I applaud standing! You will hardly find such simple and excellent content. Well done, boy. No show-offs, no extra words, everything is clear! Bravo!!!

@WorkshopFromScratch

10 ай бұрын

Thank you 😁

@semi-sane5149

3 ай бұрын

Apart from NO Dimensions being provided 😢

Got to say I would figure it be cheaper to buy a used one. But sometimes it's the adventure along the way. You did a great job on it.

Incredibly good job! Impressed with the patience with the build.

What an ambitious project. Kudos to you. Very well done mate!. As usual, better than store bought. Next, a spin balancer? .

Great job buddy! 😉

@WorkshopFromScratch

11 ай бұрын

Thank you buddy 😁

@juliocesarangel9380

11 ай бұрын

Good job muy friends

you are an experienced mechanic ! It can be seen from the way you make and arrange tire replacement tools that are efficient and practical to carry! Nice video ❤❤❤❤

Very nice build. I used to change tires. One suggestion to make the upper arm easier to work with. Try using a compression spring through OD of the rod so when you release the knob and push it over, the rod will move up out of the way instead of dropping down or holding it to lock it again.

@Thelemorf

11 ай бұрын

Was going to write exactly this. Every professional machine is equipped with a spring like that.

@noelhenderson8095

11 ай бұрын

I mentioned exactly the same thing once that is done it will be pretty good

@duncancremin1708

10 ай бұрын

Yup. Bead unroller should lift up when released, not fall down onto the rim. Not a large a mood work to make the modification, but a huge improvement in usability. The bead breaker might want another look, too, to cater for different tyre sizes. They’re usually at a compound angle, rather than straight on, too, to help draw the tyre away and avoid the bead falling into the rim and causing damage to the sidewall

@spiritzweispirit1st638

10 ай бұрын

Attach a Metal file with JB-weld' to a strong old sawzall blade' then to attach to the sawzall _ 'and maybe that could be part of a helpful File system?!

@gyanendrakushwaha480

10 ай бұрын

​

Wow! That is better quality then most high cost, mass produced ones I've seen and used! Excellent job 👍🇨🇦

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Could you imagine what things the guy could build with a CNC machine. Ive enjoyed every video this far. Excellent quality of work and design and craftsmanship. Thanks for the videos 9:37

Essa máquina é profissional!!! Parabéns!!!

Jestem pod wrażeniem, zarąbiście ci to wyszło 😃

@nkem76

5 ай бұрын

Po co to spawac jak można kupic urzywke za 800zł niszczenie energi by się pobawic To sie pognie przy nisko profilach I jak twarda gówm Maszyna do rowerów i starych złomówe ROZBIERANIA MIEKICH GUM =

Might add the air blaster for getting tire seated.... you got this far so its not even a challenge for you now. I have modified a few of these machines because of no mig welder or other nice welding tools. Even with all the stuff in front of me, the pattern is probably most important part of building one myself. I am seventy three so brain is slower than cold molasses. I started permanently in the southeast alaska islands right after coming home from nam in seventy. I was a diesel, gas, fab, welder, and not too bad of a story teller in those days. I did get my hands on a coats 40/40 tire machine that was rebuilt more times than letters in the alphabet. I then one day for no reason exception of boredom, make a larger one that handled the truck tires on "highway truck tires" but the off highway rims and tires were just manual labor intensive. Used a lot of starting fluid to seat tires back then. Of course the rule of thumb was bigger the easier applied most of the times. One weak link in yours is the foot controls will start leaking so needed to fix which meant removing the sides and fixing. I used a propane tank for air blaster to seat tires most of the times with most tires under the twenty four inch rim sizes. Just a simple all release of air in that tank would solve seating those tires to the rims. Teaching anyone how to determine the side up to mount and dismount. Lots of jokes about "are you from arkansas" were used on fellows who just didn't understand how dang easy its going to be if ya thought ahead. I best stop here as too long of comments are just that.... too long

Fantástico trabajo!!! La soldadura industrial es un trabajo que siempre te llena de satisfacción, también de quemaduras. Enhorabuena.

I think the next tool you buy should be a vertical band saw. I will never need a tire changing machine, but I definitely enjoyed watching your build process. Thanks.

Superb video recording and editing. No high speed playback, no music. With tool and machine sounds.

PRETTY WORK ! I was trained, most of my young life as a Machinist. I was raised in one and built a little shop but nothing as nice as what you have to operate. Be very proud of your shop and your skil level. Be sure to use your PPE, so you won't be hampered if something comes after you. Thanks for your video. I SUBBED. Bill, from Tn. 🇺🇸

@ilirkajca3473

10 ай бұрын

K 0:11 😮 b

I watched this again. I have never been more impressed with a build Simply outstanding.

One of the most educational videos. Good job.

I have been following for a while. And the things you build are absolutely brilliant. Now, all you need to make is a balancer. Keep up the great work.

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

That is really great. Congratulations on the new tire changing machine.

That looked factory made. A really great project. Well done.

I think you did a fantastic job buddy. It looks really nice. Looking forward to seeing more of your work. 👍👍👍

Another skilled Polish craftsman. Amazing skills and imagination. Great work

Now that's a tire changer! Lol! I finally have a working welder, but I need some more tools & material to do something like this... that's pretty amazing how much research into tire changers you had to do to build this thing! Excellent job! Wish I had one! 🖖🏿😎👍🏿

One man factory, really appreciated your work.

What an ambitious project. Kudos to you. Very well done mate!

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Wow I was a tire fitter for a year or so in the 80's, I don't reckon the machines were half-way as nice as yours. Your a frigging genius

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Beautifully done, you tied in a lot in a small convenient footprint.

Nie no przegiąłeś 😂 , fantastyczna robota, teraz wierzę, że w garażu da się wykonać wszystko🤩😎💪

@WorkshopFromScratch

11 ай бұрын

Hehe 😁 Bez tych części było które udało się kupić w przystępnej cenie było by znacznie trudniej. Dziękuje 😁

Some people are such brilliant fabricators. Wish I had that gift. Guess you could post a plans list and instructions. Bad ass job !

*What a marvelous hands you’ve got* ! 👍👍

Absolutely top notch workmanship!!! Art from Ohio

Rất tuyệt vời luôn nhé bạn cảm thấy rất thích xem líp bạn rất mong được đồng hành cùng bạn nhé It's very great. I really enjoy watching the video. I look forward to accompanying you. Thank you for sharing.

I wish I had a tenth of your talent. Simply amazing watching you create. Thanks

@WorkshopFromScratch

11 ай бұрын

Dziękuje 😁

Great project!.....Great shop too...........wheels are a nice touch, ive been contemplating adding wheels to free up floor space.

Absolutely a lot of thought building this. You are a professional

Most impressive build I've seen in a long time. Very nice.

Brilliant job. Thanks for sharing.

That sir is an awesome video. You did a great job building your tire machine.

Support those that create amazing machines. Love it. ❤

This is fantastic, well done! If I hadn't seen the video, I would have thought it was a commercial product you bought, not built.

@WorkshopFromScratch

10 ай бұрын

Thank you 😁

The creative mind and fabrication abilities of some people amaze me!

Skvělý projekt👍

As usual, better than store bought. Next, a spin balancer? 👍

@WorkshopFromScratch

11 ай бұрын

Thank you 😁 If I complete the parts at such affordable prices as for this machine, then I will do it 😁

Awesome build I bet parts weren't cheap but will pay off in time thanks for sharing

Incredible, amazing build. I dont know how much one of those costs that a shop might buy, but I imagine you now have a professional machine for around 1/10th the cost ... now you can show us how to make even more amazing vehicles at an even faster upload rate 😎

@WorkshopFromScratch

11 ай бұрын

Thank you 😁 When it comes to the cost of such a machine, if I had to buy all new parts, it would rather not pay off, but I managed to buy second-hand parts at auctions at affordable prices 😃 He's working on one of the vehicles now 😉

Well Done! That is a fine tool you made. Bravo!

Brilliant idea. A very useful machine. You just need to make one to balance the tires and you are set for life. 👍👍👍👍👍👍👍👍

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Awesome work here, as always!

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Great video and excellent work!

Wow, this actually makes tire changing much easier

Your an artist at fabrication bro. Very cool.

Holy moly! Awesome build! ❤

Unbelievable, I've never seen anyone build such a masine from scratch. A lot of work. Congratulations.

@HentaizerZ

10 ай бұрын

From scratch)) it is joke.

@fishypictures

10 ай бұрын

M A C H I N E . Just ask someone how to spell it before embarrassing yourself.

Jeszcze wyważarka i będzie komplet ;) świetna robota!!!

@WorkshopFromScratch

11 ай бұрын

Jak się uda w przystępnej cenie znaleźć części jak do tej maszyny to czemu nie 😁 Dziękuję 😁

Do you have the plan on this? Very much appreciated if you share one..😊

Vc é o cara como se diz aqui no Brasil quando o cara é bom parabéns!

Jak zwykle świetna robota bardzo lubię oglądać twoje filmy łapka w górę i pozdrawiam

@WorkshopFromScratch

11 ай бұрын

Dziękuje 😁

That's just brilliant, dude! Fantastic work!!! 😃 Stay safe there with your family! 🖖😊

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

I fund the channel I'm going to learn metalworking from .I'm Contractor I drive digging machines doing in concrete. All that kind of things. But I always wanted to learn how to do metal work. And you are very good at what you do. So i'm very happy to subscribe to your channel. Best regards from denmark to you and your family stay safe

Oglądam każdy film i za każdym razem jestem pod wrażeniem... Chciałbym kiedyś umieć chociaż połowę tego. Pozdrawiam 😃 🔥

@WorkshopFromScratch

11 ай бұрын

Dziękuję 😁

@user-bj8um6rj4i

8 ай бұрын

​@@WorkshopFromScratchحقيقة روعة. عمل متقن . مزيدا من التألق صديقي. تحياتي من الجزائر

This is one of the best vids I've watched Kudos

Excellent fabrication job. You have great skill.

This is a real quality job , it is not a home made job That much equipment you are using i think you are doing for famous quality factory.. Excellent

And here was me thinking i was clever welding up the ducks head for my little harbor freight tyre changer, great job buddy

That is amazing man. Now can you make a road force balancing machine as well?

WOW! Very Nice! Great Job! 👍😎

A true master, he makes it look so easy. Top man

Wow that is awesome. I would love to see how you would build a manual. Here in the USA alot of people modifying harbor freight manual tire changers. I feel like it could be done even a little better.

you've made a television, congrats!!!

Excellent. I don't know if this is your own design, one modified, or someone else's-either way you've outdone yourself here. *Great job!*

@WorkshopFromScratch

11 ай бұрын

Thank you 😁 I modeled myself on factory and professional machines. It may not be as professional as some shop machines, but it does the job it was made for 😀

@rossilake218

11 ай бұрын

@@WorkshopFromScratch How long (hours) did it take to make such a machine? Cost of materials? Thank you, Beautiful job. I have all the machines/welders/saws/lathe/BP. . Do you have Drawings? 👍

Wow. Just wow. Very impressive work!!

An excellent build of a fairly complex but very useful garage machine. I'm impressed how your from scratch machining and fabrication capabilities have progressively evolved from almost nothing to what you have now with each build (or rebuild of used machines like the lathe) each adding more and more capabilities. Your design, fabrication, machining and welding skill improvement since you started has been impressive.

@WorkshopFromScratch

11 ай бұрын

Thank you for your appreciation, I have no education in the field of machining but I am interested in this subject and I am constantly trying to improve my skills even though not everything works out for me, I still make a lot of mistakes and sometimes make bad decisions when designing :)

@kentswan3230

11 ай бұрын

A curious question. Watching how your designs go together got me to wonder what kind of conceptual and dimensional design process you use. Do you just make draft sketches with dimensions and update those in the shop or do you use a cad program.

Que lindo trabajo amigo me gusta un monton siga adelante estimado es usted un genio y comparte sus ideas eso es lo mas fructifero

Really awesome, great job!!!

Very, very cool! Great job.

Unbelievable!! Nice job!!

Very nicely done 👍👍👍

Nicely done. Now that’s how to do a video. No talking just doing with no annoying accompaniment music 👍

This is awesome!!! Great work

All you need now is a rim balance machine. Great video

So Incredibly Awesome!🏁_ 'now just needs to figure out how to make a balancer!'🤔 Thank you for the Really Great Video!'👍

Man, I just love your work!

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Ну вот ,теперь нужно балансировочный станок сделать.👍

Meus parabéns ficou topdlinha 👏👏👏👍

Excellent work 👍👍👍. Thank you for sharing. Be safe 🇨🇦

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Wowsers you build these things for a living very good work 👍

Master of his craft, genius.

Destilando o Mundo, Parabéns pelo vídeo criativo. Alexania | Goias BRAZIL

Excelent job man!!!! Cheers from Buenos Aires!!!

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Awesome job!

So how many people can say they designed their own tire machine from the ground up? Excellent work.

@jrand2631

11 ай бұрын

Well, to be fair he actually didn't, he bought a lot of used part from the old machine, and he used the old table as a template to build the new one. He even says so in the description. 😊 But still an impressive build. He took a lot of old parts and build a brand new tire machine. 👍

@WorkshopFromScratch

11 ай бұрын

Thank you 😁 Yes it's true I managed to buy a lot of used parts for not a lot of price for such a machine and that's why I decided to make a machine modeled on a factory machine 😁

@mostafatk7759

10 ай бұрын

لم اعرف مهمة الهواء و مهمه الموتور الكهربائي هل ارجو التفصيل واكون شاكر لك

Very impressive work. Can't wait for the next video

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

This dude is super talented.

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Ótimo trabalho. Abraços.

Nice work and that pop will get you every time

Excellent, as always, thanks.Cheers.

@WorkshopFromScratch

11 ай бұрын

Thank you 😁

Very good. I will use your video as a guide to make the same machine for myself! Thank you friend!

@WorkshopFromScratch

11 ай бұрын

Thank you 😁 I'm glad the video is helpful to you 😀

Grande engenharia aplausivel, Os borracheiros com poder aquisitivo instavel é que vão adorar esta maquina

Awesome video Great work !