👉 Invetrer 3000W: www.banggood.com/custlink/m3G...​ 👉 RD6018W : bit.ly/3oMozQe​ 👉 Shopee : shorten.asia/QtbMbqFq​ 👉 Spring Sale : bit.ly/3bZ8NOM​ 👉 Tools & Electronics - bit.ly/3cIJPlZ

@joejibril5376

2 жыл бұрын

Kalau beli sudah jadi memang enak tinggal pakai...buat sendiri dong.

@jovangrbic97

Жыл бұрын

Why does one transformer have 2 pins on the secondary connected, while the second one has 3 pins connected/wired? What is this third wire on the second transformer? Are they not identical? Thanks!

Brilliant video. Well done thanks. This is exactly how i like a video. No nonsense just the facts. 10/10

Though the video is short, it is very clear and concise, and fully explains the topic in all the details. Thank you!

That is some great modification!! Please make this inverter design

Excelente explicación sobre esta cuestión de 12 a 24,siempre había querido hacerlo,pregunta,?como hago el cambio en un WAGAM TECH 12 vol Slimline 1500 Watt,ITEM#3722 y permITEN 2004,Gracias.

Well done keep up the awesome content and I really appreciate your work Dude 👍

Um excelente vídeo, desde que comecei estudar sobre inversores, faz pouco tempo, eu tinha essa dúvida de como fazer essa alteração. Obrigado por compartilhar esse conhecimento. An excellent video, since I started studying about inverters, a short time ago, I had this doubt about how to make this change. Thanks for sharing this knowledge.

@PhdHung

2 жыл бұрын

good luck

It’s toughest work u do,thanks a lot

Your projects are excellent !!!

Hi...I am trying to understand how the pulse transformers you show work. How many turns were on the original transformer you rewound?

Please. This copper tape you used in the transformer, what are the measures? Length, width and thickness and how many?

I am always excited seeing ur posts.. Always educational, always have a way to read ppl's mind to giv us wat we long for.. Good one sir... Sir I want to ask, is it wrong to parralel 2 ferrite transformers(3:96 turns each) and thier output connected to a single fast bride rectifiers?? Or its beta to series both(wit lesser sec turns)?? 🙏 🙏 thanks in anticipation

Does the outpout power of the inverter changes between the 12v and 24v configuration?

Merhabalar, yapmış olduğunuz işlemde çalışma voltajı (V) artmıştır. Güç (W) arttı mı?

Also...did you rewind both transformers and if yes, were they wound the same?

hello I have a question. would that green toroid core at 2:49 work as a transformer?

I always wanted to know this!

Waiting for this 🤩 thanks

This is helpful!! Thank you

How many watts is your soldering iron? It easily melts that solder even with such a thick copper pad with solder layer

Can you make good 12v 80A car Battery Repair or Desulfator

¿y con la proteccion por sobretension y baja tension no hiciste nada??

Why does one transformer have 2 pins on the secondary connected, while the second one has 3 pins connected/wired? What is this third wire on the second transformer? Are they not identical? Thanks!

I don't understand the rewinding of the transformer part where did u get the isolated flat copper cable

Quais mosfet usado no 1000w?

Sir can we use a litz wire in a normal 50hz transformer????

Wow!! how easily you changed the circuit Bro please make this 2000 w two transformers in series type inverters please

Hello, very nice, but how to do the opposite ? from 48v to 12v ? thanks

Mau tanya master tegangang maksimal pada inverter 24 volt itu berapa. Amankah jika pakai baterai lithium ion 7s

Very good, thanks!

Fantastic idea

Can I print the circuit 12 to 220? Can't load under the clip.

Thank you

anh ưi anh cho em hỏi biến áp kích điện nó chạy lõi ferrit nó có nóng khum ạ anh, em làm nó bị nóng cái fe mà không nóng dây đồng ạ!

Can this work with all 12v inverters?

Nice conversation.👍

Nice work thanks 🙏 👍 it

thank u for sharing! great idea! i had 24v - 240v ac inverter. how to convert it to 12v - 240v ac? did i have to reduce the primary pulse coil? please advice... thank u!

@Johan.A02s

2 жыл бұрын

Step-Up Module 12v to 24v and you're done 😉

Your knowledge is good

@PhdHung

3 жыл бұрын

wow good work

Bro I can use PQ 32/30 for inverter.

nice sharing bro

you are great bro !

very good

Good work

Nice i try this at my inverter thanks

@PhdHung

3 жыл бұрын

goodluck.

Thank you for content

@PhdHung

3 жыл бұрын

Thanks

I have a similar inverter and for some reason it sometimes starts at 170v. If I plug a fridge it it fluctuates 170v-220v…. What’s wrong with it?

Awesome video

Why did you reduce the size of the copper sheet

Today I will show you how to convert a 12V sine inverter into 24V. Step 1: Replace the 25V capacitor into 35V or more . I use 1000uF-63V Step 2: Replace mosfet 1404 with IRF3205, 80n70 etc .. Step 3: Rewind the pulse transformer EE42 . Primary 4 + 4 turns . Secondary 28 turns 17AWG Step 4: Replace the feedback resistor.

@tranlong2433

3 жыл бұрын

dòng không tải cỡ bao nhiêu vậy anh ? em làm 3 cái tg1000 mắc nối tiếp dòng không tải tới 1A bộ 24v, em giữ nguyên sơ cấp 4x4 còn thứ cấp thì 30vòng mỗi biến áp

@albertas978

2 жыл бұрын

Thank you may try this on my inverter since I'm switching my system to 24 v from 12v

@sigitzgemini9245

Жыл бұрын

how to convert 24v to 12v inverter?

@radit68i

Жыл бұрын

What was original turns. Just for comparison

amazing bro!!!

U r always great👍👍👍

@PhdHung

3 жыл бұрын

thanks bro

Sir, How to decrease 48v input to 12v Dc inverter

Extreme

GREETINGS SIR PLEASE TROUBLESHOOT MY PROBLEM I HAVE EI33 TRANSFORMER I GIVE 4+4 turns in primary and 15+15 Turns in secondary my mosfets are turning on properly i am using 27Khz with 20AWG wire for primary and sec i have wound it just like your videos but when i am connecting it to my circuit it is shorting and damaging both mosfets what is hapeening here? Thankyou

Can i get some help? I just have a cj1000w, green lights on and no indication of fault(red lights off). I checked all mosfet but all are good..I ve got a reading on the output 2.2v insteat of 220v...the output capacitor also 0 volts no voltage recieve

@nastasavalentin9754

2 жыл бұрын

I'm looking for this answer too. You managed to work

Great

Sir Please, how do I convert a transformer inverter from 48v to 24v. Thanks

My inverter 24v I want to change 24 to 12V input .... please help

Hi..how to change 50hz to 60hz? Best regards

if you get a chance, could you will show us how to convert a 24V sine inverter into 12V. thanks

@PhdHung

3 жыл бұрын

haha, ok bro

Hello Bro . I had a question, is the isolated power supply for SPWM from 12V or does it supply SPWM from 350V?

@PhdHung

3 жыл бұрын

12V bro

@homeelectronic1775

3 жыл бұрын

@@PhdHung Thankful. If it supplies power to the SPWM driver from the 12 volt section. Do not need to change this power as well? It is possible to explain this.

@OctavMandru

2 жыл бұрын

Probably the regulator can handle the 26+ volts. I was also curious about this

Mót lại cái này cho đức. Hôm trước lại cháy biến áp. Can tội. Tháo quạt tản nhiệt ra và tải nặng. 😁😁😁😆

@PhdHung

3 жыл бұрын

:v

Como mudar de 24v para 48v

Hello sir in my area copper strip not available so what's wire in mm can I used in primmery section pls give me a detail.this is my first question in my life I m from pakistan

@PhdHung

3 жыл бұрын

can use 3mm2 bro.

Оо спасибо. Лайк. За всего 28виток от 220 вольт. Спасибо я зампони)))

@PhdHung

3 жыл бұрын

28 x 2 bro.

@PhdHung

3 жыл бұрын

2 transformers connected in series

Do a video showing you change 24v to 48v

Nice and amazing

@PhdHung

3 жыл бұрын

Thanks bro

có làm được inverter 12v hoặc 24v chạy pin 5s 18v được ko ạ. có clip hướng dẫn cho mình xin với

@PhdHung

9 ай бұрын

Chưa có khách đặt bạn.

Muito bom amigo!!!

@PhdHung

3 жыл бұрын

Thanks

Hình như cái kích này của bên ANH THỢ ĐIỆN Hay sao nhỉ ?

What's value of no load input battery current ?

@PhdHung

3 жыл бұрын

8:05

The man knows really alot about elektronics. Can't connect the bulb to the socket :)

Anh ơi để sử dụng vs hệ acquy 48V thì cần thay những gì ạ

@PhdHung

3 жыл бұрын

thay mosfet 100V. thay tụ 80V, quấn lại biến áp xung 8+8 vòng. Thay trở hồi tiếp nữa thôi bạn.

dose the same process apply for 12v to 48v (54v) conversion ?

@Exterminator131

Жыл бұрын

Of course, it does! It does apply to any voltage you need, just element base must be appropriate for the required voltage: transformer, MOSFETs, resistor etc.

@yusifsuleiman5502

Жыл бұрын

​@@Exterminator131 Please, how do I convert a transformer inverter from 48v to 24v

@Exterminator131

Жыл бұрын

@@yusifsuleiman5502 The approach is the same, in general. First of all, you need to change transformers - the conversion ratio must be two times higher, e.g. the number of wire turns has to be twice more! You need to check also the other parts, mentioned in the video, in particular, MOSFETs. Though you are gonna switch from higher voltage, hence, the ones have bigger voltage capability, on the other hand, the current will be two times higher, if you decide to draw the same power from the battery.

@yusifsuleiman5502

Жыл бұрын

@@Exterminator131 okay, thanks

👍

@kdcreativity6201

3 жыл бұрын

Bro i literally saw your comments on every electronic related videos 😂

👍👍

24v to 12v kese hoga sir

Why do we need to do this ?

Where is full description or name of each device so that i can understand step by step because i don't know what are you doing, i dont have any idea but we have 12v inverter here and i want to follow your step by step by i don't understand. I cant copy or follow complete 100% because im not a technician or electrician or what else. I want to do it my self by copying your atep by step but how if didn't put ,you know what i mean for the beginners like me

12v mà làm lên 24 v thì thêm tiền nha em .....he he he cái bình xịn coi bộ nhiều tiền nha

Hình như Anh Đức nhờ anh độ 😅

Độ khởi động mềm cho con topshak đc không a

@PhdHung

3 жыл бұрын

kích sine hầu hết là sẽ mặc định ở chế độ có khởi động mềm. Nếu ko có thì bạn tháo ra, nhìn xem có jump soft start không rồi ngắn mạch cái jump đó lại là đc.

500watt inverter 1000watt me convert kaise kare Plz upload videos

Is this a pure sine wave inverter

@PhdHung

3 жыл бұрын

yes

@llipbarry4426

3 жыл бұрын

@@PhdHung mine is similar, but I'm not sure about locating and changing the feedback resistor

mấy con kích 12v sin chuẩn này có con nào dưới 500w ko ah??

@PhdHung

3 жыл бұрын

có chứ. 300W cũng có

Di beli gesss

👍🏻👍🏻👍🏻👍🏻 please modify 24v to 12v inverter 🙏🙏🙏🙏

@safetyfirst1484

Жыл бұрын

Simply reverse the procedure. Your only concern would be rewiring the transformers or transformer for 12v depending on the number you have. No need to change the mosfets.

Bac gioi wa

@PhdHung

3 жыл бұрын

tks bạn

@oannongvan6282

3 жыл бұрын

@@PhdHung cho hỏi thêm tý 12v 3000w và 24v 3000w nó khác và mạnh ợ điểm nào ..

@PhdHung

3 жыл бұрын

@@oannongvan6282 12V ko có 3000W đâu bạn. 1500W là cố gắng lắm rồi.

Anh ơi nhạc nền anh hay dùng tên là gì vậy? Em cảm ơn anh nhìu♥️♥️♥️

@PhdHung

3 жыл бұрын

toàn lấy trên youtube studio ấy. mấy nhạc đó ko có bq

@ucuc4030

3 жыл бұрын

@@PhdHung anh cho em xin tên ạ😅

220 V / 3,15 A. OK...

Its much more easy to pay 90euro and buy a new. Thanks for your try.

anh có bo sóng sin của con này k ạ

@PhdHung

3 жыл бұрын

còn 1 bo bạn à

@phamong3974

3 жыл бұрын

để lại cho em đi chứ bỏ cái kích đi thì phí quá

@PhdHung

3 жыл бұрын

Bo này nó khó hỏng lắm. bạn thử thay IR2113 xem.

@phamong3974

3 жыл бұрын

thay con đó dc k ạ em đo bị mất một vế xung thay mosfet vào cho tải dc tí lại chết

Hi.when you design a board like this with 2 or 4 transformer series to gathering to made real 1500 to 2000 watt...12 or 24 volt...?..?all thing you designing is so better of this we can find in stores....we are waiting for your design with 2 or 4 transformers series to made real 2000 watt.tanx.have nice time.

@PhdHung

3 жыл бұрын

ok bro. wait

👍👍👍😘

are you the guy who always forgets the schematics?

@PhdHung

Жыл бұрын

This project has no schematic.

Hello Friend! you should design an inverter with more powerful mosfets, with more popular ICs without programming, and make the project available free of charge, so that the most humble people could have access, with a fair contribution. This is just a suggestion, I hope you understand me. I thank you for your attention, thank you! Also, I would like you to publish more educational videos, explaining each step step by step, I thank you for your attention and I want your channel to grow even more.

14 detik kk

don't 4get to discharge those ''capacitors'' with the light bulb!!!