Watch out, if a flame gets into those glass bottles, they will quickly turn into glass frag grenades.

@skillmake

Жыл бұрын

Therefore, I have used water as a one-way valve

@TW-mw3qk

Жыл бұрын

Please consider a different enclosure for the fuel cells. A modified plastic soda bottle (if you want it to be clear) or pvc would be preferable. Browns gas should be treated with respect. Complacency kills

@wesleymccravy901

Жыл бұрын

He made a flash arrester with the 4th bottle

@FlixexXaries

Жыл бұрын

Well,I fire need oxygen to start no matter how flammable the thing it must need oxygen to light up

@FlixexXaries

Жыл бұрын

well thats true

Remider for people doing this: ADD A PROPER FLASHBACK ARRESTOR Should a spark make it through the water, into the generator, the Glass bottles will act like a Frag grenade!

@oilpondsangel1024

Жыл бұрын

I use to use just a bit of cotton.

@Steve-sf8fv

Жыл бұрын

Came to the comments just to say this, thank you

@TheVADERfunk

Жыл бұрын

What’s a flashback arrestor

@TheVADERfunk

Жыл бұрын

I wanna make this. I get it stops the flame from reaching the hydrogen…. However where would I place it? Please, annnnd thank you a bunch. 🙏

@GandhiTheDerg

Жыл бұрын

@@TheVADERfunk A one-way valve for gasses, so if something blows up, it won't travel into the generator

------------------------------ for more 👇 kzread.info ------------------------------

Thanks for watching. I hope you like the video.

@nahlnaml5185

Жыл бұрын

Eta bisa di jieun stove teu?...

@fightbackfakenews

Жыл бұрын

I was wondering if u can help me with some information. If u know. I am going back and forth with someone online about this process to run a car. They keep saying the battery will drain faster then it can charge. Bc u need to borrow energy from to do the electrolysis. But there are already patents that prove it works. The disagreement is for how long

@fightbackfakenews

Жыл бұрын

Does the water have to be destilled?

@skillmake

Жыл бұрын

@@fightbackfakenews Hydrogen engines exist now, but the most important issue is the maintenance of this dangerous gas.

@fightbackfakenews

Жыл бұрын

@@skillmake pure hydrogen engines don't exist. Mostly hybrid. I'm saying without having to recharge like a ev.

Curious have you tried closer spacing by chance? Of the screws for higher effeciency, and lower current draw.

water and electricity are great at releasing hydrogen from electrolytes and metals. All of that original energy that went into making the steel released, wonderful.

@kilroy2517

5 ай бұрын

Um, what? The hydrogen and oxygen are coming from the water being split. This is simple electrolysis. None of the energy that went into "making the steel" is being released. This is a net negative energy system - you're putting more energy into it to split the water then you'll get out of combusting the hydrogen that's produced. That's why we don't have ICE's that use water as fuel. The electrolytes you seem to think are yielding hydrogen contain no hydrogen (if you're using salt) and are simply there to transmit the electrical charge. Even if you're using drain cleaner, which is NaOH, those OH anions can't leave the solution because they balance the Na cations. With drain cleaner, the equations are: Cathode (reduction): 2 H2O(l) + 2e− → H2(g) + 2 OH−(aq) Anode (oxidation): 2 OH−(aq) → 1/2 O2(g) + H2O(l) + 2 e− Yielding: 2 H2O(l) → 2 H2(g) + O2(g)

@dragodv7735

2 ай бұрын

What are you talking about?

I would give some advices for people who are going to make it: 1. Use Sodium hydroxide NaOH (it's easier to find, but does the job fine) 2. Use distilled water, to have a clear solution after it's been running for a long time 3. Used stainless steel wires (or glue them throughly to make the wires have no contact with solution) and use stainless steel electrodes (in here screw) (some of razors are stainless)

@n_kliesow

Жыл бұрын

Steel wool washers have also a big surface ^^

@jackhank2694

Жыл бұрын

Use copper plates instead of steel it'll work better. And yes I know, it's a little more expensive.

@amirreza6526gd

Жыл бұрын

@@jackhank2694 actually I've tried with copper, and that dissolves into the solution too..

@andybilakshow260

Жыл бұрын

@@amirreza6526gd I don't think it dissolves, it electro plates the other electrode

@amirreza6526gd

Жыл бұрын

@@andybilakshow260 for the electroplating to happen the solution salt must be same as the electrode, when the salt is different I think the anode first releases it ions into the solution until it's saturated enough to start electroplating.

Okay, this was an interesting video. Whatever you do, do not place the product gas into a large container. Both of the oxygen and the hydrogen are mixed there, and any tiny spark could cause a large and dangerous explosion.

@LittleGreyWolfForge

9 ай бұрын

Darwin awards here we come…. Removed from the gene pool by his own creation…

@TheInfiniteVoid

9 ай бұрын

Well... An explosion is exactly what I want, I want to fill a small chamber, then apply a spark, to push a piston, to spin a wheel.

@Johny40Se7en

7 ай бұрын

@@TheInfiniteVoid 😄😅 HHO engines! Great stuff and should be more common, same for LPG.

@riff42

7 ай бұрын

F that. Using salt makes hydrogen and chlorine. Not good either. Sick of these deadly and misinformed DIYs

@lgbfjb7160

4 ай бұрын

​​@@TheInfiniteVoidYou might want to research that before you go experimenting. Hydrogen and oxygen combined explode at a velocity much faster than any container could...contain. DANGEROUS. Though I believe there are ways to collect oxygen from one side and Hydrogen from the other maybe.

I got into dry cell HHOs for awhile a couple of years back. The best one was 1/3 battery acid worked awesome except that the positive plates did not last very long.

@bricewillis6577

Жыл бұрын

Use graphite electrodes.

@user-lm1pu8fx1t

Жыл бұрын

NBC,

@mjolnirswrath23

Жыл бұрын

@@bricewillis6577 Palladium polonium platinum Rhodium " " Core of Catalytic converter " honeycomb axial lattice structure too...

@Kevin-jz9bg

Жыл бұрын

lead dioxide anodes would work fine too.

@andybilakshow260

Жыл бұрын

@@mjolnirswrath23 I have heard of palladium being used as a sort of molecular mesh used to aid in separation.

The nice thing about a homemade hydrogen generator is that it needs a battery.

Шикарное решение для того кто хочет получить силикат натрия! Щёлочь, особенно едкий натр, хорошо растворяет стекло! При растворение под электричеством он быстро вступает в реакцию со стеклом, из-за чего теряет свойство выделять водород. Учебник по химии 7 класс! Ну в России точно

@hydrogen-

Жыл бұрын

я использую кварцевое стекло для излучения в процессе электролиза

@vladimirskripotchikov5493

Ай бұрын

Друзья, а яичная скорлупа, вымоченная в уксусной эссенции плюс 2 электрода плюс 2 трубки = на выходе O² and H. Не?)))) Млять. 100500 лет известно явление электролиза. Нахера такие сложности.

This type of hho generator, if it works for a long time, will certainly heat up to +80 degrees.

Bottle 4 is the filter/clarifier. And I have used mine to weld plastic panels. And solder my radio kits my throttle is a sewing machine foot switch. Good rig keep at it.

@skillmake

Жыл бұрын

Thanks for the info!

@aurasensor

Жыл бұрын

Bottle 4 is also called bubbler. Its main purpose is the prevention of accidentally ignited gas flashing back into the generator bottles 1-3. Which can cause explosion of the bottles and severe damage.

Did this before, but it is stupid to collect the oxygen and hydrogen in the same bottle it is easy to seperate them. The different gases come of the positive and negative terminals and used a solar panel to generate the 12vdc. I only combine them when I want to use them. Used them in a welding torch. That one bottle with them mixed is just a bomb.

@jakastudioanimations6014

Жыл бұрын

you dont collect them in the same bottle, they both go in one first as you can see and in this bottle because oxygen is more dense it goes down and the hydrogene is going up to the next tube out then its pretty much pure

@anwarsadath4843

3 ай бұрын

Make a video on that bro

Yeah but due to inefficiencies the energy stored in the hydrogen gas is more expensive than it was as electrical energy.

@TheCompleteGuitarist

Жыл бұрын

Not if the electricity came from a free source such as wind power. Couldn't that be a solution to the inconsistent nature of wind and the storage issues surrounding electricity. Maybe not effecient overall but free is free and some is better than none. I am no expert so I am just riffing on the idea, but the main problem I imagine is storing the hydrogen which surely requires compression.

@mememan2344

Жыл бұрын

@@TheCompleteGuitarist check out Robert Murray Smiths channel. He has a video on a material which stores hydrogen at 10 per cent by weight at room temperature using urea and sugar. You apply heat to get the hydrogen back out.

@francoisdupont3082

Жыл бұрын

Do you know a paper that convincingly prove this? Basically, quantify that generating the electrolysis current from the HHO output is not possible.

@side2k

Жыл бұрын

@@TheCompleteGuitarist nor solar, neither wind energy comes free

@billlanphar4629

Жыл бұрын

that is not true you are repeating the same old line that has been put out there for years to discourage Hydrogen use.

What is the ampere electric intensity consumption ? How many watt-hours are needed to produce one liter of this hho gas mix at sea level temperature ? Does it work with 9v battery ?

@usenli

Жыл бұрын

Yes it works 9v, the more electrons the more H & O separated, so the speed only depends on amps, and a minimun of volts

Да здорово! Это где-то может пригодиться!

Potasio da uma energia muito cara, a solar é de graça.

Cool video, but don’t drill things while holding them

Шампунь, мыло добавь а воду. Получишь пену её и врывай!

Teori Jon Myer,,pun sudah ada di alam yaitu terjadi nya petir bos q,,ya baguslah tuk para kreatif berlomba2,,mengembangkan nya,agar tak menggunakan bahan fisik terus menerus ok bos q

‏‪5:06‬‏ I was shocked when he lit a fire that close, crazy man. This is dangerous. If a spark reaches inside these bottles, there will be a big explosion 🤦‍♂️🤦‍♂️🤦‍♂️

Nice,.. One of the simplest designs I've seen

@oilpondsangel1024

Жыл бұрын

Are you kidding

@troyallen8223

Жыл бұрын

@@oilpondsangel1024 no I'm not who are you?

@oilpondsangel1024

Жыл бұрын

@@troyallen8223 the guy bangin wifey while you at work buddy.

@TheVADERfunk

Жыл бұрын

@@oilpondsangel1024 you seen simpler? 😂

This give me the idea to modify my little plant and get it smarter and smaller.

for quick demo this is ok. this material will not last due to corrosion unless you are using stainless steel.

@skillmake

Жыл бұрын

Thank you for the information you provided me.

@andybilakshow260

Жыл бұрын

stainless degrades too.

@60Oldfart

Жыл бұрын

@@andybilakshow260 using cheap low grade always degrade 304/316 for medical tooling and use for kitchen stuff. 420/440 are the highest grade 100% non corrosive.

@andybilakshow260

Жыл бұрын

@@60Oldfart would that high grade come in wire form? 16gauge or less perhaps? My cell design looks like a string of DNA Works awesome except for the fact it wears out in less than a month.

The only problem is that in the winter time the glass will crack

@E-BikingAdventures

Жыл бұрын

Oh oh. I better get my olives and pickles out of the fridge.

Wer in der Schule in Chemie und Physik aufgepasst hat, lächelt müde über diesen DIY-Tipp. Knallgasproduktion heißt das auch. Deshalb nicht ungefährlich, wenn man das falsch macht und das Verhältnis Wasserstoff zu Sauerstoff exakt 2:1 ist. Das ist hier der Fall.

Could you please explain what characteristics the power supply should have

@Thehotglueguy

Жыл бұрын

use a 12 volt 7 amp hour battery and you should be good

great, hope your channel grows more and more

son tabağın içine bir miktar sabun veya deterjan koysaydın daha etkileyici olurdu köpükler gazı tutar daha çok patlar başarılı bir deneme olmuş elinize ve emeğinize sağlık teşekkürler abone oldum takip edeceğim abartma ve yanıltma olmadan güzel bir deneme olmuş

Can i use potasium hydroxide flakes??

Can you run a little RC car nitro gas piston engine with the hydrogen that is generated? Instead of just burning it?

@lancemenke2728

Жыл бұрын

don't please don't why would you do that to a tiny little engine the O2 would consume the piston very quickly

@denzzlinga

Жыл бұрын

@@lancemenke2728 hm i don´t know, big diesel engines can run with hydrogen. Maybe you would need to customize it, mill a new piston and cylinder out of tough steel?

@hrafnkell6132

Жыл бұрын

Yes it's possible as long as the engine is equipped with spark plugs and is 4 stroke,

هذا المسار ليس ب الواح سلستين هل يعمل الحديد فى الخليه دون السحونه

3:41 ❤❤❤❤❤❤

Make a hydrogen boom 😄 with this

Its all fun and cool until the glass jars explode like frag grenedes

If it work i want to change the world to help people's

These gases are a mixture of hydrogen and oxygen, resulting from the electrolytic decomposition of water.They are in the correct proportion to produce the strongest explosion.

Hungária magyar nyelvű forditásra❗ NÓ ↪️angolul ❗

¿Clavos de aluminio/galio?

@TheVADERfunk

Жыл бұрын

Stainless steel

Nice video, thanks for sharing it with us :)

I already did this but it didn't boiled in the 4th bottle. Can someone explain to me why? 🥺🤧

@gowtham777

9 ай бұрын

Insufficient power supply!

Can I use sodium hydroxide?

@billlanphar4629

Жыл бұрын

yes

What are the screws made of? They are black? And can you use plastic bottles? Great video thanks

@TheVADERfunk

Жыл бұрын

Stainless steel

What is the spacing between the conductors(screws)?

@Ethan-dx1bg

6 ай бұрын

as long as they don't make contact with each other, it should be fine. The more screws you have the better it would be

podrias usarlo para cocinar ???

Awesome video!

Great application !

imagine blowing the torch below the bowl

how much liter per hour it can produce?

and thats why i would make it with a plastic bottle

1:55.... Please No!! You learn the bad way to drill a hole! Why?!

Nice video. Had me snapping my fingers too.

Amazing!!!

If you use graphite electrodes, do you still need the potassium hydroxide?

Pytanie tylko ile takie wkręty Wytrzymają Myślę że bardzo krótko

@barblitt4222

Жыл бұрын

I was thinking the same thing. And every other video I've seen shows a stainless steel plate and a copper plate. Wonder how he gets the reaction from a single metal.

Good work and nice video

Very professional work, Thanks my friend, Big liked+♥️

how do you make the hydrogen torch like the initial picture of this video implies you will learn to make?

What type of wires did you use, I used yellow copper wires and it did not run on the screws, is there another type that I can use?

Bravissimo

I'm going to do this for a school project, do you think it's very dangerous to make flames with this? besides how many times can I connect them to the battery until they "stop" working

This guy doesn't like his life. SAFETY 1st always!!

Que se llaman los tornillos???

@Hellbent7069

Жыл бұрын

Those are just drywall screws

Bro answer this how long will it work for?!?!!!! I think the screw will get melted

Graphite or stainless steel will last longer, other basic metals will be dissolved as the anode

@vegancactusleather531

7 ай бұрын

Pencil Graphite is fun. - Use the power of the Terracota, Alumnium heatsink 5v Fan, to heat house?.

Wow 👍

upgrade this to a Langmuir Torch!!!!!

Please consider "VIBRATING the fluid at about 111vibrations per second to knock loose the hydrogen molecules at a much higher rate!!!..

@barblitt4222

Жыл бұрын

Very good idea. But why 111 Hz?

@vincecox8376

Жыл бұрын

@@barblitt4222 That appears to be a frequency that granite rock having quarts and felspar material will start to disassemble them self's if vibrated. Once you remove the vibration the rock will comeback twice as hard give a more perfected molecular consistency.

@vincecox8376

Жыл бұрын

@@barblitt4222 REmember to vibrate not oscillate, the "B" field

Hello @skillmake can I ask sir/ma'am if what is the size of the bottles you used. Please tell it to me in L, W, and H thanks just need it for my experimental research of that idea of you sir/ma'am 😊.Hope that's really working 🥰. Please answer asap sir/ma'am 🤧

Make a steam engine. Solar panel battery and torch in boiler burner. Then make a train.

As an electrics tech for 20 years, the soldering is laughable.

Wow nice idea... connected with you. Thanks for sharing.

@skillmake

Жыл бұрын

thanks for watching.

@red1electronics353

Жыл бұрын

Help me...

My question now after having done this for some time is.... Why now don't we make a divided dry cell so that we feed the consumption of the gas with only the hydrogen feed?

@Bigbfromcle

Жыл бұрын

thats what i was thinking, but it would be more efficient to have them mixed together in this scenario since it uses oxygen anyways, but for transportation and other things it shohld probably just he stored as hydrogen then pull in air from thr atmosphere

Hahahahahah! The rocket show was amazing end of the video dude!

Super!

@skillmake

Жыл бұрын

Thank you very much!

Hi there what current can we expect from battery?

@totodot8834

9 ай бұрын

im pretty sure any battery works it just works slower with smaller ones

05.02🤣🤣🤣🤣🤣

How to make pure hydrogen and oxygen saparetor kit??😊

instead of using salt water use drain cleaner it does not make the water dark green when the electrodes are active

ha ha !!! made in iran . the text on bottle cap is a iran food brand

@skillmake

Жыл бұрын

yes im from iran

The thumbnail for this video is dangerously misleading, you can't see hydrogen burning.

Bro can we use any other bottles for doing this? And Which type of stainless steel screw is used ? Can we produce hyderogen from single bottle also?? Please reply soom

@billybobjankens12

5 ай бұрын

You can use any other bottle with salty water, and you can also use any screw. You can generate hydrogen from 1 bottle too, and you can also use sodium hydroxide, potassium hydroxide, baking soda, or calcium carbonate instead of salty water.

what if you directly put the flame to the exit tube?

@alx_8563

7 ай бұрын

It will explode.

@Mysticals897

7 ай бұрын

Thanks , I supposed that would happen due to the pressure as well@@alx_8563

good idea 👍👍👍

@skillmake

Жыл бұрын

Many many thanks

Всё из стекла сделал специально, чтобы если "бабах", - то уж 200-ый наверняка!!!

👍✌

U are teaching the whole you should indicate each materials the by English thanks appreciate more wisdom

@skillmake

Жыл бұрын

I try

Scusa cosa hai aggiunto all acqua?sale?

I have a question, does this generator generate the healthy hydrogen water we want to drink to heal our bodies? I’m in need of healing, been on the journey for 13 yrs now. Thanks you.

@totodot8834

9 ай бұрын

it generates hydrogen and oxygen gas

u could use salt aswell could u?

Can you also make storage for that gas and how we can use it generate flames

@totodot8834

9 ай бұрын

you can but you will need to separate the oxygen from the hydrogen or you will blow yourself up

Revolutions on you drill are slightly too high 😂

Hmmmmm... Was hoping you put the end at a cooking stove, but it seems way too explosive to be usefull for cooking. Cant it be made to just burn nicely like propane?

@skillmake

Жыл бұрын

Hydrogen is very reactive and I hope a way will be found to control it. Technology is working on this issue and I think it will reach somewhere.

@MegaCyrik

Жыл бұрын

@@skillmake maybe a small gasoline generator can use it, then it can run an electrical stove :) *Edit* Btw thx for video. Think i saw some using steel wool for even more surface in a video. i got to try it some day :)

@treeweel

Жыл бұрын

Ничего сложного, огнепреградительный клапан поставить только. И надо таких баночек по больше. Плюс накопитель, и редуктор. Вот и всё.

❤

the picture on intro page shows holding a glass bottle and an hho flame coming from a nozzle. HHO gas is a perfect mix and has an extreme burn speed holding a bottle and flame coming from it garanties glass potentially jnbeaded into hand or eyes. The only way to keep the flame from feeding back and causing injury is to have nozzle gas speed faster than a 9000 fps burn speed. omg

@aurasensor

Жыл бұрын

You should use plastic bottles anyway. Most people use 2 security devices: Bottle 4 (the bubbler) and a device in the final output tube, the arrestor. It can be simplest a cigarette filter. Or: a metal pipe filled with steel wool.

@jazzdein1

Жыл бұрын

Please elaborate, I want to do this, but I need someone that can teach me. It would be much appreciated 🙏. Will a 12 volt car battery work for this experience? I want melt soft metals, is that possible. And what things I shout look out for. I have two sheets of non-magnetic stainless steel, im thinking that would be a better option then screws. It would be a pain it the but, but ill do it if it performs for my needs thank you and I do hope you comment back PLEASE!! Sincerely Deegan 777

Can this be powered by a simple corona motor?

Broo what is that increadient salt or drain cleaner😊😊

I'm down voting bc he dosnet list materials used or explain the process

I hope you installed a check valve