Minn Kota Terrova iPilot unboxing and detailed install

I bought the new Minn Kota Terrova Riptide with I Pilot for my new used boat that I am going to be using for salt water as well. This model is 80lbs with the 60 inch shaft, which is overkill for this boat but thats what Bass Pro had in stock with shortages everywhere. I had Terrova with spot lock on my last boat and now cannot live without it.
The trolling motor- minnkotamotors.johnsonoutdoor...
Install Manual-minnkotamotors.johnsonoutdoor...
Amazon Affiliate Link
Wire splice kit-amzn.to/3wLQDsj
Foot Pedal- amzn.to/381UtWs

Пікірлер: 31

  • @day-cinvacuums5909
    @day-cinvacuums5909 Жыл бұрын

    Enjoyed watching both of your videos. And, I actually just purchase the exact Minn Kota Rip Tide from Bass Pro right before Christmas. I looked and compares all of the Rips Tides. I landed on the very same unit you own. I will not be getting a foot control unit, but its nice to know that is an option gong forward. By now you know the Rip Tide In-line Unit is the next model up that allows you to connect with your Humming Bird Depth Finder. Also, its hand control unit is different, other than that, its the same unit. The Blue Tooth Round Devise (12 volt unit) helps direct your GPS Main Head unit to stay on true north. Mainly if you where to fish under bridges, you loose GPS, and the Blue Tooth Devise allows the unit to find and stay on true north. Once again, i enjoyed watching your videos, and appreciate seeing a hands on person figuring this unit out. Because, its not any easy to figure out- straight out the box. After all, it can take up a lot of space in me garage as well. Hopefully, I'll send you a few pictures once I get my unit installed come spring. Thanks again, and happy fishing and go Spot Lock! Dave Hamester

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Thanks for watching! It will still loose spot lock under a bridge fyi had it happen a few times

  • @Got2gofishin
    @Got2gofishin Жыл бұрын

    Super cool garage

  • @Deflection
    @Deflection3 жыл бұрын

    ''wait until the wife calms down alittle bit more...." haha, that made my day :-P

  • @ChrisFitzmaurice

    @ChrisFitzmaurice

    2 жыл бұрын

    mine too!

  • @BendItFishing

    @BendItFishing

    2 жыл бұрын

    Lol

  • @glennsilva5915
    @glennsilva59152 жыл бұрын

    U did Nice job my friend

  • @tommyrt681
    @tommyrt6818 ай бұрын

    Thank you for your input. Your words make sense and I will be going the cheaper route after spending 1800 on my new minn kota terrova

  • @BendItFishing

    @BendItFishing

    8 ай бұрын

    Glad it was helpful!

  • @chubbrock659
    @chubbrock6592 жыл бұрын

    I just added this same motor to my pontoon boat, but I used the quick release so I could take it on and off if wanted. highly recommend!

  • @BendItFishing

    @BendItFishing

    2 жыл бұрын

    I have looked at those as well, but couldnt think of a reason to take it off

  • @chubbrock659

    @chubbrock659

    2 жыл бұрын

    @@BendItFishing i was thinking if I am traveling and staying in a hotel somewhere, it couldnt get stolen that way. I guess being bolted down would make it hard to steal too though.

  • @BendItFishing

    @BendItFishing

    2 жыл бұрын

    True. I know people take it off to fly fish off the bow

  • @trentc6069

    @trentc6069

    Жыл бұрын

    Did you have to drill additional holes for the quick release bracket

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Only 4 or 6 holes for the mounting plate

  • @davidlhotaling6738
    @davidlhotaling67382 жыл бұрын

    Thanks for the video, Watched a few of these to get a comfortable feeling before installing. Guessing you've figured out that you can't connect to your Hummingbird. My understanding is that you need the i-pilot LINK version to do that. Unfortunately with the shortage, I haven't been able to find one at Bass Pro. Besides, your wife might have a kitten, they're about $400-$500 more that the unit we bought. Still haven't unboxed mine yet in the hopes a LINK model will pop up before I go to install.

  • @BendItFishing

    @BendItFishing

    2 жыл бұрын

    Thanks for watching. I know they don't link and didn't think I would have used it till yesterday where I was trolling and it would have been perfect. Don't be scared to install. It's 4 holes that's it.

  • @diceman220
    @diceman220 Жыл бұрын

    Due to supply shortages the heading sensor will not be included with some models. Applicable models will have a redemption form for this item to be shipped at no charge when available.

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Oh I did hear that.

  • @diceman220
    @diceman220 Жыл бұрын

    Nice Minn Kota. Did your remote work right out of the box? No pairing etc. Thanks, and tight lines.

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Yes right out the box it worked. The heading sensor needs to be paired but it's easy

  • @dannypaul3333

    @dannypaul3333

    Жыл бұрын

    @@BendItFishing

  • @diceman220
    @diceman220 Жыл бұрын

    I picked one up at Cabela's I paid the same price but is the heading Sencer supposed to be included or buy separate?

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Mine was included

  • @diceman220

    @diceman220

    Жыл бұрын

    Why is that. ? Thanks for all the information.

  • @ajmobilemastertechniciannu9427
    @ajmobilemastertechniciannu9427 Жыл бұрын

    does it have to be in the ready down position for it to work and spin

  • @BendItFishing

    @BendItFishing

    Жыл бұрын

    Yes and no. Once it's out of the locked position you can spin it freely and turn it on. I use it that way in shallow water near launch

  • @CaptCollier
    @CaptCollier3 жыл бұрын

    man, i wouldnt run that thing without a circuit breaker. ive burnt one up before without one

  • @BendItFishing

    @BendItFishing

    3 жыл бұрын

    I have one for it now, just have to install it.

  • @brixelus
    @brixelus3 жыл бұрын

    Topher Grace?

  • @BendItFishing

    @BendItFishing

    3 жыл бұрын

    So I've been told haha