Now we just need someone to make those chips.

@Mobik_

Ай бұрын

I don't think so... it has never been the case. FPGA is the only solution everyone uses to "mimic" the old chip architecture.

@kanesmith8271

Ай бұрын

@@ParabolicLabsthere’s many collectors that wish and will rally and protest and lobby against such things being recreated so they can keep their investments

@kanggoo57

Ай бұрын

@@kanesmith8271 Modders are not moronic collectors, someone gets their hands on the BP's, theyre getting remade at some point.

@M1n1malist

Ай бұрын

None of you claiming they can be remade are thinking about that they literally can't, because that's copyright infringement. Nintendo would pit up a stink as that's intellectual property of them. That's why the only way to emulate these chips is being done by FPGAs. (read end comment)

@codycooper320

Ай бұрын

​@@M1n1malisttechnically everything here is copyright infringement. They have the rights to the connectors, plastic molds everything. But they don't care about hardware this old. Only the software which they can re-release as ports/remakes. They won't ever re-release the actual hardware.

This is great! I have a board that I ripped a few pads off of by accident. Now I can salvage the chips and rebuild that GBA

@MachoNachoProductions

Ай бұрын

Nice! Another game boy saved 🙏

ohw man, I wish this was a fgpa like the gbc kit.

@dazealex

Ай бұрын

Exactly, even folks like me with vast electronics experience rather have a pre-assembled kit with a small FPGA or CPLD... My GBA is an older one with no backlight.

@gluttonousmaximus9048

Ай бұрын

All that's left is a (hypothetical) replacement FP-GBA botherboard

@shasta_creates

Ай бұрын

Big time agree; when FP makes a kit for Advance like the GBC I will be all in. I don't have the parts to donate; if I had corroded Advances maybe this would make sense, but I would more readily buy net new

@AlexandreRibeiroXRV7

Ай бұрын

I think that, the way technology is evolving, an FPGA for the GBA (or an FPGBA, hah!) is a matter of when, not if. We just need to wait until a good soul releases it lol

@thomasgebert6119

Ай бұрын

It's not portable, but the MiSTer FPGA has a pretty solid GBA core.

After 21, years 3 generation of handheld console, 8 different machines, and 1 ips screen upgrade and 1 rebuild. I finally finish Metroid fusion.

@buddenjoejoe5549

Ай бұрын

Same Here 😂

Next step: manufacture our own Nintendo CPU and RAM chips... Somehow...?

I wish FunnyPlaying would do a version of the board with no LEDs. If I bought one, I'd turn them off and then put it in a non-clear case. I'd rather not pay for them, and rather not have them potentially turn back on and drain the battery.

@FuriousTortoise

Ай бұрын

Couldn’t you just find the power point for them and unsolder? Should be a fairly simple and fast job if somebody finds the correct spot on the PCB

@drivenbyfate

Ай бұрын

You can just turn them off and the board remembers your settings. I leave mine off most of the time and it's not really an issue. Also removing the LEDs woukd only save them like $1-$2 in production cost, doesn't really make sense to produce a separate board without LEDs.

@HighPower64

Ай бұрын

lol how much do you think those LEDs add to the price exactly?

@ChewyChicken589

Ай бұрын

I wish they would make it take three buttons to activate the LEDs because those of us who like to play platformers like Donkey Kong Country have issues with this because we hold the B button to run and then tap A to jump which sets off the LED settings.

@bryanjs4785

Ай бұрын

The board is already very inexpensive. It was on sale for $50 a few weeks ago

Always up for more GB videos.

- Game Boy Advance used $70 - Motherboard Replacement $63 - Advance Laminated 3.0 IPS Kit $60 - USB-C Rechargeable Battery mod $42 - Advance Laminated Ready Shells $15 - Metal Buttons $31 - Silicone membranes $4 - Shipping fees $10 - Customs fees ... (We will imagine that we have the technical tools to desolder the circuits) -> Total around $300

@maxdemorgan7201

Ай бұрын

I'm going to mortgage my house and I'm coming back 😅

@tanguydelonais9853

Ай бұрын

Thanks

@drivenbyfate

Ай бұрын

Buy everything from funnyplaying for lower cost. Also I buy GBAs often for like $25-$35, just need to buy junk consoles especially since all you are doing is stealing the CPU and RAM. For my last build the breakdown was more like this: GBA: $25 New motherboard: $49 IPS screen: $45 Shell: $9.90 Buttons: $3.90 Membranes: $1.90 Battery: $29.90 Total cost: $164.60. You can even lower this cost more by buying different parts on Aliexpress from hispeedido or cloud game store. True the metal buttons woukd add more cost, but really you can get chrome electroplated ones on Ali for like $4.

@drivenbyfate

Ай бұрын

Buy everything from funnyplaying for lower cost. Also I buy GBAs often for like $25-$35, just need to buy junk consoles especially since all you are doing is stealing the CPU and RAM. For my last build the breakdown was more like this: GBA: $25 New motherboard: $49 IPS screen: $45 Shell: $9.90 Buttons: $3.90 Membranes: $1.90 Battery: $29.90 Total cost: $164.60. You can even lower this cost more by buying different parts on Aliexpress from hispeedido or cloud game store. True the metal buttons woukd add more cost, but really you can get chrome electroplated ones on Ali for like $4.

@user-yk1cw8im4h

Ай бұрын

Yikes. Changing the motherboard makes absolutely no sense and is just sinful. 1) too expensive 2) stock motherboard never dies

your videos are so well produced. It's pretty clear that there really is no compromise... ok , maybe one thing. When someone decides to binge watch your videos, hearing the same background tune kind of stands out.... but yeah, it is a very good one and checks all the boxes.

Only one model is still left aside. Still wishing someone would start making good aluminum shells and parts for the Micro

@MachoNachoProductions

Ай бұрын

I’d definitely be up for that. The micro is definitely underserved with regard to mods and parts. I still haven’t tried those replacement metal shells yet

@brendnbrendn

Ай бұрын

It’s hard to even find decent quality non-OEM faceplates too :(

@MizuhoChan

Ай бұрын

Just need to put a micro screen in a gba sp, then you can have the smaller screen, plus all the nice shells and such available for the sp :)

@kakazi2170

Ай бұрын

When we finally get an FPGBA console that isn't Analogue's I hope they also make a micro one

@adamdavis6671

Ай бұрын

@@MachoNachoProductionsthe tolerances on all the ones I have tried is pretty bad. I would love a new brass or aluminum shell maybe with a full glass face plate

Oh man, Tito you totally beat me to it! I'm about halfway through a very similar project and looks like I now have some SERIOUS competition for the best Gameboy out there. Keep up the good work man!

@bartender_billy6229

Ай бұрын

You gonna make a wooden gba aren’t you 😂

@MrConsoleSpot

Ай бұрын

atleast tito doesn't clickbait his titles lol

@timmygebhard

16 күн бұрын

Watch him overclock it with a custom water cooled aluminum back.

i love it, my only concern is that, since they made a new motherboard, why not include a second speaker? there are a tons of smaller ones that sounds good, and there's enough space on the left side anyway.. i would love a gba with stereo sound

@csolisr

Ай бұрын

As somebody that loathes the side-panned mono speakers of most old portables (and even several smartphones nowadays), I absolutely agree - I'm astonished at the fact that a stereo GBA mod is something no major modder has considered selling

@VIRACYTV

Ай бұрын

Because then they’d have to start making a second series of shells in every single color variant that they already make that had a grill for the second speaker. Which is double the cost for a board that they don’t know if loads of people will buy or not. Everyone can likely swap a shell, not everyone can desolder and resolder 1” chips.

@Dad_Shoes

29 күн бұрын

I agree, but I wonder what they would do with the Start and Select buttons. They'd need to stay put.

Well, I have seen broken GBAs with the cpu and ram intact, the "broken" bits are other important stuff like the board or a massive amount of other components that would classify the GBA as "junk" , this kit is definitely a game changer, this would revive those ones I saw across the years. I am definitely tempted to pick up a few GBAs to try. Excellent video, and keep up the good work!!!

I've been watching the GBA modding scene grow over many years but it's astonishing that someone has even made brand new motherboards with extra features!

I really love your videos. They’re so detailed. Hoping to build a Gameboy like this one one day. Thanks for sharing

For me, the shape of the first Game Boy Advance is the best. It's a shame that this mod mainly looks like a Christmas tree. However, a much bigger screen and stereo speakers would have been beneficial for fans like me.

@supermonk3y07

Ай бұрын

I love the shape of the first Gameboy Advance especially it's default indigo color. Nothing says 2001 to me like a rectangular indigo GBA, and an Indigo GameCube.

@mindustrial

Ай бұрын

Kids these days want RGB in everything.

@hornymonk23

Ай бұрын

Why complain about LEDs when you can just turn them off?

@siem8160

Ай бұрын

@@hornymonk23 The led on this Game Boy Advance is like putting a red nose on the Mona Lisa.

@siem8160

Ай бұрын

@@mindustrial The Game Boy Advance is too serious to be used by kids... I'm joking, of course.

Just ripped the big capacitor pad on a very good condition og gba recently, so kinda bummed I have to fix it or get it fixed now. This video reminded me that funnyplaying makes gba boards now, so while I might not have a near perfect oem gba anymore, I still have this really cool alternative to save the gba in future. Great video as always, tito.

@MachoNachoProductions

Ай бұрын

Sorry to hear about your gba. thankfully we now we have the parts to repair them!

@ChewyChicken589

Ай бұрын

That big capacitor is a problem because I think they glue it down. You have to use a heat gun

@Anotherwhitemage

Ай бұрын

@@ChewyChicken589 ye, i had 3 seperate dead GBAs, and all of them just needed the big one replaced. it was very frustrating to fix as my first soldering project

@user-yk1cw8im4h

Ай бұрын

how about you give it to someone who actually knows their stuff to repair rather than killing it completely and takes it heart out?

@Sparkrdom

Ай бұрын

@@user-yk1cw8im4h Thanks for your contribution, it was SO helpful.

Great video as always Tito! Love your color selection, very Samus color scheme!!

I bought this last year when it came out. This mod taught me how to solder. I hated soldering, and was hopelessly bad at it. I wanted one of these so bad that I decided to conquer my soldering woes once and for all. While waiting for the parts I practiced desoldering and soldering on a broken PC motherboard. When the time came to build the GBA, it worked first try! Now that I know how to solder I've gone down the rabbit hole of countless other projects that I was previously unable to do. Btw, this mod was so fun I built 4 of them, sold 3, and kept one for myself. I built the first one by removing the chipset from my dead GBA (after trying literally everything to save it), and the other 3 I just ordered the donar chipsets from HHL.

Dude I love your content so much its inspired me to make my own handhelds. Thank-you so much

@MachoNachoProductions

Ай бұрын

Thank you 🙏That makes me so happy to hear!

Watching you put in the shoulder buttons so easily makes mad lol. Because when I did a shell swap on my original GBA it took me 4 hrs, because the shoulder buttons kept popping out

Price, Tito. You need to make it a point to more actively consider price as a pro or a con in your pros and cons list more regularly. Price-to-quality is usually the biggest factor in whether people will get a thing or not.

Your video on the funny playing GBC kit inspired me to build my own custom one, if I had a GBA and the soldering skills I would definitely be trying this out also. I love how clear and easy to follow your videos are!

Best way to start in the weekend! Thanks for the excellent videos you keep providing Tito ! The gba looks stunning - maybe I'll give it a try. Would be my first chip transfer and I am very curious how I handle it 😁

@MachoNachoProductions

Ай бұрын

That makes me happy! I hope you have a wonderful weekend!

I think there was only one thing missing: Bluetooth. I'm from Brazil! Big Fan!!

so much advancement in these new PCBs, it's crazy!

Sounds like the speaker is distorting at that volume.

@cuerex8580

24 күн бұрын

i think this is caused more by the air vents than the actual driver.

@mystraunt2705

18 күн бұрын

The gba audio was bad to begin with, its just more obvious when its louder

Nice one, Tito. The metal buttons are pretty cool😎 It crazy how far they went with the adjustments you can do to the leds😮👍🏻✨️✨️✨️

if i made a handheld or even a console and saw people doing this 20 odd years later i would be so proud of the people behind it, its clear alot of work and care goes into keeping tech alive and its just awsome :D

It's so pretty and shiny and I wanna snuggle it

Thanks for the link to that pickup tool!

@MachoNachoProductions

Ай бұрын

You’re welcome!

Hey man, recently had my eyes opened to GB modding and upgrading, your vids have been so fun and informative to watch. I've recently found my old GBC in storage, and seeing these videos has me thinking if it'd be possible to re-shell any kind of GBA into a GBC shell, with modifications of course. Thanks for the awesome content, and keep up the amazing work.

Looks great! Don’t forget to put the copper cooling on the battery 😊

I've built three GBAs with the replacement motherboard so far. It's such a nice upgrade. Great video covering the process!

These console mods are mind blowing it never gets old

All this needs to be just right is two upgraded speakers in stereo, I would mind the speakers with extra thickness with their own larger encloser's to give the GBA better audio, 2 3watt speakers and 2 0.5 watt tweeters would do the job nicely.

I did this mod recently, and it's become my favorite modded GameBoy. I think the biggest sell is that the audio is suuuper clean. My earbuds (ER4XR) are super sensitive to hissing and I couldn't use them *at all* with the original GBA motherboard. This upgraded motherboard has zero hissing whatsoever.

Looks fantastic, seeing all the legs of a chip soldered fresh is always so satisfying, great job. HOw is the D-pad, that was always my problem with the OG GBA, it just felt mushy.

@MaoRatto

Ай бұрын

I remember the OG-gba being more comfortable, but the SP was hands down more responsive!

I love getting notified of a new video from you Tito. They are always interesting and entertaining. Keep up the good work!

@MachoNachoProductions

Ай бұрын

So happy you’re enjoying the channel 🙏 thank you for the kind words!!

It'd have been cool if they could figure out a way to make the LEDs match what's going on the screen (like those ambient backlights for TV's).

Great video! I hope Funny Playing will release a no solder FPGA GBA like they did with the GBC.

👍The intro 360 degree look is sick 🔥

It looks amazing!! Pretty cool hybrid.

I still have my original clear purple GBA (which is now more of a frosted white with a very faint hint of purple), and it's still working fine. The only things I might change/mod at some point are a backlit screen and a battery pack (because chewing through normal batteries is bad and running on Ni-MH cells is annoying with the constantly flickering power LED...). Replacements boards are nice to keep old devices running, but as others said, I find the RGBlingbling totally unnecessary... (Oh, and thanks Tito, I just pulled my GBA out of a cupboard and checked if my old FFTA save is still alive. It is(!) and reminded me that 130+ hours of my youth went into that game xD

Awesome video tito. They really make good quality stuff

idk the upgraded audio feels a littel too saturated, or maybe it's just an effect of recording the audio through a microphone and actually sounds crisp and clear irl

Love when I get a notification for one of your new videos 💪.... Awesome

your work is art! im super impressed! well done!

Absolutely love the original Game Boy Advance form factor, another great video! For me personally though since I have a steam deck there's really no point in ever doing something like this anymore.

Nice. A lot of this kits play the "preservation" card, but there's almost always a "but". "Oh, you can preserve your old console, but we left out this original functionality, too bad if you wanna use it". This one doesn't sacrifice anything. And I'm glad that there's an option to turn off the LEDs. All this blinking lights make it look like a cheap toy, in my opinion. I wish every RGB component had the option to turn off the LEDs. I don't need my GPU, my fans or my controller to glow.

You forgot to mention that it doesn't support the traditional sleep mode that some games included and instead implements a button combination to enable and disable a hardware sleep mode.

Awesome my dude you have come such a long way ;)

Awesome mod, looks really clean with that mobo and clear shell.

I would love to see a behind-the-scenes about how you do the product shot flyarounds during the intro (not the turntable identity part but like, the bit at 0:40)

Perfect timing, I just ordered this board last week lmao

Been waiting for this!!

What are you preserving if you just have an all brand new gameboy? Its like that mind game, how many boards do you have to replace on the ship, before its no longer the old ship, but a whole new ship? This is basically just a brand new modern gameboy.

@kanesmith8271

Ай бұрын

The CPU/ brain of the original game boy was saved, so it’s like giving it a shiny new ass like Bender the robot than replacing it as a whole system

Hey Tito I just love watching your videos, they inspired me to fix my old consoles and was able from watching your videos to learn how to solder really good! Thank you

That's gorgeous. We're so close to an fpgba. I will buy it the moment they're available.

end look to the device was outstanding.

truth be told I was never that big of a fan of the feel of orginal gba mushy buttons dont feel good to me but this, this is nice

The LED customization instructions are something that I would end up keeping in the battery compartment,,,

@MachoNachoProductions

Ай бұрын

That’s a really good idea. They’re definitely not easy to remember 😅

Amazing content, as always!

@MachoNachoProductions

Ай бұрын

Thank you 🙏

Clear cases are so gorgeous 😮

Always happy to see products like this, great for preservation and while its not the easiest thing to do yourself, with some soldering practice irs definitely doable. Now if only we could get an OLED screen for the GBA and GBA SP. I am loving mine on my GBC.

The single greatest thing about all these projects is the ability to save otherwise dead systems as you said at the beginning. Brilliant stuff from our always amazing community.

I wish you showed in a bit more detail how you got solder onto the pins. Did you add a bit of solder to the soldering iron tip and then spread? or a bit of solder to the first pin? when soldering each of the chips to the new board. Thank you for the rest of the details in this video and all of your videos.

Love that this stuff exists because I’m getting sick of my Analogue Pocket’s horrible dpad.

To be honest I was first worried this was a full emu build, but glad I was proven wrong. Thanks for the chill video. *cheers*

Great video! I'm still hoping for a FPGBA soderless mod lol.

@MachoNachoProductions

Ай бұрын

Me too! I’m sure we’ll see one

For over $200 altogether I'd have liked it to be FGPA to be honest but it's a promising start.

More please. Have you thought about modding a DS XL? Might be fun to show how thats done.

Man, your GBA looks killer! 🤩 The only thing stopping me is the soldering. I know how to solder and do it regularly, but my hands shake like an earthquake doing about 8 on the scale of Richter... I cannot see myself soldering these tiny pins to the board. 😭 Thinking about it... I love my FPGBC! I would absolutely love to see a Funnyplaying FPGBA kit! 😎

@MachoNachoProductions

Ай бұрын

I’m hoping they make one next. Will be a game changer!

Those b-rolls are so cool as always! I wonder if it would be possible to one day to only have to transfer the CPU and use a generic RAM chip.

@MachoNachoProductions

Ай бұрын

I think that would be possible

Saying this looks awesome is an understatement, this is magnificent. After all these years with all these mods, I am gonna have to make one of these gems.

With this colors it would do a fantastic Christmas mod

this is the exact build im after (with different colours.) I should get around to it this year.

Very cool!

Dude always makes soldering look easy. When I do it it does not go this way even with lots of flux.

Thank you for your video 🤩

How much money is it

The production on these videos is off the scale.

If they could figure out how to make space on the PCB to put a controls cheat sheet in silk screen or etched copper, that'd be a good addition. Wouldn't help anyone with an opaque case, but would be a nice extra bonus for the transparent shells. Might also help them make even more transparent shell sales.

And that’s the reason I sold my 101 SP, original gba mods got so good it makes no sense to keep the other ones… the retroid flip also makes gba games look really good and that’s made me play most games there

yeah dude

The content I didn’t know I needed

I love these videos! It makes my day

@MachoNachoProductions

Ай бұрын

I’m so glad! Cheers!

I'd love to see a version of this reverse engineered motherboard that already includes the rechargeable battery board. Yeah, the shell would have to be slightly different to accommodate that, but this one already is, since you don't need to cut it to insert the brand new screen. It makes no sense to build a MODERN GBA and stay stuck in the past using AA batteries.

hey man, love your retro renew videos. can you say what is that lo-fi song that you use? lovin it too :) ❤

I'm trying to save money man stop with the cool gba vids 😆

@MachoNachoProductions

Ай бұрын

Haha, I do apologize 🙏

I'd love one of these :) I unfortunately missed out on the game boy advance era and I do have a retro pie one but sadly it doesn't work and it was put together quite poorly so it's just a desk item but this might be something I could try :)

Tito, as always, great video, I need to catch up with your videos. is this new GBA mother board a 1 for 1 replica that would be compatible with most existing mods such as consolizers?

great video as always.fingers cross funnyplaying make a fpga chip version to go with the fpgbc im having so much fun with!

Did FP fix the audio jack from the motherboard or is it still only outputting mono sound?

Another great video, Tito! Modder question for you, as while I'm not exactly a newbie, I still always struggle with this: Do you have general soldering iron / hot air workstation temps in mind for specific tasks? So, one temp for removing a chip, another for soldering to a ribbon cable, another for, say the big anchor points for the USB ports on a PS4 motherboard? (Had to up the temp on my hot air station for that!) I never know what temp to set my equipment to. I want to get the job done, WITHOUT burning up the board! Even some ballpark starting temps would be helpful! I'm sure I'm not the only modder who could use this!

Such an incredible move forward for GBA preservation! And $60 is a great deal for replacing an irreparable GBA motherboard. Great highlight, Tito.

This is so awesome!!!

The only mod I can think of that I'd like to see added on to help modernize it is a bluetooth chip that's somehow soldered on to switch from the speaker to wireless headphones. For when you're traveling and not looking to bother others, but don't have corded headphones on hand.

Lovely stuff

Broooo, that intro was fkin dope