You're something rare these days in PC community. Straight to the points & no show off / cringy unrelated topics. Thank you so much for the help !

@BuildPicker

2 жыл бұрын

I think most people call it 'boring'... Haha.

@JudgeCastle

2 жыл бұрын

@@BuildPicker This is exactly what I was looking for as someone who was looking at this board for a new build. Thank you.

@neilwilkins9002

Жыл бұрын

I'd agree so much information to decipher a straight to the point honest round up helps. I'm now looking hard at this...thanks

@tech450

Жыл бұрын

​@@BuildPicker can I pair 12700F ? With this motherboard?

Great video. Really appreciate the comparisons at the end.

I looked into the other motherboards and ended up buying the Tomahawk and I have no regrets, its an amazing motherboard and easy use and worked out of the box

@franciscobriceno3059

2 жыл бұрын

I bought it with a 12700k and 3080, just hoping it can handle this circuit flow

@rawgov

2 жыл бұрын

Do you have any issues with the ALC4080? Lots of people have expressed frustrations with it?

@samuraiwarrior96

2 жыл бұрын

hi tell me more about it plz im in dilemma

@rawgov

2 жыл бұрын

@@samuraiwarrior96 Hi, I got this same motherboard and have been using it for a few days. Everything has been great. No complaints regarding the audio stuff. I was also worried in the beginning but it's all good.

@samuraiwarrior96

2 жыл бұрын

@@rawgov hows the game peformance and vrm stuffs

Everything in this video was perfect ! ❤ Liked and subscribed. Awesome content .

fantastic review! I might get this board just because I like how it looks. Most of it is black and doesn't any bright white logos or annoyingly obvious designs on the vrms that might stick out in an other all black build.

Thanks for the vid. The edge here in Aus is + $170 So I am going to buy the Tomahawk for my i5 build. SUB'ed

Great review… thank you!

Very thoughtful and well done review. I appreciate your level of detail. I am still deciding between this, the Rog Strix Z690 D4, and the MSI EDGE (Mostly because I like the colorful dragon, lol). I'm leaning towards the Edge, but it would be my first MSI board. I'm very used to Asus which makes me consider the strix. The Gigabyte Aorus Elite looks like a great board on paper, it's reliability really worries me. Too many horror stories.

@Games_and_Tech

2 жыл бұрын

I have had plenty msi boards with pretty good experience. Now I'm looking to the z690 strix d4 because it has a white version... but not sure about it

Great review thanks. I bought this board last week for my new build so its good to hear i've made a pretty good choice. I was going to go i9 but decided on the i7 as it'll do everything I need it to do pretty well. (Subscribed)

@BuildPicker

2 жыл бұрын

Hey thanks for the sub! Yep, it's pretty spot on and great for the i7. Likewise, the i7 is such a powerhouse it's hard to justify $200 more for the i9. It'll be a great PC, enjoy!

@hoknm6409

2 жыл бұрын

Hi Some questions. What you think about Cooling the vram Do it's Good for overclock i7-12700k to 4.9ghz or 5ghz? And How hot is your processor under pressure?

@treyquattro

2 жыл бұрын

I'm in the same situation: playing off i9 v i7 and z690 v b660 (or h670). I'm not planning on overclocking or gaming. It's a pity there are no non-k 12th gen parts available now. I guess Intel are going to force us all to pay a premium until demands drops

@BuildPicker

2 жыл бұрын

@@hoknm6409 Yes, it'll happily hit 5.0GHz all core on an i7 (mine has) but it's more down to the CPU quality and Cooler capacity at that point. I'm getting numbers on i7 K CPU temperatures to act as a guide for coolers in an upcoming video.

Nice video,to the point,very usefull.

Nice review. I am switching my 5950x for a 12900k and it has been hard to find a MoBo with the characteristics tha I have on my meg ace x570 in a z690 board with ddr4 support

Thanks for your review

Good review mate, thank you

@BuildPicker

2 жыл бұрын

No worries. Let us know if there's stuff you'd like to see covered in otehr reviews and we can work on that!

Great content fella...thanks muchly. A review on the Asus TUF GAMING Z690-PLUS WIFI D4 would be great please. Cheers and keep up the good work.

@BuildPicker

2 жыл бұрын

Thanks! Looking at the spec of the board... It's a Z690 A-Pro with some slight cosmetic tweaks. It's not the best specced of boards at $280, I'd take the MSI Tomahawk over it. So it just depends on pricing. Worth $250 though. (if you're in the UK they're both £250 and the Tomahawk is the better board at the money)

@feanornoldor4919

2 жыл бұрын

Thanks for the advice mate, I'll keep an eye on prices.

Got the z690 for ddr5. Cheap yet awesome board with lots of feutures. Do need to flash the bios to the newest via USB if you wanna use it directly with a 13 series chipset from intel. I got a CPU and GPU error led on the board. Flashing the bios solved all. Works lovely with my 3090, 13900kf and 32gb of 6000 mhz ddr5. Absolute beast that’s fast as fudge

@rjbjr

Жыл бұрын

What bios number did you flash?

Great job you are great keep it up

Bought the MSI B660 Tomahawk DDR4 for the 12700k i got on sale. Runs exceptionally great

@TheR1sh

Жыл бұрын

why did you buy b660 chipset for 12700k ?

@juniorthomas6404

Жыл бұрын

@@TheR1sh was the best for the price.

I’m going from a b660 tomahawk to z690 tomahawk for my 13600k and 3070 great experience with the b series now to see how z differs

I like to increase power limits to the max. Now we’re running at max performance without an overclock.

any suggestion to use on the Z690 Tomahawk WiFi DDR4 Gaming Motherboard referring Best Ram ? any tips an, any tips you got? Thank you👍🏻 Also Great Video to "BuildPicker" wait a minute no to to configure anything an is TPM in Bios to install windows 11 Nor An NVMe Drive? so the motherboard will congiure it all out on its own? also used Asus a lot, but found MSI to have the more user friendly Bios Menu from videos seen...

Are the vrms on this board any good? i've heard stories about msi using the cheapest materials and having a bad rep cuz of that.Is it true? ps : great review

@BuildPicker

2 жыл бұрын

No, it's not true. This board has a strong 16 Phase 70Amp VRM for CPU Core. Z690 across the range (apart from the cheapest ASrock) has good VRMs that can handle an i7-12700K no issues and a i9-12900K at stock too. The only time you'd need to consider VRM quality if is you're aiming to push a 12900K as far as it will go!

Updating my rig and my last purchase is a motherboard. Newegg has this rather cheap for $170 compared to $250 on Amazon, Microcenter & Best Buy. My price point was around $200-240 and considering a Giga UD or X but still conflicted as this one seems perfectly fine.

@BuildPicker

Жыл бұрын

This is better than either of those, go for it at that price.

@orion1204

Жыл бұрын

Well that seals it. Thank you!

Thanks for the review. Given the price difference between the MSI Z690 Tomahawk DDR4 and MSI B660 Tomahawk DDR4 is at time of writing not much, which should I go for when using an Intel 12400F CPU? I understand that the CPU can't be overclocked, and that might imply using the B660 board; but (as the price difference is between the boards is slight), might it not be better to take the MSI Z690 Tomahawk DDR4? For one thing, it offers an upgrade path to K-series processors, and other features, like more M.2 slots.

@BuildPicker

2 жыл бұрын

Yep, if they're that similar and it's a price you can bear to pay, the Z690 is the stronger board. As you say, the option to get a used i7-12700K in a couple of years may be attractive - though a B660 would actually take that CPU fine, except the locked off overclocking.

@t5kcannon1

2 жыл бұрын

@@BuildPicker Thanks for the advice. Best luck for the channel; it's really good and deserves a lot more attention.

Wow thank you

my cpu is i77200k for got to mention for clock speeds fsx and fs2020 gpu is rtx 2030 nice set up

Hi, could you kindly provide any hints about why the m.2_2 slot on the edge version of this board doesn't get recognised? The ssd otherwise works elsewhere. The sata ports are also not detecting extra ssds.

@BuildPicker

2 жыл бұрын

All M.2 slots should work on the Z690 Edge. There are no conflicts with M.2 slots or Sata slots. If it's a SATA (not PCIe) M.2 SSD, then it won't work in that slot as it's PCIe only. All SATA ports should work - are drives visible in BIOS? Have you also connected SATA power to them (2 cables to the drive)? Do they just need to be initialized in Windows? When in doubt, try a BIOS update. If you're not seeing drives no matter which socket they're in and when you're sure they're correctly connected, then contact the retailer.

Thank you.

Was going back and forth between this and the gaming edge but prime day just gave me a great discount so tomahawk wins

To those who have this board, are you facing some issues regarding the audio from the ALC4080 chipset? I keep hearing about how this audio chip across all brands of motherboards comes with some known issues - hissing noise in audio out, crackle, pop noises, sudden static (by far the most scary!), muffled output etc. I love everything else about this board, but the issues surrounding this audio codec is particularly worrisome.

@BuildPicker

2 жыл бұрын

I've used the ALC 4080 on 3 Boards now, the Asus Z690 Maximus XIII, this board, and the MSI Z690 Carbon (currently in daily use). I haven't experienced these issues though headphones or speakers via USB, Audio jack or optical connection... I have heard of some boards suffering this but I don't think it's necessarily a problem with the chip itself.

Nice review though please what are the best DDR4 3600Mhz 32Gb kits for this motherboard, preferably non RGB? Which kits use BDie and are BDie chips the best for Alderlake?

@BuildPicker

2 жыл бұрын

Hi there! You can check out our video on best DDR4 RAM for Alder lake if you like ;) However if you're in a hurry, the best bang for buck comes from 32GB 3600Mhz Cl16 kits from Crucial (Ballistix) or G.Skill (Ripjws V). There's also some nice Crucial Ballistix Max Kits at 16GB 4000Mhz Cl18, and you could get 2 of those and run 4 sticks - though I can't be 100% certain the Memory controller will do gear 1 at those speeds with 4 sticks. B-die is good on most platforms but it's usually expensive and not really necessary unless your'e going to get deep into overclocking. Hope that helps!

@Skyabovetheground

2 жыл бұрын

@@BuildPicker would you recommend the Corsair avegance pro or dominator Ddr4 32gb 3600mhz for this motherboard or the msi z690 edge ? Thanks

What difference do the audio encoders make for gaming? I would be interested in hearing protection features, but if its just for audiophiles, I will stick to the cheaper board.

@BuildPicker

2 жыл бұрын

For general use, not much. I have experienced some noise on the ALC897, but that's really because it's normally found on (much) cheaper boards, down around the $100 range, so they're probably not built with the same sound isolation consideration as more expensive options. It's just a shame to see that one budget part on a $220 Motherboard like the MSI Z690-A Pro. It'll likely be fine, for gaming and general use. If you're gonig to buy nice headphones or speakers, I'd get at least an ALC1220 equipped board. Most Z690's have ALC1220 or ALC4080.

@gen-X-trader

2 жыл бұрын

You're better off getting a dedicated sound card if you're running a higher-end amplifier and separates. None of the audio outputs on any of the motherboards including the $700 ones are going to come close to something like an EVGA sound card. The high-end motherboards like the Asus hero are seriously not worth it this time around. This board right here is the one to get. The extra $400 for something like a hero, maybe you get another .1mhz overclock and slightly better stability but is that really worth $400?

What do you recommend for 12600k and ddr4, that wouldn't break the bank? I'm struggling between Tomahawk or Pro A, TUF z690 plus.

@FluffyBit

2 жыл бұрын

B660 tomahawk

Hi im considering getting this board along (debating between this one and the edge) with a 12700k and a Rog 3080 10gb, I got 16gb C18 3600 DDR4, would a kraken z53 dual fan be enough to keep it from overheating or should i consider a 360mm? Case is msi velox airflow, great review!

@BuildPicker

Жыл бұрын

A 240mm is sufficient for a 12700K, a 280 or 360mm radiator gives a little more headroom. However you can under volt to dramatically reduce power use and temperature too!

@ShellShokerPT

Жыл бұрын

@@BuildPicker thanks for the reply, I considered this one because it's the cheapest I could find with temp display panel, people told me in forums to consider liqmax instead

A minor remark: the ASUS Tuf Gaming Z690 has 4 chassis fan headers, not 3.

Thanks for all the info: It looks like you cannot choose GPU temperature as source for fan control (e.g. for PC case) in the MSI Z690 Tomahawk?

@BuildPicker

2 жыл бұрын

No, the GPU doesn't passTemperatures back to the BIOS at that level, you can only see them in the operating system. Some GPUs (like EVGA FTW3) have their own fan header, to control an external case fan themselves, or else I think 'Fan control' can use GPU temperatures to control Case fans from GPU temperatures.

@BeachClub_1

2 жыл бұрын

@@BuildPicker Thanks for the swift reply. Yes Fan Control can use GPU temperatures. I tested it. However I saw on youtube that Gigabyte mobos can use GPU temperatures as source for any fan control in Bios. Did you have a GPU in the motherboard during review?

@BuildPicker

2 жыл бұрын

@@BeachClub_1 yes I've used this board with an evga 3080 and 3080ti and zotac 3060ti. I tend to keep additional applications to a minimum whilst testing for sake of consistency though.

Another question: Can Wifi and bluetooth be disabled/enabled separately in Bios? Thanks

@alexandernazarov7636

2 жыл бұрын

no

Hello ! Just to be sure, i got a M2 4.0 for my OS, I should use it on M2_1 slot for the best performance right ? What does "M2_1 from CPU" mean?

@BuildPicker

2 жыл бұрын

Yes, it goes in M.2_1. It's directly connected to the CPU others go via the chipset. In reality there's not going to be a noticeable difference in performance, but m.2_1 is 'optimal'.

ok so which 1 is it? ddr 4 or 5? i see 2 identical pcbs on amazon one says ddr 5 one says dd4, the oficial msi webside says MSI MAG Z690 Tomahawk WiFi Gaming Motherboard supports ddr 5 up to 6400 speeds

I was 99% set on the Tomahawk board before you mentioned the Edge. Do you think its worth the extra £40 over the Tomahawk(£239) will be using an i512400, or would the B660 Tomahawk be better for £180. Thanks for all the good reviews.

@BuildPicker

Жыл бұрын

Sorry for the delay. If you're set on a Z690 I'd stick with the tomahawk. Or, look at the b660 tomahawk/mortar for the i5-2400

I’ve got 2x8gb Corsair vengeance 3200 cl16 in this board, will adding two more of the same sticks be fine, I’m not sure if this board or the sticks are dual rank/single rank or whatever?

@BuildPicker

Жыл бұрын

It should be fine. At 3200MHz you have headroom and won't need to increase voltages or anything. Install them and ensure you turn xmp back on!

@heroicsquirrel3195

Жыл бұрын

@@BuildPicker thanks, I was worried about losing performance

yes, very informative and well presented. Thumb & sub from me

hello i would like the clocking speeds for fsx and fs2020 i have this board lovley how do i set this up for best perforamce in both sims pleas

@BuildPicker

3 ай бұрын

Honestly it will do just fine out of the box. Main thing is to make sure it will boot to full power which relies on your PL1 and PL2 settings, and adequate cooling on the CPU.

Hey, I'm planning to buy 13600K. Now the prices of z690 motherboards reduced in general, which z690 board under $200 would you suggest ? Reliability would be my first priority, I don't upgrade often, my current build has i5 4690, so motherboard reliability is must for me.

@denx5377

Жыл бұрын

Which one did you choose? I also bought the 13600k and thinking about getting the tomahawk

@VeniVidiAjax

Жыл бұрын

Make sure to update the mobo bios first before starting the thing. Most z690 aren’t compatible with the 13 series intel chips. After a bios update / flash they are.

Does it support i5 13600k ? I mean it says it supports 12 gen CPU but the said one is 13 th gen

One question. For the same CPU you've used, can it work with a single 8 pin connector from PSU? The motherboard has 2.

@BuildPicker

2 жыл бұрын

Yes it can. The single 8 pin can supply well over 200W of power (235W continuous) so it's fine for a stock i7 or even i9. Multiple power inputs are only required for extreme overclocking. It's marketing, really.

@Plataeplomo

2 жыл бұрын

@@BuildPicker I was freaking out man, thanks for saving my time, and brain cells. lol.

Just to make sure I didn't overlook something on the online specs, does the mobo have the one m.2 slot as NVME for using it as a boot-up drive? Not seeing it on the specs, so watching some videos to see if someone covers that...thanks

@BuildPicker

Жыл бұрын

It can take 4 m.2 drives and all can be used as a boot drive! Hope that helps.

@garyc5245

Жыл бұрын

@@BuildPicker Thanks for the fast reply I appreciate it

Hi Some questions. What you think about the vram in this motherboard Do it's Good for overclock i7-12700k to 4.9ghz or 5ghz?

@alexiszurex

2 жыл бұрын

6:19 listen carefully

@hoknm6409

2 жыл бұрын

@@alexiszurex thank you sir Last thing Z690 arous elite ax ddr4 good for i7-12700k with overclock to 5ghz without any problem with the motherboard and without vram problem with the heat

@alexiszurex

2 жыл бұрын

@@hoknm6409 i got some choice problem.... Asus ROG Strix Z690-A Gaming WiFi D4 vs MSI MAG Z690 Tomahawk WiFi DDR4 what u prefer ???

@hoknm6409

2 жыл бұрын

@@alexiszurex the white version from asus?

does this board have a temp. sensor on the pciex16? I didnt see it when you went in the bios on the fans.

@BuildPicker

2 жыл бұрын

It has 3 temp sensor sources: CPU, 'System' and Chipset. System is normally located somewhat close to the main PCIe Slot, but I'm not sure in this instance and can't find any reference to it in MSI's documents. You can always keep an eye on reported temperatures on that source, and see if it scales appropriately to what you want to control from it.

@Daisudori

2 жыл бұрын

@@BuildPicker Thanks for answering! Normally Its Asus with the lack of sensors, I hope MSI doesnt start following suit.

I notice there’s two 8pin for the cpu power. Should you use both and if so why when it works when you use one

@BuildPicker

2 жыл бұрын

One 8 Pin plug is rated for 235W continuous, which is within the limit for even an i7-12700K. however, to support overclocking (and for marketing) Motherboard manufacturers now include 8+4 or 8+8 connectors on most boards, to double that for nearly 500W capacity. The connectors are directly wired to each other on the board, so one plug works the same as two. I only had one plug in during this review just to get the board up and working for the video. All testing was done with both connected - but it doesn't make a difference.

@miltona891

2 жыл бұрын

@@BuildPicker perfect I appreciate the break down. So if I have the connection on my power supply should I just connect it or just leave it with one. What you suggest

@BuildPicker

2 жыл бұрын

@@miltona891 If you have both, connect both. If you only have one 8 pin, that's fine.

Will this board run an i7k with noctua d15 and keep it under 85 degrees during a stress test for thirty minutes stock?

@BuildPicker

2 жыл бұрын

That will depend on the case airflow. It reaches about 82C steady state with a D15S, but that is on a test bench. So long as you have good airflow in the case it should be possible to maintain 85C. This board behaves as it should with respect to power limits so it will be the same as anything else.

@usparktalk

2 жыл бұрын

@@BuildPicker thanks!

Who's got the background 'processing noise' issues when playing games ? I've seen a lot of talk saying its the realtek 4080 chipset that's the problem bbut I get the same issue using nvidias audio over displayport. Really bugging me !

@BuildPicker

2 жыл бұрын

I've got three boards with the 4080 chipset, it's not something I've noticed. I'll check it out though. When do you notice it worse? What output are you using?

@GranulatedStuff

2 жыл бұрын

@@BuildPicker Cheers for the response. It presents itself from any audio output. The mobo line-out and (bizarrely) also when I tried using the nvidia audio via displayport output from my 3070ti. My monitors are studio actives which can produce frequencies upto 22k via their ribbon tweeters. Some grounding issue I'm assuming.

Can someone please suggests a good 80+ gold semi modular 750W power supply to go along with MSI Z690 Tomahawk DDR4 + i5-12600K + 2x16 GB DDR 3600 CL16 RAM + 3060 TI OC Edition GPU + 2 x M.2 NVMe SSD's . Also should a 750W PSU be enough ? I am really looking for a rock stable no fuss psu.

@BuildPicker

2 жыл бұрын

650W will be fine. MSI A-GF, enermax revolution DF, or if you can get a discounted Corsiar RMx (2018) they're good cost effective options.

@sanketss84

2 жыл бұрын

@@BuildPicker how is the ASUS ROG STRIX 750 or the Corsair RM750 as others are not available readily.

:wakes up: Whoa I just had a dream that someone actually reviewed a board for it's price to performance ratio, compatibility with memory and its standing vs similarly priced competitors

@BuildPicker

Жыл бұрын

Wow, who was that?!

I’m getting both Asus Tuf z690 plus wifi d4 and this msi z690 tomahawk wifi for same price, Which one should I go for?

@BuildPicker

2 жыл бұрын

The Tomahawk is the better specified board if they're the same price. The only reason to choose the TUF would be if you love the looks.

@alexiszurex

2 жыл бұрын

TOMAHAWWWWWKKKK FTW !!!!!!

What an óutstanding channel bro....to the point talks and no fuss... Just love it....i want u get million subscribers....😌😌😌🥰🥰🥰🥰

If I’m gonna buy the z690 tomahawk, which ram will work, DDR4 or DDR5

@BuildPicker

Жыл бұрын

There are two versions: one for ddr4 and one for ddr5. So get the one that's compatible with your chosen ram.

@jcjosue2978

Жыл бұрын

@@BuildPicker which one would u prefer? DDR4 or DDR5, and if u get a z690 DDR4, can u use DDR5?

Would you say this is worth for gaming? I have the i7 12700k.

@BuildPicker

2 жыл бұрын

Yep, fine for that. There's nothing special about gaming, just that it meets your needs for features.

vodka and computer parts?

1st !! Yay !! Another awesome vid !! 👍 !!!

At 1:44 you can see the 2 digit numbers display on the corner of the motherboard but in all other videos ive seen this motherboard doesn't have that. Is that a different motherboard entirely 🤔?

@BuildPicker

Жыл бұрын

That's a shot of the MSI Z690 Carbon.

Great review of the motherboard. I just got my pc with this motherboard, the intel i7-12700k, g-skill trident cl14 3200mhz ram and asus rtx 3080 oc v2. But when trying to overclock either the cpu or the ram, it won't boot up. Doesn't even boot up if the only thing I do is ramp up the ram from 3200 to 3320 mhz. And I can't neither touch the cpu without having to reset cmos. I have a power supply from Corsair, a 1200W Modular, so can't understand what I am doing wrong. I have clocked alot of ram before I got this pc, but I can't touch the cpu or the ram settings if I want this pc to boot at all. What am I doing wrong? Is there a Bios setting that is preventing me from clocking this computer? Any help at all will help me a lot justifying the price tag of this computer. Thanks in advance.

@BuildPicker

2 жыл бұрын

That is strage. I had good results overclocking RAM on this motherboard. First, I would Update your BIOS to the most recent version. That can help with RAM Stability. Second, if you increase speeds you may need to loosen timings because whilst 3200MHz Cl14 is XMP, it may be that 3400MHz Cl14 isn't possible (immediately)! But that sounds like Samsung B-Die. It should be happy up to high speeds (but you may need to increase voltage a *small* amount). Follow an overclocking guide - it's too involved for me to take you through here. You can use intel XTU for CPU overclocking, simpler than using BIOS. For RAM overclocking, it's a case of setting and finding a speed that is stable at looser timings, then bringing timings back down to tight but stable levels. Although, 3200Mhz Cl14, you are as fast as 3600Mhz Cl16 anyway, so gains will be minimal unles syou push past that!

@jorgenstenersen

2 жыл бұрын

@@BuildPicker I tried increasing ram without XMP timings. No dice. I even tried increasing the dram voltage step by step to a whopping 1,55v before I gave up on the voltage angel. Still no luck. I have the latest bios update, but there is a newer one from MSI that is a beta version and possible unstable according to them. Maybe I should give that one a go. I even tried to have both XMP and CPU gamer mode for cpu disabled, and tried bclk increase. At 101 it didn't boot. It is unreal to experience this when I have clocked my parents dead beat computers ram from 2133 mhz to 3480 mhz, and my ram who sits at 3200 mhz can't be touched. And this on a board who is good for speeds up to 5000. Seems like some sort of lock that forbids every modified settings. I have tried inserting exactly the same settings as others who have had success, but it won't boot even then. Very strange.... 🤔

My on board wifi isn't working anyone know a fix?

@BuildPicker

Жыл бұрын

It is the wifi version? Have you downloaded and installed the drivers from the MSI support page for the board? Antennas are screwed into the back of the board?

@joekay1808

Жыл бұрын

@@BuildPickeryes it's the wifi version and antennas are screwed in, ill goto the MSI page and see if the drivers fixes it thanks

@joekay1808

Жыл бұрын

@@BuildPicker it's within return date so worse case I'll send it back🙂

@joekay1808

Жыл бұрын

Sorry another question is there anything important on the included usb if so how do I install?

@BuildPicker

Жыл бұрын

@@joekay1808 Nope,the included USB is blank (apart from some documentation IIRC) Best to get the up to date drivers from MSI, the delay between shipping and purchase means any included software/drivers are out of date anyway.

Bro, Great Video! But please speak slower ;p

Best bang for buck?

And dont forget about crapiest msi software, it shall stay with u )

@BuildPicker

2 жыл бұрын

We'd always caution against installing any motherboard bundled software! It's given us nothing but problems... But you're right perhaps we should include a reference to it.