Engines are normal sized he's just a Giant

@Matty.Hill_87

Жыл бұрын

I can get on board with that theory 🤔🤣

@Javierblaszczyk

Жыл бұрын

@@Matty.Hill_87 yeah have a nice day M8

@Matty.Hill_87

Жыл бұрын

@@Javierblaszczyk you to mate

@JeebuzCrist

Жыл бұрын

Engines are giant sized and he's a giant

@Javierblaszczyk

Жыл бұрын

@@JeebuzCrist maybe

Everyone thinks working with multi-ton parts is hard but after a lifetime of machine work I can tell you the small parts are the real challenge. I am amazed at the level of detail in this assembly. Very seriously impressed, this is watch maker level precision.

@repentandbelieveinJesusChrist3

Жыл бұрын

Repent to Jesus Christ “You also must be ready, because the Son of Man will come at an hour when you do not expect him.”” ‭‭Luke‬ ‭12:40‬ ‭NIV‬‬ J

@tomvet4411

Жыл бұрын

I think working with the heavy parts is hard, but I definitely agree that working with smaller parts presents its own unique set of challenges. It's much easier to get a grip on a tie rod than it is a tiny screw. Especially when your old like me and your eyes and fingers don't want to work like they used to.😁

@sjwon

Жыл бұрын

Side valve engine

@kevink363

Жыл бұрын

Yup

@asahmosskmf4639

Жыл бұрын

Yea and i looked it up. Its cool but i dont have $1,500 for one 😂 . It is awesome though !

Didn't even know there was working mini model engines. Awesome work.

@Andre_Thomasson

Жыл бұрын

Search for toyan engines you will fing some pretty cool stuff: v8, rotaries (including a 2 rotor one), inline 4rs, 2 cylinders, single cylinders and even a supercharger for the toyan v8 with that awesome whine

@joeyginise6051

Жыл бұрын

@user-wx2bk8is4s now I want to see some put this on a rc car.

@rooski1788

Жыл бұрын

ikr? it just tickles my brain watching it get put together

@sharkkord

Жыл бұрын

this was designed to be used in an rc car

@EngiNetion

Жыл бұрын

@@joeyginise6051 there are videos on yt where people use those engines on RC cars, worth checking them out.

Love it so much these little engines are so cool

@erenbozkurt6298

Жыл бұрын

Hayır o motor devasa

I love how, because of the last video on mini engine building where a ton of people were questioning your timing of the cams, you show the TDC/timing marks/process on this one. :D

@antilitarded4142

Жыл бұрын

I'm thinking the poor exceleration is due to the timing being 12* Before TDC (top dead center), not 12* BELOW TDC, and work up from there, like it should be......

@wigs1098

Жыл бұрын

There's no below TDC. You are timing on degrees of rotation before TDC. He is correct.

@DaftFader

Жыл бұрын

@@wigs1098 Yeah, I was so puzzled at this comment I just ignored it. Lol

@SnowTiger45

Жыл бұрын

@@wigs1098 Either way, it still sounded like a timing issue whether it was retarded too much and needed to be advanced or visa-versa. I'm guessing one or two degrees different would have resolved it. But then a leaking front seal and by the look of the smoke, either the rear main seal or head gasket was starting to go too. Some of the parts weren't machined all that well too which made me wonder about the overall quality of the system although it is still very cool.

@dirtydozen9570

Жыл бұрын

👍#300💯💯💯

Wow an actual miniature version of a real engine! All the other ones I've seen are not in my opinion because they are not fired with a spark plug and do not have an oil system. This engine is way cool!

@mattcast8761

Жыл бұрын

But not a the correct design level 😉

@rusty383

Жыл бұрын

You should see the Ford style V8s that runs

@PlumGurly

Жыл бұрын

Yeah, some are just models, not actual engines. This certainly is cool.

@wytche3546

Жыл бұрын

@@mattcast8761 yeah, it's not even the right color

@kotak4420

Жыл бұрын

@@rusty383 and also Ferrari 312PB scale model. Years of of hardwork put into it. Amazing dedication.

В детстве лет 20 назад мечтал что в игрушечных машинках будет такой настоящий двигатель в миниатюре🙂

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

I find it absolutely delightful that this engine actually uses spark ignition instead of glow plug ignition.

@pingabl3

Жыл бұрын

an actual oil system is still the best part cuz every other model engine is just pumped full of grease

@guaporeturns9472

Жыл бұрын

Yep , and oiling system and liquid cooled. Pretty neat

@77funtomas

Жыл бұрын

Are you really sure of what glow plugs are used for?

@guaporeturns9472

Жыл бұрын

@@77funtomas Yeah diesels use them but many of the old school Cox motors for rc planes and cars used a glow plug , not a spark ignition… I think that’s what he’s talking about

@cameronjenkins6748

Жыл бұрын

@@77funtomas I honestly can't figure out what the purpose of your comment was.

I'm way more impressed with this than I thought I would be.

@willemh3319

Жыл бұрын

me too

@luishernandezrill5633

Жыл бұрын

Don consigo uno

@billgale2264

Жыл бұрын

Ditto

@josephkaminskid.o.personal2936

Жыл бұрын

and then there were 4!

@kensanity178

Жыл бұрын

@Repent and believe in Jesus Christ you need to keep your remarks in your home and in your church. You are the one who blindly believes in virgin birth and coming back to life after death. You are the one who talks to an invisible friend. Virgin birth is a lie and all of Christianity is based on this lie. You and those like you want to take all the advantages of modern science and live a good life while you're trying to drag us all back 2000 years with superstitious nonsense. So shut it up.

A lot like the motor in my 8N tractor,just a little smaller! Dig those mini spark plugs!

@ampatriot

Жыл бұрын

I was fixing to say, look at that little 8N engine

@pattonm4753

Жыл бұрын

@@ampatriot same

Вот это "игрушка" для взрослых дядинек ! Прекрасное исполнение исходных комплектующих . И какая сборка ! Мастер ! Отличная лабораторная работа для обучения двигателистов в колледже !

@user-cl8wn8de7g

Жыл бұрын

Да такие вещи надо в детском мире продавать по доступным ценам, и папаши вместе с сыновьями будут собирать... А как обучающий комплект в ПТУ или технарь, вообще незаменимая вещь... Но габариты должны быть уже другими.. PS. Себе бы такой купил... За приемлемые деньги... Но увы и ах.. Стоит наверно как чугунный мост в Москве...

@vladimirgarbuzyuk8408

Жыл бұрын

@@user-cl8wn8de7g Да , цена наверно кусается Это фактически малый двигатель , Для папы и сына после 13 лет . В каком сейчас классе изучают устройство ДВС ? Наверно проще будет семьей перебрать двигатель от Оки - по цене .

@user-lm8ov7cw7b

Жыл бұрын

Беда в том, что заставить чадо ковыряться в старом, грязном, б/у двигателе Оки, большая проблема. А здесь всё новенькое, чистенькое и маленькое. Таким заинтриговать проще. Р.S. Имхается мне, что такое наши чинайские братья делают. Особенно учитывая неровную работу продемонстрированного экземпляра. 😂 Похоже, не только опережение зажигания не на месте, но и фазы газораспределения сдвинуты. Кстати, приличный шелест при прокручивании вала на сухую, говорит о том, что детали парами не обрабатывали. Такое прикатывать и прикатывать, и не факт, что прикатаешь.

@vladimirgarbuzyuk8408

Жыл бұрын

@@user-lm8ov7cw7b Продолжая опасения скажу ,что только технически продвинутый папа сможет устранить все недочеты (недоделки) указанными Вами . В результате - выброшенные деньги и надолго испорченное настроение . Наверно лучшее - такие наборы собирать как в старые времена - в кружках , Домах юных техников и т.п. И опять все это упрется в деньги .

@user-lm8ov7cw7b

Жыл бұрын

@@vladimirgarbuzyuk8408 Увы, но сейчас ВСЁ упирается в деньги! А ведь были времена, когда такие расходы брало на себя государство. Вот и думай, что лучше, социализм, или капитализм, общество созидателей, или общество потребления? Сейчас, когда уже оброс собственными "средствами производства", когда уже четверть века не получаю зарплату, а получаю доход, вроде социализм не сильно привлекает. Но когда задумываешься о дальнейшей перспективе...

These videos really helped understanding how engines work. Aside from that they're just really cool, keep it up!

@Tofupancho

Жыл бұрын

Deceptive editing techniques were used to hide the process of adding several tiny hamsters into the block. If you slow down the video by about 400%, you can hear their faint squeaks.

@magdump4456

Жыл бұрын

@@Tofupancho lmao!

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

A wet liner, wet sump, sidevalve engine. Brilliant. Lap the valves, fix the front seal and a bit of carb work and it should be a winner.

@jasonGreenVw

Жыл бұрын

I'm wondering if it has a crank case breather

@timehunter9467

Жыл бұрын

@@jasonGreenVw I hope so, it’s much closer to a modern ICE than the others we’ve seen. CCV is definitely needed here.

@shaynegadsden

Жыл бұрын

@@jasonGreenVw yes you can see it comes off the lifter cover

This seems like an incredible way to teach young children/ novices or even just people who want to learn the basics of engine mechanics. I mean if you can understand how this works you’ll be less likely to get ripped off by a dodgy mechanic 😂

@dangermode9762

11 ай бұрын

Still they are still ridiculously expensive, so I'd stick to a motorcycle engine, or a lawn mower engine

@rakeshchobe8252

9 ай бұрын

1:02

These tiny engines always suprise me with their build! And so do you!

Such phenomenal toys we have today. When I was a kid I got to play with dirt, bicycle was used for getting to school and back. We used to throw a trash can lid like a frisbee before the frisbee was invented. Built a go-cart, couldn't afford a gasoline engine so we used a electric bench grinder motor. Worked great until the extension cord ran out of range. We only dreamed of stuff like this.

@timothymason6783

Жыл бұрын

Better than an XBox. Kids need to learn stuff

@19099090

Жыл бұрын

Yeah but this is 1000 bucks, 2000 if you get the whole package…

@KazeAkiyama

Жыл бұрын

@@19099090 Buy a car at that price. 😭😭😭

@Alanhock75

Жыл бұрын

You were lucky to have dirt to play with- I got piece of string for Xmas

@chilidog73

Жыл бұрын

Bet you wish you would have thought about that trashcan lid toy a little more. ;)

A wonderful video! No stupid music, just step by step assembly of the engine. Thank you!

That is one of the best sounding miniature engine I’ve ever heard. !

This is the best thing KZread algorithm has ever ever put as a suggestion for me. Thank you!!!!!!! On my way to buy a kit right now!!!

Никогда не ремонтировал двигатели!За несколько минут понял как устроен!Большая вам благодарность!

This knocks the spots of these Toyan engines imo, the wet sump, the plugs etc make it a real 4 stroke. I’d like to see this one in an RC car, being a side valve engine, a body to suit the era of when that engine was in production (1940’s 1950’s) style bodywork.. It’s a shame there’s such a limited run on them, I should imagine that they’d be snapped up!

@ferrumignis

Жыл бұрын

It is a nice engine, but at over $1000 it ought to be.

@ragtimemike2813

Жыл бұрын

Imagine a 1950 scale size ford 8n tractor with this bad boy. Would be a cool rc car.

@BigCool95

Жыл бұрын

I would buy one

@liamwedlake9820

Жыл бұрын

A pietenpol aircamper used a model A engine, I reckon it'd be cool to see it spinning a propeller on a scale model of one. I too was disappointed when I saw that it's only a run of 100.

@bryanharrison3889

Жыл бұрын

The product quality of these engines is atrocious. I wouldn't put such a low quality engine in anything, not even an rc car.

Впервые узнал и увидел...это просто Класс! Удивительно то,что всё миниатюрное..маленькое,а главное что этот двигатель..работает! Спасибо за увиденное чудо! Успехов Вам и здоровья!

This is so impressive. It's like the Rolex of mini engines. I enjoyed this very much.

You probably get quite a bit better behaviour setting the ignition timing to 28 degrees BTDC. This finally looks like an engine that is designed with doing serious runtime in mind, Like the centrifugal cooling pump and the geared oil pump.... Hate the fact that they are belt-driven: No oil pressure alarm, no cooling water temperature alarm, so a snapped belt will lead to near immediate selfdestruction. Solution: place a motion detector on either one of the pumps, that shuts down ignition if no RPM is detected. That will with 100% certainty be an engine saver, because those belts ARE going to snap... The valve adjusters also are most likely going to lead to trouble, and to remove them, the head needs to come off or there is not enough clearance to move the valves.

@ferrumignis

Жыл бұрын

Probably run better with more advance but I bet it becomes hard to start with 28 degrees static advance.

@rigididiot

Жыл бұрын

@@ferrumignis Depends on whether the ignition has an automatic advance curve or not, I guess.

@redneckasmr-xd1gg

Жыл бұрын

timing is based on bore size so that's way too much timing

@rigididiot

Жыл бұрын

@@redneckasmr-xd1gg I can assure you that that is absolutely UNtrue... I run several small gassers (< 3/4" bore) and they all time out optimal at 28 deg BTDS. That is, setting the timing with a full bore running engine and a tach...

@bryanharrison3889

Жыл бұрын

This is just a shitty quality engine overall. Gears suck, etc.... too many cut corners, too low of a build quality, I wouldn't have bothered buying this, much less waste the time putting such a poorly manufactured engine together. Total waste.

I love these mini engines! I think they're so cool!

Fascinating, thanks. I like that it has water cooling too. Amazing! 😊

Mad respect for your manual dexterity!

The I interesting thing about the flathead is that it runs. Nobody should kid themselves that it runs well, or is fuel efficient. Beautifully made model, though... no getting away from that!

Not gonna lie! This thing had the best idle I have heard in a while! It was running bad, I hope you tune it out and show final results! Great video as always Johnny!!

This is truly a collector’s item, good job 👏 👏

Even tho the engine runs bad, its still fun and satisfying to watch this works, i'm so happy to watch this video today

My Dad would of loved this. He was into anything mechanical, especially engines. Thanks for uploading this!

@moshesheckel7369

Жыл бұрын

*would HAVE

@CHEECHMUN

Жыл бұрын

@@moshesheckel7369 Slang used.

my old sailboat has the grown up version of this, they called it an Atomic 4! what a great engine design, 62 years later and still runs like it should.

@myredute

Жыл бұрын

It's actually a 1928 Ford A Model....................94 years old!

I loved building models as a kid but never in my wildest dreams would I have done that one if they even existed 50 years ago. Very cool!! Actually I looked at the prices and even if they did exist my parents would never have bought me one!

@dafonkphenomenal7752

Жыл бұрын

You should please the kid you used to be and buy this motor ( or another ) as soon as possible .

@jeffb8562

Жыл бұрын

Even if it costs three grand and he just changed his hobby halfway through the last one just like the last 20? Maybe to help him pay for it or have him do some work that he can get paid for. You don’t always just buy your kids whatever they want just because they want it. Usually you can pick out the one child kid that always got what he wanted no matter how expensive it was. I don’t think I even have to tell you that it’s good for kids to work towards something nice.

This was mesmerizing to me. Great video. It brings out the gearhead in all of us!

Love these mini engines so much. So cool to see these tiny parts run. 😍

@srauto2727

Жыл бұрын

i love it video this

The alignment and balance of the front pulleys is amazing.

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

Verdaderamente INCREÍBLE. Felicidades 👏 👏 👏

Tudo da par ver que não e tão difícil amontar um motor mais difícil e sempre conserva ele em dias Excelente trabalho 🎸🎸🎸 Brasil BR

I love that it uses crankcase oil instead of premix and actual spark plugs!

@rusty383

Жыл бұрын

Yes! He is ! You should see the real V8s and Power model 3/4 scale Beautiful Car.

@samsilverman824

Жыл бұрын

Jesus is Alive!....Rabbi Tovia Singer is Alive. So is HaShem.

I have only one word to describe this, WOW! My first time here and I’m blown away and have enjoyed watching this short more than I could imagine. Keep up the great work.

@tommybinson

11 ай бұрын

Me too. Great miniaturisation.😊

what a engineering bro!! The video is for just 15 minutes bt your hardworking is hidden! Lots of love from Bangladesh. ❤️❤️

Finally an engine with its own oil !!! I’ve waited ages to see this!!!

Should definitely make some clear covers for the side of the block so you can see the crank and valve springs :)

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

@mikepurdue7472

Жыл бұрын

@@dove3853 And Jesus also gave us V8 POWER! 💪

Супер! Молодцы! Отличная вещь!

I really enjoy watching i'm now on my basic training as a mechanic very nice one I can say

I'm not an engine person at all, but this is pretty freaking awesome!

Great video brother. This engine looks impressive apart from the leaks. The brushed starter motor always is a problem.

@michaeljucius9509

Жыл бұрын

brushed? why should that be a problem? have you ever opened a real starter?

Just by watching this video and a couple of your other videos, I can now certify myself as a mechanic.

@onomejames7137

Жыл бұрын

Hi please where can I get the mini engine to buy

@onomejames7137

Жыл бұрын

Hi please send me the address where I can get the mini engine to buy

I was amazed. miniature like this is so rare. Thanks for sharing this.

Such an awesome piece! Love the content, keep it up!!!

Awesome content! Your videos are always so pleasant to watch! 😀 When assembling this engines, you think you could, somehow, make the way the fluids and gases flow through the engine clearer? 😁😁😁 Although you said it runs bad, I loved the sound and the look of the engine. Thanks for showing it!

Perfect engine! Now get the car and the action figure 😁

It is so helpful and educational how components of an engine assembled in a very vivid way

Simplesmente linda obra de arte

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

I'd like to see more builds for or with these engines (like the cars or mini chainsaws, or perhaps a mini supercharger would be cool).

Actually works.. Just disable the real time protection in Setting. Wasnt sure that it would work .Awesome bruh..

Anyone notice how normal sized the parts look until his hands are in the way? Pressing the wrist pins got me. Great video. Loved every second.

The engineering of these mini kits is incredible...👍👍👍

Too cool! I love it. I did assembling a plastic model back in the 80 but this one is one the best.

@davalleyguy5020

Жыл бұрын

I had one too. This beats all!

Wow i never knew this was a real thing? I'm sold!

Extraordinaire !!!!!!! Superbe boulot!!!

I would love to get a kit like that and put together an engine. At 11:25 I think it was, when you put the side crankcase covers on.. I let put an awww, when I saw they weren't see through. That would be an awesome improvement imo.

I think putting together this miniature would make me feel like I could conquer an actual size one.

@davelowets

Жыл бұрын

Not a whole lot of difference... 🤷🏻

@jimboreaddabible777

Жыл бұрын

@@davelowets Well..... Torque specs and if the miniature doesn't work.... Oh well. If the real thing doesn't work..... Oh crap!

@davelowets

Жыл бұрын

@@jimboreaddabible777 True, true... 🍻

@vigneshwaranvignesh4942

Жыл бұрын

What is the use this

@davelowets

Жыл бұрын

@@vigneshwaranvignesh4942 Because he can...

This is something that EVERYBODY must experience in school, university, as a personal hobby, collectionist or educator. This is top learning with a 'toy' that IS NOT a toy. This gives a clean idea what technology is. I could simply assemble it and have it as a decoration piece that is dismountable or make it WORK as a classical engine. I can't explain how important this is. Schools must provide these experiences, with lego, THIS, block bending, block motors from lego and all other things. Learning should be FUN again. Yeah, make learning FUN agan. :3

Neat engine, crazy impressive skills!

Yo i like how the bearings are kept from spinning in place, theoretically, by some sort of hardware. Im sure some ungodly amount of torque can get them to spin but this will help prevent that. 🤘🏽✌🏽👍🏽 awesome vid as always

@davelowets

Жыл бұрын

The bearings in EVERY other engine are held in place also. 😴

@tomaslongoria2449

Жыл бұрын

@@davelowets with hardware directly on the bearing? Maybe hard wear holding a bracket that holds the bearing, but im talking about a bolt in direct contact to the casing of the bearing itself like in this engine in this video. Yea some engines do have that but not every engine.

@davelowets

Жыл бұрын

@@tomaslongoria2449 I'm not a big fan of screwing the end of a fastener into the side of a bearing race to hold it in place. The race of the bearing can easily be crushed out of round by a fastener that's a touch too long, or by too much torque on the fastener. I prefer the normal way with split bearing shells with tangs on them to keep them from spinning in tje housing.

That is probably the coolest thing I’ve ever seen and now I want one. I also wonder if they make them in diesels 😯

soone who does not get complex instructions like..At all, tNice tutorials was simple and clear for to understand. Thanks dude.

Very nice, very impressed by your editing and the beauty of the engine.

These engines look so satisfying to build, might have to get one

@frostbite1991

Жыл бұрын

you can buy real car engines for less than these kits lol

It really looks like your coolant stopped flowing and was boiling in the engine toward the end there. That pump might not be spinning fast enough/got airlocked at some point.

TNice tutorials is just the pick up I needed, thanks man

Lo felicito mientras más pequeño más difícil y más grande más fácil aparte de la tecnología qué belleza

Interesting the differences between this and the Toyan engines, I wonder why they went with a flathead design? Normally flatheads aren't stellar for power or efficiency, but it probably will run for a very long time! I really appreciate that this has actual spark plugs and ignition system, as well as an oil system, pretty cool! I hope you can get it running proper. Looks like there might be some design improvements to be made.

@ferrumignis

Жыл бұрын

Simplicity and manufacturing cost I suspect. OHV adds significant complexity.

@muskokamike127

Жыл бұрын

they make all kinds, this is just one engine they make.

I would just like to mention, great build, but because you have set the spark plugs to 15* before tdc, the engine has low rpm and misfires, as you can see from the exhaust, flat head engines are meant to have around 4*-10* before tdc. But still, great build.

This has to be the coolest thing ever.

Amazing, truly amazing!

These are so much fun to watch. I learn so much. Plus I like when you machine your own awesome parts. I'm also still excited to see what you do with the V8 . Having a nitro RC car since I was a kid. I think the Schumacher 21 on road/off road truck. I haven't messed with it in years, since my uncle passed. He's the one that had gotten me into this and knew everything about it. I always say he would have LOVED this channel and probably would try to shove one of these huge motors like you did lol. Take care buddy, can't wait to see what you do next

Another great tiny engine build Johnny could you make a pulley and bracket for a DC generator or an alternator to power the engine so it's not entirely relying on the battery to keep running?

@dove3853

Жыл бұрын

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

@DeckardsDream

Жыл бұрын

@@dove3853 bruh

The miracle one💪 I learned a lots

Man i can't wait to get me one and put it together this would so help my mental health 👍

Hey Johnny, Hadn't seen you for a few weeks, perhaps. Good to see another miniature engine coming together. But I wanted to ask, is that brand Cison any good? Unless lapping the valves isn't an option, it was sounding kind of rough. Anyhow, good to see you back. 🏎

@moshesheckel7369

Жыл бұрын

Any good? Leaking from front seal, starter motor dead, engine runs rough.... sounds like crap to me!

Ever thought about making a mini muffler/fart can and exhaust system to make one of these sound different? Sounds like an open header 4 cylinder but if you threw some small scale back pressure with a longer exhaust at it would it sound like a legendary 4 cylinder engine? Could probably even make a tiny bov for the boosted ones.

@rubiconnn

Жыл бұрын

Why go through all that effort to make it sound like shit?

@PaintHerWhite

Жыл бұрын

@@rubiconnn Your opinion is stupid and worthless.

Incredible!🤌❤️

Impressive how clean and smooth these small engines run.

That's a nice little engine, right up my street! There's a much better way to set the timing though, as finding TDC with a clock like that isn't the greatest, and could easily be a few degrees off. Use a degree-wheel on the crankshaft, and a pointer, zero the pointer with the piston 5mm or so down from TDC, the rotate the crankshaft backwards until the piston has gone down and back up again to 5mm from TDC, read the angle, then turn the crank until it's halfway between the angles you've measured, et voila! accurate TDC (or BDC if needed). it's way simpler than I made it sound though!

That is a cool engine kit. Is that for display purposes or is there an actual application for it's use?

Looks like there was space for oil ring's. Amazing job by the way

Me quito el sombrero. Es un Genio es Digno de Almiracion

Impressed by the fact it uses metal or "real" piston rings, not to mention two of them per piston. Ive seen some of these small engines that use an oring for a piston ring...heck nitro rc engines, which is what I have a few years of experience with, don't even have piston rings of any kind

@stevecollins2981

Жыл бұрын

Some have rings and some don't. Depending on the type of nitro R/C engine.

Love that engine, I want one

@rizkiokta5634

Жыл бұрын

Good

@pokellector_nl6712

Жыл бұрын

@@rizkiokta5634what good? Stfu man

@viktorsch5452

Жыл бұрын

Где такой купить

So thankful for this

works, keep up the good work man

Would this be a viable engine swap for my miata? I have a feeling it might be too big.

@GeneralChangOfDanang

Жыл бұрын

Too small for a Miata but perfect for a Civic.

@justforever96

Жыл бұрын

Hah? Hah?

Reroute the exhaust up, and put clear parts on the lifter and crank doors. Also this engines looks like it needs a turbo or a super charger.😎

Impressive is an understatement !! Wow.... 👌👏👏

Wow that was very enjoyable, I was excited when you started it. 😮😮It was the only part i was looking forward to the most. Keep up the good work!

@sultanalnaqbi1975

Жыл бұрын

PS: big fan from UAE!

love the Assembly videos, is it running on "normal" gas?

@johnnyq90

Жыл бұрын

Yes, and I used 95 octane.

@craigalston2208

Жыл бұрын

@@johnnyq90 how much do these engines cost and where can I buy one ?

Интересно на что ставятся такие миниатюрные двигатели?

@Valentin_I

Жыл бұрын

на полку)