Really helpfull. Thanks🙌

Thanks bro happy to see your videos

Super bro I will understand easily

Really helpfull. Thanks

We use af motor library of gear motor in voice control car(arduino) Plzzzz tellll

Is there a way to power it besides battery?

Can we run motors with pwm signal????

Very. Nice

I have connected 12 v 300 rpm Johnson motors to my shield and a servo too but one of the motor isn't running , all other motors are getting voltage but one motor is lying in between 1v and the shield ic is getting heated , how to solve?

If you are connecting your shield with External power supply, then you should remove the jumper at PWR port. 3:14

I couldn’t find a battery holder could you tell me how to fix it please ?

Bro at a time power supply to arduino and shield one of battery and USB same time to power on what happen bro

How many rpm of motor I made light tracking robot all working but only left side motor is working not right side and motor is 100rpm plz reply

thank you so much

@user-wm8qw5qf5m

3 жыл бұрын

thank you very mach king:)

Is L293D motor driver module compatible with raspberry pi?

This card is used to control a servo that consumes a voltage of 8.4v? And how much should I feed her?

Hey. When I use the shield are there any inputs left for buttons or sensors?

@peeei7423

8 ай бұрын

yes, GPIO pin 2 and 13 are unused

@diamondglitter205

6 ай бұрын

also A0 to A5 are unused

sir , in my moter driver shield l293d, when i connect moters it is not working. i am useing 12 volt battery, plzz reply.

@sritu_hobby

2 жыл бұрын

12v voltage is good.But check again your code

I have problem with the outer voltage m4 it gave 7volt but the 3 authors it gave me 2volt what is the problem,? My battery zee 7v 5200mah

Good video thanks

@sritu_hobby

Жыл бұрын

You're welcome

iam too late 😓, but if u see this can you tell me if this driver shield can plug-in 4 gear motors?

@sritu_hobby

2 жыл бұрын

yes of course

How to connect this Arduino and L293d with nodemcu esp8266?

@praveenjat8848

3 жыл бұрын

@@sritu_hobby is it possible?

Please make LDR sensor control of &on reverse & forward

Hey what is your battery's mah? I have used li-on bettry 3.7 volt 1200 mah (3 battery in series) in same motor driver but after battery connection my motor drive' IC is started to burn so what is perfact mah and volt for this motor driver

@sritu_hobby

2 жыл бұрын

4800mah

@creativecraftingbhaumik2296

2 жыл бұрын

Hey I have connected 2800 mah 1.2 v 8 battery in series and after 1-2 minutes my motor driver's Ic heated like glue gun what to do ??

@kaushaltrivedi8877

2 жыл бұрын

Pls use 7 volt bez i have experience my bettry volt is 3.7 and using 3 battery in series so. Ic was burn pls use a powerbank in aurdino by usb and give extra power by adapter in arudino don't gave power in motor driver i have two time experience

@creativecraftingbhaumik2296

2 жыл бұрын

@@kaushaltrivedi8877 ok ,thanks

@creativecraftingbhaumik2296

2 жыл бұрын

And one more thing if I run 2servos IC does not heat but if I connect normal dc motor it's starts heating in 5seconds

Can I use 9v battery to test it and in future projects?

@sritu_hobby

2 жыл бұрын

You will

@amartechs9267

2 жыл бұрын

@@sritu_hobby Can I use 9v battery pls answer yes or no I am getting confused

@sritu_hobby

2 жыл бұрын

You can use

@amartechs9267

2 жыл бұрын

@@sritu_hobby Ok thanks Plus I commented on that Voice control+Bultooth control+Obstacle Avoidance video. Pls reply to that question

where is the programme

well explained, but the audio description could have been better.

@sritu_hobby

2 жыл бұрын

Thank you

I have made Arduino blutooth control car with sensor . It gets connected but does not run . Please help.

@sritu_hobby

2 жыл бұрын

Please check my previous videos

@vivaanbhasin3192

2 жыл бұрын

Ok thanks

Nice..but how conect multiple servo and one stepper?

@sritu_hobby

Жыл бұрын

2 servo motors and 2 stepper motors

@etstudio1790

Жыл бұрын

@@sritu_hobby i need 1 stepper,3 servo 🥹

bro i uploaded the code but my servo in not working plzz tell😘

@sritu_hobby

Жыл бұрын

Please visit my website for this issue

Bro till how much mah battery we can plug to motor driver shield bro can I use 4.2 v 6000 mah battery of 2psc is the motors works good bro plz give me a solution bro plzz

@sritu_hobby

3 жыл бұрын

Its not issue..

@premsaisiddi24680

3 жыл бұрын

Thank u bro

@premsaisiddi24680

3 жыл бұрын

but bro when I keep my 20000mah powerbank it is not supporting that means car is not moving at all why bro means for 6000mah 2 psc means 12000mah it is. Ok naa bro

Bo motor test not working . I used a 9v battery but it didn't work I used li ion battery but it also didn't work. What should I do now ?

@sritu_hobby

2 жыл бұрын

Check your motor wires and program

How many gear motors can the motor driver control ?

@sritu_hobby

Жыл бұрын

Two

@ramadguy7076

Жыл бұрын

Why only 2 tho it has many attachment point (sorry i'm new in the electronic world )

يتعذر الاشتراك ولا يوجد جرس-يتعذر التعليق - لا أعلم .

Make drone with arudino chip

@sritu_hobby

2 жыл бұрын

Ok sure

if i use stm32 which is the signal pin, how are you going to control the dc motor

how to connect L293D Motor Driver Shield to the Raspberry Pi

Its code can be found?? Plz send me

@sritu_hobby

2 жыл бұрын

Please visit the video description

@arslanafzal6217

2 жыл бұрын

@@sritu_hobby thank you so much

My motor driver is making a beep sound i created an obstacle avoidng robot its not moving znd making beep sound whats the reason

@vaishuutage4625

6 ай бұрын

Amae

@vaishuutage4625

6 ай бұрын

Same

ULTRA FIRE xd, 4800 mAh yeah in what reality. Max capacity for 18650 is around 3500 mAh closer to 3450. I once was young and stupid too and bought 16 18650 from ultrafire 8 with 7800 mAh and 8 with 8800 mAh. To obtain real capacity value you simply need divide by 10

L298n vs L293d motor driver

Bro is it necessary to first join the circuit then code the Arduino? Can i first code the Arduino the join the circuit???

@romnathbaba3287

Жыл бұрын

Yes you can bro!!

@TheNoobVishu

Жыл бұрын

@@romnathbaba3287 does it work same

@TheNoobVishu

Жыл бұрын

@@romnathbaba3287 But my Arduino is getting heated

Give me code please

@sritu_hobby

2 жыл бұрын

Please visit the video description

Where is the code?

@sritu_hobby

3 ай бұрын

Description

My Arduino is getting burnt anyone have any idea y it's happening

@sritu_hobby

8 ай бұрын

Check your power source

hello, give your arduino code

@sritu_hobby

Жыл бұрын

Check the video description

Hlo

@sritu_hobby

3 жыл бұрын

English??

Is L293D motor driver module compatible with raspberry pi?