Loved that magnet handle, time to shop for a new toy...tool!

That old file was just laughing at that bandsaw. lol

@TheArtofCraftsmanship

3 жыл бұрын

True

Now I know what to do with all my old files ... your technic is fun and not that hard to learn. I will be using other files to shape the knives ... We The Few appreciate you taking the time to teach us ... OORAH!!

Love them both. Keeping the original makers stamp adds so much character too.

they became magnetised because of the single direction of grinding, the friction causes electrons in the metal to align magnetically, the magnetic holder would help do that a little too, but that would be more of the case if you remove the holder in a sliding motion multiple times.

@paullyons7621

2 жыл бұрын

Well, the effect of the magnetizing is certainly to align the electrons, but the mechanism operates at a somewhat higher level than that. Within the steel there are micro-crystalline 'domains' in which the atoms are arranged into a regular 3D grid. Each domain is magnetized, because of this regularity, but the domains are randomly aligned, so the different directions of magnetization cancel each other out. When you heat the metal, the domains are more free to vibrate and slide around than at room temperature, and if there's an external magnetic field, they tend to align with it. When they cool down, the magnitude of their vibrations decreases and they stay in that alignment, although the reduced amount of vibration at room temperature, coupled with the repulsions between adjacent North and adjacent South poles tend to push the domains out of alignment, so the magnetization decreases slowly over time. When you heated the metal by grinding it, the external magnetic field was supplied by your magnetic holder, but the earth's magnetic field has the same effect, albeit a smaller one. When ships were made of rivetted plates, the impact of the riveting hammers during the assembly process jostled the domains in the iron, causing them to align, and magnetizing the ships. Amazing what you remember, more than half a century after leaving school.

@lukacsnemeth1652

4 ай бұрын

not friction magnatization, they were magnetized by the holding magnet when he was flattening the files on one side.

Those are lovely. I like the one with the finger cut outs best. I really like that you left the old Nicholson maker's stamp on them.

@TheArtofCraftsmanship

2 жыл бұрын

Thanks Ed.

I like that small bench drill press. good size.

@TheArtofCraftsmanship

3 жыл бұрын

Thanks. I need to build a stand for it to get it off of my bench, but I do love it.

At 10:52, I was hoping you'd say "Both of them are done, they are looking really _SHARP_ " 😂

Don't have a favorite i like them both great job

@TheArtofCraftsmanship

2 жыл бұрын

Thanks! B-rad IS rad.

Nice bevels on your knives

@TheArtofCraftsmanship

3 жыл бұрын

Thank you. Having the correct grinder set up helps tremendously.

Afternoon, Dustin... We all admire your work, but I'm also admiring your shop. No-nonsense, traditional & functional basement workshop. I've never been so happy and satisfied as when spending time in my shop...

thank you much. looks like a good rainy day destress project :)

original cut before the extra design is perfect. kinda looks like what came outta the Jokers boot when he was fighting Batman.

Merci

As a typographer, even though it wasn't flashy, I just thoroughly enjoy seeing people write their own title cards. Cheers. The video was super helpful as well 👌

@TheArtofCraftsmanship

2 жыл бұрын

Thanks. I really enjoy making by the intro drawings

beautiful tools...thanks for sharing!

Man that kukri was sweet! This is a really neat idea for somebody just starting to get into knife-making it doesn't have all the equipment yet! A+

@TheArtofCraftsmanship

3 жыл бұрын

Thanks brother

@sudo_nym

3 жыл бұрын

Agreed. It’s a favourite build of mine on this channel 👍🏻👍🏻😎

@michaelhedgepeth5106

3 жыл бұрын

See, ...Damn, that's scary . Sorta, just by reading ya comment an Knowing how my pea brain thinks, well, we was thinking nearly the same thing in a sense 👍

Very informative!

My grandfather worked for Nicholas file. I grabbed them up any time I come across a u.s. made one. Maybe he touched it 50 plus years ago

I need one of these... past time I made one I guess! Nice build, Dustin!

@TheArtofCraftsmanship

3 жыл бұрын

Heck yeah brother. Do it.😁

Cool project

It was a pleasure to watch you work on them. Art? Without a doubt! Craftsman? Yes, you are!! They're Beautiful! Ace!

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Phil

More niceness Dustin. Knice work.

@TheArtofCraftsmanship

3 жыл бұрын

Thank Tim

Impressive would be making files from old rusty knives.

@TheArtofCraftsmanship

2 жыл бұрын

Lol

I have a ton of old files I can make into these. Nice job. The heat and using strong magnets to grind them magnetizes them.

Those turned out fantastic!

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Chris!

You always do really good work. You pay attention to the little details which is often what separates amazing from adequate.

Beautiful mate. Love the finished product. Now for all those old files I have in stock 😂. Thanks for yet another great video. take it easy.

That's amazing.

@TheArtofCraftsmanship

3 жыл бұрын

Thank you brother.

Love the finger groves.

@TheArtofCraftsmanship

3 жыл бұрын

They did turn out fantastic.

Wow love them both

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Judith. I do too.

couldnt have timed it more perfect, #I found some old rusty files in the ccollection of tools I got from dad. another great video from AOC

@TheArtofCraftsmanship

3 жыл бұрын

Thank you Ali. Send us a pic if you make one.

I really do like them .I've made knifes out of files . I have been making fix blade knifes now for 6 years and love making them . Great job you did on them .

Just did the very same thing only I used a old cheap chisel complete with handle. Great idea using a file.

The one with finger grips would be the one I like

@TheArtofCraftsmanship

3 жыл бұрын

I’d does feel great.

I like both!

@TheArtofCraftsmanship

3 жыл бұрын

Me too. Thanks Nolan.

Hi Dustin, my hero!! Jajaja. Just a new video from the MASTER. Congratulations for this new job! Greetings from Madrid.

@TheArtofCraftsmanship

3 жыл бұрын

Thank you so much Miguel. Next time I’m working on a bow I’ll be thing of you😉. I appreciate the compliments as always.

@Miguel_ON65

3 жыл бұрын

@@TheArtofCraftsmanship Great Dustin. It is a big detail from you!!

Very nice

Great final product. Congratulations.

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Tony. They are fun.

An excellent work ⚔️👍

@TheArtofCraftsmanship

3 жыл бұрын

Thanks

Great video! However, I’m still looking forward to you making sheath for that beautiful kukri from last video. Keep em coming I enjoy watching!

Seems like a good way to make throwing knives too!

@TheArtofCraftsmanship

3 жыл бұрын

👍🏼😁

Love it man! I foresee this video doing very good! Cheers guys! 🙌

@TheArtofCraftsmanship

3 жыл бұрын

Thanks James!!

@bocheef

Жыл бұрын

Where do you guys get those magnets to hold your files while you grind ? Been looking around and can’t seem to locate em. Cheers guys awesome work 👍🏽

I really like those little task lights you have.

@TheArtofCraftsmanship

3 жыл бұрын

Thanks. They are great and super cheap.

@TheArtofCraftsmanship

3 жыл бұрын

www.amazon.com/gp/aw/d/B07ZNR9JCT/ref=psdcmw_1063292_t1_B012C240BS

@danielmiller2886

3 жыл бұрын

@@TheArtofCraftsmanship thanks!

Enjoyed the video. Your led light is awesome! Both are good

@TheArtofCraftsmanship

3 жыл бұрын

Thank you

Bad ass blades bro

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Will

@williamknapp9497

3 жыл бұрын

No thank you!! I have learned so much from you on your Chanel, great job!!!

I like the one with side finger grips best.

Top will copy one. 🍻

@TheArtofCraftsmanship

3 жыл бұрын

🍻🍻🍻

Very neat, I think I might go ahead and cold blue them black... (?)

A simple project (after that insane kukri) but producing two beautiful marker knives. I’ve made a couple of these with small warding files (I don’t have a belt grinder yet). Love to watch you work whether it’s a simple or hard project. My preference would be for Devon’s version.

@TheArtofCraftsmanship

3 жыл бұрын

Thanks Earthdog!🙏🙏

The pieces of file not used can be used for flint and steel too. David West KZread channel has done a great video on how he did his.

@TheArtofCraftsmanship

3 жыл бұрын

Definitely. I have so many.

I assumed my existing tools (and patience level) would heat files up enough to lose their temper. But now (for lathe tools) I have a slow speed grinder and an Al2O3 wheel that keeps things cooler than high speed Al2O3 wheels (albeit it wears faster, even being slower, guess sit's part of staying cooler). So you just made me realize I'm better off now for playing with file knives. And I'll just be careful like you with the sander.

Philadelphia checking in. I know Buckin wanted some heads forged I was wondering if he ever reached out to you. It was good to see you on his live feed. I think you guys would be great collaborating.

Some files are only surface hardened, but with a relatively softer core. It's a bit of a gamble but as long as you check - older ones can be case hardened just as often as the newer induction hardened ones I have found. Cheers from Oz.

I really like the one with the finger grooves. Nice simple project, Thanks.

@TheArtofCraftsmanship

3 жыл бұрын

Thanks James

Amazing work. An adequate alternative is about $18 on amazon. I know there is joy in the making though, so put your own value on that.

Second here. As soon as it came up i got on lol🤣 Maybe you should start a gaming channel like me and gabe. It would be awesome to finally have an adult in the GAO gang ya know wat i mean

@ebayylindy

3 жыл бұрын

its Lindy btw

@gaogamers5335

3 жыл бұрын

Nani

The countersinks you did turned out nice and even. I often get a jagged look to my countersinks when using a countersink like that. Do you run the drill at a really low speed? Or high speed? Light pressure or heavy pressure?

Hi Dustin. My name is Roger. Loved your video. Your shop is almost as cluttered as mine. You are getting product out of the door. That's what is important! Some guys have a shop so clean that a guy could eat off the floor. But are they getting anything done??

Your brother does a great job with the videography. KZread videos are almost as much about the video quality as they are about the content. I've seen KZread videos with really informative content but the lighting and editing (or lack thereof) make it really hard to watch them.

I love the intermingling of classic machine tools & current materials, supplies & techniques. Very nice.

a high carbon piece of steel can be magnetised by working it (essentially striking it), which rearranges it's atoms slightly with each hit. grinding/sanding is essentially a rapid repetition of tiny hits.

They became magnetized because you used a magnet to hold them to flatten one side. The same. Reason screws are magnetized after using a magnetic screw gun bit. Nice work.

@Stefanhallusa

3 жыл бұрын

This👆

@jimstillwell4668

3 жыл бұрын

Your totally right. I forgot about the magnet. Also I have found that the static from grinding belt will do the same, but it’s not as powerful. Good call.

@TheArtofCraftsmanship

3 жыл бұрын

Totally true. It’s just never happened to me before. The novelty of it was fun.

@jameshaulenbeek5931

3 жыл бұрын

It can also happen due to friction - drilling through steel, you'll often see the shavings become magnetized to the drill bit, the piece you're drilling, or other steel objects. But yeah, magnets will totally do that.

@danielbackley9301

2 жыл бұрын

@@jameshaulenbeek5931 Yep and that why most machine shops have a demagnetizer.

The marking knife has one side completely flat. Its flat side can be attached to the faceplate without any gaps.

Very nice work, but I would grind the bevels LAST... that spear-point would make me a bit nervous whilst doing all that grinding on the "handle"...

Awesome video Dustin. Thinking Devon and you should switch places for 1 video 😂

@TheArtofCraftsmanship

3 жыл бұрын

See who notices. Lol

the magnetizing was due to the magnetic holder's field being conducted in the files while also heating the files up then quickly quenching. although it can also be induced simply by the way they're introduced into a magnetic field. you can mess with compass needles the same way with a decent 2"x1"x3/8" ceramic bar magnet, you can strengthen and weaken the needle, flip its field, and if careful, remove it. the trick is approaching and leaving the equator, not the poles.

@daos3300

2 жыл бұрын

it's the sanding which magnetises the metal, not the magnetic holder which is negligible, nor the heating.

@liquidstar9

2 жыл бұрын

@@daos3300 you're very right that even sanding itself can magnetize things. a belt sander is essentially a Van De Graff generator. did you know that if you spin a copper bar fast enough it develops its own magnetic field? but the heat can and does play a part too, though at least with soft iron and some steels this isn't the biggest player, and usually you need to have it in the presence of another magnetic field. and in the case of soft iron you really only require a magnet to induce a field. that's what a compass needle is.

QUESTION Sir What is your recommended "new" steel for knife building in a non professional shop and cooking oil for quenching?

@TheArtofCraftsmanship

Жыл бұрын

I’d go with 1084, and quench in warm Canola oil. It’s a very user friendly and high quality steel.

🔥👍🏼

Greetings from South Africa. Oh man Dustin, those are amazing. Love Devons one but they are both awesome.....how do you stop them from rusting again? Take care and be safe

@RaspyOB174

3 жыл бұрын

Any Oil and/or Paste Wax. All readily available at local hardware store

@RaspyOB174

3 жыл бұрын

Of course Oil and Waxes do wear off and need to be maintained with further applications. You could also Epoxy, Polyurethane, clear enamel or clear powder coat or clear ceramic coat then resharpen to reveal the point. Would maybe last longer but would have varying non metal feels to them and destroy the usefulness of the file. You would want to wax or oil whatever portion of the plastic coatings that you've removed as well.

Hey just a tip I learned the other day a vinegar bath helps remove rust not sure if its 100% true but worth a try to see if it helps

@TheArtofCraftsmanship

3 жыл бұрын

It’s definitely true. It will also remove any patina that’s on the surface, so if that’s important to you, avoid vinegar.

the one with finger holds

Do you think this would be possible with just a bench grinder and an angle grinder?

Is that a Sprunger drill press? I have an old one I got from my uncle If not, it sure looks like one...

Where did you get the red magnetic thing you used as a handle to sand the teeth down with?

@TheArtofCraftsmanship

3 жыл бұрын

Harbor freight. Just a few dollars.

Hey there!

If you want to contain the heat in one spot, just clamp it in the vise, it will act as a heat sink

@TheArtofCraftsmanship

3 жыл бұрын

That’s a great tip. Thanks

Very nice work. What is that magnetic handle you use while sharpening?

@RaspyOB174

3 жыл бұрын

A welding magnet! Available in welding supply sections of hardware store

@TheArtofCraftsmanship

3 жыл бұрын

These are great little handled magnet I get from harbor freight. www.google.com/shopping/product/7940545139898128400?q=harbor+freight+magnet+with+handle&client=safari&hl=en-us&biw=375&bih=553&tbs=vw:l,ss:44&prmd=sivn&sxsrf=ALeKk02_G_sE8VS5H_xJPB2gsWCtUeyHsg:1615243331724&prds=eto:13474008259769739706_0,cdl:1,prmr:1,cs:1

That’s an awesome grinder Dustin Can you tell us where you got it? Who makes it? 👍🏻👍🏻👍🏻

@TheArtofCraftsmanship

3 жыл бұрын

Yes sir. It’s a 2x72 Revolution grinder from Brian House, at Housemade.us.

@sudo_nym

3 жыл бұрын

@@TheArtofCraftsmanship Great stuff 🙏🏻👍🏻 Thanks for answering 👊🏻

I bet you could get some kiridashi-esque functionality out of those. Maybe cutting thin leather and such. I’ll tell you what I use for marking dark steel or heavy rusted steel. Get the metallic silver sharpies. The light silver ink (paint?) shows up much better against dark material than black or blue ink. They are a bit more expensive than a regular sharpie, but not as bad as paint markers or silver pencils. But hey, what am I telling you for! Didn’t you go to art school?

@TheArtofCraftsmanship

3 жыл бұрын

Great tip. I’ve made similar process Kiridashis in the last.

Great video! Now, how would the common man make these without the belt sander?

@neila9251

2 жыл бұрын

Angle grinder

What is the bit you used to countersink the lanyard hole

That welding magnet you used to hold them is probably why they are magnetic now, along with the heat from friction. You can test this by rubbing a pin or needle with a magnet in the same direction of a bunch of times and it will become magnetic. Then you can float it on a leaf (or bit of orange peel) and it will rotate to point North.

@Janosch_on_fire

3 жыл бұрын

this old tony has bought a small electric demagnetiser, looking forward to that too. i dont quite like the idea of sending my costumers knifes, that collect mettal dust

@RaspyOB174

3 жыл бұрын

Yea there are cool easy and cheap ways to DIY demagnetize as well!

@Janosch_on_fire

3 жыл бұрын

@@RaspyOB174 for example letting the knife drop several times ore smash it against an walk 😂

@TheArtofCraftsmanship

3 жыл бұрын

That’s a good point.

Hi, I have an 8" bench grinder and a 6" polisher. I can't seem to find a wire wheel with the correct arbor anywhere. Can you tell me where you get yours? Thanks.

I like the straight one more, but the rear is not mine, what the hole?

I'm almost to make that step...to begin a little forge an metal work of my own. Always wanted to since working the farm with my Papa Many years ago. Something would break and off to the smithy we'd go...just never took the time

@TheArtofCraftsmanship

3 жыл бұрын

That’s great. What a great memory.

Nice little project. The lanyard holes are not needed for any woodworking tool so I'd pass on that feature. The 1000 grit would be a minimum finish. Marking knives are usually taken to the grit of my chisels and planes. 6000 and 16,000, and yes, you really do notice a difference.

@TheArtofCraftsmanship

3 жыл бұрын

Wow. I hear ya. Sharper is always better. Thanks.

May I ask why you didn't anneal the section you wanted to cut first?

@RaspyOB174

3 жыл бұрын

Such a small section on a small tool. You don't need to anneal in this situation. Much Quicker to grind while hardened and no risk of warping

@RaspyOB174

3 жыл бұрын

Plus the hardening process done to Files is much harder than you will get on your own hardening process. Add with the chance of warping the knife during this heat treat and it just doesn't make sense to go through all of that. Grind with cooling dips and just get it done quickly (: Good Job

In before the people whining that a relic was destroyed.... Nice work as usual, sir.

@TheArtofCraftsmanship

3 жыл бұрын

😂😂😂

Where can I get the light he uses on the bench vise?

@chrisholton7353

3 жыл бұрын

Amazon. I just recently got one myself.

@UndeadMaggotsArmy

3 жыл бұрын

@@chrisholton7353 thank you

@TheArtofCraftsmanship

3 жыл бұрын

www.amazon.com/gp/aw/d/B07ZNR9JCT/ref=psdcmw_1063292_t1_B012C240BS

Don’t take this the the wrong way my friend , I love your work but I also have a huge man crush on your beard. 😊

They magnetise because the midichlorians within the chemical structure of the electrons rise to the surface and search out for other midichlorians.

Howdy Sir, Would it be possible to get a # so I may send you a picture of one of my creations?. I'm sure you'll get a kick out it. Thanx Robert

Mate great work but please get a face shield, those wirewheels fling off wire at 1000kmh and go right through eyes.

@girthbrooks39

Жыл бұрын

You ain't kidding! That wire completely ruined your eyes dude.... I know you couldn't see it however, he was actually always wearing eye protection whilst using every machine in his shop.

@LancsManDoes

Жыл бұрын

Haha I know what you mean, I learned the hard way getting a peace lodged in my eye just below the pupil. One it hurts like hell and two it not great having a doctor come at you with a scalpel saying “stay right still”

@gw5436

Жыл бұрын

@@LancsManDoes Hope you still got your eye ok mate!

高手在民间

Where do you get all of your files?

@TheArtofCraftsmanship

2 жыл бұрын

I’ve been picking them up from yard sales, junk shops, thrift store, and flea markets for years. Also, a lot of people have given me bunches, since they know I look for them.

@nathanodle8039

2 жыл бұрын

Ok thanks

There not that old of files the black diamond is new stuff and it can be casehardend so you might need to Harden it anyways

@TheArtofCraftsmanship

3 жыл бұрын

You may be right, but these were definitely through hardened.

don't you know file makes your band saw dull witout any softening.

A project anyone can do as you use your $1500+ 2x72 knife grinder. I would be more impressed if you used hand tools the average person has to complete the project.

@TheArtofCraftsmanship

10 ай бұрын

That’s also a good idea. I’ve got other videos using hand tools also. Thanks for watching.

@southernblueblood5402

10 ай бұрын

@@TheArtofCraftsmanship I watch your videos and have been a subscriber for a long time. I will continue to watch your videos because I learn many techniques and get ideas, keep the quality videos coming. 👍

Get a piece of wood and use them to practice your knife throwing. Those should work great for that.

@TheArtofCraftsmanship

2 жыл бұрын

Not a bad idea Frank.