Matts Garage: DIY Alloy wheel Refurb
Автокөліктер мен көлік құралдары
Find all the kit you need to refurb your wheels at www.furiousdriving.co.uk
Awesome Furious Driving stickers available now! rdbl.co/2tDXDb5
Curbed Alloys, road rash rims, peeling lacquer all make your car look scruffy but its an easy DIY job to refurb your alloy wheels at home!
Пікірлер: 53
Going to try this in the summer on my 2006 Focus Ghias undamaged but flaky wheels.Looked at lots of videos doing this and your method looks the most straightforward and clear explanation instead of horrible music.Helpful and informative as always.Thanks.
Thanks. Been looking for a DIY guide. Love the card trick 😛
I would have done the same routine EXCEPTi would have arranged all the bricks behind you into a pillar to raise the wheel up to a comfy working height,easier on the back,knees and eyes.
3:24 "It's around this time you wish you'd started with a simpler shape wheel.. with less spokes" Me about to refurb the 20-spoke alloys off my 2009 Focus Titanium: 👁👄👁
@MrShoryuken1
8 ай бұрын
I am literally about to do my 2009 titanium's wheels. How did yours go?
Brilliant, thanks so much!
Fantastic job ! Thank you for this video !! Can you help us with the shopping list for 4 wheels ? Thanks again
Great job and tips there thank you, do you have a shopping list for what you need to do the wheels and where is a good place to buy from, i am on the south coast
Good job.
Fantastic m8
Thank you
Excellent
very nice
Really good video but any product recommendations?
Cool vid. One question though. Aren't alloys usually powder coated. Will standard spray paint chip and wear quickly being so low to the ground?
Hi , What colour primer I should use for silver colour paint?
what brand do you recommend for the playing cards? waddingtons are usually my first choice but I wonder if they have too much flex for the tyre walls.
@furiousdriving
5 жыл бұрын
KEM always, 100% Cellulose Acetate so good flex and dont go soggy
@slizzard173
5 жыл бұрын
@@furiousdriving I'll have to check out the classifieds then. That kind of GSM doesn't come cheap. That explains why professional refurb is so expensive
How much time does it take?
Hello, Any chance you list all the different equipment/tools needed please?
How hard is this?? I acc wanna try this 🥺
wet and dry ??
Brilliant video and technique! I've just followed this almost to the letter but DON'T do what I did and skimp on the prep - the result is all down to the amount of sanding! I did most of the job with 80 then didn't do a lot of the 120, now my wheels look all scratched and I think I'm gonna have to do them again... also got loads of the filler on the outside of the rim, what a ball ache to get off! Thanks for the vid!
@furiousdriving
4 жыл бұрын
Haha paint work is all in the prep, as Ive found the hard way too! Glad it was almost helpful!
@EdMoseleyy
4 жыл бұрын
@@furiousdriving really helpful! Thanks so much 😃
@jordycarr8363
4 жыл бұрын
How much tins of each would I need for all 4 rims? My alloys are more or less in perfect condition, will I only need to use 80 and 120 sand paper? Thinking of doing mine for something to do during this shenanigans haha
Nice work, how long between paint and lacquer for drying
Where did you get your clear coat from. The one I got sprays out rain drops!!
@furiousdriving
2 жыл бұрын
If it wasnt Halfords it was a specialist car paint supplier
@TheFlemburger
2 жыл бұрын
@@furiousdriving ok cheers mate
For 100% results, the paint should be left arround 3-7 days to dry and sit properly. This if you don't have a oven to dry the paint much faster. Only after that, you can apply laque, this will be the only and the best way to do them. Took me arround 1week to completely do them properly.
@drumtum81
3 жыл бұрын
Some people say you should hit it with the clear coat while the paint is still drying.. Not sure which is better
@ahamid234
2 жыл бұрын
Lol 7 days is over kill mate chill out
@NeilD163
2 жыл бұрын
I did four in just under five hours, from sanded down to primered base coated and laquered, mind you i used and electric sander and spray guns to do the job.
The wheels are alloy so etch primer should be used not just any primer
What brand base colour brand do you recommend?
@furiousdriving
4 жыл бұрын
I just used Halfords paint and lacquer, it was fine but Im sure a specialist paint shop would be better
@JEA868
4 жыл бұрын
Hey thanks for getting back to me. Was at halford and they advised it may sometimes chip off after use. Have you had good experience after returning the wheels? Or have you had some chipping
how many hours in total?
@furiousdriving
5 жыл бұрын
with drying time between coats it took all day but theres only a couple of hours actual work. Depends how intricate your wheels are and how fussy you are about the finish
How long does it take per wheel would you say?
@furiousdriving
10 ай бұрын
A couple of hours
Much easier with tyre removed dont you think
Great job but please wear a mask next time
Best to have the tyres removed It not a lot of money
never ever put filler in wheels.....
mate sort your audio out.
Could do without the sanding noise
I would rather pay £200 and get them refurbished
Fuckin hell mate put the mic closer to the sanding why don't you
Jesus Christ lad, I appreciate the video but seriously.. learn audio leveling when you're editing. The second you edited into the first sanding I ruptured my ear drum. Ouch. Ok, rant over! ❤️