Pffft. It's awfully presumptuous of you to assume that I'm organized enough to even HAVE drawers...

@shutterbird13

Ай бұрын

🤣🤣

Wow, how fantastically useful (again)! I knew about Gridfinity but not the other 4. The draw dividers and catch-all bins in particular solve storage problems I’ve been needing to address. Mega-thanks!!

@thenextlayer

Жыл бұрын

Glad it was helpful! Enjoy! :)

Thanks for the great promotion! You showed the advantages of my trays that we didn't even realize. Thanks again, HD

Love this channel. All Of your videos are super helpful. I’ve been looking for Something like the organizer without the bases for our kitchen drawers. Thank you!

The Catch All trays are exactly the kind of thing I've been looking for. Thank you!

Oh yes!! I NEED those gardening prints!!

Great video! To the point, not too long, and organized logically.

@thenextlayer

Жыл бұрын

Thanks for the feedback I appreciate it

I love storage solutions - modular storage is a great idea calling it 'customizable' but never has been with an off-the-shelf product. With at home 3D printing, it really has crossed the line to fully customizable. Side note: I totally want to see what you came up with for gardening solutions - I've been diving in to hydroponics and see some opportunities for customize pieces that would help with steps in gardening.

Nice cover on storage solutions! Interested in more for sure. And the gardening prints too. I also frint some of that for indoor.

My new fav content creator man, such great content.

Yes please to gardening prints! Modular seeding trays (10X20s) ... modular cells that are expandable in height ... dibber for those cells/trays?? Great content. Cheers!

Appreciate all of your videos. I have a feeling you’ll be at a few hundred thousand subs in a few months or less. Keep up the great content!

Love the content. I would like to see your gardening prints.

This was really helpful and going to look into the honeycomb wall. So many awkward things to hang. I like the idea of stackable, but if I can't see it, I completely forget about it.

It’s been awesome to watch this channel grow from The original gridfinity stuff. Thank you

Thanks for showing these systems. I really need some for clearing the chaos here 😀

@thenextlayer

Жыл бұрын

EnjoY!

I am excited for the gardening prints ideas... please make more videos about organizing and gardening prints

Yes for more organisation vids please! Gridfinity was my entry to 3D printing but I've been eyeing off that honeycomb wall since day 1. Aaand now I'm frantically scanning my bedroom/office for vertical surfaces I can take over without putting holes in the walls 😅 Current frontrunner is the metal sideplates of my IKEA Fredde desk, which would be super useful for clearing some clutter off the flat surfaces...

@thenextlayer

Жыл бұрын

LOL nice

Thanks for the great video, and yes, I would like to see gardening prints as well. :)

That is some really good advice! Cheers!

A Wonderful video. Accurate lucid & very practical for everyday use. Thanks

@thenextlayer

Жыл бұрын

Glad you think so!

Nice video, awesome to see your channel growing and seeing you reinvest in it. Could you link to the cable organizer you showcased, that looks like a super valuable print!

Sic video🎉, very well done, very helpful, easy to watch 🎉

I've been finding a majority of my prints lately is for organization haha. My desk at work is chaos and I need to get it together before I lose my mind. Thanks for the great video!

@thenextlayer

Жыл бұрын

Same, and thanks :)

another great video thanks. I always wondered if you believed me about the honeycombed wall being wrong way round

This is fantastic! I rarely comment on videos, but I wanted to say yes for more videos like this!!

@thenextlayer

Жыл бұрын

Thanks. More coming soon!!!

Your work is so meticulously put together. You add so much to this community. Thank you for your great content.

@thenextlayer

Жыл бұрын

Wow thank you so much!!

I would love to see garden prints❤love the videos

Thank you so much for sharing! You are the first one who I learned about Bambu X1 Carbon printer from, which is arriving by the end of this week. And - no!!! - I will not hold you responsible is something goes sour with that printer; it was my own choice to buy. 🤣 After watching a few of your videos, starting from "Dear Prusa", which I am absolutely on the same page with you after fighting with the MK3S hot end for a long time, I'm definitely subscribing. 😍

been watching since that first gridfinity video! my first 3D printer is coming soon, and I couldnt be more excited! Also, PLEASE do a gardening 3D prints video

@thenextlayer

Жыл бұрын

You got it, I'll do it :)

Glad to see you're back. This is your channel - do what you do best.

@thenextlayer

Жыл бұрын

Thanks!!! And I will!!! More good stuff coming soon.

I'm enjoying your content, 100% understand wanting to make things shorter and more direct. I'd like to see more content about how to create useful things for people that aren't CAD wizards, not just download it, but how do I go from idea to print, and be cognizant that I'm a full time worker, dad, and have other hobbies. I have to invest so much time in 3dp, sometimes I miss other things. I spend more time calibrating my printers I don't have time to become a cad expert. Not trying to use this comment as therapy, lol. I'm just trying to find a balance. Great content!

Yes! Gardening prints!

Would love to see a video with your gardening prints!

Top video. Anything related to 3D printing and storage has my immediate attention. I have used Alexander Chapel’s (KZreadr) grid-based system extensively and it is fantastic. It’s not free though. Cheers 👍😎🇦🇺

Hi. Great video! Any settings recommendations for the Catch-All Trays to save time and filament while keep the strength?

FANTASTIC overview of the current designs. I am going to make some Catch All Trays /Desk Organizer by HD. I would like to make a shelf with pullout draws that you show at the 12:40 minute marker. Have you made a YT on this item? Thanks David

Good video, but not sure if it's a good or bad thing that it's going to further my addiction to printing out organizational stuff! And yes, please do a video on gardening prints!

@thenextlayer

Жыл бұрын

You and me both!

Your office may still be disorganized, but it would be even worse without the organizational stuff SoonerLater Definitely would like to print some of these to help with my stuff..

Great video! What are the advantages and disadvantages of the honeycomb system compared to the IKEA skadis system?

Great video! As always...

@thenextlayer

Жыл бұрын

THANKS :)

Hey, thanks for the shout out! Spool storage on the HSW FTW! :-)

@thenextlayer

Жыл бұрын

Haha yeah!!

@sez11a

Жыл бұрын

@@thenextlayer Seriously, though, I've had spools up there for about a month, and it hasn't been a problem. My HSW is all one piece: printed on a Tronxy VEHO 600 with a .6 nozzle, I used the OpenSCAD version to generate a gigantic 550x550 HSW.

Awesome ❤ did you make some comparison between honeycomb and multiboard ?

After you pointed me to the Honeycomb wall I printed it out and came to the same realisation about which way round it should be. However I hadn't mounted mine yet 😅

@thenextlayer

Жыл бұрын

Lucky! I have so much work ahead of me

Have you looked at the Multiboard system yet? I'm using Gridfinity for the flat spots, and thinking of going Multiboard for the walls.

Great video! One question, when are you going to print a collapsable office chair? Will that be another great 👍 video?

@JonathanLuker

Жыл бұрын

Any chair is collapsible if you try hard enough, and *every* 3D print is if you *don't* 😉

Yes to both!

@thenextlayer

Жыл бұрын

On it

I definitely need to organize my entire home lol

How do you take one of the existing rectangular gridfinity pieces and make the front edge shorter than the back edge so that the top plain is at an angle toward the user?

gardening prints pls!

You have no idea how glad I am that I am not the only dummy who didn't understand how the honeycomb storage wall boards worked lol

Great videos

@thenextlayer

Жыл бұрын

THANK YOU

I have mounted my honeycomb wall the wrong way round looking at this video but I have not progresses as far as in the video so should be oasy to remove and turn the base over I hope. thanks for the video :O)

I gave the honeycomb wall system a shot, but it has a really horrible bridge for the inserts - how did you overcome this??

1kg filament rolls should hold pretty safe, as long as the honeycomb wall is facing the right way… plus there are supports for those bigger shelves

so print out the walls and stuff on the modular drawer and make a hot gluebase or hot glue fabric or something under them

I love these prints but damn to they take long for in some cases such small parts :D

@thenextlayer

11 ай бұрын

Yeah, true

This 3D stuff is like smoking crack. Thanks for the useful organising info!

@thenextlayer

8 ай бұрын

Glad you enjoyed it!

Have you thought about adding a mod to your gridfinity bins to allow them to be on your honeycomb wall?

@thenextlayer

Жыл бұрын

I have gridfinity on my honeycomb wall?

@ThirdDynamic

Жыл бұрын

@@thenextlayer Oh yeah, the one with magnets.....smh 🤣. Welcome to my week of amazing forgetfulness.

I’ve very new to the printing game, only a few days old. I have an Ender 3 v2 Neo and I’m not sure how to print to hexagon walls on it. It says it can’t slice it cuz it won’t fit. I’m sure it’s just a dumb rookie mistake but I’d love to learn how to make adjustments and figure it out if anyone has any advice? 🤓

Did you have a $200 camera lense sitting on a small shelf with nothing to stop it from rolling off?

Any systems for a pantry with several sizes of cans?

Have you checked out Multiboard? Since you use the HWS I would be interested on your opinion on it. Was about to start printing out a lot of HWS tiles until I saw the Multiboard which includes pegboard holes and seems to be a little stronger. Could you do a comparison video of these two systems?

@JcMinyarro

5 ай бұрын

Would be great to have this comparison video. I am about to print my own "wall organizer" and I think I will go with Multiboard because its community and the "adapters" they are designing for other systems like HWS

Sounds like these all need remixed to add gridfinity support

So how would you convince a Skadis user to switch over toHCW? :-)

Does anyone have info one how much weight (generally) the honeycomb wall can handle? Not as a whole but maybe per item being hung.

@thenextlayer

Жыл бұрын

Depends which hook, materials, etc...

For the honeycomb wall mount - which way am I supposed to print and which way to attach to the wall. It's the notched side that goes against the wall?

@thenextlayer

10 ай бұрын

Fat side down when printing, thin side against the wall

@Leahd_279

10 ай бұрын

@@thenextlayer thank you, once printed that makes much more sense!!

Maybe a silly question, at roughly 2.45 in, what software are you using to show a preview of the stl files, I'm still relatively new to 3d printing and am having to click the stl file to view the part in a slicer, this would save me a lot of time when trying to find the piece I want to print 😊

@thenextlayer

Жыл бұрын

That's Finder on my Mac, it's built in

You know, just when I was "starting" to recover from my gridfinity addiction(ok so I ran out of filament), I see honeycomb now...... need to place an order...

@thenextlayer

Жыл бұрын

HEEEEREEE WE GO

this is crazy

Did you 3D print the supports for your monitor/laptop stand that you moved around 12:40?

@thenextlayer

8 ай бұрын

Nah

RostaP gives a very detailed breakdown of the Honeycomb usage on his printables page. Just fyi.

@thenextlayer

3 ай бұрын

He does now. This video is very old.

I am waiting on my 06 plus

@thenextlayer

Жыл бұрын

Nice, I think you'll like it :)

I tried the drawer organizer and burned a ton of filament for a system that is just too damned confusing and too finicky. Gridfinity just works. The drawer organizer has connector pieces and 'divider' pieces and it's a royal PITA to figure out what you want to do between them. I appreciate the tons of work that went into it... but this could have been much simpler and easier.

I can't keep from staring at the crooked "Socket Wrench" label of your toolbox tho...:)

STL files for resin?

I want to print the drawer organizer but it's too much for me to want to sort through 😂

Hi! Do you know a place to recycle PETG in Israel? I have almost a kilo of prototypes, failed prints, etc.

@thenextlayer

Жыл бұрын

I'm working on a little something something... stay tuned. Keep it.

Shit, now I can't choose which one to use for my drawers

Hello @The Next Layer I love your videos and watching since I have found them first time. It looks like links in description dont work especially under.🛒 RECOMMENDED GEAR: 🛒 Ccould you please take a look on them??

@thenextlayer

Жыл бұрын

Let me check

@Scyfe74

Жыл бұрын

@@thenextlayer they working now tk

I am actually using "fake gridfinity" I call it fake because I modified the openscad file to print bigger bins, 50.6mm, instead of 42.

Veeeerrrryy naaayysss...

Look up how "shadow foam" does it. The point of organization is not only to place small bits in containers but also to see what´s there and what´s missing. Shadow walls are a part of 5S and for mechanics for example it is only important to store stuff but also to make sure everything is back on it´s place and to see right away what´s missing. By stacking 1000 boxes all over the place you don´t get the same organization. I see this frequently with those rainbow colored puke 3D prints, there is no color scheme and not shadow wall it´s still chaos but this time with 1000 boxes instead of 1000 parts. Honestly I don´t see the gritfinity system as a mobile system, I would rather use Kaizen foam instead. It´s way neater and more organized. Now you can do the same with the gridfinity system but I have not really seen somebody do that. 3D peinting nerds tend to be disorganized most times with 785 colored filament for whichever reason and so on. All this is a storage nightmare by itself.

👍🏻

I am a disorganized guy trying to get organized, any help is appreciated.

hello

Hmmm.... X1C, Honeycomb Wall, Magnets... A place for all the tools, hot ends, maybe a build plate or two... If only there was someone that had one and could do an awesome video before I try it. Know anyone who needs to print out a HCW and has an X1 and likes making videos @thenextlayer ? 😎😉

Gardneing prints let's go

@thenextlayer

Жыл бұрын

On it!

Is the Discord server shut down?

@thenextlayer

Жыл бұрын

No…? Https://jle.vi/TNL-discord should work

@jamesshakour9112

Жыл бұрын

@@thenextlayer I kept getting a 404. Works now, sorry for the scare! Love your vids!

Gardening would be cool, it's not something I've seen so much on KZread

Confession: I don't get the gridfinity hype and it uses so so many magnets

@thenextlayer

4 ай бұрын

You don’t need the magnets

@ameliabuns4058

4 ай бұрын

@@thenextlayer ooh I guess that’s true! Maybe I should print a few and see. Filament tho…

Multi board wins

250mm/s bed slinger? No. I'm calling BS on that.

I love you man and i love your content but in your attempt to ennounciate your words more clearly you say almost every other sylable in a different tone and volume from the last and makes its extremely difficult to listen to you sometimes. I hope you don't take this as criticism for criticism sake I'd just prefer if you just talked more plainly and less like you're trying to make a speech at a convention.

@thenextlayer

Жыл бұрын

Thanks for the feedback, part of the problem is teleprompter pacing, so I slow down till it catches up, I'll work on fixing it.

@JonathanLuker

Жыл бұрын

@@thenextlayer I wouldn't worry too much... the commenter may have better speakers or headphones than the rest of us - this ADHD brain noticed, and just thought you were speaking for clarity - tone and volume are texture.

@kerrygallowaynor

Жыл бұрын

@@thenextlayer I would concur that I could stand to hear things a hair less “over enunciated” - but your videos are truly fantastic and I will watch them in whatever form or style you deliver them :D

I am glad you created the honeycombwall community but man some basic common sense shows you that that's backwards.

@thenextlayer

Жыл бұрын

LOL yeah that's fair