Thanks for making this video. Awesome job. Stay safe, and God bless

After four coons I have successfully fleshed one without it looking like a cheese grater. Thanks for the videos, they are extremely helpful!

Thanks for sharing 🇺🇸

Thanks my friend. Awesome setup

Glad to see you really pumping out content again man. You've been a great help to me for many years now. Much appreciated.

@CoonCreekOutdoors

3 жыл бұрын

been putting out 2 videos a week since march.

Cool skinning machine well thought out

A+...Amazing.

This should have WAY more views.

Thanks for the out line of your machine

great video. I just built a skinning machine few weeks ago and used your old video as reference. thank you for sharing

Awesome stuff

Been waiting on this one for years!

The drying / curing boards seen in the background would be a great video!

Thanks for the video. I’ve been piecing together measurements from your old videos and just finished my skinning machine yesterday, peeled the first cat on it this morning. I sent this video to a buddy of mine who started in his machine today.

Great Video!

Great show brother!! Love your attitude Many thanks for all the pointers on foxes god bless have a safe Holiday

Good stuff

That's a very nice set up. Thank you for all the videos

Thank you I'm gonna start building tomorrow!! Merry Christmas and God bless buddy!!

Thank you, great info!

Thanks for Sharing! This was very helpful!

Thank you,,,,I've built a skinning machine from this video. I do appreciate all you do for all of us. I did make a double gambrel instead of two different ones. It has 2 different sets of hooks. 9 -1/2" and 12-1/2 wide . Thanks again...

Been looking forward to this! Thank you!

Great job on the tutorial Stu. Later and thanks for sharing. Merry Christmas

Great video ! Thanks

Awesome update! Have a Merry Christmas Stu 🎄🎅👌

Thanks for the hard earned information! Great full for the amount of videos you’ve been sending us!

As always, Great video! Always very informative! Thanks!

Built 1 like yours last year very similar only it stands alone not bolted to a wall or anything I have the 880 winch and used leaf springs for the top works great thanks to your measurements from the last video.

Great video man! Thanks a lot for that detail. I’ll be building mine real soon !

You earned a subscription fan, this was ingenious! I'd love to see the mobile version to be rolled out / over into the corner

Hey Stu, top notch video quality. You may have answered previously but, I can't seem to find many videos or content on remaking a K9 set after a miss or dug up trap. Your knowledge and experience is greatly appreciated.

Nice !

You should do some deer hunting videos an your equipment you use

looking forward to more fur handling videos

I would love to see a video on how weather effects critter movement

I seen where gfw was buying or looking for some beaver with the cut on top instead of the belly. Ever done one this way? Thoughts?

When I grow up, I’m gonna be just like you.

@willhelphingstine7494

3 жыл бұрын

Keep going

@mikewhitman745

Жыл бұрын

That became way funnier after I read the name...

Thanks pal. Are you thinking about rebuilding the ol gal?

nice video.. had to adjust my machine the other day as the heights in my shed doesnt allow for a full pull on a coyote.. winch is at 7'8" and even by dropping my bottom clamp system it wasnt enough to shuck him out of his jammies,,and then made your gambrel. went with 3/8 cold rolled and welded.. hey Stu can you giver the measurements on each of the pvc fleshing beams? I think I made my yote one a bit too wide..

Great video as always!!! I use clamps attached to a weight at the bottom when I skin yotes. Probably works similar to your old rebar setup. However, I've still ripped a few pelts. Your coyote skinning video doesn't show. Where on the pelt do you clamp?

Can you do a beaver on this setup?

Thank you for the video. I built one based off your original machine. But I used a hand crank boat winch. Now I’m at a new house and will up grade to an electric winch and permanent setup. How many hides have you ripped while winching?

Great setup very through. I guess I need to learn to weld. Love your content Interested in ALUM Tanning and making fur goods . Do you make goods with beaver tail?

What's up

Could I add dead weight to the clamps to add a continuous pull to the skin without damaging it?

Heej, awesome job! I would really like to exchange some info with you or hear your advice. I work with another methots, mostly with alum, or formic acid (no choice the buy those formulas). I am just a beginner. Your skinnig videos helped me a lot, i usually skip the boarding and salting too. After thorough flashing I put my furs right to the alum+salt solution for approx a week. the flash side is white, and after that phase (tanning) i never experienced slippery. however nearly always find some little place with no fur, what can couses that? :? can you tell me your advise the make my work better ? Are those parts, like boarding, salting - 2x driing necesery ? Best regards, a Hunter from EU, Slovakia.

Can you case skin a beaver with that machine?

What should a person just getting into trapping do for stretchers more for fox and coyote.

First!

hey there, how hard was it to weld those vice grips to the metal? I havnt tried it myself but im curious if its just a regular metal

Hi

How tall is the ceiling in your fur shed. Thanks have 8.5 feet to work with. What is the optimal height for pulling?

What county in Illinois do you do the majority of your trapping

You need to get the foot control for your wench. I did and it speeded me up a lot. I have days of 30 or 40 coons and a few yotes on top of that.

what gambrel do you have?

Second 😁👍

I need to learn how to weld!

@CoonCreekOutdoors

3 жыл бұрын

haha. what you need I may know a guy.

@freddyyblock

3 жыл бұрын

Welding tips and tricks really good

Why don’t you make a few to sale,who knows might get you out of the construction business.lol I would buy one and I’m a welder.

come on Stu build another do a vid and give it to one of your followers. or use the new one and give the old one away.

The "old skinning video" and the "machine in action video" in the links in the description both go to the same "air skinning vs. Traditional skinning video. I was wanting to show my brother the original machine in action. Thanks

Can we say a video of your fur right now? Like what you have and how much you have?

What's your name? Not your family name obviously, but your first will do. Great tutorial by the way.

Was that a Amish building you set up ?

I wanna see the stitches

Can you see how many thumbs up I've given? I'm guessing I'll be in the top 3 :)

my got clean all the blood can't believe your wife not upset on that LOL by the way it's gotta stink

bro youtube unsubcribed me from you and some other channels. Great video though

HEY !! GREAT TEACHING VIDEOS! Contact me sometime.. Through the H.S. you went to. Could use some help/info.

How drunk are you that your screaming😭😭😭 good ole natty lights