What kind of Modifications should I make? I was thinking the Iron Man mechanic nail gun. The movie kinda sucked, but I love the scene where he turns into a savage and starts weaponizeing all sorts of power tools and parts xD Check it out here goo.gl/jWWi47

@Blueice999

7 жыл бұрын

G3AR Hi, is there a faster way to help you with your projects expect TAD? I fill the point up to the limit (250) daily, but i dont know if it helps much.

@GreekGadgetGuru

7 жыл бұрын

Hey! They just added a browser version of TAD goo.gl/QXE7wU It's basically the same thing without the App.

@antonthyrestam5125

7 жыл бұрын

it would be cool if you used the big co2 tank as a stock for the gun think that would look great. keep the amazing vids up

@antonthyrestam5125

7 жыл бұрын

And also do you have jailbroken iphone? i saw the batlogo in statusbar in your fusioncore charger

@Maykay1312

7 жыл бұрын

G3AR can you add that thing on the cartrige insilator its like a cpu but if you give it power on one side its cold on the other sideis hot i dont know how its called but its like a procesor for a computer

I'm dying😂😂😂😂 he said I took it off the display rack with tools I found in the store genius

You should either make the needler with perhaps a couple of spaces for more cartridges or make some sort of a bigger canister and just fire as many as possible, hi from the uk

i love the concept, maybe with a larger air supply the usage would be stable. Reminds me of that scene in Iron Man when Tony Stark goes Rambo with his homemade pistols. It would be interesting to see if the nail gun could fire a stronger projectile, one that you could make by modifying the original nails. all together i love the idea!!!

If you have a valve that can release air, do you have a valve that can release Half-Life 3?

Beautiful work !

You nailed it!

You are so creative!!!

@GreekGadgetGuru

7 жыл бұрын

Tim Totaal Thank you!

i work with this pin nailer. Thats pretty awesome to see it use with a little co2 cartridge. Maybe design it in a way that it looks like a revolver with multiple cartridges so it doesnt freeze so easily?

question about regulators, i have read online that 12 co2 cartridges have a gas pressure of about 800psi, is there any advantage of using a high pressure regulator before the low pressure one?

Would it be practical to mount the Co2 canister and pressure guage onto the gun and have nichrome wire around it to heat it up faster?

Nice work! You should try making a heating coil/heating wires or something to maintain the optimal temperature for high pressure efficiency. If you get that sorted you could build some pretty insane things with even bigger cartridges :D

It looks like a weapon from Dead Space. Nice job on the Modification!

thank you for the inspiration has really helped me improve my own ideas

@GreekGadgetGuru

7 жыл бұрын

This is whats I'm here for! Thank you for letting me know. Knowing that I'm impacting peoples lives in a positive way.

Sick vid

Can I use this same co2 regular with a paintball compressed air tank or is that too much psi for the regulator to control?

@GreekGadgetGuru

2 жыл бұрын

No, it will work. Same pressure, higher volume.

try to dule up the co2 cartrage adapter so when one is out you get a nother and swich to gave more shots

is there any way that you could make the canister part of the handle, so you dont need to use your other hand

pretty neat! the shape reminds me of the twin vipers from warframe

congrats on 500k

having this as a mountable weapon on simething like a gauntlet would be cool and make it more practical im a battle encironment. you would also need to find a way of making the cartridges more easily interchangeable. perhaps a click in and latch release mechanism as oppose to a screw in cartridge as that eould take way more time, that would be like screwing in a gun magazine.

Man you create some of the coolest shit!

@GreekGadgetGuru

7 жыл бұрын

Thanks!

I saw an over the shoulder 2.5l CO2 tank!... u think that can work? I want something similar to this for carpentry I don't wanna lug around those 150psi tanks with me

can u outline the materials to construct this co2 adaptor?

Do you still have a list of parts to do this? This would be perfect for those little quick repairs or hobby jobs when you only need at most a few pins and don't want to lug around a compressor and hoses to the work. Way better than the pricey battery powered pin nailers for such light use.

maybe you should switch out the 12g CO2 cartridges for the 32g, or maybe install something next to the cartridge to keep it at a certain temperature

Can you connect more than one cartridge?

you cud use a 88g co2 bit bigger but still compacked more shoots

I loved this but I think you should make it with the big co2 cartridges

What are your thoughts on adding a custom ButtStock to turn it into a carbine?

@GreekGadgetGuru

7 жыл бұрын

Sounds like a great idea! I think a sniper rifle would work well, with large blow darts

you should add an air chamber in between the regulator and nail gun I don't think the regulator is keeping up with the cfm that the nail gun needs

How did you get it to fire like that

You could try the 82gr c02 tanks.

in my opinion, you should attach the gold part to the front of the gun so you can see the dial-thing, and you can hold the cartridge at the bottom. if you use an insulated glove, it could charge the thing faster, and your and won't get so cold just an idea, sorry if this was hard to understand, I just wanted to contribute.

What would happen if you put a heating element around the c02 canister?

@GreekGadgetGuru

7 жыл бұрын

Lets find out!

should try making something like the air rifle from metro. shooting ball bearings. but with the co2 cartridges

The paintball backpack idea sounds a lot better

Holy shit you “updated the display” laughing from the future

I think a revolving C02 chamber with 4-6 cartridges in it would be cool, but I have no idea how you'd go about doing it and making it airtight. If you could do it so it revolves the cartridges around after the shot or something , that might give them enough time to warm up again when it comes around to shoot. Another option would be to convert it into a nerf gun :D

think you can​ make/fuse this with a coil gun,also (maybe for another project)use a gas capsule per projectile(the capsule would be like a cartridge or put in a cartridge) and put em in a Nerf clip/magazine (if different project please keep the coil gun barrel+gas bullet)

Do you have any update on the Spider-Man web shooter

A quick CO2 reload system i think could benefit it a modified cartridge holder that requires a hard quick slam to lock id down and reload quickly an a short turn to release the holder.

this looks like the steampunk equivalent of a blowdart gun, so I think you could dip the tacks in some kind of toxin or something to induce sleep. It seems fairly silent, as well. otherwise, I think going big is your next move here, using a larger tank and magazine for the tacks. keep up the good work!

there are bigger co2 cartriges, not as big as a painball tank but better than the small ones you are using now

Add a taser! And make it shoot fireballs! On a more serious note, what about adding some sort of heating system for the CO2 cartridge?

im a Finnish carpentersomething like this seem very use full on the job

I reasently played Bioshock 2, and i tought about the rivet gun from there. Maybe you should do somthing along those lines, + bioshock is slightly steampumky i guess. Anyway this is just an idea but keep up the great work.

@GreekGadgetGuru

7 жыл бұрын

I love it! I was thinking more of a pistol, and then a sniper rife with blow darts.

Make a pouch and put a hand warmer on the CO2 cartridge container, consistent chemical heat and you don't have to freeze your hands

stuff some wire from a hairdryer (the one inside)near the cartridge, and let electricity trough it, it will make the gas expand quicker, as it is warmer.

so, we never got to know how shots the c02 cartridge can deliver.

A stock on this would be cool. with the co2 in it?

@GreekGadgetGuru

7 жыл бұрын

I can 3D print one :D

@MrMilitary402

7 жыл бұрын

G3AR exactly :) lol

@antonthyrestam5125

7 жыл бұрын

i also thought of that!

YOU WERE ON TV!!!

@GreekGadgetGuru

7 жыл бұрын

I was! Outrageous Acts of Science :D

The nail gun idea seemed like a possible weapon at first. but seeing the types of ammo you can use, it's not really practical at all. I can't actually see any modification with the current 'gun' you have as the nail are basically sewing pins. However, the only way I could think of it being viable as a weapon is by hiding it within a glove, or finger, and have some type of poison on it. By squeezing your palm, the gun is triggered and delivers a close range poison dart. A bit of a suggestion I would like to make for a possible project would be a card shooter like gambit and that spiderman line shooter

Use a 20g/16g co2 cartridge, u can buy them at any bike store.

Couldn't you wrap a copper coil around the section where the CO2 cartridge is and run a current through it? This way it would keep the cartridge warm thus increasing the pressure of the CO2 cartridge.

@GreekGadgetGuru

7 жыл бұрын

That would be interesting!

You should get journal to write ideas down in. Maybe like give a small description of what it is, maybe a little diagram something? Anyway, like at the end of each month you show it off in a video and hold straw pole or vote for what we'd like to see.

Think about this: A soldier with an Exo suit on running around dual wielding these nail guns but then scaled up, armor penetrating and fully automatic :D

Use Sodastream co2 Cylinders ;)

Anyone remember the old c02 paslodes?

You might not get many views but keep going and dream big

co2 gas leak from the small hole on the back of the regulator after attaching the co2 adaptor!

Maybe you could attach a heat sink to the CO2 cartridge so it warms up faster and you don't have to freeze your hand.

When did Corey Feldman start doing tool reviews ?

you should design it to be the needler

the handle for the co2 cartridge looks like a peg from a bike.

Modify to fully automatic or burst fire

Make a barrel that fits co2 cartridges and use the hammer to puncture them

do a range test

Do you need a gun license for it?

are you actually from Greece?

@GreekGadgetGuru

7 жыл бұрын

No. Its my heritage

you should run a bigger tank on it

can you make mask with a moving mouth?

@GreekGadgetGuru

7 жыл бұрын

I could probably make it so that it moves like on a mini screen. But actual motion is tricky.

@dotdotman3924

7 жыл бұрын

Anyway you have in mind would be awesome!(thanks for commenting back!)

@antonthyrestam5125

7 жыл бұрын

What about voice detection sensor?

hi

NAAAAAAIILLL...

Daaaaaaaaaaaanngggggg

εισαι αλήθεια Έλληνας

make a steam punk paintball gun with a spring NERF magazine

Make the syringe rifle thingy from fallout four

Steampunk grappling hook.

Can you make it shoot metal balls

you sound like techrax

this thing make me remember high school of the dead (anime)

Robo-acupuncture

Who was here when he used to be called Greek gadget guru

use hpa no freezing dope.

Make retractable wolverine claws

@GreekGadgetGuru

7 жыл бұрын

Colin Furze?

@Busty_Dusty

7 жыл бұрын

G3AR who that

you should crossover with colinfurze even though he lives farther away.

@GreekGadgetGuru

7 жыл бұрын

If he would even humor me...haha

Use a sodastream tank.

use a big paintball tank

1st

Get a CO2 tank that's just as big as the gun and mount it to the to of the gun!

This real life for call of duty warzone

It looks like steam punk 3dmg

Love the videos but why these arrows you're too amazing for clickbait

@GreekGadgetGuru

7 жыл бұрын

Haha, gotta advertise man. 70% of views are on mobile phone, I have to stand out. Just rolling with the punches

3:38

spiderman webshooter

pootie tang belt or pootie tang bullet proof pony tail

Steals tool not in inventory anymore, it appears it's been stolen in inventory, no wonder shit goes missing everywhere, and why their arnt display versions of things everywhere.

I actually thought it would be steampunk inspired.....

@GreekGadgetGuru

7 жыл бұрын

+Sweet! It could probably be done, I'll look into the idea of a steam powered tool. It would have to be flash steam, which would take a lot of power

@isaeproductions5217

7 жыл бұрын

G3AR I don't think that's what he means...

@GreekGadgetGuru

7 жыл бұрын

ISaeProductions I'm lost haha, what does he mean haha. This is a progressive build. Comments and suggestions will shape the end result.

@isaeproductions5217

7 жыл бұрын

G3AR I think he means the theme of the weapon, google steampunk weapons

ime happy with whatever