Holy moly! Turbo John's gonna have a racecar with neat, organized wiring! Folks, this is one small step for man and one giant leap for mankind.😄

@pighater951

Ай бұрын

😂😂😂😂

@TurboJohnRacing

Ай бұрын

😂

9:11 Im still impressed by the aarm fab work lol... that freakin wheel was rock steady through all that travel.

@danmyers9372

Ай бұрын

Mike clearly knows what he is doing!

Big Block valve covers look nice!

Or drag n drive Saturn 😮

🎉🎉 LOOKING GOOD BROTHER 💯. I CAN'T SAY IT ENOUGH THE GROUP OF FOLK THAT ARE IN THIS CIRCLE WOW🎉 THANKS FOR THE UPDATE AND GOD BLESS ALL THUMBS 👍

Our Dude has an entire BBC *Behind* the front spindles... Weight percentages are going to be Wild on this car! He will be able to get the percentage he wants without having to add (500lbs in the back like he used to)

@danmyers9372

Ай бұрын

Yep, with that engine placement, a chrome moly double frame rail chassis and the long travel front struts this thing will be a monster on No Prep surfaces!

its looking great!!!!!!!!!!, glad to see yall support St. Jude, Satran would be a good start for a young racer

She looks awesome TJohn!🤩🤩💪💪

Man this is gonna be so nice can't wait to see you out there kicking ass

like seeing a racecar in a neighborhood carport

Gonna be nice car

She’s looking good buddy 👍🏻🔥

Came to your senses🤘🇺🇸

You deserve to have a good car it looks like one thanks for the video

I think whoever buys the Saturn if they did a radial tire setup it would be pretty decent chassis.

Good job

Looking good keep it up 👍👍👍👍

Kelly's shirt is awesome.

I'm just gonna say it. This ain't no junk! Keep it nice!

You should be out testing by the end of July if everything goes to plan!

Looking good! 👍👍

Good luck the Mustang is going to be NICE!!

Thanks for sharing this video with us

Nice!!

Good stuff man

That Big Block looks really nice in there though, and yes that Saturn looked totally different and a nice roller now. I have my Holley Terminator X ECU (for my NHRA Stocker), mounted on a mount and on an electronics board I fabricated & setup, the Main Power Harness, and a Deutch Connector kit on the way (switching out all my existing engine ECM/PM harness/ sensor connections first (and will do a last fire up and verify everything works again, so I have a quick 3 hr. or less emergency switchback to existing as of now starting point option, so if I have a Holley issue (without a spare nearly $800 buck ECU,) and needed to get the car back running overnight at an event, I could just reinstall my existing sensors and plug it all right back in before the next morning and be back racing in an emergency situation). Am currently waiting for a buddy to send me the labeled up unterminated J1A/J1B 15' Harness and wideband O2 Sensor and will begin custom measuring, cutting terminating and wiring it up soon to all the sensors. In the meantime I will install the split Grommet in the firewall and the main power harness, ECU, mounting board, and MSD Solid State Relay. Just taking my time as I have 1 more Summit Bracket night race in mid July at Las Vegas, then nothing until early Sept. (So will bring the car home from Storage in Vegas then to complete the work and wire it real cleanly!) Errr...all labeled clear and concise well run circuits w/ strain reliefs & w/no wire nuts TJ...lol. Lots of well spaced and trimmed heated end (use a bic lighter on the cut ends and just touch the end w/ the 🔥, as it just slightly melts that sharp edge and blunts it smooth and round, hint, a lil' robotics trick), zippy ties. I know you hate wiring so you are doing right to have yours done professionally right, but I love that part of finish detail work myself.

@danmyers9372

Ай бұрын

Do you race in NHRA Division 7 or do you race nostalgia stuff like ANRA?

@TurboJohnRacing

Ай бұрын

Good luck, sounds fun!

Looks awesome 😎

Love ya pal all the best

Be awesome to see ya win DOD in its first race.

So now there's only the 300 small jobs to do.

What kind of times you looking for this setup to run? I’m ready to see it going down the track in competition

👍

Measure up those front tires/wheels those are way out in the front, way in at rear brother, no way tracking correctly. I know you mentioned it in the vid, but easily seen for my OCD.

Do yall ever go to Carolina Dragway to test or race ?? I will be working in Atkin for the next several months and would love to meet yall if yall race there any.

Put twin turbo on it

@danmyers9372

Ай бұрын

I don’t think that is in his budget.

That’s the thing ppl don’t understand unless you raced there is a lot of pushing a car around.

@danmyers9372

Ай бұрын

Really glad they used a car to carefully roll it back down the driveway. His new car would not have looked good halfway through the back wall of the garage! 😬

@TurboJohnRacing

Ай бұрын

LOL, you ain't wrong about that...... Would have made for some good youtube though...lol

How is Brian making out with his shop?

@TurboJohnRacing

Ай бұрын

Making some progress, but things will be a lot different for sure.

Hide the wire nuts and zip ties kelly

Hey there Sir @Turbo John , I just finished watching Gen2Garage. The master cylinder you're using for the Mustang looks like it will work on their newest project. What's the manufacturer's info??

@garylucier6817

Ай бұрын

I thought the very same thing...Get the info on those master cyls. To Jeff, Allison, and Tommy of Gen2Garage TJ.

@garylucier6817

Ай бұрын

It might just clear the turbo setup of their 6 cyl Tornado from Mopar in the duster but they would still need to hack up or cut the left side of the Duster dash. Jeff can clean it up so it is not a hack job finished product (a quick release removable dash corner?) To fill the master cyl., and a re-route of the brake lines through the properly grommeted firewall.

Hey man hook up the Saturn for kelly😮

Scrolled all these comments just to not find a Saturn price 😭

@TurboJohnRacing

Ай бұрын

He wants 18K OBO....... Hope you are doing good bud!

put a big bad rotary in that saturn would fly

@ldnwholesale8552

Ай бұрын

Brap brap brap.

@danmyers9372

Ай бұрын

My ears hurt just thinking about this!

Are you gonna keep the glizzard name?

@TurboJohnRacing

Ай бұрын

No, it has no name

Is the Saturn still for sale?

@TurboJohnRacing

Ай бұрын

Yes, he still has it for sale.

@MouseMotorsports

Ай бұрын

@@TurboJohnRacing how much does he want for it?

@MouseMotorsports

Ай бұрын

Or who do I need to talk to to find out about it

@TurboJohnRacing

Ай бұрын

@@MouseMotorsports was asking 18, but it may be negotiable.

THANK YOU. I stopped watchin/paying attention once I seen that monstrosity💯