Not many can restore A Mercedes V 10 Engine , using only basic tools. These guys are mechanical engineers. Hats off to these Guys.

@Mechanical-Hands

4 ай бұрын

Absolutely! It takes a special kind of skill and knowledge to restore a Mercedes V10 Engine with just basic tools. These guys are true mechanical wizards, showcasing their expertise and ingenuity in every turn of the wrench. Hats off to their dedication and craftsmanship! 🛠️🎩

@Levencon

3 ай бұрын

Да ты гонишь. Они всё перемешали, все детали весь крепёж. Они его добили.

@pssa3215

3 ай бұрын

I hope you are trolling

@Levencon

3 ай бұрын

@@pssa3215 Certainly. You have to tear your hands off for this kind of work.

@pssa3215

3 ай бұрын

@@Levencon this engine won't last 100 miles if you don't realize it 😬

Huge respect to those high end mechanics! Greets from Poland🇵🇱. V10 Benz sounds great

@Mechanical-Hands

3 ай бұрын

Thank you so much for the huge respect and greetings from Poland! 🇵🇱🙌 Our mechanics truly appreciate it! 🛠️🌟 And we're thrilled you enjoyed the V10 Benz's magnificent roar! 🚗💨 Greetings back to you from our team! 👋😊

those smiles, happy faces when the engine roars back to life are priceless. respect for these hardworking incredible craftsmen 🇵🇭

@Mechanical-Hands

4 ай бұрын

Indeed, the smiles and happiness when the engine revives reflect universal sentiments of accomplishment and pride. It's heartwarming to see these hardworking craftsmen evoke admiration and respect from viewers worldwide, including from the Philippines. Their dedication and skill transcend borders, serving as an inspiration to aspiring craftsmen everywhere. Kudos to these incredible craftsmen from Afghanistan, and greetings to the commenter from the Philippines! 🇦🇫🇵🇭🔧👍

I think the older gentleman with the white hat is the master mechanic. Hats off to these guys. 🇺🇸

@ncopp4358

2 ай бұрын

There are more elegant ways of rebuilding this motor (Checking tolerances and machining the surfaces) however, for what they had, they did a pretty good job.

@theshyguitarist

Ай бұрын

There was no guy with a white hat. Lol

@skrettsnerk508

Ай бұрын

​@@theshyguitarist They probably mean the guy that's overseeing the crankshaft and piston installation (starts at around 31:00 +).

just imagine if they had all the tools we had in the western world but I do not think it would make any difference and they look happy enough in fact I admire them nobody is sitting on the phone or laptop nobody is watching the clock wish we could go back to all of this

I am speechless seeing those Afghans engineers operate the V10 engine. No more war among humankind. Let's live in harmony. This is it.

@stevecorcoran9869

Ай бұрын

🤣

@hamix0137

25 күн бұрын

this is pakistan

It amazes me how these guys take engines apart with rudimentary tools along the side of the road in the dirt and remember where all the little nuts and bolts go and make that engine purr like a kitten!…I liked when the old guy came to do the reassembly with the young fellas and checked the clearance on the crank mains…teaching the young fellas!..and they all worked so hard at it!..there was no less than two guys on that engine at any given time and there was at least a half a dozen most of the time…I was glad to see they actually used a torque wrench when torquing the mains down…although I’m not sure if it would matter much because it looked like they reused the main and head bolts…anyways they did a great job!!

@Mechanical-Hands

4 ай бұрын

It's truly remarkable, isn't it? These mechanics are like wizards, working their magic with nothing but basic tools and a whole lot of skill. And seeing the older generation passing down their knowledge to the younger ones adds an extra layer of heartwarming camaraderie to the mix. Plus, their diligence in using a torque wrench shows their commitment to doing the job right, even with reused bolts. All in all, they've done an amazing job, and their dedication shines through in every purring engine they produce! 🔧🌟

@user-yv3mt5mp7g

3 ай бұрын

Да они просто отвафлили его

@nasilemak868

3 ай бұрын

​@@Mechanical-Hands haha nice ChatGPT reply

@chris4321das

2 ай бұрын

@@nasilemak868 💯

@ansmerek

2 ай бұрын

You always know a good engine builder when they spend the time to take measurements. I think he used plastigauge to check the mains which is an inexpensive but highly effect method. My respect to these guys !

I have done to many rebuilds to even remember. These guys are amazing. Not because they can rebuild an engine but because they can rebuild this engine from a pile of parts after they wash it and the thing run sweet thumbs up to you guys hello from Connecticut, USA.

@Trucker0308

2 ай бұрын

I think they clean the parts that are still good but they do replace what has to be replaced, I also noticed that they put new Sleeves on it

@fiorenzo6301

2 ай бұрын

Not the pistons

Big respect from FRANCE

@Mechanical-Hands

3 ай бұрын

Merci beaucoup! 🇫🇷🙌 We appreciate the love and respect from France! 🌟💙 Thanks for tuning in and supporting our mechanics! 🔧👏

@user-br9ub1be3p

3 ай бұрын

Can I find work in France without residency permits?

@thothofatlantis

2 ай бұрын

@@user-br9ub1be3pshouldn’t see why not everyone else is. If not you could sell fake psg shirts on the boulevard

@vincentguyot3029

2 ай бұрын

@@user-br9ub1be3pnon je ne pense pas

@SachaLPB

2 ай бұрын

@@user-br9ub1be3p no, but if you went to france to work, it will be easier to get a pass than other peoples !

I love these people. Even though they have limited support they are able to do the job.

Respect from Germany - the home of the V10! Perfect work!

@achsanuadilandjaja430

3 ай бұрын

are Pakistanian also aryan race like people in Germany ?

@andrijacrncic1111

3 ай бұрын

You missed the century..go back in time and ask Hitler. @Elchle66 give normal comment and you ask idiotic question.

@vanadiumV

3 ай бұрын

and Love & respect from all the world! Quality & Germany are two faces of one medal !

@therodenthitman

3 ай бұрын

@@achsanuadilandjaja430 Don't be such a disrespectful rat.

@dinorossi6611

3 ай бұрын

@@achsanuadilandjaja430 nope

You know when the starter guy makes an appearance, it's getting close. I love how the grizzled old master takes over assembly. Engine sounds good.👍

Ребята из K-Power нервно курят в сторонке!🤣🤗🤝👍

@volchara1471

2 ай бұрын

Ты видел моториста, он как Бог, руку приложил к коренной шейке и вал зажимать перестало🤣

I am impressed, that engine sounds sweet! Well done to those men.

Miraculously (with these tools and workplace) the engine sounds nice. Would be nice to see how the crankshaft was repaired.

@daspicsman

4 ай бұрын

Hopes and dreams mostly

@ronniedoorzon1576

4 ай бұрын

I gues they weld some new metal around it and cut it to size on a lathe.

@nathanhale3006

4 ай бұрын

I'm sure it is within the tolerances of the Mercedes manual.............nah.

@veightrwd8828

4 ай бұрын

Overall, looked legit

@bombacimulayim1453

4 ай бұрын

They changed it, it wont be saved

Masters of their trade! That V10 sounded SO sweeeeeet!

@Mechanical-Hands

3 ай бұрын

Absolutely! 🌟 Our mechanics are true masters of their trade, and that V10 sound? Pure music to our ears! 🎶🔧 Thanks for appreciating their skills and enjoying the sweet symphony of that engine! 🚗💨

I’m digging those OSHA approved sandals they all are rockin lol but seriously they tore that thing apart and put it back together like nothing and then fired that puppy right up nice job 👍

Мое уважение немецким инженерам и немецким рабочим, сделавшим двигатель, который работает даже после переборки в таких условиях.

@agrovic4601

3 ай бұрын

Судя по их одежде температура у них опустилась до + 20, а моторы из серии ОМ очень надежные.

@Dzuba4

2 ай бұрын

Ну по сути они ничего такого не сделали. +- в россии так же на каленке ремонт проводят. У них все четко и по правилам. Даже динамометрическим ключом затягивают. Гильзы новые. Ваще четкие парни.

@sapachevtruckdriver6916

2 ай бұрын

@@Dzuba4 ага, особенно забивание пальца поршня молотком было по правилам :) вылет гильзы померить - не, такого в правилах нет :) Тыщ 300 такому двиглу ходить )

@Dzuba4

2 ай бұрын

Да не спорю что многие моменты не сделаны, но я думаю им проще вот так на коленке перебирать каждые 200-300 тыс. Чем ремонтировать за дохулирд денег и по времени долго. @@sapachevtruckdriver6916

@user-lt9rb1mc3j

2 ай бұрын

@@Dzuba4 ага на всех виде по ремонту двигателей что мерина что скании затяжка проходит в 2 этапа сперва тянут да опрелделенного момента затем маркер и доворот на 90 гр, где замеры колена микрометром?

This people are very intelligent, they all work together , they are a family.

Ma sha Allah, assalaamu aleykum from brothers in Azerbaijan!

@Mechanical-Hands

3 ай бұрын

Wa alaykumu salaam! 🌟 Thank you so much for the warm greetings from Azerbaijan, brothers! 🇦🇿 We appreciate your kind words and support! 🙏 Sending blessings your way! 🕌💫

@user-ll5tx9ww7p

Ай бұрын

Aleykum salam qaqaṣ)

very good work. the engine runs very nicely 👍👍 Greetings from Germany

@Mechanical-Hands

4 ай бұрын

Vielen Dank! It's always a pleasure to receive greetings from the homeland of precision engineering. With a German engine running smoothly, it's like music to the ears! Here's to craftsmanship that transcends borders. Prost from across the miles! 🇩🇪👍👍

@robertmalinowski4887

4 ай бұрын

Vielleicht wenn man die Umstände sieht. Ansonsten sieht eine Motorenüberholung anders aus. Einige Teile würden nicht wieder verbaut werden. Auch wird ein Motor in ein Gestell eingehängt. Alles sehr sehr abenteuerlich ....

ima send my motor to them to get rebuilt I don't care if its outside in the dirt they know what their doing big props to them!!!!

22:38 I always boil my pistons over an open fire while adding just the right amount of seasoning !!!!!!!!!! They are super tender and very tasty......but I NEVER thought of cooking them in an solvent oil can for better flavor. I will give that a try next time. This channel is WAY better than any Gordon Ramsay site!!!!!!!!!!!!!

@katalacasaverde2841

2 ай бұрын

Only a jealous or a racist person can make such a comment. That was bicarbonate soda to help cleaning the rust . They are a real men but you not 😅

@arleigh31burke-zc2om

25 күн бұрын

That's water and detergent, I doubt you ever build an engine if you can't visually distinguish the difference between water and solvent when they're being poured due to their viscosity.

These guys have been teached thru generations, so this is just like a walk in the park.. Good job 👏

for any one intrested it is the Mercedes OM423 engine V10 18.3 Liters. and around 500 Hp

@giovanniluigiperri6686

Ай бұрын

360hp, it's probably the 2636 engine or the old 32

My Respect for this great Teamwork!

Allah bless you. I want to work with you, I am from Algeria 🇩🇿.

These are iconic engines when you see these people with minimum tools being able to repair it.

Did you see any power tools,think what they could do with power tools,thry are the best on this planet bar none.😮

@Mechanical-Hands

4 ай бұрын

Who needs power tools when you've got the sheer force of determination and elbow grease?

@user-ix7ec8hc4k

3 ай бұрын

I myself not a car mecanic, buyed Mercedes from the sixties/seventies because i know, i am able to repair mostly anything by myself with a set of standard tools.

Эти Ребята очень любят свою работу... Я таких работяг ещё не видел.. молодцы 👍👍👍

I think this engine will be able to ride another million miles and I was amazed by their sheer technology

Hard work and graft mixed with team work ! No fancy gadgets and gear :) respect

эти движки делались как раз только для такого ремонта - и живут от капиталки до капиталки.. а парням мастерам респект!

The fundamental is that these gentlemen are displaying skills which we in the west have almost completely lost following WW2. My father was an apprentice mechanical engineer in the early 1930's. By 15yr old he was making his own white metal bearings. At 19yr old he headed up a team of eight guys at an airfield repairing military planes. Much later on when I owned my own garages, if the my mechanics needed a special tool, rather than buy one, my father would design and make one on his lathe/in his small workshop. These cultures where they repair instead of discarding everything makes complete sense ... Our planet DOES need saving and the west's adoration of built in, short life, enforced obsolescence is not the answer.

I expect something much worst, but this is very good job in this conditions with this tools, I see a lot of experience 👍 I wish this hard working mens a decent set of hand and power tools 😉

@FourDollaRacing

4 ай бұрын

Burning oily rags should give you a clue as to what their infrastucture is like....

RESPEKT für euren Arbeit!

@shahidkhon3725

3 ай бұрын

Danke da ist Pakistan

@bbcringegaming

3 ай бұрын

@@shahidkhon3725no its afghanistan stop lying

Glad they showed it start up and run

@Mechanical-Hands

4 ай бұрын

Absolutely! Seeing the engine start up and run after the meticulous rebuilding process is incredibly satisfying. It's the moment of truth that validates all the hard work and attention to detail put into the restoration. Not only does it provide reassurance that the engine is in good working condition, but it also offers a glimpse of its potential performance. Hearing the roar of the engine coming to life is a testament to the skill and expertise of the mechanics involved.

I don't even know what to write, I have no words when I look at it. It's unbelievable that people can work on engines in such conditions nowadays.

Wow well done to those men!!!

very smart, hard hard working good individuals! thanks for sharing!

V10 без турбин. Механический ТНВД. Круто

@user-ev9sb8zw7i

3 ай бұрын

все самое лучшее придумано в 20м веке.

Parabéns pelo trabalho, ficou perfeito 🎉

Brilliant ! Respect ! ..... I did it before and I am ready to do it again any time 🙂 guys never did this before, they have a lot to learn ..... pro and con 's ......

I realy admire their skills, amazing. Guy's keep up the good work

Good work ! Lord bless yours

See the smile? He is very very proud of everything..

No fancy tools, nothing out of this world. These guys will open a shop with a couple wrenches, soap, and gasoline!!! Incredible!!!

Good technical hands , respect from india

Nice one you guys" watched that many full truck re builds where it looks impossible to make good a right off first time watching a engine rebuild ' bloody hell your attention to getting it right is first class a lot of main dealers couldn't work to your standards outside like you do everyday.Massive respect from Robin Hood country Nottingham England

@brianchester4218

2 ай бұрын

Best comment i have read so far, these guys really did pay attention to detail, no grit or dirt any where and well lubricated WOW craftsmen at their best

EXCELENTE SERVIÇO de RESTAURO 👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷

Todays Mechanics are put to shame when these guys out there with basic tools doing amazing work like this.

respects from brazil

These people are real mechanics

Todo o trabalho feito sem qualquer manual de instroçoes isso e obra parabems 👍👍🇵🇹

Pashtuner i Afghanistan and Pakistan is very talented 🇦🇫❤️🏳️☝️

Kind of a sketchy rebuild in my opinion but the fact that they did it anyways and made it work with what they had on hand is pretty amazing

@HunterShows

Ай бұрын

Yeah, but it probably cost a few hundred dollars.

عمل اكثر من رائع و تحية للهؤلاء الشباب المبدع من المغرب 🇲🇦

@ivan_mohov

4 ай бұрын

Похоже, что это Пакистан.

@roporsche

4 ай бұрын

afghanistan.ist ja fast afrika.

Greatest respect for these very smart and extremely hard working people!

Respect to all of you brothers Your are amazing you guys restore the engine with old school tools ❤

only afghans can do so much with so little. lots of respect from an amateur mechanic in USA

@Mechanical-Hands

2 ай бұрын

Glad to hear that

Самое главное все запчасти делают через дорогу!!!

@roporsche

4 ай бұрын

die kurbelwelle wurde wurde wohl abgedreht.benz hat ca. 4 reparaturstufen für die teile.lagerschalen zB. die härtung wäre dann wohl futsch.

@nikolympiysky

3 ай бұрын

@@roporsche они шейки на коленвале просто отшлифовали там, где поверхность металла была испорчена. Ремонт на 1 неделю работы.

@mikhailrazdobarkin

Ай бұрын

Другой вал они поставили старый был убит напроч

Io a smontare sono campione del mondo poi quando lo rimetto assieme mi avanzano sicuramente 3/4 pezzi , di accenderlo non se ne parla propio ! Scherzo e ammiro questi meccanici che senza attrezzi e senza officina aggiustano e fanno ripartire un vecchio motore Mercedes 10 cilindri da camion👏🏻👏🏻

This is the first rebuild ive seen where they know what theyre doing. Even with limited resources they cleaned out all the passages and used a torque wrench for critical fasteners. Even used plastigauge for bearing clearances. Good work guys

@arleigh31burke-zc2om

25 күн бұрын

Not plastigauge, he used paper and oil, more impressive in my opinion. He turn the crankshaft with the wet paper installed and then check the paper. If all the oil wrung out and the paper is too dry then it's enough clearance.

That sounds sweet nice job men from London 👌👌

Brand new engine ready to run at least 1M kms now. Excellent work done by experimented mechanics !

It’s such a pleasure to watch you guys work, old school style! Thanks 😊

I’m hoping these guys put an AMG plaque on it at the end with all of their names.

@shakke52

3 ай бұрын

ahahahhahah

@itz.waleey

3 ай бұрын

Yes!! Very well said....

уф,показалось,думал всё пропало, ключ приобрели ,динамометрический, ан нет смотрю, просто трещётка)

@Ramildin

3 ай бұрын

Это лишнее согласен

@sergei308

3 ай бұрын

Это динамометрический ключ,только чуть ли не из позапрошлого века. Не любят это ребята современный инструмент)....

@ubun2936

3 ай бұрын

@@sergei308они мне кажется до сих по почте письма пишут

@TAPSAROY

Ай бұрын

@@sergei308 в рaшке 70% нaселения ходит срaть в яму, видимо тоже не любят современные приспособления

Oh how my heart sank when those sleeves were proudly unwrapped, and then stacked next to all the other components, all now taking their chances with the dust, grit, dirt and swarf laden environment.

Imaginen a estos mecánicos con herramientas de última generación. Son muy competentes.

Ассаламу алейкум! Я элементарно коробку передач обычными ключами не могу снять. А они делают это на ура ! Мир вам !

beautiful ,simple, fixable engine... hard not to fall in love.. wonder what year though.

@hannes7348

3 ай бұрын

I own a truck with exact the same engine - it's from 1988.

Non è semplice ripristinare un motore del genere, siete dei bravi ingegneri 😉👍🙏💙

Greeting from Bulgaria! Big respect for your hard work and skills!

Поршни помыли в тазике губкой - красота!

Прекрасное видео! Ламповое, домашнее какое-то) Родиной веет. Но всё будет работать как надо, я в этом уверен. Имея те возможности какие у них были сделали по максимуму. молодцы!

@Jon-rv8rg

3 ай бұрын

чисто мастерски )

@_Pretender

3 ай бұрын

...может воняет???😂

@pavelnikolaevich2120

3 ай бұрын

@@_Pretender Родина есть Родина. Своё ... не пахнет!

Satisfatório, parabéns a todos os mecânicos que ressuscitou o mercedão 👏🏻👏🏻

Motoru tadilat yaptıktan sonra çekiciye yüklenip gitmesini gururla seyreden ustanın kazandığı para helaldir

Master builder is a pro. i bet he made hundreds of rebuilds.

@user-ix7ec8hc4k

3 ай бұрын

That is not a big thing, if you have 200 pre-1979 DB Trucks on scrapyard.

Вот это я понимаю ручная сборка ❤х

Excelent work great skills in very poor conditions and with very basic tools . Great video showing these mens skills and work ethic . Thank you all

The cleaning in that mud is spectacular

First time for years , seeing a speed brace in use .

Thanks!

@Mechanical-Hands

4 ай бұрын

Thank you so much for your generous support with the Super Thanks! Your support encourages us to keep striving for excellence and delivering valuable content to our audience. We truly appreciate your support! 🙏😊

Big respect from Poland :)

There is greatness even in scarcity. Learn to be humble and use what is provided to you to shine at your best.

Snap-On truck drove up, guys looked up at him and said be gone devil.

@tassie302gt

4 ай бұрын

That cracked me up

@becassier410

4 ай бұрын

Bravo les gars 👍 vive Le matériel sans électronique 🫵💪👋🇫🇷🇫🇷🇫🇷

@g-man7938

4 ай бұрын

Not everyone has to have the fancy, over priced, snap on tools.

@g-man7938

4 ай бұрын

Evidently there's enough meat on the bone for everybody.

@peaceandlove.2932

4 ай бұрын

😂😂😂😂😂😂that's a good one bro

Torque specs? Haha tight is tight my friend.😎

SUPER JOB ! - BRAVO !

Hats off to these men and may God bless them, cheers from Canada

İşinize saygı Türkiye'den selamlar

That is one sweet diesel engine; i would love to put that in a Ford F350 or Chevy 3500 with a manual or auto trans; whatever I could find that would fit.

@HunterShows

Ай бұрын

It's massive.

BIG RESPECT !

Legendary Mercedes-Benz OM 403 ❤ Amazing work 👌🏻

Ба,знакомые лица. Тут,есть видос,как коробку капиталили,походу от этой тачки,рекомендую к просмотру.подозреваю,это ремонт в официальном дилере Мерседес )))))

@user-fz2iu9sz4n

3 ай бұрын

😂

Думал прокладки тоже постирают и потом на место 😄

Convertingly handsome, I look at these mechanics with very high admiration.

Amazing job folks.

OM 403 .....good engine from Germany :-)

@Mechanical-Hands

4 ай бұрын

Absolutely! The OM 403 engine from Germany is indeed renowned for its reliability, performance, and durability. Manufactured by Mercedes-Benz, the OM 403 is part of the esteemed OM 400 series of diesel engines, known for their robust construction and efficient operation. These engines have been utilized in various applications, including commercial vehicles, buses, and industrial machinery, earning a reputation for their power and longevity. With advanced engineering and meticulous craftsmanship, the OM 403 exemplifies the high standards synonymous with German engineering. It's no surprise that enthusiasts and professionals alike hold the OM 403 engine in high regard. Its combination of German precision and engineering excellence makes it a standout choice for those seeking dependable performance and longevity in their vehicles or machinery.

@KingIrbisandComrades

4 ай бұрын

@@Mechanical-Hands noobs - this ОМ423

@UnamedUnamed-tq5mt

4 ай бұрын

Нихт,from Pakistan!

@user-ev9sb8zw7i

3 ай бұрын

Achtung.der motor ist jetzt pakistanisch!!!!!!!!!

43:08 "As per Mercedes guide, crankshaft must be tightened in three stages following a specific pattern and torque values" Random Middle Eastern guy with a pipe on the allen key: Allah is the only guide I need.