Mini Jet Boat Build - Part 1 - Jetstream 12' Buccaneer
Тәжірибелік нұсқаулар және стиль
The mini jet boat project begins! In this video a 12ft Buccaneer kit made by Jet Stream Adventure Boats, is assembled!
🛠 Tools and Parts Used In This Video:
Lincoln MP 210 Welder - amzn.to/3uof5AF
Lincoln Spool Gun - amzn.to/3aieLws
YesWelder MIG 250A Pro MIG Welder- yeswelder.com/products/mig-we...
YesWelder Spool Gun - yeswelder.com/collections/wel...
Welding Clamps - amzn.to/3NIGh3V
Welding Gloves - amzn.to/3R2lxXw
👉Other Making Stuff Videos You Might Like:
YesWelder MIG PRO 250 Review - • YesWelder MIG 250 PRO ...
YesWelder MIG 270K Review - • YesWelder MIG 270K Rev...
Diy Tracked Vehicle - • Taking It For A Spin -...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
👉Thanks for watching!
(C)2022 TMI Enterprises Inc.
#makingstuff
#minijetboat
#jetboat
#jetsteareamadventureboats
#goodcontentgang
Пікірлер: 177
Help me name this boat! Leave your suggestions in the comments.
@abdullabud9133
Жыл бұрын
spirit boat❤️❤️❤️❤️
@MegaPoblema
Жыл бұрын
Me mande o link de onde eu possa comprar esse kit sou do Brasil obrigado.
@Rinkboard
Жыл бұрын
Skippy
@t2evride867
9 ай бұрын
Jet for fun
@staceymccloud6
2 ай бұрын
Larry
FUN! This has been on my bucket list for years.
This is an awesome project. Can't wait to see it finished!
@MakingStuff
Жыл бұрын
You and me both!
"Im very happy with the way this weld turned out" lol, no im kidding, im a welder i do custom fabrication all day, and you made me feel good about my welds, awesome project man, subscribed
@MakingStuff
Жыл бұрын
Thank you very much!
Looking great! Making Waves
@MakingStuff
Жыл бұрын
Thanks!
I'm really excited about this project!
@MakingStuff
Жыл бұрын
Me too! Thanks for watching!
That looks like a fun project. Thanks for sharing 👍
@MakingStuff
Жыл бұрын
Thanks for watching!
Very nice and interesting project. Make sure you have a tether cord and cut off switch installed so when it throws you out of the boat it'll shut down!! LOL!! Looking forward to the next video.
@MakingStuff
Жыл бұрын
The jet ski has that already built in and yes I will be using it. Thanks for watching!
Good stuff! Cool that your doing a jet boat build!
@MakingStuff
Жыл бұрын
Thanks 👍
This is going to be a great project to watch from start to finish. Can't wait to see how it turns out! Tryin' to think of a good jet boat name...
@MakingStuff
Жыл бұрын
Thanks!
My favourite bit was folding the aluminium sheet, great skills you have.
@MakingStuff
6 ай бұрын
Thank you!
Nice project Bob, I love it.
@MakingStuff
Жыл бұрын
Thanks 👍
This is so amazing, congratulations from Brazil....
@MakingStuff
Жыл бұрын
Hello Brazil, thanks for watching!
Show vc é um artista
you're awesome brotha! this is a great build so far !
@MakingStuff
Жыл бұрын
Thanks a bunch!
Som’em ain’t right! -for the name. Just started my boat build yesterday! Same kit as yours but I’ve got the four seat option. Great video and good luck with the build!
@MakingStuff
Жыл бұрын
Hopefully I'll be able to start on mine again soon. Sometimes life takes you a different direction than what you want to go.
Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@MakingStuff
Жыл бұрын
Glad you enjoyed it
Great vidéo ! Very fun project !
@MakingStuff
Жыл бұрын
It has been a blast to work on so far. Thanks for watching!
Cool !!!
We have nearly the same interests across the board. I’ve been eyeing a watts craft for years.
@MakingStuff
Жыл бұрын
We are a rare breed. I can't find anyone around where I live that is into the same things as I am. Thanks for watching.
Mantap salam dari Bonek Surabaya Indonesia di tunggu kreasi selanjutnya bos
Good job man you may name it Bullet.
Awesome video bud. This type of content is a++++++
@MakingStuff
4 ай бұрын
Glad you enjoy it!
Making Stuff is a good name...
This is going to be a awesome series you should Name it The broken bit
@MakingStuff
Жыл бұрын
Ha that is a good name, thanks for watching!
Great Job Bob. Good ship Fartgas
@MakingStuff
Жыл бұрын
Ha,Ha. How's it going in Texas?
Awesome project! Boat names: Boaty McJetFace, DIY JetBy, Bob's Skip
@MakingStuff
Жыл бұрын
Thanks for watching!
That is a lot of aluminum or aluminium. You are doing a great job of welding.
@MakingStuff
Жыл бұрын
Yeah I was a little intimidated at first but practiced a bunch before actually starting on the kit.
Should be a fun little boat. Silver streak, assuming you leave it that natural color. Maybe too easy, but should be accurate.
@bob_mosavo
Жыл бұрын
Yeah, Silver Streak, like the train 🙃
@MakingStuff
Жыл бұрын
I like it!
@johnmccanntruth
Жыл бұрын
@@bob_mosavo yes, good movie!
Very cool Name on the boat She's squirly Thanks for the video
@MakingStuff
Жыл бұрын
Thanks for watching!
What kind of wheel are you using to grind the welds flat?
Hi 🌹❤️🌹honestly you are an amazing man. I congratulate you because you have all these ideas for creativity and useful things I suggest you call this boat (. spirit boat ) 🌹🌹
@MakingStuff
Жыл бұрын
Wow, thank you
Boat Name: MS ROCKS People who don't know you will think it's a female who rocks the boat. Don't discard your pallets. They make awesome raised beds
❤ Love
Rad!
Sar very good ❤️ part 2 give ok
That is so cool but crazy fast and would you guys able able built a single man cabin boat fishing rig with outboard motor setup that be good investment on sigle man suze boats for any kind of spirts racings or fishing trips 🤞
Can you tell me the standard size?
what is the correct name of the speed squares with the large flange for you to clamp onto called???
What kind an size of welding machine do u have?
Not questioning since idk much about welding aluminum but I did weld doing a very similar process for about a year making sounds dampening rooms and such. My question is do you have to push your welds? With how thin the material was I was working with usually pushing the weld required either moving really quick and getting a crappy weld or drawing the weld towards you allowing for a larger tac/weld
@MakingStuff
Жыл бұрын
Yes you are suppose to push the weld with aluminum.
Ông nên chia sẽ kích thướt .
Very cool. How many hours of welding would you say is involved to put this kit together? Also what size mig welder would I need? Appreciate any info. Thanks!
@MakingStuff
9 ай бұрын
It has taken me a year to get this far. Of course I can't work on it 8 hours a day either. The best aluminum welder I have used is the Yeswelder YWM-211P with spool gun. yeswelder.com/collections/welder-cutter/products/yeswelder-ywm-211p-double-pulse-aluminum-mig-welder?ref=makingstuff
very smart guy
That's some scary sheet(metal)!
@MakingStuff
Жыл бұрын
Thanks for watching!
I love the big project that you're doing I love watching your channel and that I do have to ask.... you're doing this great big thing pushing yes welders and my curiosity runs really hard 10 months ago you did a video with the yes welder 250p and you're talking about MIG welding aluminum now here you got this great project putting together a jet stream boat which I love but you're using a Lincoln welder with a spool gun instead of using the yeswelder with the mig gun?????? and I asked a question back when you were pushing the welder about what it can and cannot do so why would you use a Lincoln over to yes welder? and I'm not here to troll you or anything just a quick just a question why the change of heart on the boat??? I'm a long time subscriber so I'm not going nowhere..
@MakingStuff
Жыл бұрын
That's a good question. The hull of the boat is 1/4 inch. Both machines are rated at 3/16" which is close enough to get the job done. The Lincoln did a better job on the 1/4" so I started out using the Lincoln on the big stuff. I did use the Yeswlder on the brace that I made in the beginning of the video. There will also be some TIG welding in this project which will involve using a Yeswelder product. There are also other advantages the Yeswelder MIG has over the Lincoln which will be shown in future videos.
How much was that boat kit?
Are all aluminum parts the same thickness? 3/16" or are there any smaller ones?
@MakingStuff
Жыл бұрын
Smallest is 1/8th inch, thickest is 1/4"
Name: play bouy. I know it’s gonna take some time until it’s ready to hit the water but I’d love to watch this as one big video montage start to finish, like a hour and half long. Either way I’ll still watch tho lol
@MakingStuff
Жыл бұрын
Good idea, maybe I can do that. Thanks for watching!
Супер! Есть у вас DXF файл?
Do you do this whole project with an aluminum spool gun? No tig welding?
@MakingStuff
Жыл бұрын
So far it's just been Spool gun.
Boat name NOT STOPPING I just bought my own kit from Jetstream which is the same as yours. I haven’t started building it yet but I am researching as much on KZread as possible. Your first video is great but I was wondering if you could just do a little bit more details on the areas that you’ve run into problems or others could run into problems if they don’t know these little hidden secrets. I’ll keep watching and thanks for video and up coming ones.
@MakingStuff
Жыл бұрын
Other than the bottom not being cut correctly and the width not being 51.5 inches, I haven't had any problems.
@MegaPoblema
Жыл бұрын
@@MakingStuff bom dia, vc fez um ótimo trabalho !!...sou do Brasil e gostaria de saber onde consigo comprar um kit desse aí ? Todas as chapas já vem prontas para fazer as soldas ?
Im confused, was this beauty built with your YesWelder or the Lincoln welder ? Thx 🙏
@MakingStuff
5 ай бұрын
Started with the Lincoln, then switched to YesWelder when they released the YWM-211P. Had the YesWelder been available when I started the build, I would have used it for the whole thing.
@MonstroLab
5 ай бұрын
@@MakingStuff ok thanks!
I would love to see somebody take and make this boat using a Jon boat, maybe a 14-footer
@MakingStuff
Жыл бұрын
I'm pretty sure someone has already done this on KZread, but yeah that would be cool too. Thanks for watching!
That boat jump looked like if it had of went any more wrong it would have been a bad day
When's the next video coming out? I can't wait to see how this boat turns out
@MakingStuff
Жыл бұрын
Soon I hope. Thanks for watching!
What welder are you using? Cheers Fraser from New Zealand
@MakingStuff
Жыл бұрын
I started out with a Lincoln 210MP, but switched over to the YesWelder YWM-211P. I wish I had the Yeswelder from the begining of the project. It works much better on Aluminum. kzread.info/dash/bejne/i62Dy6ubo86sidY.html
JET STUFF
Hi Am inquiring what kind of welding machine are you using make and model?
@MakingStuff
10 ай бұрын
yeswelder.com/collections/welder-cutter/products/tig-welder-ywt-200dc?ref=makingstuff
Độ dầy tấm nhôm là bao nhiêu milimet ?
Jetboats were invented in New Zealand, so call it Kiwi 👍
@MakingStuff
Жыл бұрын
LOL, thanks for watching!
Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?
Name- "JALO" because it's hot and everyone will want to get in it!
Name for the boat "Bit broke" due to the issue with the hull profile.
What brand/model welder and spoolgun did you use?
@MakingStuff
Жыл бұрын
So far it has been mostly Lincoln MP210 with Lincoln Spool Gun.
@historobb
10 ай бұрын
How much did the kit weigh?
Boa tarde,sou aqui do Brasil quero te fazer uma pergunta qual a espessura da chapa?
@saymoncervantes3620
Жыл бұрын
Boa tarde, que eu sei a parte de baixo ele usam 1/4"(6,35mm) as laterais 1/8"(3mm) tudo chapa de aluminio 6061 t6
Where did you order it from i need one buddy for thevrivers here near me
@MakingStuff
5 ай бұрын
www.jetstreamboats.com/
@easternoakstaxidermyoutfit7817
5 ай бұрын
@@MakingStuff thank you sir
Did you get compensation for the mistake?
@MakingStuff
3 ай бұрын
Not monetarily, but yes they made up for it.
Mini Nemo
Whatz the cost of those welders bro
@MakingStuff
Жыл бұрын
Lincoln - amzn.to/3uof5AF Yes Welder - yeswelder.com/products/mig-welder-250a?ref=makingstuff
Lazer Hawk
Mig Mermaid
How much was the kit from Jetstream
@MakingStuff
7 ай бұрын
All of the pricing info is on their website.
how much would it cost to ask a welder for a job for a 6feet boat?
@MakingStuff
11 ай бұрын
Would probably be cheaper to just buy the hull already welded. The last I looked, Jetstream still offered fully welded hulls.
"J.B. Welded" (jet boat)
@MakingStuff
Жыл бұрын
Are you making fun of my welds? LOL. Thanks for watching. Did you stop making videos?
@42Fab
Жыл бұрын
@@MakingStuff it's been slow, but haven't quit
@eaglealnoor8891
Жыл бұрын
Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?
Name it the S.S. Minnow... 😆
@shootgp
Жыл бұрын
You don't look like the Professor, but you look like you could be one.
@MakingStuff
Жыл бұрын
Just don't take it on a 3 hour tour, LOL.
Looks like a river rat to me, great video.....
@MakingStuff
Жыл бұрын
Thanks for watching!
Trying to watch this with very low volume in bed with people sleeping next door, of course there had to be sirens..🙈
How much ps does it have?
@MakingStuff
7 ай бұрын
ps?
@Luderspieler
7 ай бұрын
@@MakingStuff oh sorry i meant horse power (0.7 kw)
@MakingStuff
7 ай бұрын
@@Luderspieler No probllem. It's 250HP.
@Luderspieler
7 ай бұрын
@@MakingStuff thanks
Some assembly required 🙂
@MakingStuff
Жыл бұрын
I like it. Thanks for watching!
Call it HMS Stuff :)
@MakingStuff
Жыл бұрын
Thanks for watching!
name... Making waves
Call it "boaty mc boat face"
Made something
Jetson
@MakingStuff
Жыл бұрын
As long as it doesn't sounds like the Jetson's car, LOL. Thanks for watching!
BoatyJetBoatFace
Maken Wake
A name for your boat “ Broken Bit “ there’s a story behind the name
@MakingStuff
Жыл бұрын
Good idea. I'm not done with it yet so there may be more stories, LOL.
homunculus
@MakingStuff
Жыл бұрын
Thanks for watching!
Alcoa maru
Bathtub
Quiero comprar una paga de esas la embiaran a
Hair Raiser
@MakingStuff
Жыл бұрын
Good One!
Shaina
Boop
Stuffinater
@MakingStuff
Жыл бұрын
Thanks for watching!
@bcstrings1
Жыл бұрын
I’m a machinist by trade and wish I could afford to start my own shop out of work right now it’s killer to see the stuff you do keep it up for us that wish we could -- you rock man
Broken bits
Q
Wet Dream.
@MakingStuff
Жыл бұрын
Thanks for watching!
is me take bigboat 911 navy @ everyboat navy@polish rever @sia(puminn-5A)