N42/N46 Compress and remove valve spring without compressed air?
Автокөліктер мен көлік құралдары
You can support my work by ordering the tool on my website:
bimmerzen.com/store
I explain how you can remove valve spring keepers without applying compressed air or without using a rope inside the cylinder to hold the valves in place and prevent them from dropping too low in to the cylinder on the BMW N42/N46 engine.
Check out my DIY guides for more detailed information on how to change valve stem seals:
• BMW N42/N46 Valve Stem...
• BMW E46 N42/N46 Valve ...
Пікірлер: 55
I've done this using the excellent compressor tool from bimmerzen, and soft nylon rope in the combustion chamber. Easy enough! I recommend starting with the piston about half way, stuffing as much rope as possible, then turning the crankshaft until you feel the piston stopping tight against the rope. Doesn't need to get all the way up to TDC. This way the valves didn't drop at all even with very worn seals.
Purchased the tool today! Absolutely awesome! 👍🏻
nice mate, really good info iv always wanted to know, also ur little tool for the chain tension on ur website, thats really smart idea
I need a tool like this for a Polaris RZR There's a company called hotcams that makes valve shim conversion kit Makes it a lot easier to adjust the valves they can sell this tool with the kit People wouldn't have to remove the head
Can you make a valve spring compressor tool for n45 engine? I cant find sny good tool and i need to swap valve stem seal 😢
Hi there just wondering what PSI are you putting in the cylinder to keep the valve up ? Thanks! Learning so much from your videos 🙏🏼
@BimmerZen
Жыл бұрын
1 bar should be enough
Obrigado ! Belo canal , falo do brasil 🇧🇷, poderia mostrar em detalhes como deixar motor n46 no ponto , vou fazer troca retentores na minha 120 2009 , sem ferramentas não tem como deixar no ponto ?
@BimmerZen
Жыл бұрын
Just get the basic N46 timing tools and do this job correctly. Not worth doing it any other way...
I used a byline rope by putting it in the cylinder and turning the crank to compress it with piston that held the valve in place
Hi @BimmerZen, Does this work on an N43 Engine too? I sent some emails to your store email address, not sure if you got them?
I like your video. Can you make a video about installing an oil catch can on N46
@BimmerZen
Жыл бұрын
Thanks, but why would you want to install a catch can on a N46?
@erichu9462
Жыл бұрын
my ccv keeps clogging, i think occ can alleviate that, but i can't find any detail information about installing occ on a n46
@BimmerZen
Жыл бұрын
@@erichu9462 If it keeps clogging then I would suspect something else is wrong... Did you check all the hoses going to the CCV? Sometimes the upper hose that is connected to the intake manifold gets clogged and/or collapses and that prevents proper vacuum to be applied. It's also possible that the drain hose that leads back to the oil dipstick tube and oil pan is clogged. I've never seen or heard of an OCC on an N42/N46:)
Hi. How fast can you ship this to Norway if I place an order now in the web shop? Do you have an express shipment option? Martin
@BimmerZen
7 ай бұрын
Hi! I can ship the tool today, estimated delivery time is 2-3 working days, but it is not guaranteed. I do not have an express option.
Can you make one for a 2011 Nissan armada ????
@BimmerZen
2 ай бұрын
If car God droped that engine in to my garage, yes I would:) But I only work on older BMW's, so the realistic answer is no:/
Hello can you help me with an advice on my n46 b20b knock ..i have a video in my playlist..thx❤
@BimmerZen
Жыл бұрын
did you check if your chain rail guide is broken? you can remove the oil filler cap and try to move the plastic rail from side to side:kzread.info/dash/bejne/c4KLycmSZMLQYLw.html note: moving front to back is normal, side to side not.
@cipriandoxu4382
Жыл бұрын
@@BimmerZen IT is strong not moving
@BimmerZen
Жыл бұрын
@@cipriandoxu4382 Valve cover needs to be removed and components inspected, especially Valvetronic components like intermediate levers and torsion springs.
Does that apply to M52 without compressed air too? Thx
@BimmerZen
Жыл бұрын
I don't know exactly but the principle should be the same.
What a tool!!I want to get the compressor blueprint. where can i get it?
@BimmerZen
Жыл бұрын
I've put the link in the description now...
@raymondprendergast5839
Жыл бұрын
How do I buy the spring compressor , please send me information.
@BimmerZen
Жыл бұрын
@@raymondprendergast5839 Check out my webstore: bimmerzen.com/store
@NewName0
Жыл бұрын
@@BimmerZen do you ship to sweden?
@BimmerZen
Жыл бұрын
@@NewName0 Sure, no problem.
Nice! You've forgot to add link.
@BimmerZen
Жыл бұрын
I've put the link in the description now...
what is the name of this spring press tool. Thank you
@BimmerZen
Жыл бұрын
Check description and you will find a link to my webstore where you can get the tool.
Hi, does it works with N45 engine?
@BimmerZen
10 ай бұрын
contact me via email in my channel description
@andrearemondini1392
10 ай бұрын
I sent you a mail, thanks
@BimmerZen
10 ай бұрын
@@andrearemondini1392 Reply sent
It turns out that the n42 engine is a collision and I've read many posts about it not a collision, but I see that the pistons can hit the valves.
@BimmerZen
Жыл бұрын
When the valves are released, they can drop all the way down and touch the pistons. Otherwise they can only open (drop) as much as the camshaft lobes allow them.
@robertasb4911
Жыл бұрын
Unsure about that, I had timing compoments removed, spun the engine,but nothing was binding, camshafts were still in
@tomekl119
Жыл бұрын
Well they sure can, after you remove the keepers… 😂
@lelekkozje3049
Жыл бұрын
@@tomekl119 a po Polsku?
@robertasb4911
Жыл бұрын
@@tomekl119 what i was saying, cams were not spining while turning crankshaft and nothing was hitting