Just subscribed been doing and in bands for 50 years this little tip fixed 2 of my mixers....thanks so much never thought of it thought it was a bigger problem...your awesome
@aarr469 Жыл бұрын
Help Hello .. I bought a behringer eurorack mx 802a on eBay without powersupply... Based on research the powersupply thst comes with it is 18v for 2 of the pins (xlr) at 800 mah.
@mhertzbe
If you fiddle around with something for long enough, sometimes it become "fixed." Also remember that "if you fiddle with something for long enough, you'll break it." "Adjusting" this mixer by tightening and loosening the nuts that hold the jack in place is ridiculous. Sure, tighten those nuts if they're loose. After that, spray some contact cleaner down into the jack and insert and remove a plug a bunch of times. the previous advice to bend the "springs" on the jack might also be useful but they're not normally accessible.
@daniellesaux61522 жыл бұрын
I realize this video is a few years old but I have been having issues with the FX returns o my 1202 for a few years now and couldn't figure out what was wrong. I had tried Deoxit several times but the issues persisted (intermittent signal). Well after watching this video I tried tightening the jack nuts as suggested and the issue appears to have gone way. I wanted to thank you for posting this and for helping me solve my problem!
@MrliquidDj2 жыл бұрын
You are my best friend now!!!! lol THANKS!!!!!!!
@rockman49er2 жыл бұрын
My mixer is still working but my level indicators aren't moving anymore they stay on red also my db meter and spectrum analyzer are not as sensitive anymore I have to turn it up louder to see them now my mixer is a brand new 3 week old pyle 83bt I'm stumped is this normal or is it broken and should I get a new mixer
@gabedestellano Жыл бұрын
Those 1/4" inputs have three clicks, it's called a 3 stage input so depending on what cable you're using, whether it's a tip sleeve (TS) or tip ring sleeve (TRS) and what your input source is, you should insert those cables in different positions in the input. It's all in the user manual, perhaps you should check one of those out before using gear in a professional situation.
@shanefrancis64113 жыл бұрын
Exactly what was wrong with mine! Thanks
@selectorerwin1don122 жыл бұрын
Im am having this same minor issue with my behringer 1202fx no lights on left channel but im gettn audio
@TemuulenGanzorig3 жыл бұрын
How do i fix the usb input from the mixer to the computer? The sound is okay when i listen on my earphones but when it’s recorded on the computer, it sounds horrible
@manuelespinal14883 жыл бұрын
estaba pensando en comprar un mixer nuevo, vi tu video y lo repare....now is working like new....thanks
@selectorerwin1don122 жыл бұрын
GREAT VIDEO THANKS
@nawidanwar87495 жыл бұрын
You definitely found the source of the problem but by turning those nuts the problem will not be fixed. You have to replace the sockets in order to fix it right.
@jeffgutierrez87963 жыл бұрын
Thank you. Useful information.
@netautorisationnetautorisa545 Жыл бұрын
IS HAS NOTHING TO DO ...WITH THIS ..."TURNING" .... (BAD SOLDER)
Пікірлер: 19
Just subscribed been doing and in bands for 50 years this little tip fixed 2 of my mixers....thanks so much never thought of it thought it was a bigger problem...your awesome
Help Hello .. I bought a behringer eurorack mx 802a on eBay without powersupply... Based on research the powersupply thst comes with it is 18v for 2 of the pins (xlr) at 800 mah.
If you fiddle around with something for long enough, sometimes it become "fixed." Also remember that "if you fiddle with something for long enough, you'll break it." "Adjusting" this mixer by tightening and loosening the nuts that hold the jack in place is ridiculous. Sure, tighten those nuts if they're loose. After that, spray some contact cleaner down into the jack and insert and remove a plug a bunch of times. the previous advice to bend the "springs" on the jack might also be useful but they're not normally accessible.
I realize this video is a few years old but I have been having issues with the FX returns o my 1202 for a few years now and couldn't figure out what was wrong. I had tried Deoxit several times but the issues persisted (intermittent signal). Well after watching this video I tried tightening the jack nuts as suggested and the issue appears to have gone way. I wanted to thank you for posting this and for helping me solve my problem!
You are my best friend now!!!! lol THANKS!!!!!!!
My mixer is still working but my level indicators aren't moving anymore they stay on red also my db meter and spectrum analyzer are not as sensitive anymore I have to turn it up louder to see them now my mixer is a brand new 3 week old pyle 83bt I'm stumped is this normal or is it broken and should I get a new mixer
Those 1/4" inputs have three clicks, it's called a 3 stage input so depending on what cable you're using, whether it's a tip sleeve (TS) or tip ring sleeve (TRS) and what your input source is, you should insert those cables in different positions in the input. It's all in the user manual, perhaps you should check one of those out before using gear in a professional situation.
Exactly what was wrong with mine! Thanks
Im am having this same minor issue with my behringer 1202fx no lights on left channel but im gettn audio
How do i fix the usb input from the mixer to the computer? The sound is okay when i listen on my earphones but when it’s recorded on the computer, it sounds horrible
estaba pensando en comprar un mixer nuevo, vi tu video y lo repare....now is working like new....thanks
GREAT VIDEO THANKS
You definitely found the source of the problem but by turning those nuts the problem will not be fixed. You have to replace the sockets in order to fix it right.
Thank you. Useful information.
IS HAS NOTHING TO DO ...WITH THIS ..."TURNING" .... (BAD SOLDER)
0:06