This was a huge project and my longest video to date! A long overdue update to my IR cooling paint project, this time using common and very affordable materials. Besides the paint itself I was happy to discover some new methods for making size controlled calcium carbonate microspheres. That may prove useful for all sorts of things. www.patreon.com/NightHawkProjects

@jbaldwin3092

10 ай бұрын

wonder if an airless sprayer might work, these can spray thick paint. Could these pigment be mixed with car spray lacquer and sprayed on. Some of the colour shifting paints don't dissolve and have to well mixed into lacquer (ref: dip your car channel)

@jamesmihalcik1310

10 ай бұрын

By far this video is the most informative and well designed video I've seen in some time. Concise, with references and intuitive explanations! The tech is superior in so many ways due to ease of use, price point and availability. The tech is also cutting edge with novel viewpoints. Most importantly, you have shared this for free, speaking volumes of your character and thought process. Bravo and thank you.

@linearburn8838

10 ай бұрын

I wonder what carbonated water would do?

@Saintcause

10 ай бұрын

How about automatic Ikea shutters one with the cooling paint and one black. Depending on the temperature they one drives up an the other down. With that temperature control in a room would be pretty easy.

@johnsmith-zy7xg

10 ай бұрын

This is just brilliant...cutting edge science, in your kitchen! I tip my hat to you sir.

I'm a chemistry professor and I run a research lab. I spend an embarrassing amount of time consuming science content on KZread. I can confidently say that this is the best research process I have ever seen demonstrated on KZread. Presuming you have robust and reproducible data of all the observations you present in this video, this is easily a publishable project and I think it would benefit A LOT of people if you were to pursue publishing this work. There are a lot of people in my profession who wouldn't be inclined to follow the science presented in a KZread video, but would confidently follow the exact same science if it appeared in peer-reviewed publication. I don't think they're correct in that perspective, but I know that bias exists. Anyway, please consider publishing this work, and if you wanted or needed any input to help pursue that I would be more than happy to offer any assistance I can. ABSOLUTELY EXCELLENT WORK!

@Nighthawkinlight

10 ай бұрын

Thank you very much!

@jmacd8817

9 ай бұрын

Have you considered (or tried) using a clear acrylic paint as your binder/resin? You may lose the scattering effect of the water inclusions, but you may end up with a coating that has some environmental durability. To test, just put some of your powder into some polyacrylic paint (Minwax makes one) and test rest them side by side in your box. The other advantage is that a paint based solution would be applied using a roller.

@DarkPhoenix1515

9 ай бұрын

@@jmacd8817 I'd like to see it tested with clear hobby acrylic paint as base and if some thinner is used, it should prob be sprayable with an airbrush or equivalent

@neveralonewithchrist6016

9 ай бұрын

CIA.... CHEMISTRY IN ACTION

@terry5008

9 ай бұрын

"There are a lot of people in my profession who wouldn't be inclined to follow the science presented in a KZread video, but would confidently follow the exact same science if it appeared in peer-reviewed publication." Interesting since a large number of research papers and even peer-reviewed publications have been shown to be garbage. I guess you can chalk that up to the hubris of the expert class.

No joke, as a PhD candidate, I feel like you’re genuinely putting a lot of scientists to shame with such an excellent presentation. This is what good science is, not this ivory tower crap we’ve got so much of now. My PI acts like we’re real hot shit just because we have some reasonably fancy and nice equipment, but the way we do science is just not the way it should be, and you’re demonstrating how great science is when you do it right

@Nighthawkinlight

10 ай бұрын

Thanks, that's a high compliment

@insu_na

10 ай бұрын

@@GeorgeWashingtonLaserMusket It's a bit of an oversimplification. It's easier to get published if you already have a good reputation, but it's entirely possible to publish without a reputation as well. The real problem are the large journals/publishers like Springer et al. As a non-established scientist you're probably better off publishing to SciHub than through a traditional publisher...

@Impatient_Ape

10 ай бұрын

Maybe we shoud ignore the fact that the "ivory tower crap" he points out around 18:07 had conclusions which "were super helpful".

@aga5897

10 ай бұрын

The thing is, What you can start exploring depends on what you Know. All learning is Good. Having fancy machines can make some things so much easier to explore, which is Hot Shit !

@Dollapfin

10 ай бұрын

I’m an undergrad involved in research and it pisses me off. We spend as much as the government will give us and get equipment that’s like $50 for a nut and our experiments don’t go anywhere because the shit breaks and there’s no one to fix it. I could do so much more with $2000 than my PI. He’s great, but science, like government, is too big and wasteful to do anything good nowadays. We should be exploding with knowledge because of the exponential growth of knowledge, but we aren’t because it’s being bogged down with white collar bullshit and they spend all their time in worthless fucking meetings while my own interests and ideas aren’t shit to them. I’m gonna save the world without them and do it on my own or with people who are actually bent on making progress.

My company is in R&D for sky cooling liquid applied acrylic roof coating. We are using a crosslinking acrylic that "mends" together between coats to create a solid, durable membrane. Given that this recipe is out now..I guess it doesn't matter to keep it a secret anymore lol. I will make a new video with results of small scale tests. We currently have capacity to produce 30000 square feet of 60mil thickness of liquid applied membrane. It can be sprayed with a standard paint pump, or rolled on with 1-1/2" nap. @Nighthawkinlight thanks for this amazing contribution. This will not only reduce heat waste, but also reduce consumption of electricity for air conditioning. My hat is off to you!

@Nighthawkinlight

9 ай бұрын

Very much looking forward to seeing your results!

@consciousnessinabody

5 ай бұрын

Wtf more info? What a gold mine for potential roofing applications.

@raoulvandervliet1652

4 ай бұрын

I would seriously like to buy paint for about 100m2. I live in the Netherlands. If possible, let me know please

@shtfengineering7472

4 ай бұрын

UPDATE: Our test results were better than other coatings in the market, but only by a fraction of a percent! As we added more powder to the ratio, the resulting membrane developed microfractures, some of which went all the way through. So it was a no-go. We are now developing a prefinished roof panel system instead. This takes out all the guesswork and human error that occurs while spraying or rolling it out as well. It will take some time to recover from the losses incurred from the coating system tests. In short, we are giving a customer another new roof.. We will be putting together a panel coater conveyor system complete with heated curing. There are many hoops to jump through for metal paneling to be approved by the various testing organizations, but I am going to be optimistic. We have learned that using very thin coats and a more rigid acrylic base gives the sky cooling results, but it is not as durable. (pressure washer with brine added to the soap dispenser to simulate the expensive salt water test) We will likely provide a variety of sky cooling panels that range in warranty length and, inversely, sky cooling effectiveness. All this to say results will be coming in a few months more.

@ishanr8697

Ай бұрын

Thanks for the update, keep them coming!

Dude, there are some damn smart people on KZread and you are on the short list at the top. Your videos have always been impressive, but this one is out of the park. As a side note, this is what the internet was designed for. What the academics, engineers, programmers, etc. were all working for. A place to share great ideas with the world. And for those ideas to get improved by others, which then leads to more improvement. Which is friggin awesome!

@joda7697

8 ай бұрын

Like literally though, it was made to share scientific discoveries, papers, data. That was it's original purpose, back when that one guy connected all the computers around CERN to do just that. And then someone went: "Wait, what if this, but worldwide though?"

This is actually incredible! Seriously, he just took something that was previously very impractical and created a recipe that can not only be mass produced, it's also easy, safe, and inexpensive enough to do at home. And he posted it all on the internet. For free.

@H4KD11

10 ай бұрын

Whats the frl rating though?

@troywhite6039

10 ай бұрын

It's more difficult to move a tree than a panel in the winter.

@pingASS_

10 ай бұрын

@@OskarHerschplanting a tree that takes 30 years to even make a difference?

@JamilKhan-hk1wl

10 ай бұрын

@@OskarHersch You can do both at the same time

@iano0100

10 ай бұрын

​@@OskarHerscha tree won't make you go sub Ambient temperature..

absolutely love how this dude vanishes for months and comes back like "sorry for the absence guys my NASA grade research and development that I conducted in a barn took longer than expected" love the work and how well put together your videos are dude. I eagerly and patiently await future breakthroughs!

@igotes

10 ай бұрын

I would much rather watch a 40 minute well researched and well produced video once in a while than a blink-and-you-miss-it short every day.

@uis246

10 ай бұрын

Knowing how much NASA likes to "crank the silly thing"(actual comment in AGC source code as annotation for astronauts), I wouldn't be surprised if NASA already hired him.

@pbs41if3

9 ай бұрын

Better have patience to wait, bc this is bs. He should stick to programming. No one coming up in science ever took soil chemistry. And people think they can just take a crack at it and independently arrive at stuff they could have looked up in school. This is worse than selling solar anywhere east of the salt divide in north America or bogus windmills with wispy blades. Hey everyone let’s whitewash everything like Tom Sawyer. Hey paint my fence for me, it’s fun! That’s all that’s happening here, fancy whitewash. It’s diminishing returns making the spherules. Just paint things white smh 🤦

@TayWoode

16 күн бұрын

Honest quality content takes time to produce and get results. I chuckle at the ones that say “I halved my calorie intake for a month ” yet three days before had “I ate double my calorie intake for a month” and between they have countless other videos they couldn’t possibly be able to do “I visited every disney theme park worldwide in a day”, “I stayed inside every wonder of the world for a week covered in mayonnaise”

An engineer here. Your through explanations, procedures, and presentation are really top notch. Nice work. I concur with the pinned comment from the chem professor.

I had a dream about making this last night, and painting it on the roofs of houses, after falling asleep while listing to NOVA's "Climate Change Crisis." Hopefully, if I don't get to do that, someone reading this will and we won't fight others doing the same. I'm passionately inspired and deeply moved by your determination to make this. Thank you for reminding me what it means to be a scientist. I hope you can get nominated a Nobel prize for this contribution to humanity's future.

@Nighthawkinlight

9 ай бұрын

Thank you very much!

@JOSEPH-vs2gc

9 ай бұрын

Volcanoes and solar flares have more effect to "climate change" than humans ever will. I have no problem with the paint itself, but don't fall for this media-hype of the world falling apart because too many cows and cars belched out gas that natural processes such as photosynthesis can solve on their own.

@darwinjina

9 ай бұрын

any progress on making it a roof coating?

@rheadog9546

9 ай бұрын

@@darwinjina I work on Buildings as an HVACR dude. Roofs have been increasingly turning from Black to white over the last 20-30 years. (I don't understand why they were black to begin with? Other than glare? But obviously heat efficiency should have always been priority over glare. The problem is keeping them clean, It is literally impossible. Roofing materials are some of the most durable/flex products on the market nowadays and they still stain and get dirty over time. Obviously we walk all over the roof to fix and install things. He brings this up in the video. Still, a white dirty roof is going to be far cooler than a black roof. But the real money in this project is finding a way to get it into PVC or similar roofing materials. Exciting! I love watching nerdy videos like this, and he explains everything in a way we can all understand. New subscriber here!

@Valchrist1313

8 ай бұрын

@@rheadog9546 You answered your own question. "I don't understand why they were black to begin with? ........ The problem is keeping them clean, It is literally impossible."

I first discovered your channel when I was 12 in the good old days of actual life hacks and cool experiments. You were one of my favorite channels among CRH, hacksmith, TKOR to name a few. I am now 21 and you have consistently amazed me and thought me more than school ever did and I want to express my gratitude and love for what you do and who you are. Thank you.

@Nighthawkinlight

10 ай бұрын

Thank you very much!

@EigthGate2015

10 ай бұрын

I gave this a thumbs up, but edit your shit. Although, the misspelled word does lend credence to your claim. Ha!

@alfredforbessealy524

10 ай бұрын

@@Nighthawkinlight hacksmith and tkor fell a LONG way. Good job staying human and making good stuff and explaining stuff without taking the audience for morons. your channel is one of the very few I still watch and follow, even after touching grass.

As a chemist, I love how you make things my colleagues and I would spend thousands of dollars on to research, just with household objects. You are an inspiration.

@the_original_Bilb_Ono

10 ай бұрын

Seriously, this dude is a legend. Been following his channel for years and he's like a blue collar Einstein. Probably a better comparison out there, I just can't think atm. His channel has gotten me through so many at home projects.

@aga5897

10 ай бұрын

Er, about those thousands of dollars - where do i send my bank details ?

@whoever6458

10 ай бұрын

I always like when it's chemistry one can do at home too since I no longer have access to all the fancy stuff in the lab.

Your multiple rinse steps may actually shrink the size of your microspheres a bit. Nanoparticles have a very large surface area so, even though CaCO3 is pretty insoluble some it will dissolve in the rinse water. I discovered this was true when I tried making magnesium fluoride nanoparticles (as a polishing agent). Multiple wash cycles eventually caused the MgF2 to totally disappear! Using LeChatelier's Principle, I found that adding a very small amount of a water-soluble magnesium salt prevented this. You also might be able to use this "problem" to your advantage if your smallest particles aren't quite small enough.

@mikemotorbike4283

Ай бұрын

This is a wonderful tip which invites an experiment!

@joelmanthis9523

11 күн бұрын

Holy crap, this is genius. Just off the top of my head I feel like the most important parameters to test are to find a way to determine how much (if any) the Water temperature, Duration of each wash cycle and the nanoparticles size will contribute to how much degradation (shrinking) of the spheres occurs. Once a consistent method of testing these parameters is developed and employed, this can be applied with a large array of applications where density, temperature and likewise even pressure (such as hydrostatic pressure in any type of stratified fluid) are key principles to how efficient said application can be. Like using Aqua Regia for dissolving Gold.

My interest in science and research has been shaped by people like you on KZread. Thank you for your efforts. It has made a big difference to many people.

@Nighthawkinlight

8 ай бұрын

Thank you very much!

@bananashowtime

7 ай бұрын

Thank you for putting your money into something that is useful... for people like me .. poor but can benefit from this person ... I hope my idea comes thru

Nighthawk casually returning after 3 months is like an early Christmas gift

@bobbylong4443

10 ай бұрын

❤ I love your teaching

@thaphreak

10 ай бұрын

With a bag of white powder 🤭

@tinkerstrade3553

10 ай бұрын

Unexpected, to say the least. And a subject I myself have explored. 👍

@andrewdoesyt7787

10 ай бұрын

@@thaphreakblue

@deepwinter77

10 ай бұрын

And he returns with a banger

I normally don't comment on videos, but I just wanted to say that the content you are creating is singlehandedly pushing the boundaries of home science. In addition to how well the information was presented, this discovery could absolutely be a breakthrough in home cooling, and it is done using very simple materials and at a level that anybody could replicate. This is truly inspirational material for any future scientists; please keep up the great work.

@alphawolf0020

10 ай бұрын

Former STEM grad student here - I've seen the term "citizen science" thrown around in research papers! It's exciting to see breakthroughs like this happen in an accessible way!

@brianmi40

10 ай бұрын

I've said before that developing this into a quality coating material should be a government initiative and the product should be sold at scaled prices to an individuals income level with limits to allow enough paint per person to use for personal use. This technology clearly has the capability to effect our national electric consumption for cooling costs measurably across the sun belt for a large portion of the year and if leveraged into removable panels, could impact even more northern areas for the Summer months. I think we are fast reaching the point that everyone should be contacting their government representatives to make this happen.

@surajchougule4351

8 ай бұрын

@@brianmi40 Will be doing that soon. Are you interested?

@brianmi40

8 ай бұрын

@@surajchougule4351 Thanks, I've picked up everything myself to make a batch, including 2 different mediums to apply it with (i.e. Spar Urethane). Am traveling now, but when home next I'll be making a small test batch and working on getting a good medium and proper mix to achieve the reflectivity. In the meantime, more than a little shocked someone didn't immediately contact the Purdue guys and get this headed into the market. SOMEONE is going to sell a LOT of this when that happens and the roofing manufacturer that gets it integrated into their product will do the same. Happy to swap notes though.

The way you are inventing truly innovative and socially productive things out of such accessible resources using principles of chemistry and the scientific method, is incredibly fascinating. I have never seen anything quite like it on KZread.

My folks live out in the sticks in Central Texas, no river and no wells. They have a rain catchment system but there’s been no rain so they’ve had to truck in water. What they do have is humidity. They put a condensation recovery system on their AC and get a good 3-5 gallons a day off the AC for their 150 sq ft cabin. My Dad and I are trying to figure out how to use these panels as condensate catchers to farm water from the air. Right outta Tattooine :D We’re also going to cover their water tanks in this stuff and see how it holds up to the weather. The tanks aren’t shaped in a way that allows for the film shield, but right now the dark green tanks heat the water so hot we can’t bathe the baby in it. Just getting it down to ambient would be great. BTW I knocked together a spreadsheet that gives you volume and price predictions based on how many square feet you want. It’s tuned to the local stores but should be easy to modify. Let me know and I’ll send you a Google doc link. (Edit: I mean, I'm sure you had to price out all that R&D you did, but this one could be published. I can polish it up to make it easier for people to customize)

@Mawyman2316

Ай бұрын

Still got that floating around?

@salikabbasi5448

Ай бұрын

Aluminum siding has pretty high emissiveness and could work well too.

@Laecy

17 күн бұрын

@@Mawyman2316yep I’ve got it somewhere. Sorry I missed your message earlier - if you still want it I’ll send you a link

I have a feeling that in 20 - 40 years a bunch of really accomplished people will cite you as an important childhood influence. I can't think of another time where the process of making & iterating has been so visible.

@jerbear7952

10 ай бұрын

My 8 year old watches with me. He wants to be an inventor. :)

@placeholdername3907

10 ай бұрын

​@@jerbear7952based son

This dude really just out here making lost recipes and coming up with new ones out of the blue every 3-6 months. Never disappoints

We need more people like him who share valuable, important, helpful information (simplified) for a better world.

I live in a 29 foot long, 7.5 foot wide fifth wheel. That's a BIG metal box. My brother lives in a 10 ft wide and 50 ft long mobile home- a bigger metal box. Here in New Mexico, it's HOT, HOT, HOT in the summer. This could not only help people, save money but it could save lives in the summer!

DUDE!! What you did on your “kitchen counter” for less than the cost of of an expensive meal for two was what colleges spend hundreds of thousands on to discover. Well, well done!!

@Vintage_USA_Tech

10 ай бұрын

85 % of college is a scam they wast your life indoctrinate you and then if you have a breakthrough Idea they will steal it and if your lucky maybe they will give you a small footnote in the patent that they file on your hard work and maybe and this is a big maybe you will get a $180,000 dollar a year job out of it your insight and hard work, good luck with college, more then likely you will end up working for Burger King or Amazon to pay off your scam debt.

@beryllium1932

10 ай бұрын

He did a great job. But, it's important to recognize that these radiative cooling ideas are bouncing around everywhere these days. The research that is the foundation of it: chemical, coating, IR cam, atmospheric science is high-funded research. "Standing on the shoulders of giants." If you take a killer photo with your iPhone does that invalidate, say, Ansel Adams?

@Animaniac-vd5st

10 ай бұрын

Mind that he refers to several papers he read about it. THAT is where that research money went to and exactly how it should be.

@tv-strategies

10 ай бұрын

It's almost like academia is broken

@EigthGate2015

10 ай бұрын

Ever price a microscope that can take videos?

here is a "pro tip": often you can just email one (or more) of the authors of those papers and just nicely ask them for a copy. Most often they will be happy to share it, since they are scientists and arent even getting paid anything from those absurd prices (they actually have to pay to publish their paper and get nothing in return from the publisher besides being published)

@Misack8

10 ай бұрын

That is, when they respond. I e-mailed an author for a paper about yeast on pineapple rinds and how they develop. I'm still waiting for a reply to this day.

@Thingsandcosas

10 ай бұрын

@@Misack8there’s that site where you can put in the ID# and it gives you the paper..I forget the sites name

@Misack8

10 ай бұрын

@@Thingsandcosas Yeah, but I wanted to go throught legitimate ways before resorting to "other methods"

@amritkhadka82

10 ай бұрын

I have tried it few times but I feel like my emails end up in their spam folder. So I have to use scihub. Itis a blessing for a countless student who can’t dream of paying of that much for single article.

@berttelgarth5827

10 ай бұрын

I've tried that a few times with no response, I just use sci-hub now, I already pay for most of the research anyway.

I had an idea! there is "car dip paint" that is very matte in finish, and is colored the same way that you're "coloring" your acrylic. I wonder if that could be used as the polymer to hold the pigment? If so, that stuff is VERY spray-able and is straight up designed to have micro-pigment suspended in it

@NoSpamForYou

9 ай бұрын

Plasti-Dip is not durable at all

@purplegill10

8 ай бұрын

Wait since when?

@ktwn6702

8 ай бұрын

Durability ... like many things, is a relative term. Compared to what he WAS using... it is likely MUCH more durable@@NoSpamForYou

@marcisaacs9407

8 ай бұрын

What is the car dip paint?

@purplegill10

8 ай бұрын

@@marcisaacs9407 It's a product called plastidip but a company called dipyourcar sells it in bulk in car kits

You are an incredibly generous teacher. And your generosity does not compromise the quality of information. Amazing. Thank you.

You could keep this all to yourself until you achieve a patentable product and instead you’re doing the right thing and sharing your findings in detail with a global audience. That’s commendable as hell, dude.

@TrueHelpTV

10 ай бұрын

technically if he filed a patent now after haven publicly sharing it, its my understanding he can reasonably contest any other patent claims posted after this release date. Hence patent pending; a period of time observed to find other patents or reduce the difficultly to extend or reject said patent based on supporting evidence and ability to file in a reasonable fashion. ~This is not legal advice.

@ChristaFree

10 ай бұрын

No, he should file a patent. Why would him not doing that be "the right thing"? You don't believe that he should get credit or financial compensation for the work he's done? Is very kind and generous for him to share and the information is great. Doesn't mean he shouldn't get sa patent. I would. And so would you. It would be naive not to do so.

@adondriel

10 ай бұрын

@@ChristaFree He should file a patent if only for the sole purpose of preventing someone else from doing so, and monopolizing it like medical companies did with insulin.

@halogeek6

10 ай бұрын

@@adondriel you do know a patent shares the information with the wprld right? You want insulin and dont wanna pay big pharma prices? Look up the patent amd do it yourself. Its only illigal if you get cuaght. And im fairly certain no jury will convict you for making your own insulin.

@TrueHelpTV

10 ай бұрын

@@ChristaFree i dont think he created this

This is the first time I've given money to a KZread creator. And I'm not even 25% of the way through. You deserve so much more for this incredible invention. I'm blown away that you are giving away this technology.

@Nighthawkinlight

10 ай бұрын

Thank you very much!

@AstralKetamineX

9 ай бұрын

There is super white paint out to buy that cools items it's painted on

@phazerave

9 ай бұрын

@@AstralKetamineX does it cool to below ambient temps? im aware of highly reflective paints that prevent heat absorption, but the ability to radiate heat to sub-ambient temperatures would surprise me. brand?

@mineyoucraftube1768

9 ай бұрын

and this is the first time i see a donation in the comments section

@phazerave

7 ай бұрын

@@mineyoucraftube1768 and there are a lot in this one.

I love how much effort you put into low cost reproducibility. Technical and monetary barriers often seem to be a main reason new technology takes so long to reach the general public in any substantial way, but when you address it right from the start I think it will help shorten the gap between conceptual and applied technologies. I can't wait to see what other options you come up with for solvents, binders, and delivery methods for the pigment!

This is such an interesting video! I wish chemistry in school had been so inspiring! My first job out of college was as a graphic designer For a 100-year old screen printing company. (I saw some other comments on that, and wanted to elaborate.) We used to print several different types of inks for decals. Some were water slide-off decals, heat transfer decals, ceramic decals for cookware, cigarette pack tax stamps, and temporary tattoos using makeup pigments. All of these decals had some things in common. Each had an adhesive layer at the bottom. Above that was a base layer. Sometimes a white or silver layer to make the decal opaque. Above those were the colors, each one layered to create the design. Finally, a sealing clear layer. So the design was sandwiched between all of these layers. The layers need to be printed in reverse order on the appropriate paper. You could make “tiles” of sandwiched layers with an adhesive at the bottom by screen printing them like giant decals. Then apply several of them to cover the products!

@DesereckC

9 ай бұрын

I was thinking along with the same lines. Take the human element out of it and use an extruder (3d picturesque) and get consistent layers over adhesive backing and cover it with a protective coating.

@l.scales7516

4 ай бұрын

that is an amazing idea! I think they would need to be interlocking tiles though like some laminate fake wood flooring & like them be produced as rectangles or parallelograms for efficiency & effectiveness but this would truly be genius as one could create portable pavilions,kiosks,car or RV shelters & so much more! I guess I'm thinking of modular set-ups but there's also the thought of finding a way to incorporate this tech into panels erected strictly to see if a large quantity of them in a zone of extreme radiated heat could reduce the rate of global warming without creating more waste materials that would be detrimental as so many other options do !

I worked in the coating industry as a formulator for about 10 years. For application you can potentially look into wire bar applicators to help apply an even surface. Application also depends on if the paint has a low enough viscosity and a low enough surface tension to be able to self level. You could also look into addition of a wetting agent which would likely be some sort of surfactant. Ideally this coating could be made much much thinner in which case you need to ensure an even dispersion of the particles without aglomeration. I loved this video and the level of instruction and detail!

@jeremybyington

10 ай бұрын

If you had a thinner paint wouldn’t you need to apply more coats to achieve the same reflective efficiency?

@Nighthawkinlight

10 ай бұрын

Thanks for the advice!

@brianmi40

10 ай бұрын

@@jeremybyington I would think that getting it into a paintable formulation (brush or roller) would be a benefit outweighing the need for any large number of coats to achieve efficacy.

@SamJac55

10 ай бұрын

@@jeremybyington I guess it depends on how much of the effect is just a surface effect. Reflectance portion is surface effect. I'm not 100% about the emission part.

@galaxya40s95

10 ай бұрын

I was wondering if this could be screen printed. Perhaps on a shirt even....

What a legend. The open source approach to sharing your education and the discoveries you've made with us, is nothing short of amazing. Your consummate scientific brilliance is admirable.

@ScorpionM203

10 ай бұрын

Thank you for this gift sir

Thank you thank you thank you!!! ❤❤❤ It gets unbelievably HOT in Arizona! This can save so much money for folks! We spend $700 a month for air conditioning and I’ve been trying to find helpful videos and ideas to keep the house cool without having to use air conditioning! Thank you for sharing all of this important information FOR FREE 🔥🔥🔥

For another applicator possibility, look up gold sniping. Gold prospectors use PVC to build a suction tube, like a reverse plunger, to suck fine, gold bearing material from cracks in river beds. It's like a big syringe. You could ad an end cap of PVC that's been heated and squished in a vice to give a flat applicator that you could also pull back on the handle to keep back pressure on the paint and prevent it from leaking out.

Bloody hell this is easily more extensive and rigorous research than most PhD thesis. You just doing it for fun and entertainment - let's say I'm strapped in for the ride!

@MikeJones-wp2mw

10 ай бұрын

2 million subscribers 392k views in 2 weeks on this video. He's doing for something more than fun.

@zenginellc

9 ай бұрын

@@MikeJones-wp2mw Weird take..

@paulwary

9 ай бұрын

@@MikeJones-wp2mw Fine by me. More power to him!

@machinemaker2248

9 ай бұрын

@@zenginellc There's nothing wrong with being paid for your work! Everybody's gotta eat.

@filippogamberini4026

8 ай бұрын

@@MikeJones-wp2mw trust me, i'm a PhD student and I saw thousands of euros thrown into messier publications. This is beyond incredible to me tbh.

The most altruistic inventor on the internet I know of ! Thank you very much for this amazing contribution ! God bless !

I love that you used "cull lumber" as seen at 31:40. For anyone who doesn't know, home depot has a "clearance" section where they sell defective/damaged lumber that has purple spray paint on it. This cull lumber is sold at 70% off! Not all HD's have it, but most do. I always drop by to see if there's any usable pieces

@incorrigiblycuriousD61

9 ай бұрын

Didn't know. Thanks for the share!

@otpyrcralphpierre1742

8 ай бұрын

I look for that Every time I'm at HD.

This man is an absolute legend, been watching since I was a kid and the content stays consistent and interesting still to this day, quite an achievement man!

Recommendation for paint/coating application: Attach two parallel guide rails to your canvas, place a dollop of your coating at one end, and use a squeegee perpendicular to the guide rails, wiping down to spread the coating evenly across the rest of the canvas. The height of the guide rails will determine the thickness of the coating.

@HeliBoyVR

10 ай бұрын

Screenprinting.... without the screen. Clever :)

@JoshZanders

10 ай бұрын

That's pretty much what I was thinking, at the right consistency this is less of a paint and more of a putty or paste. Would be pretty trivial to skim-coat large surfaces with a similar method to how you apply drywall mud or plaster on walls.

@Houstonruss

10 ай бұрын

It might be possible to have a solder mask cut (probably in a diamond grid pattern) so you could apply it the same way as a pcb gets pasted. You'd probably need a more viscous coating for it to work though. Spread it on with a stainless scraper, and remove the mask. The fluid should spread out a bit after its removed, and gravity should flatten it out and fill in the missing spots. You could also play around with the thickness of the stainless mask too.

@theharwizard8093

10 ай бұрын

Nice to see that a few of us came to the same solution! However this would only allow for one size of panel, but especially for experimentation would make everything a lot more consistent

This video did a better job explaining some of the math, statistics and chemistry than all of the classes I took on these topics in college. By giving more concrete real world examples rather than esoteric theoretical examples. It also helps thay you're a better teacher than some of the ones I had 🙂

Came for the airsoft machine gun, stayed for over a decade! It’s crazy to think about but I’ve been watching your content for more than half my life so far! Love your stuff, keep up the great work.

I think you should publish a paper on this. You've done the research, you have references to existing literature and you may well have furthered the field. Your brother is a physicist so you have an easy in if necessary. And by publishing a paper you may inspire some scientists ,like those who published the papers you cited, to further improve the method or even some of the things you talked about at the end.

@eagames456

10 ай бұрын

Agreed. Making this a reference-able source could really make a difference.

@TupperWallace

Күн бұрын

So some paper mill journal can make 42 dollars per reader selling his work, as he mentions at 12:11? A number of people with experience in the field seem to have found their way to this KZread video. What is the future, greedy science and tech journals or AI searches that can find all kinds of information? How many “peer-reviewed articles“ had to be retracted in the last couple of years? I’m certainly no expert, but when a major publisher like Wiley has to shut down 19 journals for low quality, anyone would be skeptical.

You should really write a scientific paper about this, to get this out to a wider audience. Your research deserves more recognition

Wow wonderful job! This would be perfect for a small home, or tent! Maybe if the paint is combined with something that can flex, such as a fabric, or maybe vinyl it is possible to create a super cooling shirt! This could be the future of fabrics, especially in the hot sun! I could see plenty of uses for this for maybe even shade structures, to keep everyone underneath cool.

@STEAMerBear

6 ай бұрын

The idea of cooling fabrics immediately makes me think of nano-engineering. Maybe we can “tune” textiles with quantum dot technology to absorb heat when cold and radiate it away when hot. This breakthrough could be on par with semiconductors in terms of potential industries with applications including transportation, energy, housing, fashion, agriculture, and who knows what else?!?!

The _Heisenberg_ of paint. Worthy of winning _The Best of KZread Awards_ . Outstanding content.

When NightHawkInLight drops a 40 minute video, you know he's about to drop some golden knowledge. (Lowkey wanna try this paint on my Sony cameras to see if they would actually work in the Texas sun)

@ChaosPootato

10 ай бұрын

Painting acetone on your cameras probably isn't a great idea

@garrysekelli6776

10 ай бұрын

He is the son of Hawkeye from Mash so I would expect nothing less.

@emperorhadrian6011

10 ай бұрын

​@@ChaosPootatojust gotta put non acrylic base coat on it.

@BeyondSlowMotion

10 ай бұрын

@@ChaosPootato Haha Fair enough. Mostly just quipping on something relatable to fellow video/production enthusiasts. Lol Nice name btw. Got some layers going on there.

@JamilKhan-hk1wl

10 ай бұрын

Lol i didnt even realise it was 40 minutes lol.

In my experience, if you reach out to the authors of a published paper, they are usually willing to give you the whole paper for free, or at a reduced price.

@Nighthawkinlight

10 ай бұрын

I tried with that particular paper but no reply.

@schwuzi

10 ай бұрын

​@@Nighthawkinlight websites like scihub and libgen do help in that regard 😉

@unvergebeneid

10 ай бұрын

Reduced price? I've never seen that. Either they send you the PDF or they don't. Is it even legal to sell the PDF privately, bypassing the journal?

@SianaGearz

10 ай бұрын

@@unvergebeneid The journal plain doesn't get a say in how you use your paper, because you haven't written it on their behalf. The academic institution though under employ of which you have written it, might have a word, but who knows what word that's gonna be.

@rdizzy1

10 ай бұрын

I just use sci-hub, papers for free.

This is the first video of yours I have watched but man I just have to say how much I appreciate you taking the time that you have and detailing this out for those of us who aren't so "hip to the game" lol. I understood everything after you explained it and that is saying alot for me! I am sure it has taken a lot of time and money not to mention effort for you to create successfull experiments and then re do them to make the video breakdowns for us. So I sincerely mean thank you! I normally don't comment either but after hearing you say that you read them all which is also the coolest thing ever I just had to tell you this! Again thanks and please keep up the great work! Ps looking forward to trying brilliant! If they break things down as far as u do then it will be great

@Wyi-the-rogue

8 ай бұрын

Bro just said hip to the game

I've just finished replicating your experiment and testing some of the paint. The carbonate particles [I had 25g of them] are a success, they are in fact lower than ambient temperature by 2-5 degrees Fahrenheit even before they're made into a paint. I'm in Las Vegas during the height of summer monsoon season so every degree of difference can save someone's life out here. I have some notes: -Without a stir-bar, it took a really long time to dissolve the acrylic. I had wondered why the paint was sepparated and thin. -A painter's knife can apply the paint fantastically -The smaller sizes of nanoparticles are difficult to sepparate out and I think I must have mistaken a lot of them for wastewater as they didn't sepparate out after days. -I used a pie tin instead of a bread tin because I'm cheap, it did not work at all.

@Nighthawkinlight

8 ай бұрын

Thanks for sharing your results!

@ragunathl4410

7 ай бұрын

I have also tried to dissolve the acrylic in acetone with water as they mentioned it in the video... But after 2 hrs of heating at 60degree celsius... It won't dissolved most of the acetone evaporated 2 to 3 times I added it back for balance the solution.. While adding acetone again can we add water on it... Or the temperature🌡️ is maintained as he suggested

@Nighthawkinlight

7 ай бұрын

@@ragunathl4410 60C is much too warm. It should be more like 38C. You're boiling all the acetone away at 60C.

@ragunathl4410

7 ай бұрын

@@Nighthawkinlight Thanks for the reply... 1.The hard stirring is required or not for dissolve acrylic. 2.Acrylic not dissolve as you shown 3.After the acetone evaporated to the minimum level few ml of resin only I have got... Kindly suggest me the better procedure for resin making

I love when science KZreadrs work well off each other to do cool stuff like this.

As a physicist, your application of research and scientific trial and error is incredible! The thought of microspheres has never crossed my mind before, but the presentation of your methods and all you’ve learned was VERY interesting. Awesome video!

@Nighthawkinlight

10 ай бұрын

Thank you!

@pbs41if3

9 ай бұрын

Imagine that! Never crossed your mind, well then it surely must be good science! Lol you never once opened a soil science text book. If you had, you would realize this is based on a a rationale that neglects the biggest detail, which is it won’t work in the weather. All I can chalk that up to is y’all can’t conceive of earth systems. Your chemistry knowledge isn’t framed by how these reactions play out and interact in the environment. The only system that accounts for all of chemistry in a way that demonstrates how the periodic table works is in the soil. If you studied this, you’d realize silicon is best suited, not carbon. It’s like a very basic thing, you either see it or you don’t.

@camrodam

9 ай бұрын

​​@@pbs41if3lo and behold, a lone youtube commenter who has all of the earth's wisdom.. ;-/

I loved Mr Wizard when I was young. (I am 68). I have basic high school chemistry knowledge. Your presentation explained this process in a way that made complete sense. You are Mr Wizard Redux!

Pouring spheres into the container was a great way to explain the why and how you went about the solution..... I look forward to seeing how well it cools the shed.

Probably going to get lost in the comments, but you should look into silica encapsulation of your particles to waterproof them. Tetraethyl/Tetramethyl Orthosilicate can be used in small quantities to create thin coats around particles of all kinds using many of the same methods you demonstrated, not the safest thing to work with indoors though.

@konstantincolovic6360

10 ай бұрын

Should be safe if you do it outside and very very carefully. Did a research project with TEOS recently, can confirm it does exactly as you said.

@jean-clauderainville677

10 ай бұрын

I've been looking into silane as a sealant and adhesion enhancer for hollow microspheres as syntactic foam components. Just my twopence worth... 😉

@Thingsandcosas

10 ай бұрын

Do you think just mixing them together might work?

@sihamhamda47

10 ай бұрын

Yes, hydrophobic compound, the most important substance to prevent water absorb and mold growth

@acs147

10 ай бұрын

how do you make it? there's a simple to buy compound that I could use instead?

you sly dog! using the bird to keep us watching during the sponsored segment is pretty clever. all jokes aside, you are incredible, your content is incredible, and everything you do is cool, informative, and really feels like you, as a single person, are making real advancements in science for the layman.

@theguy6847

10 ай бұрын

The man knows his audience

I came up with the perfect original name for this coating you invented! It reflects light from the star in our solar system, and emits it’s own IR light into space! It should be called Starlight!

I love how well you have documented the process, with excellent results as well. Thanks for sharing this

I think this is a huge and enormous breakthrough. Maybe because other findings are hidden, but this knowledge given freely to the public is revolutionary

I'm so glad that you, tech ingredients, and Robert Murray Smith are aware of each other. Stuff is speeding up. 😊

Your application process with the spray bottle can be improved by one of two methods. I use a pump up sprayer for large economical applications. Your local garden center sells them in many sizes from quart all the way to several gallon backpack sprayers. The other option if you're able to make it thick like drywall mud... Then you could simply use a drywall mud Hopper and sprayer to spray on thicker applications such as walls or large surfaces. Hope that helps!

I cannot put to words the amount of information and entertainment I get from this channel on every single video.

As a chemist, I must admire your dedication. Some of what you have done here might be applicable to making artificial opal from sodium silicate solution , a project that I have been thinking about trying for a long time.

Ben, you can't imagine how precious your videos are to the community. Not only your stuff is really innovative, you also explain the science behind it, give information about your findings, and the best thing is, you make it open source. I'm not sure if you still working as a teacher, but if you do, I hope your students appreciate it.

Best channel ever for easy to learn, practical, and accessible science. Well done

The king of logic right here. I love the break downs as it all comes together.

I first discovered your channel years ago when you were building pvc air cannons. I was surprised by the innovative yet easily accessible designs for the homemade piston valve. Since then I have watched every new video you post. All of them are very engaging and informative. Your channel stands out as the gold standard for science channels on KZread. Now that I'm older and have a job, I can finally repay the creators who have influenced me throughout the years. Keep up the great work!

@Nighthawkinlight

10 ай бұрын

Thank you very much!

This channel is a scientific gem. The dedication and innovation is so admirable.

Love your clever way of keeping people from skipping the sponsor section. I actually listened to what you were saying!! Good job.

Phenominal video, thanks for sharing all your work and knowledge!

Okay, this earned my Patreon support. I've been a fan for years and I think this video exemplifies why @NightHawkInLight is not only a KZreadr's KZreadr but a genuinely kind and caring human being trying to do his part to make the world a better place. This is such a beautiful application of Open Science and it is an honor to be able to support you in your work. My mind is always blown, I always learn a lot, and I'm always well entertained. Thank you!

@shanee7511

10 ай бұрын

Agreed but it also showed an example of a much too common instance of NOT Open Science with the research paper ($42) he purchased that like so many was behind a pay wall. I didn't catch the source of the paper but if it originated from a tax-payer funded institution and was available to the general public, if not freely so, it should not cost the tax-paying citizens to review.

Just made it to the point you mentioned a white paper you ended up buying access to. Barring a few contracts, the researchers don't see any of that profit, so if you contact them directly they are usually more than happy to send you the whole paper themselves for free. Often, they end up interested enough to answer some questions too.

@Nighthawkinlight

10 ай бұрын

Couldn't get a reply this time unfortunately

@StupidBoots

10 ай бұрын

@@Nighthawkinlight To add to this, there is an even easier solution: most universities have some public-access computers within the university domain, which generally has no-login access to any databases of papers (usually guest computers in the library). Or, just ask a friend who works for a university? It doesn't cost us anything to download individual papers the uni subscribes to, and everyone thinks the per-paper model is terrible.

It's sweltering 45 degrees Celsius here in Bangladesh... absolutely loved this video! It really makes sense now... we need more channels like this on KZread... ❤

Genuinely amazing! Thank you!

For your comments about using citric acid and it not being picky about water quality afterwards, I'll add that in soapmaking, citric acid gets used commonly and it performs "water softening" in the bar. When mixed with the NaOH used in soapmaking, sodium citrate is made in-situ, and keeps sodium soaps (i.e. sodium + fatty acid) in solution, vs them reacting with calcium and magnesium in the tap water, making calcium or magnesium soaps that are less soluble and leave soap scum, and the suds of the soap are less sensitive to water hardness (to a point, everything has its limits)

@2degucitas

10 ай бұрын

What is the usual lye/citric acid ratio?

Actually reading the comments? Well I love your informative, cleanly cut, no nonsense videos. You really show off the magic that is chemistry! You could be developing this shit for millions for companies but you just do it for our entertainment instead xD Love you!

You are such an inspiration man your videos have helped me find purpose in a dark place and are still helping keep me excited and inventing in a much brighter one. Thank you so much night hawk in light! I'll send you a video of my next prototype and I hope you know how much what you do helps people learn and feel alive and empowered with knowledge. Love and respect and gratitude to you brother. You've been inspiring and helping me for a long time and I'm glad to be able to thank you now.

This was a very impressive research project, one that could lead to serious advances in heat management techniques. Hats off man!

Other commenters have said it better, but just, wow. These videos are an inspiration to future generations and show that science is approachable, testable, and practical. Amazing work!

You outdid yourself yet again. What's more this time you even managed to outdo Tech Ingredients which is immensly impressive. Compare them spraying 50 different coatings over the course of the whole day against your cake frosting application once AND your ingredients are even more accessible. Bravo! You really could start a chemical company, you're definitely further ahead in this than any research lab out there. And then there's your non-flammable fireworks.

This video as well as the video you made before are both so awesome. Thank you for not rushing the videos and taking the time to explain things so that those of us that are not as well educated as yourself can understand the basics of what is happening and even understand why. I really enjoyed watching. ❤❤❤❤❤

okay. Hear me out. I'm positive that my suggestion is going to throw off the math, but I do think it's worth some consideration to make the paint more stable and add to its strength. I've been looking into mortar additives to increase flexibility and decrease cracking over time. The solution is to substitute latex additive for the water to the dry mortar mix. I think this might work with your paint because both paint and the mortar are behaving well with calcium carbonate in my own mixes. The latex additive was a revelation for me because I already have experience with the combinations we're talking about. I craft a LOT and acrylic and latex do play well together. I use both acrylic hobby paint with and latex sample paints - mixed with calcium carbonate - to make my own recipe for chalk paint. It's very flexible and durable. I can switch back and forth between the two paint ratios to change the color and, as long as one isn't drying out, it makes no difference if I use only one, the other, or any mix of them both. The calcium carbonate behaves and the solution is stable. If you try to mix your acrylic formula with the mortar latex additive instead of water, it might destroy everything you've got going for you so far - or not. You might end up with a more rubbery coating that sticks just fine and doesn't mess with your heat reflecting properties at all. I would think that you could see very quickly if it was going to work for you or fall apart. It would dry pretty darn fast. The one part I'm struggling to puzzle out is how to get rid of the acetone, then add the latex. I don't think it would go well to mix the two things. Unfortunately I won't be able to try this myself for awhile, but I'll add this to my 'to do' list for next year.

you, applied science, braking taps, tech ingredients, thought emporium and others are doing a great job making highly specific and technical knowledge available to laypeople like me.

Unlike some other channels who either flat out lie or did minimal research and then stretch that out to an hour video. With deep sounding music to sound intriguing. Meanwhile you: Disappears for months, drops a banger of a video full to the brim with interesting easy to digest information that you actually try. I love you man ❤. Like you can tell that you actually took the time researching the topic and actually putting it to practice and then seeing about how you can put it in laymans terms for us

Night hawk no matter how long your gone we will always be here because your video are awesome.

Thank you for figuring this out & sharing it widely - the planet thanks you!

@Nighthawkinlight

9 ай бұрын

Thank you!

Intentionally misusing kitchen equipment?!? I'm in!!!😂

A coarse threaded rod should approximate a Mayer rod, for a quick trial. Also, this was a staggering amount of r&d and one of best chemistry videos on KZread that I have ever viewed. Well done!

@pbs41if3

9 ай бұрын

That’s a shame bc this is not chemistry. This growing a chemical garden. You can buy a kit if you want to hear words like nucleation and be impressed

@ergohack

9 ай бұрын

​@@pbs41if3Note they said best chemistry video, not best chemistry in a video. There is a difference, and the snobbery shown in your comment is ill-suited to the comment section of an *educational* video.

Been following you from the very beginning, leaving a comment on such a great quality video is the least I can do. Keep it up, your methodology and thoroughness in this project is impressive!

You are the best in cutting edge scientific procedures. Really! Greetings from Italy.

I'm stunned by the amount of push you gave to this technology, and then I'm stunned you made it free, for everyone. Ben, if there's a time for you to feel accomplished, now's the time!

You should try screen printing as a method of applying your mixture. It produces very even layering but you are constrained by the size of the frame used to hold the silkscreen taut. No need to expose a pattern on the silkscreen, you can just place it on your substrate and squeegee the mixture through the screen to apply it on the substrate.

@yakmedic8511

10 ай бұрын

I just posted the same idea and then scrolled down to read the other comments and found you had beat me to it, the only difference in my idea was to just have runners/rails/shims that are the height of the desired paint thickness on the side of the substrate that the scraper/squeegee would ride on. You could easily "paint" a 4x8 sheet of plywood with a concrete bull float riding on a few rails.

@android01978

9 ай бұрын

I was thinking screen printing while watching the video. I’m not sure that silk screen will give a thick enough coating on one go and wonder whether wire fly screen could be a good option. For thicker coating.

@gluehuff43

8 ай бұрын

As a screen printer, this is exactly where my mind was going. The screens/applicators could be made very quickly and easily. Just get a large portion of mesh with a micron size that allows for the larger particles to pass through. I’m sure this could be aerosolized as well. There are plenty of differently sized nozzles for paint guns. I just came back from a low rider show and some of the flake used in the paint jobs has to be a good amount larger diameter than the microspheres he’s using in the process. Also. If the paint is self-leveling to a degree, why not just use a roller to apply it to larger surfaces?

Wow I watched it all the way thru...amazing look forward to what else you discover...

My SO went to art school, and they learned how to make different paints at home. A) They said you can make a vinyl based paint. You mix a strong (usually construction grade) pva based glue (such as the Cascorez brand) with the pigment. Mixxing until you achieve the desired color and consistency. B) Oil that takes longer to dry: Add 1 liter of boiled linseed oil to about 1/2 kg of pigment. The exact amount of pigment depends on the color, the product, and the oil. Mix a thick paste. Add more linseed varnish until the paint is suitable to cover and put on. C) And the way you did in the video where you dilute acrylic plates in acetone and mix the resulting liquid with the pigment. I wanted to make a video testing them out but I won't be able to for a few months.

Dude… this is INCREDIBLE. I’ve been super fascinated with these paints since that paper come out a while back. The fact that you developed a method to create this type of coating from cheap and easily accessible materials is so inspiring. You seemed to have nailed the creation of the pigment, so I think a big next step for the community is finding a more durable and applicable base to suspend it in. 🤔 Great work!

@SianaGearz

10 ай бұрын

Hello.

@avelkm

10 ай бұрын

​@@OskarHerschYeah, try to cool a house with a fan (and it doesn't consume energy at all, yeah). I don't see a problem with protection if it's just a plastic film (or some sort of other coating)

What a freaking legend! NightHawk is the only channel that can drop a 40-minute video that I will drop everything to watch. This is probably the coolest science video I've watched on KZread that actually makes me want to try it out for myself.

@igotes

10 ай бұрын

NightHawkInLight produces great content with experiments that are accessible to the masses, but in my opinion Applied Science has the most cutting edge stuff. Not really the sort of things you can make at home unless you're quite wealthy and have a few PhDs though.

A very instructive and well executed video sir! Congratulations!

Excellent! I may show this to my chemistry and engineering classes.

You probably wouldn't believe me when i say that part of my choice to become an engeneer comes from this channel and your awesome ability to teach (i started watching this when i was 14 and now i am 18). Thanks for your dedication and keep up the good work, love from Italy

@pbs41if3

9 ай бұрын

If you want to know and teach chemistry. Study agriculture. Everything you need to know about chemistry happens in the soil. It’s literally the interface between biology and geology. He’s taking a snapshot out of context that can be only appreciated after studying the whole picture. Draw your inspiration from how soils work. Want to learn about packing densities? Look at the molecular chemistry of clay aggregates. It’ll get heady very quickly and you’ll be sorry you underestimate the intricacies of soil.

Not sure about other countries, but in Hungary, CaCO3 is traditionally used to paint exterior house walls, although not as commonly nowadays. By heating CaCO3, CO2 is released, and CaO (égetett mész) remains. Adding water to it, you get Ca(OH)2 (oltott mész) and heat. That can be painted on the walls, and it absorbs CO2 from the air, and hardens to a white paint of CaCO3 (mész).

@namAehT

10 ай бұрын

Also known as lime wash in other parts of the world. Plus if you make it out of sea shells instead of mined rock it's carbon neutral.

@TheMilkywayboy

10 ай бұрын

We have this too, 30 years ago we used to spray it almost everywhere except inside the house. Trees, work shops, animal dens, concrete fences, those big round vents in an energy/heating plant. I want to see a comparison now to see how much his method improves it, I bet that acrylic will really give it a boost.

@alexlo7708

10 ай бұрын

But this dissolves back to water in the rain. So it needs a protection layer.

@szaszm_

10 ай бұрын

@@alexlo7708 It shouldn't, unless you have acid rain. And it's repainted every couple of years.

@alexlo7708

10 ай бұрын

@@szaszm_ Every limestone can dissolve in water. Acid just speeds up the process. Out of dissolve problem, there are still problem on dirty surface from any cause which it raises up heat.

Not sure how or why your channel slid into my feed but it is one of the best things that has happened to me. I watched this video with the marvel and awe a child feels with their' first school science project. You explained everything I have ever wanted to know about cooling paint, why it works, and what my next steps are. I personally will not recreate your process but can move forward with my next paint projects enlightened with understanding and will choose my paint with the knowledge to make an informed decision.

This is a DEEP video! There's a LOT to uncover here and you've definitely explained this topic well. This has to be one of the most comprehensive videos on a scientific topic that I've watched in a long time. Keep up the good work!