Finally, thank you for this tutorial bro, simple/basic settings are great for casual player, because I'm tired following recent Mini 4WD trends that became complicated lately
@alidadulit86176 жыл бұрын
I Waiting For part Two Stay cool Bro🖒
@sabaru56944 жыл бұрын
Do you need all the extra steps to put the basic car together? Like does everything come in the box to build the stock car?
@zaihidinsharif66984 жыл бұрын
Hi z3n! just a question, for the hollow stainless steel shaft can we use 60mm instead of 72mm? Is there any pros or cons?
@kulotski696 жыл бұрын
Im waiting for part two..then many builds ahahah
@amrynursam3046 жыл бұрын
Finaly.. Yeay.. 😍😍😍
@frankenelimtangco24003 жыл бұрын
Sir, If i pierced my wheel what should i do to secure my wheel from the shaft? Is it already good to leave the end or the tip of the shaft before the wheel open or what? I'm worried about the wheels comin off from the shaft. Sorry i'm new to this hobby.
@radifansetiadi40854 жыл бұрын
Newbie question: what kind of lube did you use for gears?
@balonimo47236 жыл бұрын
Pwede rin ba yung rear 3mm hg carbon stay (95259)? With the same multi roller stay sa front.
@aliefluthfie6 жыл бұрын
I love watching u build a car... How u done it is like a real pro... But could u give an advice how to pull out those wheels without making them bend??
@Z3NBluster
5 жыл бұрын
Yes, you use a wheel puller. The wheels are pierced on this build.
@alidadulit86176 жыл бұрын
Thats Cool Bro thanks for info
@Z3NBluster
6 жыл бұрын
Ali Dadulit You're welcome. Stay tuned for part 2.
@muhammad-arief2 жыл бұрын
Thanks, I learn alot from this video
@neoboy25785 жыл бұрын
newbie question master zen why do we need to pierce the wheels? thnx
@Z3NBluster
5 жыл бұрын
Give wheels more grip on the shaft minimizing slippage. Also makes it easier to use wheel pullers and pushers.
@kennethfelizardo1855 жыл бұрын
newbie question sir, which do you prefer, medium dia or large dia tires for AR?
@Z3NBluster
5 жыл бұрын
Medium mostly, but it depends on the track.
@catrac3r4635 жыл бұрын
Sa lahat ng filipino dyan😂😂kaway kaway naman dyan😂🤪🤟
@jassenrobertc.padilla5645 жыл бұрын
Hey Z3N Bluster, planning to build my first Mini 4WD, the Diospada Premium, you think I can apply what I learned from Part 1 and 2 of this video and apply it to myself? ...for my very first build? It was difficult to understand at first why we need all the other steps but I got it, also all the special tools you had kind of started to discourage me since it's more of a monetary commitment than I anticipated, though I'm very interested but obviously with entry level knowledge. Anyways, any other help and advice you could give me would be very much appreciated, thanks!
@Z3NBluster
5 жыл бұрын
Everything should fit as long as it's AR. The only issue I foresee is that there may be clearance issue with the body front and sides. If that's the case you're allowed to trim the body to allow the parts to fit.
@jassenrobertc.padilla564
5 жыл бұрын
@@Z3NBluster Can I use the FRP Wide Front Plate and Rear Plate since you mentioned the one for the Super X Chassis did not fit?
@Z3NBluster
5 жыл бұрын
What part numbers?
@jassenrobertc.padilla564
5 жыл бұрын
@@Z3NBluster Front Plate (#15451) Rear Plate (#15452)
@Z3NBluster
5 жыл бұрын
You can use 15451 in the front if you want that as your roller mounts. But for the super x piece I was trying to use. That was meant to be an underguard. Now I just use the 19mm HG Taper Rollers 95436
@user-xg4zd3gx8d Жыл бұрын
Do you used medium wheel set
@GhostBoiiMusic6 жыл бұрын
I'm gonna be using one of my Asia Challenge AR's. Is that a bad idea?
@Z3NBluster
6 жыл бұрын
The Thundershot Asia Challenge? That's up to you. You'll need to buy separate medium diameter wheels and tires though.
@jillpangilinan65696 жыл бұрын
Will this do for super XX chassis too?
@Z3NBluster
6 жыл бұрын
Maybe. It's up to you if you want to try it. You will need to use narrow medium dieter wheels on all four. But as far as I can see, you might be okay.
@dominicrivera76076 жыл бұрын
Bro in this setup can use hyper dash pro?
@Z3NBluster
6 жыл бұрын
If you want to use Hyper Dash Pro. You'll need to change the front underguard to have brakes too. The limit of this design is a STRONG Light Dash if you can find one. It was designed for Tuned Motors so you'll have to make changes.
@Aeveo6 жыл бұрын
Can i use electronic contact cleaner instead of lighter fluid? Nauuso nnmn d2 sa pinas. ^_^
@Z3NBluster
6 жыл бұрын
You can. It's up to you. Running it in a jar of lighter fluid is more thorough.
@yi_hou30925 жыл бұрын
new to this type so Are Hard tires better than rubber ones when making mini 4wds?
@Z3NBluster
5 жыл бұрын
I'm sorry what do you mean? Hard tires are also made of rubber. Are you asking Hard Tires vs Slick Tires?
@yi_hou3092
5 жыл бұрын
sorry I mean slicks I’m really new to this
@tch33224 жыл бұрын
is there any chance you solve the under guard issue since 15242 not fit? I mean without cut the chassis.
@Z3NBluster
4 жыл бұрын
Yes, we have some innovations that were made recently here in the States for Tuned Class. I will release those updates in the future when I have the time.
@tch3322
4 жыл бұрын
@@Z3NBluster Thank you.
@josemarilopezdeleon32735 жыл бұрын
Oh ok thanks
@pjm0125 жыл бұрын
Bro what item did you use for putting wheel on the shaft together?
@Z3NBluster
5 жыл бұрын
Arrowmax Wheel Installer. Check DXNprovisions.com for availability.
@pjm012
5 жыл бұрын
You do shipping in PH?
@Z3NBluster
5 жыл бұрын
@@pjm012 Go to the website, and ask them directly.
@skhyz1725 жыл бұрын
Do one for a super xx chassis
@jeffdemition23085 жыл бұрын
what body are you using poly aero avante?
@Z3NBluster
5 жыл бұрын
Yes.
@josemarilopezdeleon32735 жыл бұрын
Zenbuster ? Do you have a avante pro x ?
@Z3NBluster
5 жыл бұрын
Are you talking about Item number 18616? If so, then no. Also it's just called Avante X.
@ppppproperty17675 жыл бұрын
hi sir i have just moved to the us recently so where can i get the parts? are there any online stores? thx
@Z3NBluster
5 жыл бұрын
Click the link in the video description. DXNProvisions.
@ppppproperty1767
5 жыл бұрын
Z3N Bluster thank you!
@AlexanderVincentMartinez5 жыл бұрын
Is that a torque tuned motor?
@Z3NBluster
5 жыл бұрын
No, it's a Torque Tuned 2 Motor.
@ponyangenriquez53305 жыл бұрын
Ano takbo nan zen pro stack o technical??
@Z3NBluster
5 жыл бұрын
Look in my channel for the videos Tamiya Mini 4WD Testing: AR vs MA vs FM-A Technical and the video Tamiya Mini 4WD Testing: AR vs MA vs FM-A Speed Tech.
@Edaus936 жыл бұрын
Why u need to soak the bearing ball n roller to lighter fluid??
@Z3NBluster
6 жыл бұрын
To remove the grease. the grease slows down the bearings.
@Aeveo
6 жыл бұрын
Then do I need to put a small amount of oil on it before the race?
@akinaboy695 жыл бұрын
Is that a vtec solenoid cover?
@Z3NBluster
5 жыл бұрын
No.
@lonegangsta105 жыл бұрын
Bro can you make tutorial vid for xx chassis please thanks
@Z3NBluster
5 жыл бұрын
No, X/XX has too many disadvantages.
@lloydi.estrada3545 жыл бұрын
Did you change the gear from the box?
@Z3NBluster
5 жыл бұрын
I said the gear ratio within the first three minutes of the video.
@lloydi.estrada354
5 жыл бұрын
Thanks for the reply! Got it thank you so much
@ernestalencaballero87424 жыл бұрын
2.1 ba tlaga yung wheel piercer drill bit? Tningnan ko sa shopee 1.2 mm pinaka malaki..
@Z3NBluster
4 жыл бұрын
Yeah, the 2.1mm bit comes with the Object 324 Wheel Piercer kit.
@alfonsoalmera85384 жыл бұрын
what gear ratio did you use?
@Z3NBluster
4 жыл бұрын
I'm pretty sure I mentioned that in the video.
@ffcl985 жыл бұрын
Why do you soak them on Lighter fluids?
@Z3NBluster
5 жыл бұрын
To clean out the grease. It slows down the bearing.
@solidclark15
5 жыл бұрын
Light Fluids, as in pang sindi?
@kenziekylecfacundo8295 жыл бұрын
I only have manta ray cover.
@glennlabonete5 жыл бұрын
How much does all the parts use cost
@Z3NBluster
5 жыл бұрын
Watch part 2.
@glennlabonete
5 жыл бұрын
@@Z3NBluster thanks master already seen it.
@dreiedralin53886 жыл бұрын
How much po ang inabot ng build?.
@Z3NBluster
6 жыл бұрын
Watch Part 2
@wglkanekigaming74045 жыл бұрын
saan po tamiya race plsss kayalangan ko locations
@Z3NBluster
5 жыл бұрын
Click the dxnprovisions.com link in the video description. I also showed those links in the first 1 minute of the video.
@rayhansatrio74755 жыл бұрын
How expensive was this?
@Z3NBluster
5 жыл бұрын
Watch part 2.
@rayhansatrio7475
5 жыл бұрын
@@Z3NBluster thanks
@djlb73582 ай бұрын
I thought if it basic set up you could only use plastic parts like the rollers
@brandonneilsta.teresa34945 жыл бұрын
16:20 LMAO
@wglkanekigaming74045 жыл бұрын
kawaykaway ako
@mr-t12435 жыл бұрын
The only strange thing about these cars,the motor pinion is pressed on.The motor and pinion have to be free spinning
@Z3NBluster
5 жыл бұрын
The motor pinion have to be free spinning? Mini 4WD transmission is direct drive. Even when the motor isn't running, the pinion and motor are all connected to the gears.
@isaiahpertierra57766 жыл бұрын
This hobby is expensive :(
@Z3NBluster
6 жыл бұрын
Isaiah Pertierra Compared to other hobbies it isn't expensive. For example, there's a card in magic the gathering called Misty Rainforest. A card used in competitive magic decks in alot of formats. An original Near Mint, Non-Foil copy is going to cost you $35. For your deck to be competitive you generally want around 3-4 these in your deck. That is either going to be $105-$140. A tournament legal deck requires 60 cards minimum. While you may have a nice set of 4 Misty Rainforest that you bought for around $140, you still need to build the rest of your deck. You will still need to buy 56 more cards to be able to compete. In comparison, this car costs around $160-$170.
@isaiahpertierra5776
6 жыл бұрын
Z3N Bluster I am frugal. Anw, maybe i feel this way because i bought individual parts rather than buying a box set which cost me more :(.
@Babylink1998
6 жыл бұрын
i started this hoppy and im making everything step by step , you got this mate , you dont need to do everything at the same time every hobbys needs time to learn and practice so just start it slow and end it better! dont be hurry on everything you will get everything on the end , thats how the pro players are, you should start from ZERO!!
Пікірлер: 96
Finally, thank you for this tutorial bro, simple/basic settings are great for casual player, because I'm tired following recent Mini 4WD trends that became complicated lately
I Waiting For part Two Stay cool Bro🖒
Do you need all the extra steps to put the basic car together? Like does everything come in the box to build the stock car?
Hi z3n! just a question, for the hollow stainless steel shaft can we use 60mm instead of 72mm? Is there any pros or cons?
Im waiting for part two..then many builds ahahah
Finaly.. Yeay.. 😍😍😍
Sir, If i pierced my wheel what should i do to secure my wheel from the shaft? Is it already good to leave the end or the tip of the shaft before the wheel open or what? I'm worried about the wheels comin off from the shaft. Sorry i'm new to this hobby.
Newbie question: what kind of lube did you use for gears?
Pwede rin ba yung rear 3mm hg carbon stay (95259)? With the same multi roller stay sa front.
I love watching u build a car... How u done it is like a real pro... But could u give an advice how to pull out those wheels without making them bend??
@Z3NBluster
5 жыл бұрын
Yes, you use a wheel puller. The wheels are pierced on this build.
Thats Cool Bro thanks for info
@Z3NBluster
6 жыл бұрын
Ali Dadulit You're welcome. Stay tuned for part 2.
Thanks, I learn alot from this video
newbie question master zen why do we need to pierce the wheels? thnx
@Z3NBluster
5 жыл бұрын
Give wheels more grip on the shaft minimizing slippage. Also makes it easier to use wheel pullers and pushers.
newbie question sir, which do you prefer, medium dia or large dia tires for AR?
@Z3NBluster
5 жыл бұрын
Medium mostly, but it depends on the track.
Sa lahat ng filipino dyan😂😂kaway kaway naman dyan😂🤪🤟
Hey Z3N Bluster, planning to build my first Mini 4WD, the Diospada Premium, you think I can apply what I learned from Part 1 and 2 of this video and apply it to myself? ...for my very first build? It was difficult to understand at first why we need all the other steps but I got it, also all the special tools you had kind of started to discourage me since it's more of a monetary commitment than I anticipated, though I'm very interested but obviously with entry level knowledge. Anyways, any other help and advice you could give me would be very much appreciated, thanks!
@Z3NBluster
5 жыл бұрын
Everything should fit as long as it's AR. The only issue I foresee is that there may be clearance issue with the body front and sides. If that's the case you're allowed to trim the body to allow the parts to fit.
@jassenrobertc.padilla564
5 жыл бұрын
@@Z3NBluster Can I use the FRP Wide Front Plate and Rear Plate since you mentioned the one for the Super X Chassis did not fit?
@Z3NBluster
5 жыл бұрын
What part numbers?
@jassenrobertc.padilla564
5 жыл бұрын
@@Z3NBluster Front Plate (#15451) Rear Plate (#15452)
@Z3NBluster
5 жыл бұрын
You can use 15451 in the front if you want that as your roller mounts. But for the super x piece I was trying to use. That was meant to be an underguard. Now I just use the 19mm HG Taper Rollers 95436
Do you used medium wheel set
I'm gonna be using one of my Asia Challenge AR's. Is that a bad idea?
@Z3NBluster
6 жыл бұрын
The Thundershot Asia Challenge? That's up to you. You'll need to buy separate medium diameter wheels and tires though.
Will this do for super XX chassis too?
@Z3NBluster
6 жыл бұрын
Maybe. It's up to you if you want to try it. You will need to use narrow medium dieter wheels on all four. But as far as I can see, you might be okay.
Bro in this setup can use hyper dash pro?
@Z3NBluster
6 жыл бұрын
If you want to use Hyper Dash Pro. You'll need to change the front underguard to have brakes too. The limit of this design is a STRONG Light Dash if you can find one. It was designed for Tuned Motors so you'll have to make changes.
Can i use electronic contact cleaner instead of lighter fluid? Nauuso nnmn d2 sa pinas. ^_^
@Z3NBluster
6 жыл бұрын
You can. It's up to you. Running it in a jar of lighter fluid is more thorough.
new to this type so Are Hard tires better than rubber ones when making mini 4wds?
@Z3NBluster
5 жыл бұрын
I'm sorry what do you mean? Hard tires are also made of rubber. Are you asking Hard Tires vs Slick Tires?
@yi_hou3092
5 жыл бұрын
sorry I mean slicks I’m really new to this
is there any chance you solve the under guard issue since 15242 not fit? I mean without cut the chassis.
@Z3NBluster
4 жыл бұрын
Yes, we have some innovations that were made recently here in the States for Tuned Class. I will release those updates in the future when I have the time.
@tch3322
4 жыл бұрын
@@Z3NBluster Thank you.
Oh ok thanks
Bro what item did you use for putting wheel on the shaft together?
@Z3NBluster
5 жыл бұрын
Arrowmax Wheel Installer. Check DXNprovisions.com for availability.
@pjm012
5 жыл бұрын
You do shipping in PH?
@Z3NBluster
5 жыл бұрын
@@pjm012 Go to the website, and ask them directly.
Do one for a super xx chassis
what body are you using poly aero avante?
@Z3NBluster
5 жыл бұрын
Yes.
Zenbuster ? Do you have a avante pro x ?
@Z3NBluster
5 жыл бұрын
Are you talking about Item number 18616? If so, then no. Also it's just called Avante X.
hi sir i have just moved to the us recently so where can i get the parts? are there any online stores? thx
@Z3NBluster
5 жыл бұрын
Click the link in the video description. DXNProvisions.
@ppppproperty1767
5 жыл бұрын
Z3N Bluster thank you!
Is that a torque tuned motor?
@Z3NBluster
5 жыл бұрын
No, it's a Torque Tuned 2 Motor.
Ano takbo nan zen pro stack o technical??
@Z3NBluster
5 жыл бұрын
Look in my channel for the videos Tamiya Mini 4WD Testing: AR vs MA vs FM-A Technical and the video Tamiya Mini 4WD Testing: AR vs MA vs FM-A Speed Tech.
Why u need to soak the bearing ball n roller to lighter fluid??
@Z3NBluster
6 жыл бұрын
To remove the grease. the grease slows down the bearings.
@Aeveo
6 жыл бұрын
Then do I need to put a small amount of oil on it before the race?
Is that a vtec solenoid cover?
@Z3NBluster
5 жыл бұрын
No.
Bro can you make tutorial vid for xx chassis please thanks
@Z3NBluster
5 жыл бұрын
No, X/XX has too many disadvantages.
Did you change the gear from the box?
@Z3NBluster
5 жыл бұрын
I said the gear ratio within the first three minutes of the video.
@lloydi.estrada354
5 жыл бұрын
Thanks for the reply! Got it thank you so much
2.1 ba tlaga yung wheel piercer drill bit? Tningnan ko sa shopee 1.2 mm pinaka malaki..
@Z3NBluster
4 жыл бұрын
Yeah, the 2.1mm bit comes with the Object 324 Wheel Piercer kit.
what gear ratio did you use?
@Z3NBluster
4 жыл бұрын
I'm pretty sure I mentioned that in the video.
Why do you soak them on Lighter fluids?
@Z3NBluster
5 жыл бұрын
To clean out the grease. It slows down the bearing.
@solidclark15
5 жыл бұрын
Light Fluids, as in pang sindi?
I only have manta ray cover.
How much does all the parts use cost
@Z3NBluster
5 жыл бұрын
Watch part 2.
@glennlabonete
5 жыл бұрын
@@Z3NBluster thanks master already seen it.
How much po ang inabot ng build?.
@Z3NBluster
6 жыл бұрын
Watch Part 2
saan po tamiya race plsss kayalangan ko locations
@Z3NBluster
5 жыл бұрын
Click the dxnprovisions.com link in the video description. I also showed those links in the first 1 minute of the video.
How expensive was this?
@Z3NBluster
5 жыл бұрын
Watch part 2.
@rayhansatrio7475
5 жыл бұрын
@@Z3NBluster thanks
I thought if it basic set up you could only use plastic parts like the rollers
16:20 LMAO
kawaykaway ako
The only strange thing about these cars,the motor pinion is pressed on.The motor and pinion have to be free spinning
@Z3NBluster
5 жыл бұрын
The motor pinion have to be free spinning? Mini 4WD transmission is direct drive. Even when the motor isn't running, the pinion and motor are all connected to the gears.
This hobby is expensive :(
@Z3NBluster
6 жыл бұрын
Isaiah Pertierra Compared to other hobbies it isn't expensive. For example, there's a card in magic the gathering called Misty Rainforest. A card used in competitive magic decks in alot of formats. An original Near Mint, Non-Foil copy is going to cost you $35. For your deck to be competitive you generally want around 3-4 these in your deck. That is either going to be $105-$140. A tournament legal deck requires 60 cards minimum. While you may have a nice set of 4 Misty Rainforest that you bought for around $140, you still need to build the rest of your deck. You will still need to buy 56 more cards to be able to compete. In comparison, this car costs around $160-$170.
@isaiahpertierra5776
6 жыл бұрын
Z3N Bluster I am frugal. Anw, maybe i feel this way because i bought individual parts rather than buying a box set which cost me more :(.
@Babylink1998
6 жыл бұрын
i started this hoppy and im making everything step by step , you got this mate , you dont need to do everything at the same time every hobbys needs time to learn and practice so just start it slow and end it better! dont be hurry on everything you will get everything on the end , thats how the pro players are, you should start from ZERO!!
pinoy amputa. hahaa Idol
@Z3NBluster
5 жыл бұрын
Ako ang puta?