I appreciate the video. I just got the same turn signals in and I'm installing them this coming weekend!

@GregPettus

5 жыл бұрын

Nice!!!

Man, I love you videos!

@GregPettus

5 жыл бұрын

Thanks!

Hey Greg. I ordered these lights from the link in description and haven't heard anything back in over a week now. Is this your store? And if so how can I get an update on my order?

I got the same one as you I put the black wire to negative and red wire to the fourth one down with a 7.5 amp fuse but it wont turn on with the car and both blinkers go at the same time. If I use a fuse that the DRL do turn on blinkers work great but DRL lights wont turn off with the car. Any suggestions?

Pick a color and then buy a led bulb for your parking lights ! I just made mine blue Because my car is black. It looks reallly good with the C shape drl. Give it a try Nice video I been watching them all

@GregPettus

5 жыл бұрын

Thank you!

Is it possible if I can get a link to your front lip?

This makes me want to buy these turn signal.

@GregPettus

5 жыл бұрын

Do it!

Wat did u use for ur fuse tap.?

@Greg F. Pettus Are those resistors you've used for the turn signals a must? I'm planning to install the switchback lights (both replacement for turn signals and fog lights cover) on my Mazda 3 '15 saloon but I'm unsure if the resistors need to be used or not. (Also a total novice in the electronic department.) Oh, and very great and useful video, going to put this into practice soon :)

@GregPettus

4 жыл бұрын

Some models came with resistors built in. I just did it just in case. Maybe try it without one and you can always go back and fix it in the future

Could you make a video on how the borla exhaust sounds in the cabin of the car while driving?

@GregPettus

5 жыл бұрын

Yeah I can work on that.

Hope you keep making these videos for Mazda 3 Skyactiv! ☺️

@GregPettus

5 жыл бұрын

I will I will!

@timsavvy

5 жыл бұрын

@@GregPettusguys like you are the reason why we will stick with our Mazda 3 Skyactiv for a very long time. ❤️

Awesomes videos🔥

@GregPettus

2 жыл бұрын

Thank you!

what does the yellow cable get plugged into

Damn they look good! So close to 2.5k subs also, keep it up! (Is that a vett in the garage? whens that coming to the channel? :P)

@GregPettus

5 жыл бұрын

haha it may come to the channel.... I will make it happen.

A year later but question, I have Mazda that didn't come with fog lights but I've found out you can just install them + the shifter if you want. Do you think/know if there might be any problems trying to install this in addition with that?

@GregPettus

3 жыл бұрын

Shouldnt be any problem

Great video bro!!!

@GregPettus

5 жыл бұрын

Thanks dude!

@davidsiryk9223

5 жыл бұрын

Greg F. Pettus your welcome and dang thanks for replying and also I just bought a 2017 Mazda 3 so can I put in the same light as you did or do I have to buy different ones?

@GregPettus

5 жыл бұрын

Have to buy different ones. there is two 2017 models. Ones like mine and a lambo one. You can see each one of them on my website

@davidsiryk9223

5 жыл бұрын

Greg F. Pettus oh ok Nicee whats your website?

Been trying to get sequential lights for my car but it already has DRLs. Really like the idea of these but not fond on the black separations, would rather it being one solid line when it's on. Do you reckon I could mod these to do it?

@GregPettus

3 жыл бұрын

There are ones that are solid for sure

question now i use some resistors like the one you used and they get real hot I seen some vids that recommend not to put them next to plastic is that some thing u agree on?

@GregPettus

5 жыл бұрын

I agree. If it stays on for a long period of time they get really hot. So placing it on plastic might be a bad idea. I will check mine from time to time and make sure everything is ok

Was wondering if there was a way to personally contact you, the email provided does not work!

Thanks for the video Greg. Would leaving the blinker on for a few minutes, say at a light, cause the resistors to get hot enough to melt the plastic housing?

@GregPettus

5 жыл бұрын

That is a solid question. It shouldnt but that is a concern. I should test this out and make some modifications and update everyone.

@muckeyn

5 жыл бұрын

Greg F. Pettus that’d be awesome. I may test it myself with a infrared thermometer when I install my lights but not sure when I’ll even get around to it.

@rob23241

5 жыл бұрын

Greg F. Pettus what size fuses did you put in both slots of the “mini fuse tap”?

@GregPettus

5 жыл бұрын

@@rob23241 15 amp fuses

Great Vid. Connecting to the ACC powers it when the car is on and turns off when the car is off?

@GregPettus

5 жыл бұрын

yes.

@dakotatuck8352

4 жыл бұрын

what pole of the acc would you have to wire it to? how do you determine the poles in the Accessory

Any link for buy it?

Can this fit for my 16’ mza 3 hatchback basic model ( i sport )?

@GregPettus

5 жыл бұрын

Yup! Fits 14-16 all trim levels

Nice bro

@GregPettus

5 жыл бұрын

Thanks!

Can these be seen during really bright sunny days? Because the switchback DRLs is pretty dim and can’t be seen by oncoming traffic from 3metres and further especially when using turn signals...

@GregPettus

3 жыл бұрын

Its pretty bright

Hey the DRLs around your fogs are similar to the ones I have. My box is in the same location as yours. Did you ever have issues with them turning off by themselves? Mine seem to always turn off when i sit still too long, kinda like it's over heating.

@GregPettus

3 жыл бұрын

First make sure what its connected to has enough power. Then make sure all the commections are away from heat

@micaiahreese

3 жыл бұрын

Greg F. Pettus mkay thanks, I think I may know which wire is causing the over heat, I'll probably move the box just in case when I install my intake this weekend. Have a good one 👍

Where did u get the headlights to match them at

@GregPettus

2 жыл бұрын

Got 5k HIDs from amazon. Make sure to also get a relay harness so the voltage is constant

Is there any way to wire it to the park light? I prefer having the option to turn them on or off whenever I want to

@GregPettus

4 жыл бұрын

I believe that should work. Also can route a switch to the inside if needed

@aminutewithjuanito7726

4 жыл бұрын

Greg F. Pettus hey Greg, I am wondering if the white LED can be connected to the lowbeam light fuse or highbean. Reason is I have so many drls and wanted to just use this for sequential turn signals and just turn on the white LEDs if its night together with headlight

do they exist for a 2017 model ?

@GregPettus

3 жыл бұрын

Yes

Do you by any chance do installs?

@GregPettus

4 жыл бұрын

Depends on where you are at.

@ZioSolo

4 жыл бұрын

California, Orange County. I can always drive to you 👍

@GregPettus

4 жыл бұрын

@@ZioSolo i actually dont have a driveway currently so wouldnt be much help.

@ZioSolo

4 жыл бұрын

No worry's. Figured I'd at least ask. I'd still be interested if you have the time, thanks man 🙏

I'm guessing you work as a car dude? The average person doesn't know this much about wiring and electrical stuff. Also how long did these last? I'm always hesitant to buy Chinese lights. If one goes out it seems like it would be a Huge hassle to replace

@not-AI

3 жыл бұрын

That's why I haven't done it, those Chinese lights look super cheap compared to the OEM hardware he removed

"me (a german) searching for stuff to upgrade my mazda..." "finds this video..." TÜV say's: "dont you dare"

Thanks. However I followed the video but was unsuccessful with the fuse you used. I ended up tapping power from the 15A fuse labelled Engine1 and added a 7.5A fuse for these lights. Also my install did not require load resistors. Prior to final install I tested the lights on the car without load resistors and it worked, so I didn't use any.

@GregPettus

5 жыл бұрын

Be careful with the engine1 fuse.. if thats a main function one you might have issues if this shorts out. As for the load resistors. It was preventative. Some people had some issues so i just made sure. Good to know it works without it

@daren226

5 жыл бұрын

​@@GregPettus Thank you. Yes i intend to find another source to tap off from.

@zem936

2 жыл бұрын

@@GregPettus Which Fuse did you tap (and it's function)? That goes off with the engine.

@GregPettus

2 жыл бұрын

@@zem936 I tapped it into the accessory lights to make sure they go off with the engine.

I was all for it until you said "take the bumper off"

@GregPettus

2 жыл бұрын

Haha its all clips and screws. Goes right back on. Dont force it