You should really keep making videos! Finally someone did a vid with the same saw I have! Yeah, now I feel much more confident to make my own zero clearance plate. Thank you!

@abboudworkshop9404

8 ай бұрын

Thank you! I hope to make more in a couple of months

Thank you for the video, it's great you show the mistakes so we can learn better with you!

Fantastic! Not only do I now know how to make my zero clearance throat plate, but I'm also happy to see someone using the same router table I use!

@abboudworkshop9404

3 жыл бұрын

Glad it was helpful!

@TheBikersurgeon

2 жыл бұрын

I love my Kobalt router table too! tossed my Bosch one in the junk pile.

@MYT1FL

2 жыл бұрын

@@TheBikersurgeon you must be joking

Just an idea to help cut your slot for the blade to through... Cut material almost to size. Stick it to insert with double sided table, replace insert with material attached and raise blade to cut slot. Route edges with guided profile bit, seperate material from factory insert, cut underside notches and now it will fit clearing the blade allowing a full height cut to be raised through it. As for the slit for the RK just use a jigsaw with a straight edge as it doesn't need to be zero clearance.

An instructive film. You could still show what a cut with a factory insert looks like and how with the one with zero clearance made by you in the video. Greetings from Poland Adam

Thanks for sharing. And don’t worry about the “mistakes”, I learned from it too! Appreciate it!!!

@abboudworkshop9404

2 жыл бұрын

Thank you

I like your attention to safety (with you camera person’s help)

@abboudworkshop9404

3 жыл бұрын

Camera people are the best :)

Thank you for posting. There is a seller on Etsy making zero clearance inserts for this saw. In Germany so $25 shipping on top of $33 for the insert. Much less expensive to make one.

I have the same saw. Thank you for the post.

I have been wanting to do this for my Delta saw. Congrats on starting a channel!!

@abboudworkshop9404

3 жыл бұрын

Thanks Denver! Go for it! It was a fun little project and I got to learn about some intricate details about my saw in the process.

great video. Thank you.

@abboudworkshop9404

2 жыл бұрын

Thank you!

Awesome stuff. Keep it up man

@abboudworkshop9404

3 жыл бұрын

Thanks! Will do!

I will follow your steps except all of the safety mistakes.

Buenas y saludos desde colombia, a este modelo de sierra se le puede colocar el riel deslizante TS?

@abboudworkshop9404

10 ай бұрын

I do not know what is a TS sliding rail.

Learnt a lot thanks, I have the C10RJ not C10RJ(S) only difference I noticed, is mine does not have that lock for the plate, my plate locks in with a little lever on the plate itself.

I have this saw, and really appreciate you posting this video. Can you please do a video detailing how you removed the riving knife??? Thanks in advance!!!

@abboudworkshop9404

3 жыл бұрын

I actually saw it on another youtube video but I don't have the link handy

@troyfromwork995

2 жыл бұрын

The only way I saw was to use a Dremel to cut the bottom of the riving knife.

You could use your fence to hold insert to make the cut instead of clamps

@abboudworkshop9404

3 жыл бұрын

That would have been a good idea for me to do :)

Great video . I am new to woodworking . I made this but my keep coming out from the back. Blade is lifting my insert so I am not using it . Can you make one for me ?

When you switched the circular saw blade with the table saw blade, did you have the blade in reverse order?, I noticed the blade brand facing the wrong side and saw dust came out on your side of the table saw.

@abboudworkshop9404

3 жыл бұрын

You made me look closely... it was in the correct orientation :)

Are you happy with the saw? I find lots of reviews of the older model, but nog about this one and i'm seriously in doubt between this one and the dewalt 4792 (similar but a lot more expensive). Best regards

@abboudworkshop9404

2 жыл бұрын

I have been happy with it. I had it a little over a year now and have used it a lot. Has been a good investment. And for the money, you can't go wrong.

@rubeng.1309

2 жыл бұрын

@@abboudworkshop9404 thanks for the quick response! If you ever think about making a review with your likes and dislikes, don't hesitate tot inform me 😅 Think you would help out a lot of people in Europe and i would love to share the link ;)

Does the saw still roll over to 45^

@abboudworkshop9404

10 ай бұрын

No

man...where are your safety glasses when using the router??? Spectacles, are not the same thing!!!

Can you put a dado blade on the saw?

@iabboud

2 жыл бұрын

Yes, I used a 6" dado stack in it. I think I could do an 8" too.

@jameslund221

2 жыл бұрын

@@iabboud how do I remove the riving knife

@iabboud

2 жыл бұрын

@@jameslund221 checkout this video to learn how to remove the rising knife. I used an ocilating saw. kzread.info/dash/bejne/Ymilt7qcqMXNf6w.html

@brich2929

Жыл бұрын

@@jameslund221 you have to cut the notch in the knife with a saw. Dremel or oscillating tool

@abboudworkshop9404

Жыл бұрын

Yes i had an 6" dado