Came out better than expected ❤

@Themanchlid

3 ай бұрын

Yeah, he really looks good in hand! I like the design. Thanks for checking out the review as always 👍

I really like your reviews, very exhaustives😊

@Themanchlid

3 ай бұрын

Thanks so much! I try to show as many details as I can but edit to keep them as short as I can 👍

The shield with the flame effect seems to pass as that back ring as well. 😮 Can't wait to get mine. 😊

@Themanchlid

3 ай бұрын

Yeah, you can shield with the fire ring on the back. Originaly I had in the review but cut in editing because of sound issues. It doesn't really do much on his back like the 200x or Origins Sy-klone rings do.

Leech and Skeletor are just waaay too small...Villains should be intimating. Sy-Klone looks really good. They went hard on this release the box art even is above par. He looks like a spooky Djinn almost and I'm here for it.

@Themanchlid

3 ай бұрын

Yeah Leech is definitely on the smaller side going back to the animation series. But he seems even shorter in the head or something. Aside from that, his design and details are really cool. I really like this Sy-klone design for Masterverse. The spooky Djinn you mentioned is a good comparison to this figure. The art and teases on the box definitely stand out for this figure👍 Thanks for checking out the review!

Just opened mine and I'm stunned at the beauty of it. The best look is with the energy effects on the shield, on his back, replicating the ring.

@Themanchlid

14 күн бұрын

@cropdustcaptain3059 I'm glad to hear you just opened your Sy-klone figure and really appreciate the overall design! I think he looks great for the New Eternia series. That energy shield with the fire effects is a really great addition now. It looks so cool on his arm or back. I filmed the scenes where the energy effects go on his back like the ring, but it was cut in editing for technical reasons. I showed that update in my New Eternia Thunder Punch He-man review. Thanks for watching and sharing your thoughts on this figure 👍

@cropdustcaptain3059

13 күн бұрын

@@Themanchlid I'm contemplating getting a 2nd one just for the extra accessory pieces lol.

@Themanchlid

13 күн бұрын

@cropdustcaptain3059 There is a seller on eBay 3d printing the Classic Ring that snaps on the back. I picked up one recently. It looks really cool!👍

@cropdustcaptain3059

11 күн бұрын

@@Themanchlid thanks for letting me know, I'll check it out!!

@Themanchlid

11 күн бұрын

@cropdustcaptain3059 Yeah, no problem! Here's the link. www.ebay.com/itm/176414441514?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fYggPMwgQGq&sssrc=4429486&ssuid=QsCteTpTQgm&var=&widget_ver=artemis&media=COPY

Dude, 3 videos in 3 days, you're gonna wear your self out.

@Themanchlid

3 ай бұрын

Lol. Yeah, I'm already worn out laying in bed on a heating pad now! Thanks for stopping in already. I appreciate the thoughts 👍

This new Sy klone looks great. Definitely need this one in the collection. I'm crossing fingers we get Rio Blast soon. Would love to see both Origins and Masterverse versions. Give the Cowboy Gunner some time to shine. Juicy review 🍕🍕🍕🍕🍕 5 slices of Pizza.

@Themanchlid

3 ай бұрын

Thanks for also taking the time to check out this Sy-klone review, bro! I think this Sy-klone figure is my favorite in all of wave 13. His colors and design look awesome! Oh man! I so want a Rio Blast figure in the Origins and Masterverse series. I can definitely see those coming to both lines at some point. They are really demanded by fans 👌

I think he looks awesome! Can't wait to get him!

@Themanchlid

3 ай бұрын

He definitely has a great design for Masterverse! Thanks for watching and sharing your thoughts 👍

I have the Heads Of Eternia set. I'm getting an extra Sy-Klone for the Classics head. 22:17 That looks awesome!!! I can't wait! I have the neck-ball adapters I made so I can easily make any head fit on any figure. I made a video about them but I may need to make a new video showing how to make them in more detail. They are easy to make with silicone mold rubber & a soft/flexible resin.

@Themanchlid

3 ай бұрын

That's awesome you have the head pack! I used or at least tried those heads on all the Relating Masterverse figures. They are a bit stiff but still look great on the figures. That adapter piece sounds interesting 🤔

Wow! Sy-Klone again! Mattel gave us both of them real close together! Love them!!!

@Themanchlid

3 ай бұрын

Yeah I didn't expect a Sy-klone to come this quick to Masterverse after the Origins one dropped either. It's awesome we have two versions of this figure now in both lines! Thanks for watching and sharing your thoughts 👍

Hey Man. Greetings from Perú. Always watch your reviews. Just today i got my New Eternia Mecaneck

@Themanchlid

Ай бұрын

Hey, Thanks for always taking the time to watch my reviews! Greetings from the USA, man! Congrats on getting that New Eternia Mekaneck in hand! I think he has an awesome design for the Masterverse series 👍

Great review! He’s a pretty good figure, a departure from what we’re used to but I appreciate Mattel giving us something different here. Not a must have right now but will definitely pick up later sometime.

@Themanchlid

3 ай бұрын

Thanks for watching already! Yeah, it's a really good design for New Eternia. But a little different as you mentio9ned. I don't mind it with this Sy-klone. It's cool seeing some new ideas , but they are still mixed with the original concepts.👌

Love Syklone! Thanks for the Video my friend!

@Themanchlid

3 ай бұрын

Thanks for watching, my friend! Sy-klone is by far one of my favorite Motu figures since the vintage line as a kid👍

@derbaumdersterbendenzeit

3 ай бұрын

One of mine too 😎

@Themanchlid

3 ай бұрын

@@derbaumdersterbendenzeit 👌

That clear chest piece is awesome!!❤

@Themanchlid

3 ай бұрын

Yeah, that lens is a really cool look over the radar for this Mer-Man Sy-klone! Thanks for watching as always 👌

Sy-Klone is one of my favorites. I just got 2 from Origins & pre-ordered the Masterverse version immediately.

@Themanchlid

3 ай бұрын

Yeah, I absolutely love the Sy-klone character! I thought the Vintage, Classics, 200x ,Origins, and now this Masterverse Sy-klone figure are all great designs in their own way! This New Eternia version has a really cool design that's different yet original! I am happy to hear you like the design and Preordered 2! Thanks for stopping in already to check out the review 👍

This version of Sy-Klone is okay, certainly not terrible. I think it’s the face sculpt that brings it down a notch for me. You pointed it out perfectly, sort of has a more anime-style to it that I’m not really a fan of. I’m also a bit indifferent on the Storm Trooper-style mask. That 200X-inspired Classics head, however, looks really good on this figure! Everything else looks really good though, I like the energy effects on the arms. I agree that it should have included the ring like the Origins figure did, or at the very least made it possible to use that accessory on the Masterverse figure. The crack on his chest window is something that would really annoy me personally, I hate stuff like that, so that’s a shame. ~Damon

@Themanchlid

2 ай бұрын

Thanks for catching up on this video review of Sy-klone! Yeah, he definitely has a unique design that is different from the Classics or Origins Sy-klone. I kind of like what they did for this figure in Masterverse personally. I will always prefer the Classics and Origins version first. The cracks on the Rader suck. I have another figure in the package, and his chest Rader is fine! I wish they added that space ring like the Origins Sy-klone has. You can use the fire effects on the shield on his back to give him that inspired look. I cut that in editing. I show that correction in my New Eternia Thunder Punch He-man Review. Thanks for watching as always and sharing your thoughts, Damon 👌

Yo Man Child I gave you a shout out at the end of my interview with He-Bro for a video he is working on! Cool you got another favorite character of yours to talk about... Sy-Klone!

@Themanchlid

3 ай бұрын

Thanks for watching! I appreciate the shout-out! That's really awesome! I like He-Bro. He's a nice guy and has some interesting content with MOTU. I haven't been to his channel in a while because of time and working on my own reviews, which takes so much time with filming and editing! But it's cool sharing content and shout-outs. I also do it from time to time with other channels and creators. I mentioned He-bro in the past in a couple of my reviews as a shout out👍

Been waiting all day man.. 😍 Yeah he turned out great. Just wish he came with more effects. I actually really dig the face mask. Most of these new Eternia Figures are trying to make them look like the designs from the Power and Honor book. ( early concept) Wish it looked a little more like the sketch . Still an Instant purchase for me.

@Themanchlid

3 ай бұрын

Thanks, I always appreciate your enthusiasm and support, man! I'm glad that you do like the overall design of this Sy-klone, but you mentioned those other details that would have made him more interesting. I also wish certain accessories or other original design features were added to some of these New Eternia figures sometimes. Depending on the character. But im used to the changes and different directions they go to sometimes with this line. I guess nothing will beat the Origins and certainly the Classics with true vintage inspired designs. But I like what this series is trying with most figures. In hand, this Sy-klone looks really good 👍

In my opinion: the body sculpt, the colors and the armor is great but I really don’t like the face sculpt at all. The 2000X head that you swapped looked way better. Thanks for the review

@Themanchlid

3 ай бұрын

Thanks for watching as always! Yeah I think thier is certain details or heads on many of these Masterverse figures that are hit or miss for many people. I liked the overall design and head sculpt personnally for this New Eternia Sy-klone. It's different but yet iconic to his original design. That 200x head does look really good like many of the Classics heads do on certain Masterverse figures 👌

God Figure my friend great Video

@Themanchlid

3 ай бұрын

Thanks for watching, friend. I'm glad you liked the video and figure!👌💯

23:46 Boiling water & a flathead screwdriver. Lift the edges of the helmet just enough to fit the pegs in. Shouldn't do any damage. It might only release a tiny bit of the glue holding the helmet to the face. But that won't be a problem.

@Themanchlid

3 ай бұрын

Yeah, thanks for the info. I have pulled apart things like this before with hot water and a pry tool. I just mentioned that it is pegged and glued on and would need custom work to remove it. But I don't make suggestions because I don't want people damaging the figure if they are not confident in custom work.

A first-rate review of Sy-Klone and his awesome accessories!

@Themanchlid

3 ай бұрын

I'm glad you like the new look and accessories for this Sy-klone figure! awesome timing to stop in! Thanks as always 👍💯

@aaronscott5882

3 ай бұрын

@@Themanchlid Phenomenal work! 👍

@Themanchlid

3 ай бұрын

@@aaronscott5882 👌💯

@aaronscott5882

3 ай бұрын

@@Themanchlid 🤗

Looking forward to this one! You might cover this (I'm only a little over halfway thru the video), but it seems like if you plug the energy effects into the shield & then plug the shield into his back, you basically get the red ring effect they included in the Origins & 200X design. I know some people wanted that red ring included with this one, so it's a nice way to achieve that effect with the Masterverse.

@Themanchlid

3 ай бұрын

Thanks for watching and sharing your comments! Yeah I actually I filmed that ring with the effects on the back. I cut that part in editing because of sound issues. I didn't re film the scene and just skipped that extra detail. But I did bring Sy-klone in again for a comparison in my New Thunder Punch He-man review and I explained that part about the shield I left out of this review and why as a response to a couple other people in the comments that also mentioned the setup with those effects. I'm glad you also like the overall design with this Sy-klone figure 👍

@ioncewasmikey

3 ай бұрын

@@Themanchlid oh cool, I'm watching your Thunder Punch review now haha

@Themanchlid

3 ай бұрын

@@ioncewasmikey Nice! I appreciate you also checking out that review now as we well! I'm working on the Wave 13 Hordak review now.👍

@ioncewasmikey

3 ай бұрын

@Themanchlid very cool! I don't collect the Netflix stuff but I am a big Hordak fan & that figure looks nice, so I'll definitely be watching your review when it's ready!

@Themanchlid

3 ай бұрын

@@ioncewasmikey Yeah I have read many comments about not liking the Revalation cartoon figures because of the Netflix cartoon. But they do like the New Eternia or the Revolution cartoon and figures. I'll try to get hordak up in a couple days👌

Another great review, I like this, But may not get it, Too many things I want right now, but I think this is the best version of the character so far, part of why I am tempted to grab the pre-order, But gonna go with one of the others first, after buying New Eternia TriKlops from a local store next week, after that ? Possible MV Leech. being a bit smaller doesn't bother me, it's great.

@Themanchlid

3 ай бұрын

Thanks for stopping in as always and I appreciate hearing your thoughts on this figure. Yeah there's so many MOTU figures out on the market and only so much space or money we have to make choices with what figures are most important to get first for our collections! I do like the design a lot for this Masterverse Sy-klone figure. Leech also looks great even though he is smaller. The drop legs I discovered later dose make him a bit taller 👌

Hay hay man brother,this is a cool wave ,ill tell you the last few waves was really nice,and the firefighter elephant dude is really good ,but this wave is something to get happy about

@Themanchlid

3 ай бұрын

Hey, my brother! Thanks for dropping in again! I'm really like this wave of Masterverse so far. I reviewed Leech and now Sy-klone. They are very unique but yet feel like old-school Motu character designs. That Masterverse Snout Spout is by far the coolest figure from Mattel Creations this year as far as New Eternia goes!👍

@dzsquad1965

3 ай бұрын

@Themanchlid a few videos I saw they are said they had problems with spout ,I do6no that's just there worse or is it a problem, what do u think, and do u have this whole wave and setting up for the toutubes

@Themanchlid

3 ай бұрын

@dzsquad1965 I don't have any problem with Snout Spout! Mine is perfect.. I reviewed him. I don't remember mentioning too many issues. Yes, I have all four figures with wave 13. My next figure review will be New Eternia Thunder Punch He-man. I'll start working on that review tomorrow and hopefully have it up in a couple of days, bro👌

Yeah...that is the Fright Fighter. I love that toy!

@Themanchlid

3 ай бұрын

Yeah I thought that's what it was called I had that as kid along with every vehicle in that vintage MOTU collection. Cool stuff in the day!👌

Pretty cool figure. I really like the facial details vc and the mask. The fire effects are so dope, the way you can put them on the shield or the wrists. Fuckin sucks that yours came a little cracked. The classics head looked awesome on it!! At first, when I first saw him being announced, there was something off about him. He was a little scrawny. But after this review, it just fits. I like how they’re all different scales, masterverse is. Still prefer the origins one, though lol.

@Themanchlid

3 ай бұрын

Thanks for stopping by as always bro! The face design is definitely unique and fits this Masterverse Sy-klone well. The first effects and shield are awesome! You can always put that setup on his back to look something like the planet ring the origins figure has. I filmed that but cut it in editing because of issues with sound. It looks cool but dosent do anything like the Origins one dose. That's why I tried to adapt that origins backpack on the Masterverse Sy-klone back. The lens radar is a decent size for this figure our of box. Yeah I heard someone else had the lens crack issue as well on thier figure. I actually have another have another Masterverse Sy-klone in card and the Lens is fine! I also will always love that Origins Sy-klone first 👌

How do you get these so quick. Mine are still on pre order!!! Great review. Keep up the awesome work.

@Themanchlid

3 ай бұрын

Thanks for watching as always! Myself and other content creators usually get this stuff on eBay for a higher cost from sellers and toys buyers that get a few cases ahead of the distribution time from the factory and fly it into the USA. Most of the stuff travels by ship, which takes over a month and then sits in the warehouse before trucking distribution starts to retail.

@spideymax1222

3 ай бұрын

Thank you so much for the info. I love your channel and the great job you do on reviews. I like the way you mix and match figure. Cuz I’m alway thinking would this piece work with that figure and then you always do it in tour videos.

@Themanchlid

3 ай бұрын

@spideymax1222 No problem! I really appreciate your views and interests in my content! Yeah, the mixing and matching parts of the video take the most time and editing to do. I try to show what can or have available with certain parts or figures that make the most sense to try. I can't get everything. I also try to keep the videos as short as I can and still make it a review on that figure and not an hour hangout changing parts. It gets complex trying to balance that in a figure review. But I also appreciate hearing your feedback on that!👌

As a 200X fan, I do agree it's a shame he didn't come with the same ring his Classics and Origins version has. That said, I do feel the shield with the effect pieces SORT of simulate how the ring looks.

@Themanchlid

3 ай бұрын

Thanks for checking out the review! Yeah, that 200x ring would have been really cool on this figure! The fire effects can also plug into the shield and go on the back to somewhere mimic that ring, as you mentioned. I cut that part in editing because of a problem. I showed that update in my Masterverse Hordak review toward the end!

Awesome. TY!

@Themanchlid

3 ай бұрын

Thank you for watching!👍

Awesome review, can't wait till July when mine finally show up 😅 bht i do have a question. Where do you get that green castle like background from because I've look all over the net?

@Themanchlid

3 ай бұрын

Thanks for watching the review! Yeah, most preorders on these figures ship around July or so unless you go on eBay now and pay double the cost for one! That background is called Dungeon Pop-up Diorama set for 1/12 action figures. I got mine from Amazon. Sometimes, they are in stock. You can also check eBay.

@chaotic3158

3 ай бұрын

@@Themanchlid awesome man, thanks for the info

@Themanchlid

3 ай бұрын

@chaotic3158 You're welcome, man!👍

I also sold off my 200x collection but kept SyKlone and Roboto.

@Themanchlid

3 ай бұрын

Thanks for watching and sharing that info and your 200x figures. Yeah, I still have Sy-klone, Mossman, Faker, and a few others from that 200x line. Once I collected the Classics, they went aside the few I mentioned. Now, with all the Origins and Masterverse in my collection on top of all the Classics. I have very little interest in that 200x line of figures.

@TaylorTrask

3 ай бұрын

@@Themanchlid Also, thanks for testing the classics 200x head! That was my top question.

@Themanchlid

3 ай бұрын

@TaylorTrask No problem! I honestly wasn't even gonna bother with the Classics head, being that most people don't have those in their collection and might like how it looks on this Masterverse Sy-klone, which is really good! But I'm glad i tried it, and it helped answer your question 👍

@orlandovaninibenvenuto3106

Ай бұрын

Me too. I kept several including Roboto Syklone Trap Jaw and Fisto

Def looks better out of the package and better than the promo pics.

@Themanchlid

3 ай бұрын

Yeah, I noticed most of these figures are looking much better out of box than the images for some reason! Thanks for watching and sharing your thoughts 👌

I am curious if the rings from the origins sy-klone can be put under the shield on the back of the masterverse one i really like the neo samurai look from 200x and want to see it on the masterverse one more than the origins version. As always love the part swaps it's always good to get a heads up and i always point to your videos when friends online have questions about figure specifics.

@Themanchlid

3 ай бұрын

Thanks for watching as always! Yeah, I couldn't get the Ring off the 200x figure. It articulates, and I tried pulling it off before i filmed. But it wasn't coming off, and I didn't want to break it. I have a feeling it won't work anyway without some kind of custom setup.

Ah, man, that's the second review I saw with a cracked bubble! You can plug the fire effects into the shield and then plug it into his back to recreate the 200x ring, but I'm surprised he didn't come with any blue wind effects!

@Themanchlid

3 ай бұрын

Yeah, I talked to someone else on Instagram who also had a cracked bubble. I have a second Masterverse Sy-klone in box, and the bubble lens is fine! I originally had that shield with the fire effects filmed on his back. But I cut that in editing because of an issue. Thanks for stopping in as always. I appreciate the extra info👍

Hopefully new eternia roboto is next with his 3 interchangeable arm parts!

@Themanchlid

3 ай бұрын

I can definitely see a new Eternia Roboto coming at some point. I think the next two New Eternia figures to come are Mer-Man and Battle Armor Skeletor. Thanks for watching ✌️

I think Leech is shorter because of his feet, they look pretty flat and because he has no neck. Thanks for the Sy-Klone review!

@Themanchlid

3 ай бұрын

Thanks for watching as always! I think these Masterverse Leech feet are actually taller than the flat Suction Cup style on the Classics and Origins Leech. Those Drop Hip joints do raise him up a bit higher. But he still has a really small design and short neck, as you mentioned. Sy-klone does look really cool, and he is really tall👍

New eternia is rlly good its like retro but modern retro figures its sick

@Runtzinmybluntz6

10 күн бұрын

Or maybe Im just to tired lol it's 4, am great review as always

@Themanchlid

10 күн бұрын

@Runtzinmybluntz6 Thanks for checking out this review! I totally agree! These New Eternia figures remind me of a mix between the retro 200x, The Classics, and their own thing with modernized articulation and design.👍

Man, I was sure you will get it as you were looking at it but then you moved on so I was yelling at the screen the entire time you were talking and toying with that red back piece from the Origins figure! 🤣 You should of tried plugging the shield to his back and then plug the flame effects into the shield so the longer ends are pointed up. I think Mattel added this to emulate that red circle piece, without making that giant red circle piece... 😂 Other than that, great review as always, I can't wait to get this guy. 🙂

@Themanchlid

3 ай бұрын

Thanks for watching as always! Yeah that's funny about the shield on the back with the effects. I actually filmed and showed that originaly. But it was cut in editing because of sound issues. I'm working on my NA Thunder Punch He-man review now. I bring Sy-klone in later as a series 13 comparsion and I mention that cut I made from my Sy-klone review with the shield setup. I'm glad you like the figure and reviews as always 👌

@hegga_nm

3 ай бұрын

@@Themanchlid I knew you couldn't''t miss something that obvious! 😃

@Themanchlid

3 ай бұрын

@@hegga_nm No I try to cover everything! I film things in parts then edit the cuts together. It takes hours of setup, film, edit, parts swapping and re shooting to put my reviews together. A 20 plus minute review takes over 6 to 8 hours to put together. That shield on the back with the effects I showed was a last cut shot in my filming that I was gonna cut in order later. But as I mentioned there was a sound pop as I was talking about the effects on the shield paying homage to that Origins space ring I was trying to fit. I just cut it editing and didn't feel it was overly important because it dosent do much but sit there and dosent even show it on the box .I'll mention that in my Thunder Punch He-man review!

Nice. 🍻

@Themanchlid

3 ай бұрын

👍💯

I bought one of those 200x classics heads for my origins syklone

@Themanchlid

3 ай бұрын

That's awesome! Yeah, that 200x Classics heads works well on both figures. I only showed it on the Masterverse because that was the main figure I was focusing on with parts swapping and bringing the Origins in to mix parts with. Those Classics heads work well on many figures with Origins and Masterverse. Thanks for watching and sharing that info with your collection 👍

I do want this figure i just got my thunder punch he-man today

@Themanchlid

3 ай бұрын

He really really ls cool looking. Congrats on getting your Thunder Punch He-man!! I'm gonna start reviewing mine today. Thanks for watching as always and sharing your comments 👍

When did they start putting those drop-down leg attachments? 😮

@Themanchlid

3 ай бұрын

I think the New Eternia Trap-jaw had them first from what I noticed. Maybe a couple of other figures before him. Thanks for stopping by 👍

With his mask on you can Army build this guy

@Themanchlid

3 ай бұрын

Oh yeah! The box art shows some other kinds of people flying around that look to be part of Sy-klones faction or soldiers. So that mask can turn him into one of those characters! Thanks for watching ✌️

Needed an alternate head

@Themanchlid

3 ай бұрын

Thanks for watching! Yeah, I wish every Masterverse figure came with a second head. I like this design personally. There will be custom heads online later down the road 👍

In my review I point out the same thing about the cracks except mine are on the bottom

@Themanchlid

3 ай бұрын

Hey, thanks for stopping in to check out my review! That's interesting! I was probably working on this review the same time you were. Yeah I'm not liking the cracks. I thought maybe it was just mine. But you also have them at the bottom! I hope it's just these early figures.

@VexNToys

3 ай бұрын

@@Themanchlid I may try to remove it and dip it in some floor polish to see if I can seal those cracks.

@Themanchlid

3 ай бұрын

@VexNToys Yeah, I would be careful! I'm not sure how far those cracks go. I just got in another Masterverse Sy-klone in card. He doesn't have any cracks 👍

@VexNToys

3 ай бұрын

@@Themanchlid Well, I wanted to see if I could make the color stand out more like the figure on the box anyway. So I’ll take my chances haha

@Themanchlid

3 ай бұрын

@VexNToys Hey, nothing wrong with a little custom work if you're up for it. You can't imagine the stuff I pulled apart for repairs and customs with a new figure out of the box.

Oh, those chins lines just make me think "nutcracker". Not what I would've done.

@Themanchlid

3 ай бұрын

Lol. I see them lines as some kind of cybernetic laser cuts. Now I got the nut craker guy in mind looking at Syklone. Lol. Thanks for watching ✌️

Good figure but i don't like too much helmet and accessories. Even the radar is nothing special. I expected something more from this figure. Probably in hand it s better than in pics or video.

@Themanchlid

3 ай бұрын

Thanks for watching and sharing your thoughts! It's definitely a little different design than we are used to. But it's also mixed with many original concepts from Classics and 200x. But modified! He does look cool in hand👌

@ciuffoarancione8929

3 ай бұрын

​@@Themanchlidi like the colours! I ll buy it as soon as possible. Here in italy we don't have yet snout spout... I hope it will arrive because i like it!

@Themanchlid

3 ай бұрын

@@ciuffoarancione8929 The colors really stand out on this figure. I'm sure Italy will take a while to see these figures.

I am the first finally

@Themanchlid

3 ай бұрын

Awesome! Thanks for stopping in already and sharing the first comment 👌

@M_of_the_U

3 ай бұрын

@@Themanchlid I always come as soon as I get the notification I want to be first every time brother

@Themanchlid

3 ай бұрын

@M_of_the_U Thanks again, brother! It's always great to have you drop in 👍

@jadeilsonribeiro2653

3 ай бұрын

Figura fantástica, parabéns pelo review. 👏🏽👏🏽👏🏽👏🏽👏🏽 Onde você conseguiu?

@Themanchlid

3 ай бұрын

@@jadeilsonribeiro2653 👍💯

LOVELY...another MATTHELL toy that will never show up outside of the US of eh ..

@Themanchlid

3 ай бұрын

Yeah they barley show up at retail in the USA. I only find them on ebay or other online stores like BBTS and such places.

Its disapointing that he only have that shield and still no samurai weapons

@Themanchlid

3 ай бұрын

He never did have any samurai weapons since the vintage or classics. So it makes sense not to include those.

@nikoszparaszkevopulosz5522

2 ай бұрын

@@Themanchlid yes butt many characters dont used the toy weapons on mini comics or hade weapons that showed both in mini comics and lady bug books only

@Themanchlid

2 ай бұрын

@@nikoszparaszkevopulosz5522 That's correct about seeing certain figures in past mini comics using weapons that the figures never came with. I'm just use too the vintage or Classics figures and what they came with as far as Weapons and accessories.

@nikoszparaszkevopulosz5522

2 ай бұрын

​@@Themanchlidmy son loved the 80's motu toys i watched with him the cartoon and read the comics and books they was very rare and hard too get them back then in my country butt i buyed him the he-man in battle armor orko man-e-faces clamp champ man-at-arms ram man godess skeletor with the dragon whiplash mer-man evil-lyn king hiss leetch hordak who shoots thouse yellow blades

Im glad he doesn't have action features. My god damn nephew destroyed the older sy klone which had the action.

@Themanchlid

3 ай бұрын

Thanks for watching! Wow, those older vintage figures took a beating with the action features. Sy-klone was built well! He must have really played with that figure 👍