The only guy on KZread actually showing how to install, but also not trying to scare you away from doing it yourself. No cut aways or just showing one section. Thanks Chris for your constant expertise and willingness to share your extensive knowledge.

You can use coffee filters to absorb the mosture on the final wipe. They are lint free and cheap

You are the f… Bob Ross of Wraping man!!! 👍👍👍

I find the biggest contributing factor is driving habits .The closer you drive behind people the more impacts occur . And the more a person is impatient they tend to hug your rear bumper . I learned my lesson driving behind a dump truck full of gravel and they didn’t clean off the spill on the bumper . The windshield looked like a spiderweb

Doing PPF reminds me of the days of phone screen protectors that were PTFE and you did “Wet” install method. Funny thing is; even today with the tempered glass screen protectors out there, I miss the old PTFE and Wet install method protectors. Imo, they installed easier, quicker, & loved the self healing on them. But tempered glass is king right now. Thx CK for this demo, brings back memories, & like the new PPF w/ color now that you did; now that was killer👍🏻 Cheers✌🏻

@aceani

Жыл бұрын

TPU screen protectors are ruling the roost again. Tempered glass protectors were all the rage a couple of years back, but not now.

@itzMcRaw

Жыл бұрын

I've been installing them for the last 2+ years here in NB! Both clear & matte options surely enough! Company I work for calls them Smart Shield

Its always fun to see you acknowledge your human mistakes.your pro level wrapp instaler and you still dont hide common mishaps to make yourself sound perfect ,thats pretty cool &viewers need to see these comon bits because i wold def make thos misshaps 100% otherwise

@CKWraps

2 жыл бұрын

Reality versus social media is a huge gap is most situations. I try to keep that gap tightly closed. It's important to me that my viewers understand the reality of things.

This was VERY INFORMATIVE!…thank you!

Love your content. Wish you lived on my island

Hi Christian great video! I’m wondering if there are going to be air pockets or air bubbles on top of bigger stone chips?

On a mid size sedan, what would you say the average cost is to wrap the entire thing in PPF

Super Dope Family!❤️💛💚

Ty for ypur vids mate, they are awsome. One question, bee working with ppf for a year now and i utilise Stek, dont know if you have used it before, but if you have, how does this ppf compares to it? Ty beforehand.

Nice work.😃

Hey bud thanks for the videos, im going to tackle my chrysler 300c crd, never wrapped before. Confident ill do a satisfying job only intimidating sections are the front bumper and potentially rear bumper. Any expirience/advice you have from similar or same car?

Nice vid! .. i thing the matt do more justice on making the white paint job into "snow white" type.. i think i will have the Matt ppf on a white cx9

This video was superb! lots of tips and very good guidelines to follow to do this well, thank you! I have a question though, I have a matt carbon wrap on my hood and roof, is there a way to make it gloss somehow like maybe super glaze or some other coating that I can apply or do I need to PPF my carbon wrap so its glossy?

Thanks!

That PPF looks really easy to work with......or is it just me? For sure one thing i want to learn how to do and for sure if i do i will go to one of your training sessions

Man, can't get enough of your videos but I am demoralized today. I attempted to wrap my silverado hood yesterday with my son's help (vvivid satin black) and it was either too large or tall or too advanced for me to try as I had only practiced on a smaller front end piece. Failed hard and cursed a few thousand times! I still have enough to try again, wondering if I should I just take to someone nearby who is a pro and will they even use my vinyl? thx for the education sir.

Hey mate! Been watching your vids for about a month now.. decided to give it a go... Bought myself KPMF purple/black matte... Problem is.. my 2022 Elantra kicked my ass... I tried a small testing piece and it took me over 2 hours on the hard parts of the trunk.. HOW THE HELL YOU MAKE IT LOOK SO EASY??? guess I will try again tomorrow but if you can give a few pointers on how to tackle this when I try a bigger piece I will appreciate it a lot.. tried to glass it but i have 2 high points on both sides and a high point at the tip above the symbol and between I have a curved low point so.. yeah.. filled with air😅 sorry for the long and messy comment, a little frustrated.. have a great week bud

Love watching your videos. My Model Y will get full front PPF next week and at least I know a bit more about why it costs as much as it does.

@VladOnEarth

Жыл бұрын

I watched the whole video and still dont see where it was justified to charge $1700+ for a FILM? That price is beyond ridiculous. Cost of production is most likely within $100 range for it.

@chrislopez3518

9 ай бұрын

actully sir its 2000 to 2500 to wrap a front and material cost is roughly 450-500 dollers, takes years of experiance....that being said this might not be a product for you..

@eugeniustheodidactus8890

9 ай бұрын

@@chrislopez3518 yep.... mine cost @ $2300 give or take.

@chrislopez3518

9 ай бұрын

@@eugeniustheodidactus8890 good move, howd it come out

@eugeniustheodidactus8890

9 ай бұрын

@@chrislopez3518 Came out great. Now that Tesla has removed the sensors from the bumpers, it's gonna be alot easier to wrap them! Take best care.

What do you guys think is more difficult to install, ppf, vinyl wrap, or window tinting?? Just curious .

Can you add this film on top of a vinyl wrap of the hood? Kind of new at this and was just wondering

i use a heat gun on a low setting to seal and wrap my edges. you can definitely get yourself in a pickle very fast with your much heat for sure. i find installing in a colder shop hot water it my friend to get it to relax. also use my steamer to get the hard valleys down. i agree with no purpose of the cap sheet on ppf a big waste and a lot of plastic. our 3m line we use thankfully they don’t use a cap sheet but some of our 60” wide is capped

Please do a how to on vvivid air release tint on new Silverado tail lights!

Great video. While I love ppf when new, how much of a pain is it to remove when old and even worse past "old"? With that said what is the life of ppf if it's sitting outside all the time in direct sunlight? Thanks.

@ramshid8817

9 ай бұрын

If car is extremelt exposed to sunlight 5 years max , beyond 5 years PPF removal will be a mess and the whole thimg will come off like crakced plastic. I just saw a car with PPF for 7 years removed and it was horrible and labour intensive.

What about the edges and cuts? Is it the same as vinyl? Do you round the edges?

Hi Chris. I am going to embark on my first wrapping attempt on my NC Miata because of all of your fantastic videos. Front bumper, rear spoiler , mirrors and the hood or at least part of it. My question is about the hood and PPF. If I do all the hood, this isn't an issue. If I do a carbon fiber inlay in the center relief area of the hood, similar to the Land Rover you did 4 years ago with knifeless tape but having the front exposed and not wrapped under an edge, can I put PPF over the hood and that carbon fiber section and will it have any issue at those edges around the carbon fiber. It will protect it from water and wind which is my intent. Do I have to worry about water getting in the CF as I apply the PPF? I have not found a video of you putting PPF over an exposed edge of another wrap like carbon fiber yet to know of any pitfalls I might encounter.

My question could be stupid, but I definitely do not know in wich case we have to use water/soap solution in wrapping ? Sometimes people use a spray sometimes not ... ? Someone could explain to me ?

Is the film resistant to bird droppings? can i apply a sticker over ppf ?

Great video. Do you think if a person prepped a hail damaged car (filling dents, sanding, etc) PPF could make car presentable? Maybe not perfect but acceptable daily driver? Thanks.

@arapaimagold8088

Жыл бұрын

You never want to wrap a repainted panel with PPF. The paintwork will lift when you're removing the PPF.

Was wondering if PPF Comes in colors or just in clears

watching your videos I'm gonna TRY attempt wrapping and ppf but was wondering if there's anything you can put on top ppf for extra extra.. thanks ..

@rickyrios8788

2 жыл бұрын

Probably ceramic coat like halo

Not sure to go with gloss black or Satin Black on my engine hood What’s better hiding dust and maybe water spots 🙏✌️🇨🇦

i tried their site last week when I found one of their vids.. the site is not working : (

I need to send you my car for a video😂

Hey Christian, any wrap shops in Los Angeles area you would recommend? Your cuts and trimming techniques have set the bar…now I just can’t believe there’s other shops that have the same work ethic as you…

@williamjimenez9701

Жыл бұрын

Check out GutterLaneWraps. Certified by CK Wraps himself.

Bro. When you peel from a table. I always squeegee the end of the film. And then spray it again. It makes it stick to the wall/table more meaning it doesn’t drag when you pull it 👍😀

Hi CK, You must be able to pull film. Those fingers will spring back later. This is my suggestion for your reference.

where do you buy your Vinyl Wrap

Question: I put down a protective film (3M) on the side of my bikes gas tank. I messed it up and its kind of crooked. Is there a way for me to straighten it? Like, what happens if i heat it up and try pealing it. Would it stick back on it? TIA!

@jerryfullen5043

2 жыл бұрын

I would highly dought it if it’s been on anytime at all

who manufactures your spray bottles?

Is the PPF film resistant to bird droppings?

Hey. Been watching your vids for years. Going to wrap my 65 mustang. Can you point me to a video that shows a closeup of you cutting the edges. You say back of the blade against the car which I'd like to see what you mean.

@coenmeijer8018

2 жыл бұрын

The back of the blade is the side Thats not cutting the vinyl, you slide this part of the blade across the body panel opposite of the one youre working on. This leaves you with enough vinyl to truck in, doesnt damage paint and Provides a clean cut

And also folding it that particular way attracts dust. You should fold them film set side to dry side.

Vicrez, have you seen the display hood wrapped on the website in pink? My lord, for a display you'd think you would want to actually get someone who knows how to wrap

Man show us how to do corners and change of color matte PPF.!!!

Hello I was wondering, can you keep wrapped car outside?

@jrjr5525

2 жыл бұрын

Ofcourse

Could tell straight away he is not a ppf guy hahahhaha

@chrislopez3518

9 ай бұрын

Ways to go

I don't agree with the heat gun thing for PPF. We use it all the time for locking down edges and corners. For sure it's used completely different than in vinyl wrapping but heatgun doesn't necessarily crack TPU versus PVC. For PPF, a heatgun is used to lock down edges and tight corners. For vinyl which you're more of an expert, I think you use heatguns or torches to preheat and also postheat to break memory in the vinyl? Sorry we're not vinyl wrapping experts......

@CKWraps

2 жыл бұрын

I use a heat gun as well on PPF but it's like you said, only for edges and corners to lock it down for a bulk install. What I mean in the video is that using a heat gun to stretch the PPF can cause cracking.

@eddiestsla

2 жыл бұрын

@@CKWraps totally agree. Thanks for your content. We suck at vinyl and your videos helped a lot when learning

I’ve been installing Paint protection for over 15 years. This technique is very rough. Not sure how you can train with this method. It’s not vinyl but you are treating it like it.

@CKWraps

2 жыл бұрын

It's merely an example to show the matte and gloss.

my swift is much more worst than that of stone chips😂

Your work only 20%

Bro why you mek too fish

@thomasvainio7188

2 жыл бұрын

What the hell does "mek too fish" mean?

@ahmedyasir1455

2 жыл бұрын

@@thomasvainio7188 ahaha

Your work not 100%

THIS IS NOT EASY TO DO LOL