ago and swapped the c stick with a psp cap. I'm very disappointed though, that neither you or anyone one else on the internet except for me made an N64 Switch dock. It's a super easy mod, and it would have been your best video to date. 🤦
You should have tried wireless magnetic charging instead of just regular wireless charging so that way you don't really have to be exact with how you place it down like the iPhone it would just magnetically stick on
Oooooooohohohoohohoh, gonna have to do these
Got a Japanese n3dsxl for 150 and it’s been amazing looks almost brand new
do you think you'd ever attempt adding Bluetooth? that dongle for the switch that everyone has isn't available anywhere anymore so hardmodding it in is starting to look like a better option
Is there anywhere you can get that thinkpad nub in different colours?
I think I'm the only guy in the US that uses the dock to charge his 'new' 3DS lol I might look into that Qi charging coil mod though. That was pretty neat
I have a charging stand for my 3ds that works just fine
Where do you plan on getting a new shell from?
Is there a way to clone system data such as Mii Plaza so it is the same on 2 different 3DSs? I saw a few videos on it but it's really vague, can anyone provide some insight?
I wonder if you could cram a wireless charging ribbon into the PSP Go... I mean, I have the dock already but most people don't have that.
Are there Mods for the ZL and ZR buttons?
Need to find a soldering class so I can learn without risk I've passed up SO many projects because I don't have this skill
Can you give a link to decent 3ds xl shells? I am worry about quality.
Use a phone case sticker for Apples MagSafe charger so avoid the wrong positions on the pad
need ips mod with all the different 3ds variants. take a tn and make it both screen ips if possible.
I got an idea, but this is probably just for the old 3DS: modifying the cradle to get wireless charging. The design of it destroys the problem of aligning the console completely... I suppose lol
For the usb-c put in near the headphone jack to the left
My 3DS Case is almost completely bad. I have the red paint casing, yet it's almost fully black now ... 😆
I’ve seen some people have translucent shells. Ever seen those before?