I just installed the Voswitch on my JKU a few days ago. Love it so far. I have my lights, on board water, air, etc and it’s flawless so far

I love the field of vision comment with that huge crack across the glass.

@bleepinjeep

4 жыл бұрын

It's a neverending battle

@TheDanguruss

4 жыл бұрын

@@bleepinjeep Lite-Brite has a window for it on one of their videos

Thank you for videos like this. We’d been procrastinating on this one because we weren’t sure on how we wanted to route the wires. We have a different switch pod, but really similar to this one. Never even crossed our minds to run it under the windshield. It’s the little tips like this that make your vids so helpful. Your steer smarts vid for example highlighted a bracket I didn’t know I needed bc it wasn’t mentioned on the website. So thank you for being so detailed.

I remember the old one you made. I always imagined making one out of a module controller for a boat (marine application) and just using it for the truck. This looks a lot nicer for a car than a marine one would look. Thanks for the in depth video!

Gotta love these great cheaper options! Between this or the homebrew option I can actually set something up. Instead of longingly staring at the expensive stuff lol

That is very cool and would make a huge difference for me on the added lights and other electrical accessories I have installed in my JL. You have done some great videos that I have used for items on my 03 Rubicon!

I installed one these bad boys in my JK about 3 months and I've gone Jeepin in mud, rivers and lots of snow and its held up very well! Its nice not using those little red light switches cause after 6 pairs of lights it begins to get messy. For me, it was a very wise investment and parts are good quality.

I just ordered and bought my first ever Jeep. A 2021 JL Jeep Wrangler Unlimited Rubicon. So far I totally love it! I bought my Rubicon with the 4 aux switched from the factory but they are not enough so I am going to have to look into getting one of these for my Rubicon. Thank you for the video! I’m now a new subscriber to the channel.

Very similiar to the flexible, programmable "sticky" pad product that went out of business in '13/'14. Except their product was just the switch pad and not the entire kit iirc. Programmable switches is a slick idea that's got the "cool factor" but can also be very useful. Not a bad price either, especially considering it's a complete plug and play kit. Thanks Matt. I wouldn't have known about this if you hadn't done the install.👍

I was just looking at these! Very timely video Matt!

@Flynway2low

4 жыл бұрын

Do you know if there are still available for sale somewhere. Can't find the one he has in the video anywhere. Thanks

I have the 8 switch vospod! Love it... good choice

That's so bad ass . Been looking into getting one of these. Great video again Matt , thank you for sharing.

This is EXACTLY what I'm looking for. Great video. I buy my electrical connections in bulk, as I put things back together in the wrong order all the time.

I was just looking a an sPOD too! Very timely video. Thanks!

Thanks for the video. Installing a ARB compressor for front and rear lockers and now looking for auxiliary switch options .

Thank you so much. I bought that same kit for my JK, I haven't installed it yet. I didn't have the option to change it to a JK so I bought the JL kit. Made a few adjustments on the mount

@White_Trash_JKU

3 жыл бұрын

I was wondering if this would work properly on a JK. Thought about buying one for my JK

Thank you for this video! Just ordered one for my 2015 Grand Cherokee Overland.

Love it. It would look great in my Jeep. Thanks for all the great content and cool gadgets.

We installed one in our JL today. Couldn’t be easier. Thanks.

I tried out the rough country one. It's been going great for me so far.

Great video thank you. Just ordered mine but will install through firewall to the a pillar and mount to my CMM ball mount. 👍🏽

My new favorite channel. February 13th 2020.

Clean look and interesting mounting location in the JL!

Engine compartment is SO CLEAN!

Would be a nice addition to the parts I’ve been stockpiling while trying to find a proper jeep to build.

That looks like the JL version of the Appolotech, I have it for the JK and absolutely love it.

Matt, you are truly the Mister Rogers of Jeeps. That is in no way an insult, as Mister Rogers showed me the world as a child, you're showing me everything Jeep as an adult:)

I have been an avid Squatcher my whole life. That new JL in panel unit would help me find one for sure!!! 😁🤪

You the man! Nice, clean install.

These things are pretty cool, heres the Amazon links: $249.00 New in Dash JL: amzn.to/3gZs4zr $269.00 New JK Switch Panel: amzn.to/3gW0q6r $279.00 VoSwitch JL: amzn.to/2SGBfKF $179.00 VoSwitch JK: amzn.to/2SMGtEy $269.00 VoSwitch Universal: amzn.to/30fYIWR

This would be perfect for my zj! Just what I need for my accessories

This is pretty cool relay kit. Would be good for my Tacoma. Love the channel. Looking for another 79 bronco like I had in college. Could work for that as well.

Nice to see an alternative to the sPOD. Thanks for all the great videos

@bleepinjeep

4 жыл бұрын

I'm sure the spod is great quality but man its soo expensive!

@clintlasher8436

4 жыл бұрын

BleepinJeep I concur

JUST ORDERED FOR MY GLADIATOR, THANKS FOR THE VIDEO.

Thanks for the video Matt !

I’m still running stock lighting on everything on the XJ. Looking to start upgrading and would love to have this!

Would solve my switch situation! Thanks for the chance!

This would be real nice on my ZJ build. Keep up the good work.

This is the exact one I'll be getting. I was wondering if there was a review of it. Thanks

Definitely wanting to get one for my tj since seeing this vid earlier this year.

Can’t wait to see how it holds up... may be on my short list if it is reliable

@crashtke

2 жыл бұрын

Seems like that is the key. Every one of these I see has issues in the reviews over time. Some sooner than others.

Installed one of their 6 rocker kits in out F550 Type 6 fire truck to control all the scene lights and emergency lights.... Great product and happy with it so far. and was on $160 for the basic over the mirror 6 rocker kit. Not sure if they have it for the JL but they also have a Pillar POD using the button panel seen in this video.

Love seeing your videos in my feed

@bleepinjeep

4 жыл бұрын

Thanks!

This guy is the Mr. Rogers of overlanding.

Good looking install!

Nice unit. I’ll be getting one for the LJ.

Awsome videos 👍🏼👍🏼 Keep'em coming.

This would be perfect for my XJ or Crosstrek! 🤞🏼

I like the strobe n flash features

Very cool. Keep up the great videos

Very helpful video. Thanks!

I think I need one of these ASAP!

Need this for my e lockers 🤘👌

as a note: you can run the wire in through a smaller hole in the plastic if you route the wire through before you crimp it to the fuse holder and terminal. you should finish by sealing each hole with RTV or some similar sealant to keep water out of your fuse panel and relay box. can not say I care much for the strobe effects, but I may have to look into the universal version for my Tacoma. sPods are seriously over price for being an over glorified fuse box and switch bank

Man that looks pretty sweet.

Would definitely appreciate one of these once I finally get some lights on my JK. Lol

Need this for my xj. Good luck everyone

This will be sweet in my crawler.

I still have my old repurposed OEM relay center in my XJ for all my aftermarket gear. If I had it to do over I would definitely just buy something like this. Much easier.

The ball and socket mounts are "RAM MOUNTS", you can find all kinds of accessories on Amazon to extend the mounts out farther. I use these on my UTV to mount Go Pro's, and on my motorcycle for my phone mount (just like you have) and GPS mount. I love them.

@Issac_G

4 жыл бұрын

Knock off RAM mounts

Love it. Would look great in my rig.

Hey Matt, very cool. Am building a full size Bronco, or just put it in my 1st Generation 4runner! Hope it would fit it! Thanks!

Great job, Matt.

@wbball15

4 жыл бұрын

Don't you sleep, Matt?

Excellent content

Would love one for my custom dash setup in my ZJ with an 8" tablet/ radio delete, hidden CB and VHF radios, etc!

Great video!

And another great video :D

Great video thanks

You should set up in and out for your winch in the cab on the momentary setting! Enjoyed the video as always.

@bleepinjeep

4 жыл бұрын

That would be pretty cool

Instills great confidence 30 seconds in...lol...great vid

@8:24 when you crimped your wire, I heard your knuckles crack, LOL happens every time to me!

Nice switch

I could definitely use one of these for my JK

Great review. Thumbs up 4 sure.

That would be really cool in my old Cj

Neat solution. Prefer doing my own switchplates with vandals and a relay box, but if I wanted an easier answer, that would be a sweet setup.

@bleepinjeep

4 жыл бұрын

It was a pretty simple plug and play install.

After pulling those plugs and putting the wire through you should rtv the hole to seal it. Those are there to help water sealant.

Great videos thank you

great video.

Very nice!

Been looking at these units myself, wondering if a guy could use it for in cab winch controls. One switch for winch power and 2 set as momentary switches for winch in/out

Thanks for the great video. Can the switches be placed in a place other than the top of the dash? Thanks!

Want one of these for my JKU!!!

Would love to have one for my Jeep

I want one of those! But it may be a bit fancy in my dirty YJ 🤣!

Hi first of all great video Second I have suzuki samurai you think what you install will be good for the samurai?

so i bought this and love it. im looking to get pod lights with two colors, white and amber. how would i make this work with the voswitch switch module? i know the pod lights come with their own clicky switch which you use to cycle thru the different modes?

I'll love to win one, great stuff

Sweeeeeettttt! Definitely getting one.

great link to the switches LOL

G'day big boy, saw one of these online recently, do you know the measurements of the in-cab dock? Looking to put this in an existing hole :)

Thats nifty, but Im old school. I like the Carling rocker switches better.

@MrMrsregor

4 жыл бұрын

@@law1143 and half the price

@victorlv4479

4 жыл бұрын

this is the rocker switch version for Jeep JL , www.amazon.com/dp/B07XSZPXGZ it will be what you want.

@macbook802

4 жыл бұрын

I'm really old school, I like twisting wires together when I need the function activated

Hey Matt! So stupid question. I went on Amazon on the link you thankfully left and that kit is not available. Do you think the JK kit can work?

Chrisfix sent me here. And I'm a Jeep guy so win/win

i guess your came in perfect condition when i got mine was defected and had to return it....

This would be great for my 96 xj

wonder how much MORE it will leak? lol, just kiddin.i have a 99 tj.how do u stop the water in the door panels.i have new top but water always get in bottom of window down where it meets door.gonna get rusty soon.any ideas? cant really tell where it comes in.maybe zippers? thanks.great stuff always

I put a JK rocker switch set up in my XJ for about 120$, complete plug and play with a volt meter

@aaronortiz99

2 жыл бұрын

Sounds interesting which one and where did you mount it?

I have the voswitch panel and it has like 3 strobe settings while most videos I seen have 5 or 6

I only have 1 pre ran aux switch wire in my cargo area. If I have one of these type of s pod controllers then could I have the lights use multiple buttons to control multiple lights without having multiple wires?