【ミニ四駆】Tamiya Mini 4WD Build: VZ Chassis Tuned Class Build
In this video, we build a VZ Chassis Tuned Class Car. This car is for sale at bit.ly/2ZjOJ3a
USE DISCOUNT CODE "Z3NBLUSTER" TO SAVE 10% ON SHOP.MASSDAMPER.JP PURCHASES!!!
Shop
dxnprovisions.com/
Apparel and Swag
massdamper.jp
Accessories
blackfabrica.com/
Forums
www.m4race.com
Пікірлер: 195
Just watch your video. It's poison dude! Many - many years i stop playing this mini 4wd. Now i wanna have one again🥺
I hope this helps. PARTS LIST: 18094 NEO-VQS 95555 2mm Aluminum Lock Nuts 15484 Torque Tuned 2 Motor 94389 Ball Bearing Set 15519 HG Round Hole Ball Bearings 95347 17mm Aluminum Rollers 95513 19mm Aluminum Ball-race Rollers 95539 HG Lightweight 19mm Aluminum BR Rollers 95541 HG 19mm Tapered Aluminum BR Rollers 15242 FRP Plate - Super X 15459 Side Mass Damper set 15205 1.4mm Hollow Propeller Shaft 15297 72mm Hollow Stainless Steel Shafts 95133 HG Carbon Rear Brake Stay 1.5mm 15499 HG Carbon Wide Rear Plate 1.5mm 95131 HG Carbon Multi-roller Setting Stay 95323 Super Hard Low-Profile Tire 15358 Low-Height Tire and Wheel Set 15400 Flourine Coated Gear Shaft Ribbed 94768 Bearing Roller Spacer 94381 Spring Caps 10305 Mini 4WD Sliding Damper Spring Set 15473 Aluminum Spacer Set 15454 2mm Cap Screw Set 15527 Stainless Steel Countersunk Screw Set (10/12/20/25/30mm) 15510 Stainless Steel Countersunk Screw Set (6/8/15mm)
@bangmarzoom1978
2 жыл бұрын
u r great bro.. thanks
@locl-onid
Жыл бұрын
wallet balance = 0
@nicsnicsnics9560
Жыл бұрын
Product code po ba yan?
@surup1919
9 ай бұрын
thanks bro
@kyoyahibari2118
2 ай бұрын
You are a real man
Wow clean build... Hopefully you do other type like this video
..a very long time race that i hav been left..now watching this..im starting to look back at my home store full of hidden Tamiya gems😆😆😆
This was fascinating for me. I used to race these cars in the early 1990s. It looks like the tech and knowledge in this area has improved enormously since our early days racing them.
@VestedUTuber
7 ай бұрын
A lot of it trickled in from the RC racing scene.
i remember back then my male cousin is really into tamiya... i think this will be good gift for boys to give car,robot,etc will be good gift for boys doll,doll houses,and something cute will be good gift for girl hopefully my little boys and my little girl will be like it!
Thank you so much for sharing this awesome build. Learnt so much ;)
this is no a tuned class build.. this is an art
It's great fun building a VZ chassis like this because it doesn't cut the FRP which makes it difficult for novice builders who enter the STO class
Awesome...👍👍👍
I remember racing these when I was a kid in Michigan at the riders hobby down the block from my house
@tomgjonaj9965
2 жыл бұрын
Which riders? I grew up in the Novi area and we had a few around here but they are all gone now
@engineer1569
2 жыл бұрын
@@tomgjonaj9965 in Ypsilanti off elsworth
Amazing bro 🤩
Dammit i miss it! 😢 please put more build for sale!
Thanks man!😊
Amazing
Amazing bro...
good job
Nakaka miss itong tamiya
Hi @Z3N Bluster just wanted to ask if the spring supported rear set up that you did on the video been proven effective on the track? If yes, i will also adapt this in my own rear frp set up..
Good looking 👍👍👍👍
I miss playing Tamiya 😢
Can you do one with super II chassis? I’m new to this, and I have a super II chassis in hand, want to know what parts should to get for building. Thanks
Wow over 270dollars for a chassis like this? I remember I used to watch an Anime series dedicated to these mini 4wd Racing, incredible that they are still in production and they are more sophisticated than I remember when I was very young.
@BlackOilyMenKissing
Жыл бұрын
270 is nothing compared to what your machine will win for you
@ripmax333
Жыл бұрын
@@BlackOilyMenKissing how much do you win?
@BlackOilyMenKissing
Жыл бұрын
@@ripmax333 more than what I initially spent for my machines, but I don’t really count it anymore since I just want to have fun and compete with other racers
This is so helpful 👊 what do you call the tool that youre using to hold the bearing?
Love from Las Vegas. We have a track here on jones boulevard. Talk to Jasper. Be sure to stop by!
In this setting carbon fibers are hitting in wave sections. Test yourself. Since you are using only the 19 mm roller holes, you should shift to shorter carbon fibers.
40 minutes timelapse video and voice over what an effort to make this video
Awesome vids I have learnt alot from your vids. Do u prefer oil or grease in the transmission and if it's oil what oil do u recommend
@liamandgavinjamili3073
2 жыл бұрын
Try use gear oil for scooter motorcycle verry smooth
What are the 2 mounting hole for ~ in front of the battery clip
is it legal to use spring on the rear bumper to make some gimmicks for tuned class race?
Hey boss can you build another one like this for sale?? Thank you hope ASAP
Those side damper gonna break easily on VZ, you must reinforced it
Can you please build more bro? And have some sample run after building thank you bro
@Z3NBluster
3 жыл бұрын
Its for sale so I don't wanna risk damaging the car before shipping it out.
I am new to mini 4wd and I am considering what chasis to buy, I have three chasis in mind, ms, ar, and vz. I know currently most recommended would be ms, but I am also interested in vz, since it is an upgraded version of vs, and vs was considered to be the fastest chasis there. I am also interested in ar, since it is related to air dynamic, but i am not sure if it works or not, so do you have any suggestions?
@Z3NBluster
3 жыл бұрын
If you're new to Mini 4WD. I don't recommend MS. Its an older chassis. Less bolt on mount right from the beginning. I would relegate your choices, to MA, AR, VZ, and FM-A.
@jackchen5918
3 жыл бұрын
@@Z3NBluster thank you
Would love to try this build, minus the aligning tools.
nice build kuya zen
@user-ld5xq7ff7y
3 жыл бұрын
Baka nakalimutang mag Tagalog
@Z3NBluster
3 жыл бұрын
Sino nakalimot mag Tagalog? Misspelled niya ang palayaw ko, siyempre isnabin ko siya!
@user-ld5xq7ff7y
3 жыл бұрын
So sir sorry naman kala ko naman nalimutan nyo
Holy sjit, I didn't even realize the wheels were spinning until 01:05 I must be really fucking high or that thing has incredible power! Then again...it is entirely possible that both scenarios could be true.
@Z3NBluster
2 жыл бұрын
YES
@42:48 there's a crack at the chassis's front bumper :D
Hi Sir Zen! I'm a fan of yours. I would like to know if the Cyclone Magnum cowl can be fit into VZ chassis? Thanks!
Can this kit be placed in a super fm-a brocken?
Está muy padre
Make video like this for MS and super 2
Is using spring on rear allowed on b-max class?
What size contersink are you using? Im not sure if 4.5mm will do the job?
Hey bro, May I ask what is the point of installing the wheels facing on the other way? And is it okay to install it normally when it comes to BMAX or does it have any advantage when installing it facing the other way?
What is the advantage of piercing the wheel?
We need some 2023 videos! Lfg!!!
is the VS Chasis Steering System compatible to VZ Chasis?
Hi Jan! I tried using the 620 ball bearings for the wheel axles but it seems that they are too thick and is rubbing with the wheels when installed with 60mm shafts. Tried this both on MA and VZ and both are the same. Any thoughts?
@Z3NBluster
2 жыл бұрын
Did you watch the build video thoroughly? Watch the section where I post the parts list. You'll see the difference between your build and mine.
@stephenpascua9792
2 жыл бұрын
@@Z3NBluster yes I did. You used HG bearings for the wheel shafts and 620s for the countergear. I also watched your MA build and as far as I can recall, you used 620s for the wheels.
@FinalVibes
2 жыл бұрын
@@stephenpascua9792 use 72mm
What's the name of the anime where they use this beautiful piece of art?
very nice.... do you have vid for TMAC setup??
@Z3NBluster
3 жыл бұрын
No.
I need to get that tool for the wheel, I think that is why my wheels are flying off after like 6 laps or so on my MS. I need to find a way to line up the shaft perfectly in the hex shape provision in the wheel. That would be the hardest part of the built for me. Apparently I have been doing the wheels wrong all my life.
@Z3NBluster
2 жыл бұрын
Wheel Installers are a Life Saver
@majdal6657
2 жыл бұрын
Mssss
can you make a tutorial how to break in motors
wow u have a nice website
Which chassis is better? For open class?
What 17:01 asked for.. rotor spacers?? any item code for this stuff?
hi sir! just wanted to ask, what were the products that you were using to clean the 620 bearings? if you can provide the brands too, that'd be awesome. i'm new to the hobby and would like to know the basics in cleaning the bearings, rollers and motors. mad respect! thank you.
@atxm3963
6 ай бұрын
I think he used lighter fluid
Starting this hobby requires 10k pesos for everything. But that's just 1 raceable unit. The tools are also very expensive. Why don't they make the tools cheaper for everyone to enjoy? Even if the parts are expensive, people will still buy it to race and have fun.
SULAWESI TENGAH HADIR KI
❤💪
Are super chassis outdated or not good nowadays?
Hey Z3n, which one should i build first, my AR or VZ? Plss reply 😁
@Abiee69
3 жыл бұрын
Sad life😂😂
Is it okay if i don't counter sink the bumpers? I don't have the tool to do so 😥
@TomatoTomato911
3 жыл бұрын
Imo should be ok but the screwheads will protrude out but you have slightly lower cg too. Only issue is if your car is too low it doesnt have enough clearance that you need to countersink it. Im not sure if countersink weakens the hole as the area around the screw becomes thinner.
I know this is an old video..but just asking if you’re still building for customers as to this date? I’m interested and located in New Jersey...not sure if you are located to here in the U.S.
@heheyeaaboii4358
3 жыл бұрын
Hello john, do you still interested to get a pro build? Im thinking abt retiring in mini 4wd world and want to sell some of my unused/rarely used cars,but mostly they are MS chasis with suspension with HG carbon and some FMA chasis. If you interested you can reply to this comment and i will upload a video of my cars and send you the link, cheers:)
How can I get in touch if I want to buy a ready to race kit?
@Z3N Bluster Hi, just wondering if this rear bumper setup with the springs is allowed in bmax. Can't seem to find rules for it.
@SenselessTalk
6 ай бұрын
Nah its not allowed, also this build is slow. Don't copy his builds.
@razznikackerman5801
27 күн бұрын
@@SenselessTalk didnt even raced him yet, wdym?? Bet u can't even build one that can beat him
Ang talino ng taong eto
Can you build my first model if I visit the store?
is this allowed in b-max category thanks
Is this build setup still available for sale? Coz I can't seem to find it in your dxn link..
@Z3NBluster
2 жыл бұрын
Sold Out
Are the wheels balanced?
What oil you’re using ..? I saw you took out tamiya bottle it look fluorescent yellow colour.
@Z3NBluster
3 жыл бұрын
Secret Sauce ;)
Is it possible to get one built by you ?
Kuya!! Sg scene dying already x.x
Can I buy this pre packaged as a complete kit on your site?
@youlikeanh
3 жыл бұрын
Not prebuilt but as an unbuilt package
@Z3NBluster
3 жыл бұрын
Good Question. I'll bring it up with DXN.
Hey uh. Just wondering. Is it possible to replace the rear roller stay with FRP one?
@Z3NBluster
3 жыл бұрын
It is. But I don't recommend it. The spring mounting point screws will cut through FRP and eventually break. The carbon plates holes will widen but will generally not break unless you get into very forceful crash.
@balerino6983
3 жыл бұрын
@@Z3NBluster thanks. I’m trying to figure out my VZ setting since Indo organizers don’t allow HG stays on their tuned class.
Goodday sir where did you buy your item in the US or what is the site you order for your spare parts in tamiya because I’m here in Miami Florida where can I order a spare parts for tamiya here thank you and god bless
@Z3NBluster
2 жыл бұрын
The link for dxnprovisions are in the video description.
is this, still available until now?, i really thought it was faced out since 2004.
@Z3NBluster
2 жыл бұрын
What was phased out in 2004?
I am Arturo Cesar, I live in Mexico City. I just saw the video of the VZ chassis modification. I would like to know if there is a possibility that you can make me one like it and send it to me? and how much will it cost me?
@Z3NBluster
3 жыл бұрын
Sorry, sold already
@heheyeaaboii4358
3 жыл бұрын
Hey arturo, do you still want a pro build mini 4wd,im thinking abt retiring from this and probably want to sell some of my unused cars,but mostly they are MS flexible chasis with suspension and FMA chasis, if you interested you can reply this message and i will send you a link to a video of my cars, cheers:)
@arturocesarramirezmartinez8456
3 жыл бұрын
@@heheyeaaboii4358 Thank you very much for your reply. How sad to see that you are already leaving the hobbie and if you send me the link to see your designs and see if any of them interest me. Greetings from Mexico City
@heheyeaaboii4358
3 жыл бұрын
@@arturocesarramirezmartinez8456 if you need more details or question feel free to ask me in the comment section :) See you there
what is the price for 1 complete unit?
Hi, does your website ships in UAE?
Do you sell customized Tuned mini 4wd ?
Try using the mtb silcone grips as your tire
@froztyYT0721
3 жыл бұрын
𝙻𝚖𝚊𝚘
angas lods sad lng wlang racetrack dto kinalawang nlng ung akin
What was the website you selling your car?Anyother car for sale?
@Z3NBluster
3 жыл бұрын
If you watch the video carefully you will see the link in the upper left corner of the video for dxnprovisions.com. if you type that into your browser you will get to the website. You can also click the links in the video description. But you are too late. This car has been sold.
Test run
What do you recommend for high speed race?
@Z3NBluster
3 жыл бұрын
I like MS or S2.
@ianeva5011
3 жыл бұрын
Are pneumatic tire suitable for racing?
How much does it cost when sold, i want to buy if I can afford
@Z3NBluster
3 жыл бұрын
Sold Out, sorry.
Hi sir..can this build put to the vs chassis?
@Z3NBluster
2 жыл бұрын
No
@imvadungtv8861
2 жыл бұрын
Ok thnks..hope u will do soon 😁👍🙌
How do I contact you in regards to buying one of these off you
@Z3NBluster
3 жыл бұрын
You'll have to wait for the next build video. I don't take commissions.
My vz can't run. Same set up
why did you put the wheels the wrong way around on?
@Z3NBluster
3 жыл бұрын
It's better for balance. It moves the center of mass from the outside of the wheel hub closer to the center of the chassis. Cornering, balance, acceleration, and braking get better.
no break pads?
@Z3NBluster
3 жыл бұрын
Good question. It's included for free in the package! Already shipping tomorrow to the buyer.
Please try running the machine. Will be good to see the result.
@Z3NBluster
3 жыл бұрын
The car is built to be sold. So the car will be in new condition. And besides, it already sold.
You dont want the fan to be blowing all the carbon dust in the air.
all reviews of tamiya settings but not running test
Hi how can I order VZ-Chassis build?
@Z3NBluster
3 жыл бұрын
You can't is sold out.
What was the total amount am i going to spend with this build?
@Z3NBluster
3 жыл бұрын
Sold already.
@miyosh8t925
3 жыл бұрын
@@Z3NBluster no i mean is how much am i going to spend with sa same specs if built it on my own?
@Z3NBluster
3 жыл бұрын
@@miyosh8t925 The parts list is in the beginning of the video. You can compute it on your own by looking up the part numbers.
@miyosh8t925
3 жыл бұрын
@@Z3NBluster oki
the camera angle sucks. I can't see what's happening.
Money is big