A great simple mod. Thanks for the idea. Looking forward to seeing it in action.

@PapaSmurf918Detail

4 жыл бұрын

Thanks, Chris. Definitely simple and well worth doing👍 hoping to get it on a car and see what it can do asap! Appreciate you watching and commenting!✊

Great video Papa.. I couldn't see anything when you showed the before of the spinning. Great mod Taco man!

@PapaSmurf918Detail

4 жыл бұрын

Thank you! Man, idk what happened. It showed just fine in my editor. My apologies!! There was no free spin in the backplate. This helped a lot

Definitely a notable difference.. I remember that vid..I just swapped the grease (hand lotion🙄) in my M1000 a few weeks ago..its a lot quieter than before🤘🏻

@PapaSmurf918Detail

4 жыл бұрын

Absolutely a difference.. much smoother and quieter. 🤙🤙 can you believe the grease in them from factory? Sheesh!!! Thanks for watching man!👍

Great video brother! Man there was barely any grease in there. Looks like the homemade washer mod worked great. 🌮 X4 for you!! 😂

@PapaSmurf918Detail

4 жыл бұрын

Thanks brother!!! Yeah I was shocked at how little was in there. It definitely made a difference. Looking forward to using it again! 🌮🌮🌮🌮 and a BONUS 🌮 LOL🤣

You are so right after you use a long throw your job goes a lot faster. I have Adams 15mm swirl killer works ok but after I purchased Griots G21 guess which one is my go to. The G21 is a lot quieter to. It’s nice to have a variety of polishers makes your detail more enjoyable. I just spent 25 hours on my corvette I will post a picture on the chat tomorrow very happy with the results. Need to change your handle to Papa smurf detailing your making good videos need people to find your fine work. Cheers.

@PapaSmurf918Detail

4 жыл бұрын

Man, I was just talking with Brian ( FAB )About the new G21 that will be coming out. I'm pretty sure I'll be picking one up. As long as this M15Pro works well in the field! 25hrs?? Man I can't wait to see it! Appreciate you watching man! Haha idk about PapasmurfDetailing🤔🤔 there are some who wouldn't consider me a " detailer " LOL but totally hear where you are coming from! Take it easy, see ya in the chats!

Very nice. I did see Apex’s video on greasing the MaxShine polisher but still wasn’t sure if I needed to do this. Going to give this a shot. I’ll contact you if I can’t put it back together!

@PapaSmurf918Detail

4 жыл бұрын

Thanks, Ryan!! Hahaha I have faith bit if you need me I'm here!! If definitely worth it!!! Keep me posted!🤙🤙✊

@ryanmulhearn8843

4 жыл бұрын

PapaSmurf918 I finally did the regrease and washer modification on my MaxShine. Your video was very helpful!

@PapaSmurf918Detail

4 жыл бұрын

@@ryanmulhearn8843 awesome Ryan! Glad my video was helpful buddy!! 👍👍

Great how-to video! Please do another tutorial on replacing carbon brush on the maxshine. Thank you so much!

@PapaSmurf918Detail

Жыл бұрын

Thank you! Appreciate you taking the time to watch! I'll definitely do that when time comes to replace!👍✊️

Great job of demo and explanation. Thank you.

@PapaSmurf918Detail

10 ай бұрын

No problem! Thank you for taking the time to watch!

Very nice , I did something similar as well. I also noticed the M15 Pro seems to really show more power at higher speeds as well.

@PapaSmurf918Detail

4 жыл бұрын

Thank you! Yes, it needs to be at least 4.5 to kick in good. It was stalling soooo easy before. I mean Hardly any pressure. Now I've gotta really put it to the test! Appreciate you watching! 👍👍

@AmirAbdullah

4 жыл бұрын

PapaSmurf918 I also seen it stall with different pad and polish / compound combos as well. Like if the polish is too thick and the pad is too aggressive it’ll stall. You with like the super heavy duty compounds. So I switched up to mostly Xtreme Solutions stuff and I’m not stalling nearly as much , same with the Sonax Cut max. I also noticed the longer microfiber cutting pads work good with the M15 Pro vs A shorter nap microfiber. But I also use Oberk Supreme Cut and that cuts well with either a short or longer nap microfiber. And something on a side note if you buy this stuff it’s called Black Soap it’ll be kinda multi color , a super all natural soap and wash your pads with it they come super clean. And they seem to perform better after being cleaned with it. Just my experience.

@PapaSmurf918Detail

4 жыл бұрын

Thank you! That's awesome tips right there and you are right! I have noticed depending on pad Compond/polish combo if its grabby it tends to stall easier. I'll be putting it through its tests in the next few weeks👍 hoping its tolerable if not oh well. I tried! Appreciate all the information man! Interesting soap you mention I'll for sure look into it! Right now I use my own homemade recipe I've almost got it dialed in. Once I do I'm going to share. I cleaned all my pads from the other day and it worked VERY well🤙take it easy my friend!

Great video thanks man

@PapaSmurf918Detail

4 жыл бұрын

No problem! Thank you for watching!👍

Just what I needed! The MECH Smurf!

@PapaSmurf918Detail

2 жыл бұрын

Hope it helped you out brother!!!👍 appreciate you watching!

I just bought me one of those and I’m also going to put new grease , but I’m going with aero shell 33

@PapaSmurf918Detail

3 жыл бұрын

Awesome man. Yeah literally anything is better than what's in it! You will see haha. Appreciate you watching!

I swap the grease on cordless adams polisher and feels better out the box it’s junk feels like a hammer my dewalt dual action cordless very smooth and powerful now that’s a machine!

@PapaSmurf918Detail

3 жыл бұрын

Ahhh deng! Yeah, can't go wrong with Dewalt! Thanks for tuning in man!!

nice video production intro.. 👌🏻

@PapaSmurf918Detail

4 жыл бұрын

Hey thanks ,Mark!!! Appreciate that! Figured all the cool kids have an intro why not me!😄 thanks for watching my friend!!

@catguy64

4 жыл бұрын

PapaSmurf918 When I saw you break out pad & pencil with the spacer measurements I laughed, thought you were doing a West Coast edition of John The Forensic guy on us. 🤣🤣🤣 I love it-it's all in the details!

@PapaSmurf918Detail

4 жыл бұрын

@@catguy64 hahahaha!!! I was just trying to make myself look smart!!!😎😎🤣🤣 man that's funny!

Informative video! I'm looking to buy my 1st da. Any suggestions? 5inch plate was suggested to me so I could run a 5.5 pad. Maxshine m8s looks good and inexpensive.

@PapaSmurf918Detail

4 жыл бұрын

John, thank you!! The Maxshine M8s is a great entry level polisher at a great price. There is Also the Griots Garage G9! The G9 will run a little more than the M8s but either one will be just fine. If your on a budget go for the M8s. I too prefer the 5" backplate for sure. The M8 comes with the 5" backplate. G9 comes with 6" so you would need to buy a 5" backplate. Another 20 bucks. Either way you will be ok. Depends how much ya wanna spend!!

@johnwagner4559

4 жыл бұрын

@@PapaSmurf918Detail Thank you. Yeah, it's nothing that I'll be using alot, just on my car. Diy'er, that's me. Just looks like so much fun and satisfying. My car paint is in great shape really, just some light swirls and a few scratches here and there. Thanks much! IIL get the machine then. Orange pad and 3D1 should do the trick I think.

@PapaSmurf918Detail

4 жыл бұрын

No problem! Sorry for late reply! 3d One and orange medium cut pad would yield some great results!!👍please let me know once you get it and get to use it. Love to hear your feedback from experience 🤙🤙

That looks like "Lard". Looks like Maxshine would have done better than that as much as they cost. I put to much grease in my H F. Great video

@PapaSmurf918Detail

4 жыл бұрын

Haha lard is s good word! I couldn't believe how dry the ring gear was! Definitely much smoother now. Lol yeah I packed mine flush with the housing... needless to say a had a mess to clean up. LOL thanks for watching!🤙🤙

Smurf i got the pro no real problems, just wanna change the grease. I did it in my 3 inch 12mm sk n it runs so much better

@PapaSmurf918Detail

3 жыл бұрын

What's up man! Yes, swapping the grease definitely makes a big difference 👍👍 did all mine lol. Appreciate you watching my friend!

Muito bom e esclarecedor o vídeo! Valeu!

@PapaSmurf918Detail

3 жыл бұрын

Idk what this says but thank you!!!

@f314nato

3 жыл бұрын

@@PapaSmurf918Detail very good and enlightening the video

@PapaSmurf918Detail

3 жыл бұрын

@@f314nato awesome 👌 thank you my friend!!!

Here i am commenting about this video more than a year after it was posted. I'm looking to upgrading my 7+ yrs old Harbor Freight Chicago Electrical DA polisher. I am leaning more towards this product compared to the Rupes. First, I'm more of a weekend detailer for my own cars. Second, the price. Third, warranty wise maxshine/ shinemaster has better coverage. My question is regarding the washer as I didn't see the OD & ID sizes in the description nor the comments. By any chance you know the specific size?

@PapaSmurf918Detail

3 жыл бұрын

Dean, well thanks for watching an older video!! As far as the washer size, I'm not 100% sure. They come with a washer in the box but I needed more. And Instead of ordering 2 more to try for a total of 3 I just machined my own. But, the washers although did make a difference It still stalled on me. If I were you, I look into the series II Maxshine 15mm.. it's a great entry level polisher.. I just picked up the new shinemate ex620 15mm as well. Another polisher fairly new and around 250. It's been getting phenomenal reviews. 👍 worth a look much friend!

How did u break lose the counterweight screws cause I wanna do the same thing but I don't wanna strip them

@PapaSmurf918Detail

3 жыл бұрын

Julian, I used my drill. And make sure you get the correct bit and the you gotta lean into the drill.. put some bodyweight behind it👍👍

PapaSmurf you have the griots g9 and maxshine polisher which one is better quality or which is better for you in your opinion?

@PapaSmurf918Detail

4 жыл бұрын

Raul, they are both great machines. As far as quality? I'd give it to G9 just a little. The M15pro is very well built minus the crappy grease. The G9 Comes with Mobil grease which is a good grease ( is what they are saying) so no need to swap. That's the edge. We will see how this upgraded M15pro works and I'll have to see if it changes my mind for my go to polisher 👍👍

@raulvalle4920

4 жыл бұрын

@@PapaSmurf918Detail thanks for the reply 👍

@PapaSmurf918Detail

4 жыл бұрын

@@raulvalle4920 not a problem man!!🤙🤙

Cool intro!!!! How do you make that?

@PapaSmurf918Detail

4 жыл бұрын

Thanks, Hank! Was fun to make. Just took bits from different videos and put them all together.. I use Kinemaster ( as I'm sure you know haha it's got the watermark on my vids ) it's free.! I do everything from my Android phone. I really need to invest in a nice laptop or desktop 😄😄

@henryfreeman6113

4 жыл бұрын

PapaSmurf918 ok thanks!!

the M21 Pro It overheats when I put it on level 6. Why is that happening?And what bad pack?

@PapaSmurf918Detail

2 жыл бұрын

Well I personally never... ever run mine about speed 4-4.5 speed 6 is just too much. It's not needed in my opinion. Pad choice will vary depending on paint conditions and desired defect removal you want.. rupes pads are good. Lake country pads. Griots pads. Ect.. stick to foam to start and as you grow kore confidence bump up to more aggressive urofiber or microfiber pads👍👍

Any washer I can pick up locally? Love the power of the machine but the stalling is nuts

@PapaSmurf918Detail

5 күн бұрын

Unfortunately most DA polishers have stalling as a " safety " thing lol. Nothing local I don't think unless you have a local detail shop that sells polishers. I'm almost to the point of getting a rotory. These newer cars have so many body lines where you need to manipulate the polisher.. it's easier to use a 2" mini polisher but takes to long. Definitely, the maxshine has power.. still use my M15pro here an there. 🤙🤙 appreciate you taking the time to watch!

@kristofferpence

5 күн бұрын

⁠yeah I hear you haha. Been thinking the same. I got mine locally and strangely it did not come with any washers haha. But I will tell you I rocked a chemical guys 8mm machine for a few years- got the job done, but this stalls way more than that haha. I saw somebody throw a normal washer on, I have no means to cut one haha. May give it a try and see what happens 😂. I just know that it supposedly affects cooling

@PapaSmurf918Detail

5 күн бұрын

@kristofferpence nothing wrong with that! Whatever gets the job done🤙 yeah, that's odd mine all came with a washer! Lol contact maxshine and say hey send me a washer or sent me another unit 👍 worth a shot!

for those who dont have the ability to make a washer, any suggestions?

@PapaSmurf918Detail

Жыл бұрын

Absolutely! Any manufacturer should have them available. They typically include them. If not contact the manufacturer and they SHOULD be available directly through them👍

Do the washers come with the polisher?

@PapaSmurf918Detail

3 жыл бұрын

Kris, yes. They come with a spacer. Mine actually had one already installed and then came with an extra one. I needed more so I had to make my own.

Hi, which one did you prefer more, the Maxshine or the Shinemate Ex620?

@PapaSmurf918Detail

2 жыл бұрын

Hey there! Ima go with the Shinemate as of now. Been using it for a while and I love it!👍

@huzaifavawda8383

2 жыл бұрын

@@PapaSmurf918Detail Thank you for that reply, Im guessing you went with the 15 over the 21mm as well?

@PapaSmurf918Detail

2 жыл бұрын

@@huzaifavawda8383 no problem at all! Yes, I have the 15mm.. 21mm is ok for the bigger flatter panels.. but let's face it. Unless your doing vans and bigger vehicles ehhh I'll opt for the 15mm. 👍

@huzaifavawda8383

2 жыл бұрын

@@PapaSmurf918Detail That makes perfect sense, thank you so much

@PapaSmurf918Detail

2 жыл бұрын

@@huzaifavawda8383 Anytime my friend 🤝

Where can you purchase extra washers mine only came with one. And it is making a horrible whining noise.

@PapaSmurf918Detail

4 жыл бұрын

Bee. You know I'm sure they have then from just about any site that sells polishers. Or even Amazon. However I didn't want to wait and then have to stack of 6 washers so that's why I opted to make my own👍 as far as the whining noise that could be an issue. Which polisher do you have? Is it the M15Pro? If so I'd contact maxshine before taking it apart because if it's a faulty machine they won't do anything if you took it apart.

@beejay8719

4 жыл бұрын

@@PapaSmurf918Detail it's a M21. No I haven't taken it apart. I thought about taking it apart to put some more grease in it but I was like no. It shouldnt be making this noise and supposedly brand new.

@beejay8719

4 жыл бұрын

I am glad I purchased the G9 now.

@PapaSmurf918Detail

4 жыл бұрын

@@beejay8719 ok. I'd definitely contact Maxshine and let them know what your experiencing. They will probably send you a new unit.

great vid. i turned away for a second then all of a sudden your daughter's hand appeared in the vid, and i jumped back off my chair like a horror flick.

@PapaSmurf918Detail

3 жыл бұрын

Hahaha thanks man! 😄😄

Any update on the Maxshine? I think it is one of the best in this pricerange. Almost as good as Rupes? How is it going with it?

@PapaSmurf918Detail

4 жыл бұрын

Tomas, yup. So after this washer mod and grease it seemed better. But soon as I got it on a car with a different pad that had some bite it was still stalling like crazy. I didn't get it. Contacted Maxshine and they said to send it in. They then contacted me and said they couldn't fix it due to not having the parts so they upgraded me to the M15pro series II and I absolutely love it. Muuuuch better than the original pro version. Plenty of power. Done 4 full jobs with it and its awesome 👍🏻 I have a video on the series II if you wanna check it out as well as just purchased the M21 Pro👌🏼. Agreed that for the price they are great. I've never used a Rupes so I can't compare. But, in my world they work just fine✊🏼✊🏼

@tomasaro4910

4 жыл бұрын

Thanks for the fast answer and I am really happy you got a new better serie 2 unit. How do I know it is a serie 2. I have one home with white front cap, white trigger, 1000w motor. I say Maxshine M15 Pro but how do I know? Did first serie look different? Anyway I like your channel and following it (I live in Sweden). 👍😀

@PapaSmurf918Detail

4 жыл бұрын

No problem my friend! If you have the white head and white trigger that is the series II 👍🏻 the non series II is all black. Appreciate the support on the channel 🤝🏻

@khristian9579

3 жыл бұрын

@@PapaSmurf918Detail I just ordered the Series II as my first polisher. Is it good to go out the box or did you still grease swap it

@PapaSmurf918Detail

3 жыл бұрын

@@khristian9579 awesome man! You can definitely use it out of the box but I'd swap out the grease. They don't recommend it cause of warranty stuff BUT I did it. Its needed. Be careful with the small Phillips screws as they are really soft. Strip easy. I definitely felt a noticeable difference and improvement in smoothness and it's a tad quieter as well.

Did you notice if the grease altered the sound of the polisher?

@PapaSmurf918Detail

3 жыл бұрын

Chung, to me it's a smidge quieter. It's like the gear chatter is a little more quiet

Thanks for the effort. However, even after your mods, the backing plate mark still rotates very slowly with just a little pressure. It still slows way too easily. Also, you were working on a flat panel. Try the same test on non flat and it will stall. This polisher isn't the ticket, IMO.

@PapaSmurf918Detail

4 жыл бұрын

It is a flat panel.. and it's much better than it was before.. it's taking a lot more pressure to bog this thing. I was putting way more pressure than I would be during use anyways. It's not the best that's for sure. But improvement is improvement!🤙 thanks for watching!!!

@c6z061

4 жыл бұрын

PapaSmurf918 fair enough. Didn’t mean to insult you. I bought this polisher, used a washer and was still far from impressed, so I’m a little biased. Luckily I could return it. Thanks for your videos.

@PapaSmurf918Detail

4 жыл бұрын

Mark No insult taken my friend!!! 🤙 I wasn't impressed either after putting on a few cars. I'm hoping this will at least make it tolerable. If not oh well. Hoping to test it this weekend 👍 There's always to new Griots BOSS G15 OR G21😁😁

@c6z061

4 жыл бұрын

PapaSmurf918 awesome! Yep, I saw the new griots and it’s not expensive! 👍🏼

@404notfound.....

4 жыл бұрын

Great video! And a definite improvement!! And ya right, ya gonna get around the car faster with the long throw.

Nice intro

@PapaSmurf918Detail

4 жыл бұрын

Yo what's up Steve! Thanks man! I tried to throw a little something together😄🤙🤙

@OuzoLouGarage

4 жыл бұрын

@@PapaSmurf918Detail great idea on replacing the grease. Stay strong eat tacos

@PapaSmurf918Detail

4 жыл бұрын

Ouzo thanks bro! Sorry for late reply I been going through my comments and seeing all these replys and I'm not getting notified!!!!

My da polisher keeps stalling sometimes it runs and sometimes it don't I charged it up today again because it is a battery operated da polisher but when today was trying to use this denim 2,000 disc on my da it kept starting and stopping immediately. I don't know how to fix it got it off Amazon could just call them about the issue

@PapaSmurf918Detail

3 жыл бұрын

Possibly a battery issue my friend. I'd definitely contact Amazon and see if they will take it back and refund money 💰. For either a new one or a different one👍

@zanaga1901

3 жыл бұрын

@@PapaSmurf918Detail I am getting a replacement tomorrow for the one that seems defective to Amazon.

@PapaSmurf918Detail

3 жыл бұрын

@@zanaga1901 awesome. Keep me posted bud!👍

@zanaga1901

3 жыл бұрын

@@PapaSmurf918Detail I got a replacement da polisher today from Amazon but gonna send the original back soon. Now can get this orange peel removed on vehicle but there still are spots where the color ain't blended in right lighter spots.

@PapaSmurf918Detail

3 жыл бұрын

@@zanaga1901 awesome.. yeah orange peel is nasty especially when there's a lot of it!

Put some grease on the washer to hold it 😉

@PapaSmurf918Detail

4 жыл бұрын

I thought if that. But I didn't want it to somehow fling out of the center LOL

Finally! 🤣

@PapaSmurf918Detail

4 жыл бұрын

Finally what!?🤣

@keithfirebird7618

4 жыл бұрын

@@PapaSmurf918Detail Your daughter talking lol

@PapaSmurf918Detail

4 жыл бұрын

@@keithfirebird7618 ohhhh!!! Hahaha ok ok. 😄

Use the Low Pro foam Pads ... Use wool pad whit foam interface ... You are going to see the Light again .. Stall is going to be in the past

@PapaSmurf918Detail

3 жыл бұрын

Great tip david! I've noticed the thicker pads had more drag... however since I've upgraded to my series II... no issues there at all. Much better unit! Thank you for watching!

@josea7422

3 жыл бұрын

@@PapaSmurf918Detail did you also swap grease on the pro II? And what grease? Thanks

@PapaSmurf918Detail

3 жыл бұрын

@@josea7422 yes I sure did! All 3 of my polishers I've swapped the grease on. I used StaLube red high temperature lithium grease 👍

@josea7422

3 жыл бұрын

@@PapaSmurf918Detail awesome , I'm buying a polisher and first thing I'll do is swap the grease as I've been watching everywhere that all need that for less heat and smoother operation. Just wanting to see what grease it's good

@PapaSmurf918Detail

3 жыл бұрын

Absolutely man! Be very careful with the 3 Phillips head screws.. they are very soft and will strip easy. But all in all should take no more than 25 min!

4th! 👍

@PapaSmurf918Detail

4 жыл бұрын

👍👍👍 What's up Keith!

@keithfirebird7618

4 жыл бұрын

@@PapaSmurf918Detail Good info

@PapaSmurf918Detail

4 жыл бұрын

Thanks brother!

Did u watch this video before you posted it? There’s nothing there when we’re supposed to see how the backing plate spun before.

@PapaSmurf918Detail

3 жыл бұрын

Yes, I saw that... I deleted by accident after I edited. I needed room to free space to export an it deleted that one video because it was takin in my phone and not my gopro.. there was 0 free spin at all.

@TheDex302

3 жыл бұрын

PapaSmurf918 lol I hear ya bud! I just picked up the m15 pro set with the 3”. Can I replace grease in 3” polisher?

@PapaSmurf918Detail

3 жыл бұрын

@@TheDex302 which 3 inch polisher did you get?

@TheDex302

3 жыл бұрын

PapaSmurf918 the maxshine 3” da polisher. They sell as a set on amazon.

@PapaSmurf918Detail

3 жыл бұрын

@@TheDex302 oh ok gotcha!! Just looked it up! Yes, you should absolutely be able to swap the grease👍

Nice demo brother please upload carbon brush replace video in maxshine m15 pro

@PapaSmurf918Detail

Ай бұрын

Thank you! Appreciate you taking the time to watch! I will do my best 👍👍

Its just OCD. The extra grease isnt gonna do any good.

@PapaSmurf918Detail

Жыл бұрын

🤷‍♂️ I honestly didn't feel like I put too much lol. Still working and feels smooth. Next time I'll not put as much😅😄

@naumanahmadtariq8717

Жыл бұрын

@@PapaSmurf918Detail lolzz Nevermind. Peace of mind is absolutely necessary. Thinking of that extra grease will release extra dopamine every time you run the machine. Keep polishing.

@PapaSmurf918Detail

Жыл бұрын

@@naumanahmadtariq8717 lol. 👍🤜🤛

You put way too much grease in there...do you overfill the oil and transmission fluid in your car because "more must be better?" You're actually causing it to work harder with all that grease and shortening its life in the process.

@PapaSmurf918Detail

2 жыл бұрын

Haven't had 1 issue... in ANY of my machines soooo. 🤷‍♂️🤷‍♂️ Where is the guide that shows how much is too much ?🤣 I always over full my fluids... cause isn't more always better????

@Fucknuts4u

2 жыл бұрын

​@@PapaSmurf918Detail - I didn't say it wouldn't run, of course it'll still run but you're causing it to not work as it's intended, causing more wear and shortening its life than had you just left it alone. If you knew anything about gears or motors and had any amount of mechanical aptitude, you would already know not to cram it full of grease like that. It's common sense...run through an empty swimming pool, then run through a pool half filled and then run through one filled to your neck. Which one is going to require the most energy to get to the other side? Which one decreases your mobility the most? If you were compelled to change the grease on your polisher because another KZread fool told you to, you should've replaced it with just enough to coat the gears evenly. The amount that was in there from the manufacturer is a general guide of the amount you should use. Crack open the most expensive polishers on the market, you think those are crammed with grease? Wrong again.

@PapaSmurf918Detail

2 жыл бұрын

@@Fucknuts4u Cool. Thanks for the info👍👍 Still... haven't had one kick the bucket.. also, it was NOT that much grease 😄 relax bro.

@Fucknuts4u

2 жыл бұрын

@@PapaSmurf918Detail - Oh don't get me wrong, I'm not only relaxed but I also don't care if you want to shorten the life of your tools and cause them to function incorrectly. What does bother me is people putting videos out and giving others bad information, leading them to destroy their tools too. But yeah, stay ignorant, no problem for me.

@PapaSmurf918Detail

2 жыл бұрын

@@Fucknuts4u that's weird.... none of mine have functioned incorrectly... they run smoother and a tad quieter... 🤔 wonder how long they will last.