the jacket what size do you normally wear and is that the same size or does it run small or big because I like to buy my father a jacket for hunting in the camo

@VCGConstruction

4 жыл бұрын

Use this size chart Joseph www.milwaukeetool.com/-/media/PDFs/Sizing-Charts/Milwaukee-Heated-Gear-Sizing-Guide-2018.pdf

@josephmalinowski6817

4 жыл бұрын

VCG Construction thank u bro

@josephmalinowski6817

4 жыл бұрын

VCG Construction I actually just talked to my Milwaukee rap and he's going to bring a few jackets in I like the three in one but the only problem they don't make the three-in-one in the camo and also i have to wear bright yellow with the reflective stripes when I'm working My Town job Sanitation summer go with the Milwaukee black jacket for 199 and then put my town jacket over that ask you what your my father wants but great video I couldn't wait for you to come out with this

@kingofthecrease30

4 жыл бұрын

@@josephmalinowski6817 i am a big guy...i can fit into 3X shirts & jackets but prefer 4X for extra room...the largest size milwaukee makes is 3X...i just bought this axis layering system in 3X and it fits me fine...its snug...not alot of room but its not too tight....its better for it to be snug so the heaters in the jacket are up against you...if the jacket is too loose you prob wont get the same heat transfer

@rossr4222

4 жыл бұрын

Joseph Malinowski Vince literally said it’s true to size. Skips video, goes straight to asking questions in comments lol

Because of u I converted over from dewalt to Milwaukee. I have the impact driver and the drill combo with ONE-KEY™,the wet vac and now I’m about to buy the jacket. I am now a officially a Milwaukee fan

@VCGConstruction

4 жыл бұрын

Which DeWalt tools do you still use in your lineup?

@rycwe

4 жыл бұрын

VCG Construction it’s very old “brushed “ I really don’t know

@andrewmills3842

4 жыл бұрын

Roy Crowe I’m so proud of you for converting.

@zacharysherry2910

2 жыл бұрын

Lol. The new DeWalt XR (20 volt) stuff impresses me but I buy Milwaukee because it goes with the batteries I own.

Got my heated dewalt last year, couldn't be happier perfect solution when your getting in and out of the truck during snow storms

Bought the tough shell a couple weeks ago when Home Depot started carrying them, then found one of these today for a steal of a deal at our electrical supply house. Throw this under the tough shell and turn then both on high and I am one toasty warm electrician! Gonna be great for working on docks this winter!

@zacharysherry2910

2 жыл бұрын

Electrician in extreme weather Colorado here. Definitely will get one of these and I already have the heated hoodie to throw in the mix hehe.

@strangerofthe2067

2 жыл бұрын

@@zacharysherry2910 buy it kinda snug if you can, like don’t buy a size bigger than you would need. I bought a 2nd one of these because the first one I bought was an XL and it is great but a little loose. So I got a large and it feels like it heats a lot better because it’s more snug. The heated hoodie plus this jacket plus the outer shell works great though! Stay warm bud!

They also have a cord to adapt to the lighter / accessory outlet of your truck . Good for long winter trips .What I mostly use for layering is the vest . The outer shell looks interesting !

Great video Vince! I was looking for a review on this before spending the money and you Answered all my questions in this video!

Putting the two together is just like motorcycle jackets.I just got the Milwaukee heated hoodie and I love it.

Great video Vince, very informative and that is a great looking jacket system. Thanks for all you do your videos rock.

I have the Milwaukee jacket and it is really warm even without the power on. What I like the most about them is the heated handwarmer pockets. My son gave me mine for Christmas two years ago.

I just picked up the heated hoodie because of your video- now I’m going to buy the jacket- thanks for the great video

Vin man you crack me up , great review 👍👌

Absolutely love this new jacket. I work on tug boats it gets Frigid cold in the winter time I’ll have on up to four jackets to stay warm and you can just peel them off layer by layer if you do get too hot and then I wear a pair of thermals underneath with longjohns or regular pants and then a pair of coveralls and I wear a pair of boots that can handle -19° the only problem with this is . is getting my wife to let me buy one LOL.But this would work amazing for me in my line of work because I would just keep the two jackets together you never know when you’re going to get soaking wet out here it happens a lot so being -20 and soaking wet is it fun

Yea buddy. Thanks for the review, I was about to buy this so you helped a lot

@5jjt

4 жыл бұрын

Does that mean you didn't get it?

very thorough. Just bought one of the heated tough shell. Although now im thinking I should return that and get this.

Thanks for demonstrating how to combine the coats. I got the kit and there was no instructions for it.

Nice concept yet would want the outer shell to be waterproof and to offer some sort of stay dry lining in the jacket component.

If you were to buy the work site later and then decide you wanted the rain shell layer, will you be able to use them both on the axis jacket? And also can you buy the different shells separate?

Just a heated sweater and your choice of weather resistant coat seams like best choice.

Excellent video ! The Jacket is great. Of course, I do not work outdoors, but I appreciate good stuff!

@VCGConstruction

4 жыл бұрын

Thanks Ma!! ❤️❤️

How do you adjust the heat once its layered together can you see the Hi/Med/Low with them joined together?

VCG, is the hood detachable? Great review on the jackets, keep them coming.

Thanks this help me out.

I live in Minnesota and everybody knows winters are very mild here LOL I only used the outer shell jacket all last year and stayed plenty warm but I will be getting the whole thing this year

Question how does this one compare to the older heated jacket combo?? I have the older version

I want one ,and now more since winter is coming!!!

I believe that I like the vest better. Keep it closer to the body where it’s needed and then it will replace one layer and another layer when ignited. That’s the idea at least

Hey Vince, I love your vids. Have you done anything on Milwaukee electric ratchets? TIA

Do these not have the heated pockets? Not that i use it a lot but when i need it its so nice, not having that feature is a bummer, idk id have to test it but i think id rather have that, than the sholders

during the holidays were all an extra large

@VCGConstruction

4 жыл бұрын

🤣🤣👍🏻

I say this on every Milwaukee video please bring the product to uk 🇬🇧

If you were doing snowblowing/shovelling, which would you choose? Hydro or Grid

I love this guy he is so cool

Sorry if I missed it but can you adjust the heat from the outer shell?

Milwaukee needs to make the heated jackets line in high visibility! Two birds one stone.

I know the hydro break shell can be purchased separately, but can the Gridiron shell be purchased separately if you already have the AXIS? I have looked and can't find one. Even on Milwaukee's site.

Nice jacket Vince!

Vince what side is that jacket if it's the correct size I'll buy the jacket from you and then you can just get the other rain jacket

Last winter in big bear cali I didnt even turn on the heat. The jacket kept me toasty. I didnt like the gen 1 cuffs tho

Time to replace my Carhatt with some Milwaukee options. I like the way that you spoke about the handsome look. I need to step up my appearance game cause it does make a difference. I also gonna get some gridiron bib overalls. Thanks for the informational video, Vince!

@VCGConstruction

4 жыл бұрын

Thanks Mel we appreciate it!!

If the heater controls are one the inside jacket, how do you operate the switch while they're zipped together?

Excellent review, im looking to purchase one of these

@VCGConstruction

4 жыл бұрын

Thanks RJ

I habe been a tad put off by the m12 jackets. But i really like this one and may pull the trigger

Nice jacket !!!!!

Great video Vince

@VCGConstruction

4 жыл бұрын

Thanks Antonio!!

Take a shot every time he says jacket , i would’ve just passed out 😵

Thanks my man. I hope all is well.

@VCGConstruction

4 жыл бұрын

Thanks Richard!!

Ordered the wrong thing? Come on vinny? The mr. milwaukee clause is delivering theese to all the big shots this week.

I don’t have a kid but I feel like I just became a dad from watching all these tool videos..

Where can I get one let me know great video once again

Is there a link to that exact jacket and gridiorn shell? I can find it

that is a great jacket i really wanted one last year and ended up making my own lol

@tonyrodriguez4716

4 жыл бұрын

ADD Workshop that's awesome how you make ur own? I would like to make my own also

@makermentality1031

4 жыл бұрын

Tony Rodriguez check out my channel there’s a video

@zacharysherry2910

2 жыл бұрын

Lol yeah we need more info for sure

I need one of these.

I got the XL hope it’s the right size

You guys wing it a bit on your channel... but I gotta give you props.... you're fearless and get at it when it comes to delivering consistent content, which grows that audience. I just hit the bell.

Yo do they beat the shit out of the box.i just got one today and it looked like it was dropped off a building

Hey vince if I was to get this same kit as this the axis layering system with the gridiron could I buy just the hydrobreak outter jacket separately?????

@VCGConstruction

4 жыл бұрын

Yes, you should be able to get the outer layer separately

You look between 5’6”-5’8” that large looks like its sailing on you! I’d go with the medium

Gotta get one just for walk around in MN

@VCG Construction just picked up the dewalt 12 extreme combo kit for 149 and I got the last one on the shelf

@VCGConstruction

4 жыл бұрын

Sweet, let us know how you like it!

Should have listened 1st one was too small cost me 42$ to ship back to buy the size up. Also, looks like the gridiron may have been discontinued?

I may have to invest in one of those. I hate being cold. 👍

@VCGConstruction

4 жыл бұрын

Check it out Gear!

@kingofthecrease30

4 жыл бұрын

i just bought this last week....i got the rain shell option as the layer...its awesome 👍 the grid iron shell option is $299....the rain shell option is $269

Are they gonna make it FR to ?

I used to not be sold on heated jackets and heated outerwear until I tried mine. Everyone laughed when I bought my jacket last year. Driving from store to store just to clear snow from Satellite dishes or to an install when you are not outside long enough to get warmed up, the jacket kept me very warm. If you can afford it, it is well worth the investment. The only thing I wish mine had was a hood but for the deep discount I got it at, I will take the trade off.

How does it feel with a tool belt on?

They should make one with sleeves that warm up too

that is nice I wanted the Milwaukee heated jacket I just didn't know if I should go with the three in one heated jacket or the single zip-up heated jacket

@ryangrissom3532

4 жыл бұрын

I went with the heated sweatshirt. I love it. A little better price and I usually wear a jacket over it if it's too cold anyway working outside in Connecticut winters so it's perfect. Never once have I wished for more out of it. Also i bought my sweetheart 5 years ago and still works flawless and same batteries it came with. I hope this post helps

@ryangrissom3532

4 жыл бұрын

Also I will be upgrading to this charger adapter pack cuz that usb feature is perfect for warm seasons to still use it

Awesome review. 1question, if im 6' tall and 42 chest and 42 waist do you think a medium size would work for me?

@VCGConstruction

4 жыл бұрын

Go on Milwaukee tool website and use the size chart. You want it to fit correctly

U can get a can of spray in a hunting shop that sales waterproofing that u can put on them

Shout out from California with one question. “What’s a jacket”?

@VCGConstruction

4 жыл бұрын

🤣🤣

@ToolShow

4 жыл бұрын

We hate you TAC Systems... we love you... but from Ohio... We hate you. ;)

@VCGConstruction

4 жыл бұрын

🤣🤣

@slader-hl1kk

4 жыл бұрын

Wish i could say that lol here in PA. Although its nice being able to ride a snowmobile

@graigorygilbert602

4 жыл бұрын

LMNO

How to access the control buttons when its covered up?

Are these available in HI- Vis colors???

What’s up Vince my name is Fee. Why yes I do want all of those attributes in My heated winter gear. *eyes peeled*

@VCGConstruction

4 жыл бұрын

🤣🤣

My only gripes with the heated sweaters are they’re so short it pulls up to your shoulders when you bend over. And although the battery placement is good, the shape of the batteries is still annoying.

What about durability? Crawling under mobile homes over old wood and other debris to repair water and drainage lines really beats up my work jackets.

How would you turn the heat on/ off with the extra layer on? Is the top layer thin enough to feel the buttons? I have a feeling I missed this part.

@zacharysherry2910

2 жыл бұрын

Personally I know where the button is right through the layers. It's like a little funny holding a finger on your chest for a few seconds lol no biggie

How durable is it. I’m a laborer and in the sh*t a lot, rubbing against abrasive stuff etc.

Cool 👍👍👍👍👍👍👍✌✌✌✌✌✌

Vince where can i get that axis grid iron jacket for the best price i looked @ acme no 3 in 1s so far ive found for $299 any advice?

@adamlepin8582

4 жыл бұрын

Found it apparently i don't know how to use a website it was on the acme website the whole time

@kingofthecrease30

4 жыл бұрын

i bought the rainshell combo kit from acme...its $269 but since i need 3X my jacket was $279 with free shipping

That’s a nice jacket! Do they have it in women’s?

@VCGConstruction

4 жыл бұрын

Yes they have womens

hey, is that battery pocket big enough for my M18 5amp?

@VCGConstruction

3 жыл бұрын

No

@DarcyWhyte

3 жыл бұрын

@@VCGConstruction that's a shame, as it's be a great jacket with a proper sized battery...

Do you still like it?

I'm not sold on the $100 shell. :(

Hopefully gen 2 is better than gen 1 because the gen 1 was garbage I brought it back 3 days later

the gridiron shell is not 100% water proof...its just weather resistant...they have the rain shell option which is 100% waterproof...i got that one...the only issue is the axis jacket comes in black and the gridiron shell is black too...the rainshell only comes in grey so its mismatched

PLEASE COMPARE this AXIS jacket with the TOUGHSHELL heated Jacket. If you are only buying one Milwaukee heated jacket, which one would you buy? The Axis or the Toughshell??? Thanks!

@VCGConstruction

4 жыл бұрын

Axis

👍👌

Vince go to Sears website 70 percent off tools some decent buys

Imma put a 6.0 in my jacket

I'm an xl at 6 ft 130lb

Meet with the mr. ??? After work. Or the misses. Lol

I wish they will invent one that will cool you electronically

@VCGConstruction

4 жыл бұрын

I believe Makita sells a cooling jacket!!

@danielcortez5457

4 жыл бұрын

VCG Construction yea but is just a fan integrated to a jacket, if it’s 98f it will only blow all the heat in 👎🏻

The old Milwaukee 3 in 1 heated jacket system, which is now discontinued, is better than the new Axis layering system. Wish I could find someone with the old style jackets still on hand or Milwaukee realizes that the old style was better and brings it back into production. The hood on the GridIron jacket for the Axis system is way to big, and in my opinion unusable, the hood on the old 3 in 1 system was more like a hoodie, which I prefer.

Scotchgard the jacket

Can you link a the waterproof option

@kingofthecrease30

4 жыл бұрын

the axis combo kit only comes in 2 options...the gridiron & rainshell...just be aware the rainshell layer only comes in grey while the gridiron option is black to match the jacket

So both jackets are included?

@VCGConstruction

4 жыл бұрын

Yes

@kingofthecrease30

4 жыл бұрын

yes...you can choose between the gridiron & rainshell options but there is a $30 difference between the 2...rain shell is $30 cheaper

But is it brushless?

@VCGConstruction

4 жыл бұрын

🤣🤣

Smakey heated jacket the same quality and material like milwaukee heated jacket. The price is almost 50% of the milwaukee heated jacket. Smarkey heated jacket already include battery and charger inside the package. Need understand Milwaukee , Dewalt heated jacket didn't include battery and charger inside.

How big do they go? Im 6'4.5" tall

@VCGConstruction

4 жыл бұрын

www.milwaukeetool.com/-/media/PDFs/Sizing-Charts/Milwaukee-Heated-Gear-Sizing-Guide-2018.pdf

@canogaparque818

4 жыл бұрын

@@VCGConstruction damn no xl5 Its a no go from me Oh well

@kingofthecrease30

4 жыл бұрын

@@canogaparque818 im 6'5" 330 lbs...i bought the 3X and it fits...its snug but that's good so you can feel the heat better...if its too loose you wont feel the heaters as much

@canogaparque818

4 жыл бұрын

@@kingofthecrease30 i dropped weight but with clothes and shoes im 275ish but i like to layer in the cold seasons and if these are true to size 3xl aint gonna cut it Dont know how you can wear it being taller than me but to each their own i guess ,ill wait till they release 5xls , i normally wear 4xls but on jackets or sweaters its gotta be 5xls

@kingofthecrease30

4 жыл бұрын

@@canogaparque818 i hear ya but that's the purpose of these jackets...no need to layer up...they have heaters in them...i was surprised the 3X fit me...im not so sure they will make a 4 or 5X

I like to party!

First view