the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzread.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

I just want to clarify... I was replaced by TWO blocks of wood and a clamp. Don’t short change me.

@Bourbonmoth

3 жыл бұрын

Touché

@rickytickytarvy1980

3 жыл бұрын

Wow wow wow don't forget the clamp

@furniturebum9673

3 жыл бұрын

Social distancing is showing its effects 😂

@slightlycrookedworkshop

3 жыл бұрын

Let's not forget that it was his idea to make a hand crank and then he made you turn it. Kind of like how my wife has all these grand plans for things, which involve me doing all the work.

@dmack1827

3 жыл бұрын

@@slightlycrookedworkshop That is right out of the "How to Be a Wife" handbook.

That was an awesome project Jason, treasure the friendship you and Erik have, it isn't every day you can find a great pal and it becomes harder as you get a bit older for some reason. Most of my closest friends have either passed on or live across the country from me!

This may just be the greatest story ever told.

@JustinLynch80

3 жыл бұрын

Agreed! Loved it! 🤣

@Harinair72

3 жыл бұрын

... And filmed too!

@Madspusher

3 жыл бұрын

It wasn't the greatest story ever told, this is just a tribute.

@trooperjoe73

3 жыл бұрын

Actually, the honor goes to Patrice O'Neal. 😆 Look that story up.

@hasserecht3678

3 жыл бұрын

Two boys, one big dream. Really made my day. Thank you. One serious question: didn't the stock sag slightly in the middle?

Best wood working video ever. I love watching 2 men handling their wood right and raw.

You are absolutely the comedy genius of wood working! This is brilliant and the video is hilarious. I've recommended your videos to so many people online, including that you're not only good, but will keep them laughing! Thank you.

Hands down best buddy comedy woodworking video I've ever seen, full marks for excellence gentlemen!!!

You guys are genius!!! I love the narration and the adlibs. Great work and hope to see more

Replacing Eric with a clamp was the funniest thing I've seen in awhile. Thanks!

You crack me up 😂🤣🤣😂 , I was feeling like crap before watching you, god love ya, thank you 🙏. Cheers Wiz from Tasmania, down under..

Lol you guys bromance double hand feeding some wood stock together is the best love story I've seen this year.

First video I watched on this channel I remember thinking “this guy is out there”. I ended up watching more and more and more. Love the channel, love the energy. Keep on keepin on. You have a gift.

Thats actually awesome. This video has shown me that I do not have to spend money on a pricey lathe that I cannot afford right now. I will be saving this video for future reference. Thank you very much.

Love it! Just so you know, you could eliminate having to manually slide the router (and having Erik help at all) with a couple round gears and a worm gear, and then you can even make some pretty fancy spiral columns and posts. But then that would require a really long threaded rod.

OMG, this has to be the best video I've watched in a LONG time!

Necessity is the mother of invention. Against all odds....it worked! Great job.

This is great! Loved the humor and the idea for the lathe!

It's not about the victory, it's all about the journey.

Much love man. Most entertaining wood worker to watch by far. Always funny. Still always on point.

DUDE(s) You crack me UP! Not only did you educate, but with comedy to boot! Keep up the fun

So cool! I love the story telling aspect of it as well.

This... this is quite possibly the most bromance story ever told. I’m a fan for life. BMW4L!

Its really a very good stortelling and screenplay.

You know, most woodworking videos I see, just plan suck, this is the 2nd one I’ve seen of yours, and dig your humor, and vids, keep it up

I subscribed to your channel for two reasons. 1. I love your work. 2. Your intro had me in pieces. 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

I was loving the bromance as you were both feeding the timber through the planer together.

@therubbermeep7456

3 жыл бұрын

Isnt standing behind the piece a bad idea though kick back could happen right ?

@mattmorrisson9607

3 жыл бұрын

I was loving the jailhouse shower vibe that shot was giving off, for sure

@renem8130

3 жыл бұрын

Oh I was thinking of that scene from "ghost"

I like the background music in this video. Its fun.

I needed this info. Will be making a rowboat and I'll be needing a means to make some oars. Much appreciated. 👍🏽

Necessity is the mother of invention. You did bloody good.

Gunna have to add this to my kids bedtime story lineup

Necessity is the mother of invention.

Sears used to make this or something like it but theirs worked. I had one and regret selling it. I like the length of you lathe. I think it's time to make one for myself. Great video thanks for sharing and inspiring us.

Just found your channel, watched a few videos and this is most definitely my type of channel, good humour, good music, and great project! 💪🤘

Two of my favourite wood guys having fun . . . great vid, cheers guys!

DUDE!! THAT'S THE BEST HOMEMADE LATHE ON THE PLANET!! I THINK IM GONNA MAKE ONE!! HELL YEA!!

Love the idea. I will be making one. I will be adding to the top a way to lower the router as the material may be different thickness. Great idea.

This video deserves more recognition

two boys had a dream. !!!

Dudes, you made the best video ever. Love the humor.

First time viewer and subscriber too. Just found your channel and man i think i laughed almost as much as i was wowed. The detail y'all put into something you may never need again, but you never know. I can't wait to see more of your videos, especial if they are all as funny ! Thank You for sharing & making me lol for real lol.

lol i love this guys are funny. and im just a girlie girl sitting here watching all your videos cause i shouldve had a career in woodwork..lol

Love the humor , without make fool of your self. Subscribed.

Pretty ingenious idea guys. great job.

Excellent video dude!! Great story!

I can’t think of a better way to get this job done!

OK, I'm to the box store for some more Erics tonight.

AWESOME :D We recently cleaned out my great grandfather's workshop and I snagged a couple routers, unfortunately we weren't able to get the lathe he had but I think I can do this small scale as a good substitute until I can just buy one :D

Epic soundtrack on this one.

What a good friend Erik is 😂

This and the boat videos made me subscribe.

Subscribed purely on this video. Loved it.

You guys are so stupid funny, that I watched this video like four times in one sitting laughing my ass off. Loved every minute of it. Thank you for your great videos always.

Brilliant idea loved the narration 👍✌

this is a very brilliant idea i love it, i see much potential for its upgrades in the future, thank you for sharing this, would love to see the specs for the design if possible cause i would love to make this myself

Beautifully narrated.

Chuckled a lot during this video. Thanks!

The journey was appreciated.

I've been trying to figure out how to lathe up some handles... now I have a plan!

The awkward laugh at 1:22 just earned you a subscriber. 👍

@808artemis

3 жыл бұрын

Ditto

Only if we could replace most people with a clamp and a block of wood. . you guys are funny. New sub!

Also the router was mounted on a hinged system that you could just lift the router up and out of the work piece and adjust the depth if you so wished and dropped it back down. With that locked in place you could cut grooves and other things in the wood much like a lathe. It had a micro adjust on that flip plate that you attach the router to to drop the router in as lightly as you wanted to. Pretty ingenious and now this video has inspired me to get it out and use it

By far the funniest wood channel 😉

It might be the bottle of wine I’ve had…I don’t drink and work in my shop, for I for damn sure drink and watch your channel. But this video. I have tears from laughing.

Hey mate, have only just discovered you and have learnt more than a couple of your videos than all the other together, Mark From Australia, just love ya work and humour, you should have been an Aussie dude

I’m literally crying by the end. “I replaced him with a clamp and a block of wood.” 😂

Awesome video!! You guys are good together!!

This is one of the best things I have seen on youtube.

I made something very similar based on something in Shop Notes. I ended up making the router move along with a threaded rod and a coupler nut mounted to the router base and wooden gears at the far end to make transfer the motion from lathe to router. The reason I did this, I needed a Cable Drum, so after smoothing out the drum, I switched the bit to a round nose bit, actually I used av-groove first but that didn't work too well. when I ran the contraption this time I created a spiral grove down the drum.

so much fun to watch and really cool idea

Amazing idea!!! Thank you

I have to make some hand rails and you guys just gave me a great idea.

Love these videos!!!! Entertaining and informative 🙏

Oh good lord!!! I have laughed a lot!!!!! How funny!!! Thank you both. You made my week!!!🤣🤣🤣🤣🤣🤣

The ending is the best🤩

Very cool concept, great story telling and hilarious video

Awesome. Watched a bunch of drunk history and recreated it. Also love that you use mostly festool tools but use a Walmart drill.

Stumbled across this by randomness and fell in love with the... well just the whole thing. ^-^ Looking forward to more

Thanks for a very good idea!!!

Brilliant, absolutely brilliant 🌞

I don't know who the he!! you guys are, but you crack me up. And you're talented. Well done.

That’s one bad ass cross cut sled!!!!

you are too fun! love this so much. huge smile the entire time and much laughter emitted.

Learning should always be fun

Your videos are always fun, educational and entertaining.....but this one made me laugh quite a bit. Thanks.

Man I love your style of video’s, hilarious!!!! And your work ofcourse!!!!

going to buy this plan. good idea

Very cool shop and thanks for sharing

Loving the content!

It got the job done and noone was hurt in the process (that we were told about anyway), so I would call it mission accomplished. :)

This is awesome. You so deserve a cable show!

Such a great video. So entertaining. That contraption would make Izzy proud...maybe. : ) Mahalo for sharing!

Cool bro! Funny, fun, and creative project and video. Strong work

Fun to see the engineer in you. Sometimes you just got to do things the fun way.

Was it the best way?... It definitely was... The last 5 secs was pure classic.. Genius, hilarious, joyous! Loved and laughed the whole length! You two should really think of doing a movie...wild-west bromance type!!

Great vid guys! Love it. You’ve got a new sub

G’day! Really enjoying your content! Great projects and you crack me up! 😆👍

I think that was totally rad, Genius like ❤️ it!

Thanks for the Great video. Informative, ingenious and my type of humour.

Awesome lathe! I’ll be making one.👍🏽😎

This was the best dream ever and it was made a reality in less then 9 min that is simply awesome