Your level of craftsmanship is incredible

@chrisseger6870

Жыл бұрын

Truth.

@mikehughhawk

Жыл бұрын

Especially if you take into account everything is 1/5 scale meaning all his measurement are millions of an inch

@mikehughhawk

Жыл бұрын

@@greatestevar well I have to disagree as someone who works in tool and dye we do everything in thousands of a inch as mm are to big

@HitLuca94

Жыл бұрын

@@mikehughhawk wait until you hear about microns

@mikehughhawk

Жыл бұрын

@@HitLuca94 we were taught in micron but in Canada all the old school millwrights and tool and dye guys use thousands of an inch. But yes tell these kids about microns as that type of tolerances have even less room for error.

This is what I used to dream of when I was messing around with single cylinder, centrifugal clutch nitro's back in my teens. It's insane that this is now a reality - Every time Jonny makes something and it slots perfectly into place is like ASMR for me 😅

@jbirdmax

Жыл бұрын

There is absolutely something mesmerizing about watching a master at their craft.

@Trendyrapslut

Жыл бұрын

those are still around.

Finally someone installed this thing on a chassis, getting kind of old watching people run them on a stand, this guy is an amazing machinist, thumbs up! 5 stars over and over, thanks for the video.

I agree with everyone else’s remarks. Very cool and interesting/ entertaining to watch. I know there were many hard thinking hours put into it that us viewers got the luxury of not having, we just got to relax and view the coolness of it. Thank you for sharing with us.

Your builds are the absolute best when it comes to these nitro rc's, always next level, incredible!

Every time I think this guy couldn't impress me more with his machining and engineering skills he does it again.

@droneman8998

Жыл бұрын

He stole tamiya transmission. He didn't invent anything here just stole the stuff from other makers.

@benjaminkriebel3569

Жыл бұрын

@@droneman8998 wow. you seem upset.

@droneman8998

Жыл бұрын

@benjaminkriebel3569 not upset, just don't like when people say they invented something that they ordered online. It's actually pretty hilarious.Good day!

@ZJMK605

Жыл бұрын

@@droneman8998 lol, nobody said anything about inventing anything.

@benjaminkriebel3569

Жыл бұрын

@@ZJMK605 that’s what i’m saying lol

This is more than just a build. This is an artpiece. Brillant work Johnny, Bravo!

@Stallnig

Жыл бұрын

I'd call it jewlery

@joshuachudley1270

Жыл бұрын

If you want art piece, look up Real Scale size ferrari... the guy went so far as to make a scale Ferrari down to even valves and valve springs, running gages and everything

@GAMES.770

5 ай бұрын

😊😊😊😊

@suetaylor1127

Ай бұрын

Someone needs to build a multi engine full size mini car. 2 v8s for each tire

I’m amazed at the quality of your work. I am into racing RC boats and some of our guys put thousands of dollars into them in their works of art. This compares with them. It is beautiful. Can’t wait to see it run.

Never built one of these but have built plenty of off-road vehicles but I can totally respect the amount of time and craftsmanship that is involved to build these little guys. Really not any different than the full size version other than bigger. You have my respect there sir.

Beautiful work, Johnny! This thing looks like it'll be a blast once finished. Can't get over how good the engine sounds too.

@yogi2083

7 ай бұрын

😊😊

@yogi2083

7 ай бұрын

😊

@yogi2083

7 ай бұрын

😊

@yogi2083

7 ай бұрын

😊

@yogi2083

7 ай бұрын

😊

So excited to see one of these motors actually put to use instead of sitting on a stand. Craftsmanship is incredible, watching the gearbox in action is mesmerizing!! :)

Brilliant editting. Easy to follow without a word needing to be said. And without taking 48hours to get through. Elegant excecution.

Glad you chose the RC car to put that in. You do amazing work, and I like watching your stuff. Can't wait to see the first run with that thing. Keep up the great work. Thanks

I didn't know there were legitimate scale engines in the RC world like this. This immediately has me imagining a true scale Corolla Trueno with a DOHC 4 cyl if one exists, rwd, a true scale represented drift car. I've seen the RC drift cars for years but electric doesn't excite me and nitro always sounded to annoying and loud. This actually sounded like a real engine but smaller. Wasn't annoying at all. I'm subbing!

@MiGujack3

Жыл бұрын

Not sure about DOHC but there are small 4 cylinders out there for a while now.

@yuryv.2188

Жыл бұрын

@@MiGujack3 this v8 is already dohc

@AaroKo

Жыл бұрын

@@yuryv.2188 no it isn't. the other cam pulley is just idler wheel on these toyan engines and there's 1 camshaft under the valvecover :)

@AaroKo

Жыл бұрын

I know this feeling so well, I have the same feeling for motorcycles too that all 2strokes make the same annoying sound and 4stroke 2cylinders sound like worlds longest wet farts but 4cyl+ 4stroke bikes sound like heaven :)

This was already a Roy Hobbs "The Natural" home run of a build. However, when you showed the inner workings of the gear box I was smitten. Fabulous work and keep em coming.

As always - top notch engineering, well filmed and nicely presented. Cheers! :)

The RC industry is making massive leaps and bounds. In the last 5-8 years alone the new products are amazing. And those Toyan engines are getting better by the day. I remember being pressed by their early one and two cylinder engines. Now they have a V8. The industry has really given the advanced RC DIY guys a lot of cool options.

@user-vs5kn6wv1z

Жыл бұрын

There was a model v8 20 years ago not sure what happened to it.

I really enjoy your videos and even more the passion involved in every single project. No words nor invasive music in the background... Just you and your magnificent piece of art. Just an awesome channel, keep it UP!

Awesome engineering and fabrication. Job well done. Can't wait to see it run on a track.

Hi from jim in Australia. You're a mad man and a genius and I absolutely love it. The fact that you made your own 3-speed gearbox with reverse is mind-blowing and I cannot wait to see more of this project. Not to mention I can see that you're building this with off-the-shelf parts/slightly modified parts, you could make this something that followers could build at home. ❤

6:36, you need to secure the pneumatic fitting holding the bowden tube better. It can help with stringing and less retraction.

Wow Johnny! You have some amazing projects! Can’t wait to see the end results!

All you guys that make these are artists. I am amazed at your ingenuity and dedication to perfection in your work. Well done!

Years ago I graduated from watchmaking school, and worked for sometime in that industry. I am really impressed by your attention to detail and skill.

On of the best fabricators, designers, and builder’s on here. You do incredible work! Always excited to see what you do next.

@Aderin.

Жыл бұрын

@Jason that man literally made a custom v10 engine, what a legend

@benjaminkriebel3569

Жыл бұрын

@Jason to be fair he did say "one of the best"

I occasionally build stuff myself but your level is just incredible

The Sound and Working of the Machine just gives thrills. Awesome Work!!

I love how a v8, no matter the size, just sounds like a v8. Even this small... it still sounds amazing

this is another amazing creation & build. I look forward to seeing its use in the future.

The stuff that u do is incredible I wish I had the tools that u have u do really great work

Talent, ability, vision, experience. All are obviously amazing and the sound of that V-8!!! Man-o-man!!

The videography, amazing parts fabrication, and creativity is astounding to me! 👀💛

Love your builds. Can’t wait to see this monster rip down the road.

Masterpiece of engineering! Best example of full functional RC I've ever seen.

Please do keep us posted that's an absolutely fantastic build you did

That looks and more over sounds incredible the amount of engineering skill put into this beast is mind blowing can't wait to see and hear it running! 🙂👌

This is amazing. I've been waiting for this and can't wait to see it on the road. I wonder what the gear box will do when you have pressure on the tires. Freakin awesome

For someone who just got into the rc car hobby a year ago to a real miniature nitro engine that an authentic original handmade looking functioning like a freakin v8, transmission with gears,radiator, coolant reservoirs ... my mind is blown sir this is like art your craftsmanship is 🔥🔥🔥 this is my first time seeing this I have to go watch the other videos leading up to this and diff waiting to see the end of project.... wow

I think you rock Johnny. I Learn something new every video it would be nice to see some of the things that didn't go as planned. As Im sure we would learn even more. Thank you !

I love to see the craftsmanship. Awesome. And the model even works! 🙂

This is so awesome! The only thing it's missing is a tiny turbo with a tiny super high pitch blow off valve haha! Great build, very impressive! 👏

I'm speechless ! Extraordinary job, can't wait to see the finished car...

Personally I woulda use a bearing for the driveshaft support! But all in all your level of detail and dedication is fantastic!

Great project! That radiator shroud though!incredible flow!I am not sure about the dog engagment rings health after a few runs.they used to fail on race car even when they are hard steel-chrom.i believe they will need to be adressed as a steel parts soon.specially when the throttle-torque reductiom religns on manual controll(hand) Cheers! Keep the great projects coming!

@tanyav7888

Жыл бұрын

Titanium

@josephcitizen4195

Жыл бұрын

@@tanyav7888 This titanium revision is officially approved by me. Shit, let's get this out of the way now. All proposed revisions to replace any existing part material to titanium is hereby approved.

Couldn't get my eyes off the video even for a second. If I ever built this on my own I would go crazy with happiness

Such an amazing and beautiful build. True skill, talent and engineering. That is in my opinion a work of art. Thank you for sharing. Would love to see the finished product and run. 👍

FINALLY!!! What your doing is art!! Please turbo or supercharge it next PLEASEEE

@dd100k4

Жыл бұрын

Twin turbo

These videos are so satisfying

We’ve been waiting for this can’t wait for the final results it looks like it will run great with that transmission 👌

Man I absolutely loved watching you build this rig. That is awesome!

I dreamed of building this kind of stuff as a kid I just never knew how, wish I'd figured it out after watching your videos 🤣

I'm extremely impressed with how well the transmission works I'm really curious how you designed and built it

Amazing machine mate. I'd be super keen to see the finished running project!

This is just friggin AWESOME!! Dude you have gotta be super proud of all that time and effort that's gone into this build! Knowing you though this is just the start! To come is still.... brakes, suspension, hubs, just anything really that you can make stronger and better! 😁👍👍👍

I would love this to be evolving into a multilink rearend, macpherson strut frontend, with ur own designed knuckles, suspension arms, and steering linkage. Also, making it an RWD with a gyro would be damn cool to see.

Awesome work!

Amazing man! Truly inspiring to see the level you are working at! Definitely a beautiful car

I dig it dude. My boy loves watching your videos. Downright gets upset if I watch em without him.

To me this is just an amazing piece. I just stumbled across this and said "Interesting how did he do that?" Would love to see this finished piece. May I ask what kind of CNC machine are you using?

looks so cool, cant wait to see when it works what body are you going to put on it?

@boss_niko

Жыл бұрын

muscle car would be nice

All it takes is know how and the right machines and you have that going for you. Bad ass, great job Johnny!

I wish i had all the tools to do what you have done, this is truly amazing , cant wait to see you complete the build and make the test drive video

Great work! It's amazing to see your work. I'm exited waiting to view the first run on the street. Go on man!!

Should make a different intake system for it, seems like just like the other engines the stock intake is more about looking the part then flowing much air

It's really beautiful to see! BUT, it's WAY too complicated to squeeze everything together on that small frame. which can work very nicely Serpent Viper 989 Nitro 1/8 RC car or 1/8 Serpent Viper 988 BUT that is no longer a sport you would say. regards Rob

Finally someone did it! I’ve been thinking this sense day one when I saw those engines. Nice work.

AWSUM Dude! had no idea that this tech was even out there, with the small V-8 engines that is. A real master piece with the transfer case and all, a true work of art.

For braking, why not installing a brake disc on the transmission after ther gearbox ? It will allow you to have a single brake for the four wheels easier to install

what if you make a small ctv transmission for an rc car

@johnnyq90

Жыл бұрын

I'd love to, but I need to figure out how to make some parts what belt should I use, etc.

@riverpirate1022

Жыл бұрын

It will just explode. Tiny parts, way high rotational speeds and pressure. There is a reason all successful RC cars have simple designs. This thing is already way to complex and engineered wrong and will never work, or work well, or handle well, or be reliable.

Wow... what a build !! Cant wait to see the specs when complete. Torque, rpm etc... wow. Sublime craftsmanship....

From your first to this video I can tell you've learned all kinds of new techniques you've really gotten great keep it up

Noice

Amazing it sounds so real. Will love to hear it with pips. I have to follow this build.

Cant wait for the finished product, keep up the good work

Dude, that manual trans is amazing. Work of art

That is so awesome, and a lot of thought and knowledge of the mechanics to execute it! Love it 😄

I enjoy your videos so much and I don't even own any RC cars.. Maybe it's about time I get one 😄 The manufacture and assembly of the parts is just amazing! You rock dude! Keep up the good work, can't wait for the next video of this awesome car.. the engine sounds so good! I'd love to see you make a proper exhaust system for it also!

I love these videos the craftsmanship is unbelievable very well put together keep it up!!

Your a genious! im almost done with my cnc machining school, i hope to learn a lot more in the Air Force and will hope to be able to build engines!

@DastardlySnake

Жыл бұрын

You’re* Genius* couldn’t help it, that is to ironic to make those mistakes with the context of the sentence

This is masterpice, good work Johnny!

You are very lucky to have such a workplace where you can work with such machines!

Excellent video!! I already want to see it running on the track 🔥🔥

No words to express this marvelous amazing piece of art creation you are definitely one of a kind !!! Fantastic perfection the best of all !

Amazing man!! Really fantastic

Your quality of workmanship is outstanding. Nice result👏

The sound of that motor is SICK!!!!

That's awesome bro, love the build well done mate.

Absolutely mind blowing. Definitely going to be following this build👌🏽😎👊🏽

Fantastic amazing precision engineering wonderful subscribed love the build really nicely done 👍

unlike anything I've ever seen before!! Great work of engineering at its best.

I like rc cars. I'd love to get a gas powered one. But you make what I wanna do seem so elementary. Seriously man such attention to detail and commitment to design. I love to see it.

Well done sir, can't wait to see the next installment.

you sir got me addicted and you deserve a sub for QUALITY content

This is amazing man. I am subscribed. Love it!!!!!

A thing of beauty!!!! Craftmanship is top notch.....

EXCELLENT work! Beautiful creation! As much as I admire 3D printing, in most cases machining is far quicker. Especially for one-off projects that won't be repeated much. Yes, I know there are things that can be 3D printed that can't be machined!

Some bit of kit that is you’ve produced, fair play, wicked 👌😉

Rc cars have come so Far! Great video mate!

Broooo this is amazing man congratulations on the build bro amazing work keep it ho

That´s one of the coolest builds i have ever seen in rc