Love this comparison vid between different chassis’! Looking forward to the next ones with different layouts!

@Z3NBluster

6 жыл бұрын

Jermeister Next one is at DXN Provisions.

Thank you, thank you!. already had 2 type of chassis. getting the AR next

great video man. want more videos like this :)

Thanks dito, Mr. Z3n. Next track na!

ito ang matagal ko ng inaantay, salamat sir

@Z3NBluster

6 жыл бұрын

Meron pa na susunod na race. Mas technical na track in the future.

@edwardjames6880

6 жыл бұрын

whoa pinoy pala. Uso pa pala ito, big fan ako hehe

woooohoo ive waited for this!

@Z3NBluster

6 жыл бұрын

More tracks to race on in the future.

@nerbs6125

6 жыл бұрын

is the Hard + superhard tire combination for the AR really that decisive or were there other factors about the build?

Great video! AR for the win!

For all 3 chassis you use, which motor do you use for all 3 chassis?

I recently purchased a Super Avante III Special because I liked the chassis. It was something I've never seen before.

@Z3NBluster

5 жыл бұрын

Super Avanter III Special? That doesn't sound familiar to me at all.

This helped a lot

nice race !!! hope you can make basic builds for old kits like super x chassis or xx. :)

Sabi na nga filipino ka 😁 Dami ko natutunan about sa tamiya....dahil sayo sir 😀

What's the difference between tuned class cars and Speed tech class cars?

great videos keep it up, have you ever considered building up an ar chassis without a propeller shaft so that only 2 wheels only will be running in order to fix the transmission issues and will this setup has any sode effects?

@Z3NBluster

5 жыл бұрын

It's against the rules to use 2 Wheel Drive. The car must be running 4 Wheel Drive :(

@karimessam6003

5 жыл бұрын

Z3N Bluster thanks alot, do you have any ideas to solve the transmission problem for the ar chassis?

geez, this room is nice, so big

@Z3NBluster

6 жыл бұрын

Yeah, we are lucky to have Justin as a host.

sir 2019 MA AR FM-A setup update meron na po ba? dami ko natutunan thanks!

Hello zen, i like watch this video. I think the setup that is installed in AR cannot be applied to the MA or FMA. Because their engine positions are different. So that the position of the damper or ballast cannot be equated. I have a suggestion, you should check the balance first, before they are run by looking at the weight of the back or front by placing the position of the car with a ruler in the middle. At the end, they will run together

Which chassis do you think is best for speed layouts? MA, AR, FMA or Super 2?

@Z3NBluster

6 жыл бұрын

What do you mean by speed layouts? No slopes or any type of jumps?

@johnw2418

6 жыл бұрын

Z3N Bluster yes, without slopes or jumps. Just banks and possibly lane changer

@Z3NBluster

6 жыл бұрын

Among those 4 you mentioned, Super 2. But if you can learn how to set it up, VS is the best in pure high speed.

hi, may i ask, what's the name of the cowl in red?

@Z3NBluster

5 жыл бұрын

Avante Mk. 2 Clear Body.

What engine you used for the AR chassis? Thankd

@Z3NBluster

5 жыл бұрын

Bosing, they aren't called Engines. They're called Motors. I used a Torque Tuned 2 on the AR.

does the AR basic tune up kit compatible with MA chassis? TIA.

@Z3NBluster

5 жыл бұрын

Yeah.

hy zen, can i use hyper dash 3 motor for this modification models (basic tuned setup) ?

@Z3NBluster

5 жыл бұрын

You can but you'll have to change the front underguard design to accommodate front brakes. The extra power that the hyper has will need more braking power.

@yanbagusas8671

5 жыл бұрын

@@Z3NBluster by adding a brake foam ?

Hi! What are the motors used in this test?

@Z3NBluster

6 жыл бұрын

Torque Tuned 2. These cars are built for Tuned Class. So the motors are limited to Torque Tuned, Atomic Tuned, and Rev Tuned variants.

What is the setting of your AR? And upgrades. Thanks

@Z3NBluster

5 жыл бұрын

Watach my video in the, "Tamiya Mini 4WD Build" playlist in my channel. The title is AR Chassis Basic Build.

Man i wish i lived close to you.

@Z3NBluster

6 жыл бұрын

onikuy Yeah, I'm fortunate we have DXNProvisions, The Dojo, and Ultimate Hobbies.

AR lover here..

Vs chassis is the best for speed tech or depends what set up you have its all about tuning and combination

@Z3NBluster

6 жыл бұрын

MR'BASS MARC It varies depending on the track. But, VS does have the most Japan Cup 1st Place finishes. Although, last year in the Japan Cup it was dominated by MS. It also looks this year MS is winning again.

@mrbassmarc6715

6 жыл бұрын

Z3N Bluster i quit playing tamiya since 2012 i play tamiya since 2002 and i dint have idea about tamiya scene now all i know is i used vs as speed tech and for super highspeed category

@Z3NBluster

6 жыл бұрын

MR'BASS MARC Well, maybe you should race again. The hobby is very different now from 6 years ago.

@mrbassmarc6715

6 жыл бұрын

Z3N Bluster i need a racetrack first and i dont know if i can get my favorite chassi and parts

Whats with the red thing in the rear damper? What is it called Newbie here

@Z3NBluster

5 жыл бұрын

Those are originally parts from Dangun Racers from back in the day. They're called the, "adjusters." You put them on the Ball Connectors. Part number 95387

Hii Zen nice to watched your video,I was have experiance about MA,that try to move block damper to in the front that will hold your MA after landing nicely, sory just shere my experiance 😁👍

hello po beginner here tanong lang po..... maganda po ba pang highspeed ung torque tuned for ma chassis tapos naka small diameter na tires? love from ph.....

@Z3NBluster

5 жыл бұрын

It depends on the High Speed Class. The High Speed Class we have here are limited to Tuned Motors. Look at my High Speed Super 2 video. IF you're going for purely high speed motor use Ultra Dash or Jet Dash for single shaft or Mach Dash Pro for Doubleshaft motors.

Sir may i ask ano po ung tires na ginamit nyo sa AR? thnx idol

@Z3NBluster

5 жыл бұрын

Watch my AR Chassis Basic Build video series. Look for it in my playlist called Tamiya Mini 4WD Build.

Is there an upside to making the front underguards so low? They seem to only slow down the car.

@Z3NBluster

5 жыл бұрын

That's what it's supposed to do. They're there to help the car slow down before a slope. You can certainly try and remove them if you want to go faster from a slope.

@toondoesthings

5 жыл бұрын

@@Z3NBlusterOoh. I thought it was for impact protection somehow. It sure beats having to build a front brake system.

@Z3NBluster

5 жыл бұрын

It also helps guide the car back into the track sometimes. It also helps prevent screws in the front bumper mount from catching. Build and tune your car to whatever track is in front of you, if you need to create front break mounts to slow down your car even further, do it.

@toondoesthings

5 жыл бұрын

I actually tried to run multiple iterations to test it out, underguard set only, underguard with plate, bare plate (countersunk of course) and no underguard at all. Sidenote: Do you think the reason that of the 3 starter pack kits, only the MA kit has this part included because of the relatively weak front bumper?

Zen what your from country?

Yess! AR4LYF, YO!

Tanong Lang po... Uhm?? Dapat ko po ba i-trim ung tire ko Kasi hnd fit sa chassis cover ko.. sumasayad... Nagpalit po Kasi ako ng tire at rim.. bale sa pro stock po Yun... Kung pupuwede

@Z3NBluster

5 жыл бұрын

I don't race Prostock. You need to first analyze why you have a fit issue before you start cutting. I honestly can't picture what your issue is. That's why I stick mainly with Buggy Bodies. There are alot less fit problems when you have so much clearance with smaller bodies. Also I don't race "ProStock"

@kurtlevicabuyao2676

5 жыл бұрын

@@Z3NBluster ok sir.. thank... I stay tunned... More videos pls

Is fm chassis corners faster than any other chassis?

@Z3NBluster

6 жыл бұрын

Nope

Pasensya sa tanong ko sir. Kung pro stock po sa tatlo. Saan sa tatlo kaya ang lamang? Ty po

@Z3NBluster

5 жыл бұрын

I don't race pro stock. Speedwise MA should have the upper-hand, but sometimes it has weird bounces. So like in the video, I'd use AR.

@keithbelano6042

5 жыл бұрын

Thannk for the reply sir. Continue to share your knowledge and more power

Hey man how about Super 2 Chassis? And where can I buy a racetrack like that? thanks

@Z3NBluster

5 жыл бұрын

Super 2 Chassis is going to have a separate Advanced Build video for it. It will not be Tuned Class like these cars. The way we got our 5-lane here was direct from Tamiya USA. You'll have to ask your local hobbyshops if you really want to buy 5-lane Tamiya tracks.

@venczchannel

5 жыл бұрын

Thanks for the fast reply. man .. I guess I have to ask for it then ..new subscriber my man I'm back at racing , I'm ordering a Beak spider Premium with a super 2 chassis guess I need more information about this chassis setup..Because someone says this days the dominating chassis is the AR, VS and FM-A ..

@Z3NBluster

5 жыл бұрын

MS is actually the most dominant chassis around the world because of the MS Suspension setup.

What's the best motor for Speed tech?

@Z3NBluster

5 жыл бұрын

There is no best motor. It depends mostly on the track and your car and how well it is built.

Bruhh, that Gun Bluster suddenly speed up on the 2nd race! Uncle Rex power? 😁

@Z3NBluster

6 жыл бұрын

Roscoe Channel Lol, I'll tell Rex you called him, "Uncle." I think it might be as fast as the AR setup. I'm running more races at DXN next time on a more technical track.

@roscoechannel

6 жыл бұрын

Z3N Bluster 😁😁😁 all right! Happy to see u and Mad Tang start making tutorial & racing videos again! 👍

@Z3NBluster

6 жыл бұрын

Roscoe Channel Yes, you too man. Keep on keeping on.

hi sir ask ko lang kung ano po use nung three point attachment sa baba ng frp sa front

@Z3NBluster

5 жыл бұрын

3pt Attachment? I didn't use any 3pt attachment on any of these builds...

@errolrieugegarcia4726

5 жыл бұрын

sorry i mean the underguard

@Z3NBluster

5 жыл бұрын

@@errolrieugegarcia4726 It's a guard, for the underside. If you look at the top Carbon plate, the screws heads underneath can sometimes catch on the track walls. Underguard prevent that from happening. It also helps maximize the effectiveness of brakes, whether you use just rear brakes or also mount front brakes as well.

@errolrieugegarcia4726

5 жыл бұрын

@z3n Bluster thank you for the info medyo nawawalan nakasi ako ng pag asa sa fm-a ko everytime I make a practice run on racetracks it always fly out

how much would u sell the AR?

@Z3NBluster

5 жыл бұрын

Not for sale.

What's the name of the red one?

@Z3NBluster

5 жыл бұрын

Of the body?

Mybe good.

ano po suggestion niyo na chassis para sa beginner

@Z3NBluster

5 жыл бұрын

These three chassis would work well for beginners.

Sir, speed set up naman , building tsaka testing. Hehehe

@Z3NBluster

6 жыл бұрын

Speed Setup? High Speed? Mahirap itesting yan at hindi masyado sikat ang high speed dito. Kailangan ko i cumbinse and DXN Provision magbuo ng track.

@akocmamo5772

6 жыл бұрын

Z3N Bluster build ka nlng po. Hirap kac makopya pag picture lng basehan. Highspeed racer ako. Pero old skul built yung alam ko

I want one! Can i purchase or ask to u build 1 for me?

@Z3NBluster

5 жыл бұрын

I am a racer, not a seller. Sorry.

Sir zen pwede pa show how to build this??parts use

@Z3NBluster

5 жыл бұрын

Look in my build videos. Each of these cars have build videos in my Tamiya Mini 4WD Build playlist.

what motor did you use for the AR?

@Z3NBluster

5 жыл бұрын

I said it in the beginning of the video.

AR power!

Bro the content is great but why is there an unconscious dude on the track lmao

bakit po ba mukhang hindi uso yung spoilers sa mini 4wd?

@Z3NBluster

5 жыл бұрын

It doesn't do anything unless the cars are going really fast.

@NatNetNitNotNut

5 жыл бұрын

@@Z3NBluster I see. I love mini 4wds because they are part of my childhood but I don't like how in races spoilers are removed it hurts my eyes lol

Lakas humatak Ng fma, nice

@pritongkangkong96

5 жыл бұрын

Gertie Ryan Sancha plano ko nga bumili ng rowdy bull starter pack

Those cares have a battery right??

@Z3NBluster

4 жыл бұрын

Two AA batteries.

3:43 madtang be like : somebody kill me

Anu po motor ng AR

@Z3NBluster

6 жыл бұрын

mark kevin miniano I said it in the video. And they're all running the same motor.

so chance wins?

Put a part list please.

@paulcussler8629

4 жыл бұрын

Or build list

@Z3NBluster

4 жыл бұрын

The parts are in part 1 of the AR Chassis Basic Build video. Part 1 of the MA Chassis Basic Build video. Part 1 of the FM-A Chassis Basic Build video. Watch the intro of each video, I go over each part there.

pwede b makabili ng set up mo?

@Z3NBluster

5 жыл бұрын

I'm not a seller bosing.

OMG

boss subscribed po kita gusto ko yung build mo sa ar. pwd mo po i share paano yan?

@Z3NBluster

5 жыл бұрын

Look for a video in my playlist, "Tamiya Mini 4WD Build," that is called, "AR Chassis Basic Build Part 1" And there's also a part 2 called "AR Chassis Basic Build Part 2."

Depende siguro kung sino mag setup niyan

@Z3NBluster

6 жыл бұрын

Sofronio Mina For sure. Change the setup to suit the track. Rinace ko sila mostly with their original configuration in their original build videos para ma compare. Next track baka MA ang may advantage.

lupit din nung afm

@Z3NBluster

6 жыл бұрын

AFM?

Sir pa build po.

@Z3NBluster

6 жыл бұрын

I have build videos of all three cars. I don't understand what you're asking or saying.

⭐⭐⭐⭐⭐

Nawawalan ako ng pagasa sa MA ko ah 😭

@ca2518

5 жыл бұрын

Haha same

hi

was that guy sleeping

@Z3NBluster

3 жыл бұрын

He died.

Pinoy ka kuya?

@Z3NBluster

6 жыл бұрын

Yes bosing.

@kissbandit

6 жыл бұрын

sige po susubscribe na ako hehe.

hey sir can i have some of your tams i would really love it ive been watching your vid since 2016 til now i only have one tams whch is a prostock one and i dont have much to be able to build speed tech btw pinoy ako idol

Hindi ko alam na maruong ka sa tagalog sir😂

@Z3NBluster

6 жыл бұрын

Robert Go Kunwari Lang Yan. Magaling ako sa Google Translate. Joke lang. Haha.

Can, you do, a giveaway

@Z3NBluster

6 жыл бұрын

I can.

@bobzeus3567

6 жыл бұрын

Z3N Bluster thanks but win

is that guy dead or sleep ? hahaha

@Z3NBluster

5 жыл бұрын

Yes

lol mad tang died

Kala ko korean kau

@Z3NBluster

5 жыл бұрын

Nye

Too slow