Nice boat! You may want to consider getting some oar locks and a pair of rowing oars. Enjoy and take care.
@ZachTheFisherman Жыл бұрын
Nice set up I’ve been thinking of getting one! I do have a question though! Can you move the middle seat around
@omieyouknowme3 жыл бұрын
Looks like a Very nice setup for your area, that motor 9/15/20 all the same if u want in future swap out the mitsubishi ECU and it becomes a 20hp. 20" transom good choice
@joshhead9368 Жыл бұрын
Hey man thanks for the review. Im Looking at buying the same boat right now and this really helped me. Cheers
@mdberry12
3 ай бұрын
So, did you buy it? What do you think of it now?
@joshhead9368
3 ай бұрын
@mdberry12 no I ended up getting a used 12ft jon boat instead.
@justin2955 Жыл бұрын
Beautiful boat. I like your video. Couple questions for ya does the boat get hot not being painted? Also what do I have to do to get my wife to buy me this boat? 😊thanks
@c.w.37503 жыл бұрын
It’s an awesome boat!
@storypunman2 жыл бұрын
I don't know about that transom saver, looks like you need a smaller shorter one to keep the engine lower down. That saver seems more suited for a bass boat where the trailer is far under the back of the boat.
@dominikengl32403 жыл бұрын
I recently bought marlon 14, yamaha 15 on it , took it out on the Peace River , worked great
@twsd
Жыл бұрын
Have you been able to clock top speed with your 15?
@dominikengl3240
Жыл бұрын
@@twsd it does around 42-45km per hour down river and about 27-35 km per hour up river with 2 people and some gear
@marlonme70203 жыл бұрын
Darryl this sounds like the exact thing that I want to eventually do. Not this year. But maybe over the winter.
@darrylb4048
2 жыл бұрын
Ive got mine pretty much all done. Im installing the transducer today on a HDPE board. Ive had it our on the ocean and lakes, not bad at all.
@eddygoodwin7089 Жыл бұрын
I’ve been looking at this exact setup, mind if I ask how much it was?
@darrylb40483 жыл бұрын
Good info video. I just bought the MV16 and am kitting it out with downriggers, floor, centre consul, nav lights etc. I have a 30 HP Mercury going on it this Thursday, so I will be on the water soon. Darryl Vancouver Island, BC
@corysturgis6660
Жыл бұрын
How do you like it so far. Im looking at the SWV 16L-16'. Was wondering if 30hp is too fast to troll. Jave you had multiple people in it? Thank you
@darrylb4048
Жыл бұрын
@@corysturgis6660 I have a 30 hp on mine with no issues and you can troll for days per tank. 30 is the max.
@corysturgis6660
Жыл бұрын
@@darrylb4048 have you had extra people in your boat? Im wondering how tippy it is? I have a 5 year old that will be jumping around a bit. I have a 13.5 jon but want something more stable. Ty. I wasnt alerted of your reply for some reason.
@corysturgis6660
Жыл бұрын
@@darrylb4048 my buddy has a 16ft grizzly with a 40hp and its a bit to fast for trolling when the water is still warmer from winter.
@corysturgis6660
Жыл бұрын
Did ypu get your riggers on? What style did you go wuth. This is the exact set up i want but need boat to be stable for unpredictable children. Ty for replies
@matthewpasquale49442 жыл бұрын
If you don’t mind me asking what was the price on the boat itself?
@derekclarke38423 жыл бұрын
I have just bought a v12 can you share how you put your seat on
@peoplemeater11 ай бұрын
How are you still liking the boat?
@twsd Жыл бұрын
Have you been able to clock top speed with the 15?
@NervousNick8 ай бұрын
What lake is that?
@JonathanCall-st4qq6 ай бұрын
How did you make the seat set up?
@FYMM693 ай бұрын
Nice looking hill but with them being so lightweight how do they handle brother water because my experience tells me they’d pound hard and sound hollow
@marlonme7020
3 ай бұрын
This is a beast of a boat. In a lot heavier than any Lund I have used. All welded and no rivets makes this heavier than what it looks. It plows through the waves
@largemammaloutdoors45032 жыл бұрын
Just curious, what are those guide posts mounted too?
@marlonme7020
2 жыл бұрын
Just posted better view of guide mounting
@hltsolo2 жыл бұрын
that flat bottom concerns me. it'll lean to one side with your weight.
@geckokid1019
Жыл бұрын
It’s not flat tough it’s a deep v
@FYMM693 ай бұрын
How are these hulls priced. More interested in the 16’
@marlonme7020
3 ай бұрын
I paid 4000 in march 2021 but they went up a lot after that due to the price of aluminum
Пікірлер: 53
Nice boat! You may want to consider getting some oar locks and a pair of rowing oars. Enjoy and take care.
Nice set up I’ve been thinking of getting one! I do have a question though! Can you move the middle seat around
Looks like a Very nice setup for your area, that motor 9/15/20 all the same if u want in future swap out the mitsubishi ECU and it becomes a 20hp. 20" transom good choice
Hey man thanks for the review. Im Looking at buying the same boat right now and this really helped me. Cheers
@mdberry12
3 ай бұрын
So, did you buy it? What do you think of it now?
@joshhead9368
3 ай бұрын
@mdberry12 no I ended up getting a used 12ft jon boat instead.
Beautiful boat. I like your video. Couple questions for ya does the boat get hot not being painted? Also what do I have to do to get my wife to buy me this boat? 😊thanks
It’s an awesome boat!
I don't know about that transom saver, looks like you need a smaller shorter one to keep the engine lower down. That saver seems more suited for a bass boat where the trailer is far under the back of the boat.
I recently bought marlon 14, yamaha 15 on it , took it out on the Peace River , worked great
@twsd
Жыл бұрын
Have you been able to clock top speed with your 15?
@dominikengl3240
Жыл бұрын
@@twsd it does around 42-45km per hour down river and about 27-35 km per hour up river with 2 people and some gear
Darryl this sounds like the exact thing that I want to eventually do. Not this year. But maybe over the winter.
@darrylb4048
2 жыл бұрын
Ive got mine pretty much all done. Im installing the transducer today on a HDPE board. Ive had it our on the ocean and lakes, not bad at all.
I’ve been looking at this exact setup, mind if I ask how much it was?
Good info video. I just bought the MV16 and am kitting it out with downriggers, floor, centre consul, nav lights etc. I have a 30 HP Mercury going on it this Thursday, so I will be on the water soon. Darryl Vancouver Island, BC
@corysturgis6660
Жыл бұрын
How do you like it so far. Im looking at the SWV 16L-16'. Was wondering if 30hp is too fast to troll. Jave you had multiple people in it? Thank you
@darrylb4048
Жыл бұрын
@@corysturgis6660 I have a 30 hp on mine with no issues and you can troll for days per tank. 30 is the max.
@corysturgis6660
Жыл бұрын
@@darrylb4048 have you had extra people in your boat? Im wondering how tippy it is? I have a 5 year old that will be jumping around a bit. I have a 13.5 jon but want something more stable. Ty. I wasnt alerted of your reply for some reason.
@corysturgis6660
Жыл бұрын
@@darrylb4048 my buddy has a 16ft grizzly with a 40hp and its a bit to fast for trolling when the water is still warmer from winter.
@corysturgis6660
Жыл бұрын
Did ypu get your riggers on? What style did you go wuth. This is the exact set up i want but need boat to be stable for unpredictable children. Ty for replies
If you don’t mind me asking what was the price on the boat itself?
I have just bought a v12 can you share how you put your seat on
How are you still liking the boat?
Have you been able to clock top speed with the 15?
What lake is that?
How did you make the seat set up?
Nice looking hill but with them being so lightweight how do they handle brother water because my experience tells me they’d pound hard and sound hollow
@marlonme7020
3 ай бұрын
This is a beast of a boat. In a lot heavier than any Lund I have used. All welded and no rivets makes this heavier than what it looks. It plows through the waves
Just curious, what are those guide posts mounted too?
@marlonme7020
2 жыл бұрын
Just posted better view of guide mounting
that flat bottom concerns me. it'll lean to one side with your weight.
@geckokid1019
Жыл бұрын
It’s not flat tough it’s a deep v
How are these hulls priced. More interested in the 16’
@marlonme7020
3 ай бұрын
I paid 4000 in march 2021 but they went up a lot after that due to the price of aluminum
@michaelfarrow6718
8 күн бұрын
Price is $4200 for the v12