Пікірлер

• 
  @VikingwerkКүн бұрын

  Now i’m imagining a copper plated welding table, to resist spatter sticking 😂

• 
  @Enderbro3300Күн бұрын

  That was my nickname in highschool

• 
  @mychoice96350Күн бұрын

  I have a simulare storack rack and i use an labering machine to labeling the boxes

• 
  @fellzerКүн бұрын

  Lead solder. I try to avoid that stuff unless i need it.

• 
  @melvinrawlings1457Күн бұрын

  First try

• 
  @thaostrich2 күн бұрын

  Use L profile angle metal stock instead of wood for the shelves. Better use of space, you can add those new bins into it easily. I've done the same setup, and it worked well. Turned out I didn't use it as much as intended, so I downsized to half the bins.

• 
  @konradweniger31412 күн бұрын

  Type contents into computer and alphabetical in order will print a directory give them a space number to go with line number paint pen on front of box.

• 
  @bobjohnson96872 күн бұрын

  Love those bins from HF!

• 
  @J2ricker2 күн бұрын

  Very nice my friend

• 
  @jeffheins66243 күн бұрын

  Heavier duty casters, you just know it's going to get heavy...

• 
  @dennisyoung46313 күн бұрын

  Oh, good. Casters. Been putting those on all the new stuff.

• 
  @bobwallace52573 күн бұрын

  Excellent project I really liked the little clips that lock the containers in!!

• 
  @kasra79074 күн бұрын

  I think waterproof crip splices are beter, these are mostly used or designed for connecting ground leeds to sheilds of cables like usb ext or coactial wire pr solid core wier splices

• 
  @stephensanborn20244 күн бұрын

  Stop that’s the wrong way to twist the wires. Straight them out. Put the wires like Chinese finger traps end to end then give a little twist. Inlay them together. I don’t know the terminology. You have a better conductivity and resistance. Don’t twist the wire then wrap it around like. They are ok depending on the region we’re you.

• 
  @stephensanborn20244 күн бұрын

  Stop that’s the wrong way to twist the wires. Straight them out. Put the wires like Chinese finger traps end to end then give a little twist. Inlay them together. I don’t know the terminology. You have a better conductivity and resistance. Don’t twist the wire then wrap it around like.

• 
  @branchandfoundry5604 күн бұрын

  I write on mine with an oil based paint pen either side of the handle. Any pastel color shows up well.

• 
  @Money-Easy-Plan4 күн бұрын

  *"If you don't value your time, neither will others. Stop giving away your time and talents---start charging for it."* ---Kim Garst

• 
  @Pdpawlak4 күн бұрын

  Local lumbar yard has great Baltic birch plywood

• 
  @gorak90004 күн бұрын

  box store plywood is complete trash. Go to a proper lumber yard - they'll have better quality for a cheaper price typically

• 
  @EpicGamer-ny1fu2 күн бұрын

  not everyone lives near a lumberyard, let alone one with higher quality lumber than a box store

• 
  @gorak90002 күн бұрын

  @@EpicGamer-ny1fu I'm sure in most places, there's at least one independent or local lumber yard. If there's anything getting built in the area at all, chances are the lumber is not coming from a box store, so there are other options available. You do need to put some effort into finding them though - like typing "lumber yard" into google maps and seeing what comes up around you - there's probably more options than you realize

• 
  @sixtyfiveford4 күн бұрын

  Nicely done. I have been using these type of bins for years and they're so much better than trays or the little pull out drawers.

• 
  @johncbrown264 күн бұрын

  Literally the ONLY thing I'd do differently is to either label all the bins in a place where the label is visible without taking the bin out of the rack or to make a legend and put it on the top of the rack. Labels would probably be best for me personally, because I have a tendency to make any flat surface a shelf over time 🤦🏻‍♂️🤣💯

• 
  @RFMongoose4 күн бұрын

  Yeah, that plywood problem is all over. I go to a larger local sawmill called Hollingsworth (Indiana, near Kokomo). But I said as much on your short that I commented on. The tldr version is that the corporate mills in their infinite wisdom wanted to save money on the veneers, so they started cutting them thinner. But when they did that they had a problem with the glue showing through the veneer, which is a big problem for cabinet makers, so they decided to cut back on the glue and well, you see the results.

• 
  @kaoswithkc4 күн бұрын

  thanks good video

• 
  @HarryHov4 күн бұрын

  How you don’t have more views is beyond wrong …

• 
  @chetleonard1694 күн бұрын

  those plastic organizers are garbage, never trust the latches to hold the lids shut

• 
  @branchandfoundry5604 күн бұрын

  I've used them for nearly 20yrs. Never had a failure. Maybe I got a really good batch?

• 
  @jimbarchuk4 күн бұрын

  The problem with the labels mentioned is that you have to read them. Correct solution is to fasten a few samples of what's in a case to the front. Even if you have 3 cases of washers, just one washer will clue you into what else is in a box. Hot glue not so good, tie things on with fine wire, or small sheet metal screws.

• 
  @richardnoble71704 күн бұрын

  I keep a spreadsheet to track all of my cases and bins. Saves time when looking for stuff

• 
  @gvhiii2 күн бұрын

  May take a little time but the spreadsheet is the way I would go

• 
  @dimoichi58414 күн бұрын

  Brother label maker 8s the only thing i would add , only after figuring out what to put in each container. Makes finding what you need super fast. Other than that, I would not change anything. It is perfect the way you built it.

• 
  @jccbsl12 күн бұрын

  That's what I did. Works great.

• 
  @andyb77544 күн бұрын

  Very nice and interesting build, well done. I started to laugh when you first started gluing with that little paint tray and brush, then you poured from the tray (which is better) but finally poured from the main bottle! Much better idea. The other thing you could do is get an empty ketchup bottle (large style) clean it out and fill with glue from the gallon jug (ketchup bottle with squirt and locking lid), works great! Is there a place on the bin where you could put a out facing label? Love the project. Keep them coming. Thank you for the video.

• 
  @DEADB33F4 күн бұрын

  Need labels on all the bins. I have a system like this and without labels on the fronts it was frustrating AF. --- Can recommend the Brother PT-E550. Lots of reviews on YT. NB. The half-cut feature is a godsend (where it only cuts the label leaving the backing intact). Don't cheap out on the 300-series, pay a bit more and get the 550 . I got mine for £100 on offer but they're usually a bit more than that. I use the cheap aliexpress label cartridges for it though as they're good enough and cost a couple quid each vs 15-20 for the proper ones.

• 
  @landonlandon55334 күн бұрын

  Harbor freight...lol

• 
  @Steve.._.4 күн бұрын

  Oh no a guy with more money then sense has arrived. Hello Landon 😅

• 
  @landonlandon55334 күн бұрын

  @Steve.._. There is nothing like buying a tool for one time use. Harbor freight is trash.

• 
  @jhands19884 күн бұрын

  I mean pretty much every independent test shows icon being better than snap on.

• 
  @landonlandon55334 күн бұрын

  @jhands1988 Vintage American made tools will out last whatever brand. I'm not in a cult,I don't give a $hit about snap on either.

• 
  @hayleys11103 күн бұрын

  Nah that's B's you're full of your own opinion and experiences ​@@landonlandon5533🤡

• 
  @Speed-Of-Light-By-Meter4 күн бұрын

  How do you keep track of what parts are in which bin?

• 
  @MakingStuff4 күн бұрын

  There are labels on top of each bin. You can see them when you stand close.

• 
  @quazorgemash4 күн бұрын

  Try finding a local woodyard that sells sheet good, will hand wider selection and better quality.

• 
  @RFMongoose4 күн бұрын

  Local is for sure the way. Most of the mom and pop shops around me don't have sheet goods, but there's a bigger mill near me that sells sheets.

• 
  @PeteRondeau4 күн бұрын

  I hate that free standing bins for all the same reasons you do and I have the same problem, I can’t resist buying those HF cases whenever they are on sale. I wish I had room to make a bigger rack to hold them but I’m maxed out

• 
  @reinventedhometx18574 күн бұрын

  You can always make lables & put somewhere easily seen on the bins so you know what is in each bin. :)

• 
  @MakingStuff4 күн бұрын

  There are actually labels on top of the bins.

• 
  @MrTapanes4 күн бұрын

  @@MakingStuff I have labels on the top to show what's in each section/quarter/half/whatever and then a label on the front behind the handle (so it doesn't wear off with use) so that I can see what's generally in that container. I built my first one after seeing your build and now I'm at the same place where I need more slots for more containers. :-)

• 
  @haraldlonn8984 күн бұрын

  Great design.

• 
  @MakingStuff4 күн бұрын

  Thank you!

• 
  @PhilsJunkDrawer4 күн бұрын

  I just bought a bunch of TigerPly from Frank Miller out here in Union City, IN. The 1/4” is 3 ply + birch veneer and the 1/2” is 5 ply + birch veneer. Planning on cutting some of it today to see how it works out. $27 for a sheet of quarter and $44 for a sheet of half inch. Sadly, it poured rain while it was still in my truck bed. I sat it all out to dry for a couple days, and only one piece had some spots where the veneer bubbled up. I’ll update you with my findings.

• 
  @ChristianMartinez-hx2oq5 күн бұрын

  I've found that flux helps a ton in getting the solder to flow into the connection. Without it sometimes the solder only sits on the outside of the connection

• 
  @onradioactivewaves3 күн бұрын

  Isn't there flux in the solder already?

• 
  @sivalley2 күн бұрын

  ​@@onradioactivewaves No, these connectors use low melt bismuth based solder. Flux is not required, but it definitely helps with the whetting action. Just be sure to use rosin based flux. Do NOT use no-clean, water or acid based fluxes.

• 
  @onradioactivewaves2 күн бұрын

  @@sivalley i see. I used them a handful of times and thought I could see some flux, but I suppose that was the glue.... I'd prefer a crimp connection with heat shrink, but for a marine environment I could see them being a better choice. I've made a few connections, but no experience with actual usage thereafter (and it was for a water resistant outdoor device).

• 
  @sivalley2 күн бұрын

  @@onradioactivewaves Definitely would not use these in a damp/wet environment. These are more suitable for dry and potentially low vibration installation only. I've heard of them being used in aircraft harness applications, but I'm skeptical of fitness for that use.

• 
  @onradioactivewaves2 күн бұрын

  @@sivalley interesting and thanks for the advice. I used them on some outdoor stereos (not my choice) . I used to do a lot of my own test setups, some of them going through an accelerated life cycle of sorts ( very hot and humid) and after some years of experience I've learned that solder should only be used as an electrical connection, not a physical connection ( except in some rare circumstances I've seen). Also, the old solder seemed more robust , everything is this RoHs compliant stuff now.... crimps are the way to go when there is vibration (e.g. fixing your car or motorcycle) and hot glue works pretty good for waterproofing. (the decent and cheap way I've found anyhow)

• 
  @whotube3575 күн бұрын

  I don't get why the spool gun is better

• 
  @donnadupont63515 күн бұрын

  You did a great job on the cabinet. Have you ever thought about putting identification labels on the containers?

• 
  @spelunkerd6 күн бұрын

  I'll have to try that, it solves the dilemma of a mechanical connection. Is that 16 gauge wire? In the past with butt connectors, when I twisted, the heat shrink didn't collapse enough to give a tight seal at each end. If I used larger gauge wire, then the wire wouldn't go through enough to get a twisted pair back into the connector before crimping.

• 
  @SovereignMan856 күн бұрын

  Put some flux on both wire ends before heating so the solder flows in properly, and just interweave the wires without twisting by letting the strands push into each other instead of just going side by side.

• 
  @markandrews60546 күн бұрын

  Got one in my workshop over here in the United Kingdom. Works faultlessly. Love it. And Evolution their customer service is great too, any suggestions for improvement they listen and take the advice on board. New products are constantly in development as they make a whole range of tools. Got an Evolution Rage table saw too as I was so impressed with the sliding saw.

• 
  @lilyh10396 күн бұрын

  Lasted 2 months and died can’t revive anymore, saker mini chainsaw.

• 
  @mr.lynnrosaasen82187 күн бұрын

  Don't talk so much, I can see what your doing !

• 
  @davidthomas38597 күн бұрын

  They make those with wire for grounding shields on shielded wire. Also, use teflon wire. PVC is junk and the insulation melts really easily.

• 
  @Guitargreat7 күн бұрын

  I put a touch of flux on the wires first it flows better

• 
  @johnhaytack85907 күн бұрын

  chopping ivy

• 
  @MrShad0wM47 күн бұрын

  Do you think someone who has never worked before could accomplish this ? Or would it be smarter to pay someone to weld it

• 
  @PastorJohnBrown8 күн бұрын

  By any chance, would have a drawing or schematic?