I'd like to see a shootout between intake systems, FCI vs. Vision Air vs. RP race.

@sarmientomotorsports910

2 ай бұрын

Intake shootout is coming!

Awesome video man!! I actually just ordered a Rossier R5 for my 2020 YFZ switching from my new FMF 4.1 W/ Powerbomb. Can’t wait to see the difference! Thanks for such good videos!!

@sarmientomotorsports910

2 жыл бұрын

That’s awesome man! Great decision! Be ready for the power and torque difference. I have custom maps for the vortex to shoot it to 47hp and 31tq on pump gas, stock motor, big 3.

@Ignacio-uh8hl

Жыл бұрын

@@sarmientomotorsports910 Awesome pure technical info man! thank you!!... Just wonder, I have an 12` YFZ450R (Japan) with a FMF 4.1 with powerbomb since brand new, currently with big 3 and YFZ carb intake cam and a MSD FI. How much I will be gaining (aprox) if I switch for a new full exhaust from RP or Rossier? worth to spend more on it?

Bro i was waiting for that video for very long, now finally i can make a clear decision I’m going with RP thanks 🙏

@sarmientomotorsports910

2 жыл бұрын

Best decision you can make bud!

The best atv content creator!

@sarmientomotorsports910

2 жыл бұрын

Thanks man! I’m doing my best to provide educational information.

great video thank you!

@sarmientomotorsports910

2 жыл бұрын

Thank you man!

I’m curious on what the results would be if they were all perfectly tuned. Also which runs best with some engine work done to it.

hello bro i have quistion witch is best fmf mega bomb or rp shorty for yfz 2018 ?

Definitely Dasa

I'd love to see a video like this for the trx450r.

thoughts on empire exhaust?

is this with stock intake and wothout power commander?

What do you recommend to run on the vortex on a 2024 yfzr se with fuel customs intake and rossier r5 ,ais delete ,speed sensor delete,& a breather box?

Would like to see rossier's new 5.1 on the dyno...bigger core bigger, head pipe..

Great video 🔥👍👍👍👍😮‍💨

YOSHIMURA BEST FITMENT DUAL STOCK MOUNTS USED. NICELY TUCKED INSIDE NOT STICKIN OUT PAST GRAB BAR

What did you end up ay on vortex dials for for the final run on the RP?

Wish you tested a DASA shorty or the regular pipe. Never knew they have a “pro pipe”. I’ll have to check it out

@sarmientomotorsports910

Жыл бұрын

I tested these pipes for sounds, quality and performance. The ama is getting strict on sound which is becoming a big deal. Other times I’ve tested the dasa shorty to the classic and it was no difference

I wonder whta the results are with the yoshimura!!

What about empire and barker exhaust

i have a 2020 yfz450r all stock, i will be getting a fci and vortex but i dont know what exaust to get. what exaust pipe do you recomend for best performance? sound doesnt matter

@sarmientomotorsports910

2 жыл бұрын

Either a RP Race or Rossier

What about Hmf ?

I have a 2023 yfz450r se, i have the fci intake, asi delete, 38 motorsports breather, and rossier r5 exhaust. I want to get the vortex ecu, but was kinda worried about messing up my bike if i set it wrong, do know the best settings for my bikes setup ?

@ptshyu2

Жыл бұрын

You have that without anything to control fuel?

What were the dials at for your best run with the rp? Keep up the great work.

@sarmientomotorsports910

2 жыл бұрын

This was just for a basic operations. All of the exhaust systems need to be fully tuned for best results and healthy engine operation. I’m not promoting the dials because they were all too rich down low and that leads to engine problems.

I just got a new YFZ. I've read that the clutch basket is a ticking time bomb. Is this just for highly modified engines, or will it be fine with just a pipe and Vortex?

@ALDA2479

Жыл бұрын

No it's for stock setups also it's a weak link and definitely the first thing u should address

Any graphs for sparks? What are your thoughts on sparks exhaust?

@sarmientomotorsports910

2 жыл бұрын

They aren’t bad, just out dated. I don’t have any graphs to show because nobody runs them. Still better than FMF and Osh in my opinion.

I have an rp outlaw. Have a dyno video on my page . Would you recommend a different exhaust . Been looking at the Duncan fat boy . I do desert racing around 90-140 miles each race .

@sarmientomotorsports910

2 жыл бұрын

Definitely recommend a full size exhaust system, not a shorty. I recommend the RP 16” or the Rossier R5

Just got my 21 SE back from a place out here in Salam Oregon. R5 FCI and Vortex map 9 and i only did 45/30. A/f was straight as an arrow Tho. Should i be worried about 2 or 3 HP less? Thank you

@sarmientomotorsports910

2 жыл бұрын

Map 9 is for a built engine, not suppose to use it on a stock engine. Maps 1-4 are for stock engines, so yes you should be worried.

@sarmientomotorsports910

2 жыл бұрын

I recommend sending your Vortex in to us for a custom flash tune especially for the R5. I’m getting high 47hp and 31tq on pump gas.

@Fox250R

2 жыл бұрын

@@sarmientomotorsports910 I got my vortex from Duncan racing. So you think I should send it to you?

@sarmientomotorsports910

2 жыл бұрын

@@Fox250R did they put a custom map on it for you? You’re welcome to send it to me for a custom flash tune. Shoot me a message on FB

@Fox250R

2 жыл бұрын

@@sarmientomotorsports910 Nope they used map9 then did the dyno runs. I have a 14 yfz450r that I basically did the exact same thing. I bought that vortex from Duncan as well. Only difference was I wasn’t using a FCI and it did 46 31.

What about a monster exhaust?

The power under the curve is what matters to me. I would have liked to see the fmf on here since it gets so much hate and Yoshi.

@sarmientomotorsports910

2 жыл бұрын

Best I’ve seen with yoshi is 43hp. That’s why I didn’t test one, plus didn’t have one to borrow for this.

@srt4driver181

2 жыл бұрын

@@sarmientomotorsports910 any graphs with a fmf?

@teamwoodswarriorsracing2004

Жыл бұрын

The fmf are horrible, the pipes that chad and Joel run aren't off shelf pipes kinda like the yoshi pipes that joe byrd ran back on 04 to 06 were actually built by Dan lamey of dasa to match his engine kit, the yoshi is a pretty good mid range pipe, bnr motorsports has had great results with them on their xc builds and highly recommend them. I'm sure Ryan can produce some numbers for you, peak numbers aren't always the best thing to be chasing, and thats what most of these pipe manufacturers and engine builders try selling people

@kyleturner528

Жыл бұрын

​@teamwoodswarriorsracing2004 The FMF pipes are not that bad at all. I've got one and dyno numbers were 45.91 HP and 32.23 TQ. Full FMF Power Bomb header, Vortex and lid removed with stock air filter

@teamwoodswarriorsracing2004

Жыл бұрын

@kyle turner that's not good, either.

how loud was the RP? was it close to 96 decimals? would it lose alot of hp with a quiet core?

@sarmientomotorsports910

2 жыл бұрын

It was probably at 96 decimals but it honestly wasn’t that bad

@jodybruce5097

2 жыл бұрын

@@sarmientomotorsports910 ok i was just curious because i ride state land with a 96 decimal noise limit. i am running a yoshi now, do u think its louder than the yoshi steel exhaust?

@sarmientomotorsports910

2 жыл бұрын

@@jodybruce5097 The RP is rated at 98 and you can get the quite core that will drop it down to 94.

@jodybruce5097

Жыл бұрын

@@sarmientomotorsports910 ok great, how much hp would you lose with the quiet core installed?

Is there a reason you didn't test the FMF? I'm new to the YFZ and just assumed it would be in the competition.

@sarmientomotorsports910

Жыл бұрын

The FMF is a good system. But unfortunately it does not deliver the power. It averages about 4-5hp less than these in the videos and it’s one of the most expensive systems so I’d expect it to be better. The last time I dyno tuned one I got 43 wheel hp, new engine, on pump gas. On a built engine I’ve seen 7-10hp just from switching the exhaust.

@vintagetrikesandquads4012

Жыл бұрын

@@sarmientomotorsports910 Thanks for the info. Looks like I'll be going with the RP system then. Crazy to think Chad Wienen would use an exhaust that puts him at such a disadvantage, but maybe his system is custom.

@Fox250R

Жыл бұрын

@@vintagetrikesandquads4012 Haha pro riders could run any exhaust they want it really wouldn’t matter. They run whoever pays them. Simple

@vintagetrikesandquads4012

Жыл бұрын

@@Fox250R I know they get paid but losing 4-5hp to the competition is a big disadvantage, especially at the pro level.

Monster shorty

How much do you charge to tune a vortex for my setup

@sarmientomotorsports910

Жыл бұрын

Send me a message on FB and we can discuss price.

I forgot one more exhaust to include empire exhaust 🥶

5.86 hp gain from dasa , 6.63 hp gain from rp , 5.83 hp gain from the rossier

I have a 2022 Yfz450se I want to make more power with speed with out it lagging factory feels to slow for me what should I grab to make this happen

@Fox250R

Жыл бұрын

Any good exhaust will work tbh just pair it with a Vortex and FCI and you’ll be gtg

@erre6914

Жыл бұрын

Do an 09r clutch basket convert with 09r washer or the stock one WILL BLOW UP RISKING SEVERE ENGINE DAMAGE

Why not test the barkers exhaust?

@mcarbajal5628

Жыл бұрын

Not good enough

@teamwoodswarriorsracing2004

Жыл бұрын

@@mcarbajal5628 haha 😄 you apparently never ran one

@greenwaytruckinginc6134

Жыл бұрын

​@@teamwoodswarriorsracing2004 I don't think they're as good for the 450s as they are the 700s.

@mcarbajal5628

Жыл бұрын

@@teamwoodswarriorsracing2004 I had there ok but there’s better brands now

@teamwoodswarriorsracing2004

Жыл бұрын

@@greenwaytruckinginc6134 they're actually just as good.

this is great factual content men. obviously its better with a tuned vortex. but, would you say you we can start with a RP full system, and upgrade to a vortex in the future? (just starting in the sport) or you would say, RP system without vortex makes no sense? thanks

Over 50% of the pro gncc quads run dasa

Curious where a monster exhaust would land on the shootout.

Any test that doesn't include tuning to a specific AF ratio is a waste if time.

Definitely Rp 🫡💪🏾🔥🔥… Quick question would be the best stage cam to drop in a yfz 450r With only Rp full Exhaust system and Rp intake ,vortex ,45mm throttle body. Would a webcam are hot cam be better? And what stage would be best. Tryna get more top end and mid range