Win This Actual car raffall.com/350694/enter-raffle-to-win-m2c-full-modded-6s-big-rock-hosted-by-kevin-talbot

@Varacer

4 ай бұрын

Kev what’s the link to the dewalt impact you use in most your builds? Thanks.

@xerravon

2 ай бұрын

One question I will ask if I ever catch a livestream ill ask but for now. what are, In Your Opinion (IYO) are the best hex or as old timers or USA people call(Ed) Allen head or Allen keys, what are the best that dont round out/off? I just got an induction coil hearer im going to use to try and temper after cutting off the rounded bit.

@haydzbiggs27

2 ай бұрын

Hey kev, could I please have upgrades for the Arrma Granite Voltage 2wd please and thank you

WOW! What an awesome build video! What an awesome resource for the novice builder as well! To have an experienced RC guy go through an entire build with them! Thanks for all you do for the community!

The armma big rock my favorite truck of all r c's I love the looks of this truck❤❤❤

I got myself an XRT and Fiesta ST Rally and a Hobbywing Max10 w/2400kv motor. Love the XRT. Waiting for a couple upgrades to come in for the Fiesta.

You must have one of the biggest collections of rc cars and trucks in the world.

I absolutely love this truck I remember when the first 3s version a requested you to do a video on it.

@Varacer

4 ай бұрын

I still have a br 3s myself. One of my favorite all around bashers for sure.

“Finish off with the rear end”……….thats what she said…….priceless kev!

Also I think a good video idea would be to get a Tekno ET48 2.0 along with the M2C upgrades to see how well it stands up to bashing. Tekno rigs are already by far the most durable “race spec” kits you can buy so adding the M2C stuff would put it n anothe league. Having the ET48.3, ET48 2.0, EB48.4, EB48 2.1, SCT410.3, ET410.2 and EB410.2, and absolutely loving every single one, both because I can rip them competitively at the track plus bash the heck out of them, or when I want to do speed runs I just throw a 26t pinion, 6s battery, foams and a shaved rear wing on the EB48.4, which combined with the Tekin RX8/2650kv motor, it hits 100mph on the GPS. Surprisingly I can go through an entire 5000mah pack going back and forth in a giant parking lot and it never gets close to overheating either. I love the Tekin stuff. Every one of my bigger than 1/10 rigs has them, and the 1/10 stuff has mostly Hobbywing combos.

Futaba is and always has been 25t spline. I think HiTech or Savox or Spectrum, maybe all 3 are 23t spline. JR servos used to be 24t, I used them back in the early 2000’s, they were the first nice servos I ever bought. For just under 100.00 bucks they had the best specs out there.

How do you keep your slipper clutch to stop slipping once tightened ? Once I really give it the beans it starts slipping all over again..

I see you do the same as me using a manget to help hold screws its a great method.

To make the front bumper install easier, I drilled out the 4 locations of the bulkhead screws allowing me to install the 2 rear bumper screws and nuts prior to installing the front bulkhead assembly. For someone who takes my RC’s down 100% after several runs to completely clean and check everything, I’m always looking for ways to make bad engineering designs easier to work with…

The droop screws are important on some vehicles. They limit the down travel and stop it before the shock shaft and piston bottom out and stop all the weight of the arm/wheel/tire etc which is not good. If the arm hit the chassis before the shock gets to its limit then you are correct in saying they don’t really do anything. But if the shock is the limiting factor, by all means use the droop screws and you won’t destroy or have leaky shocks.

What I loved about this video is the dammits and what the hells because that's me wrenching on my RC's. So relatable coming from the king of RC YT

Love the work you do. Sounds like a lot of money to make a durable rc truck though. Happy New year kev

Just built my first buggy last night and wow does it mean so much more to you when you build it step by step

@user-dd5vw3zj5v

4 ай бұрын

Can I get a new ec car please❤

Went to the race track and improved my PB with .5sec just by oil in front shocks. 😮

Manscaped was the worst trimmer I ever bought. Battery was totally dead within a few months of buying. Barely was able to even cut hair even when it was new. Terrible product. But hey great video nonetheless Kev keep up the good work 🤙

From Maine USA. love your channel absloite blast to watch you. And all your info is awesome. Plus a great all around attitude. Keep it up bud. !!!!!!@@@@@@!@

I just ordered a mjx hyper-go. I hope it is a good car.

Long time watching you help people out from I'm Joe from Hutchinson Kansas

I wonder if that front bumper would fit on a Kraton

Arrma fan boy here , love the videos kev , keep up the hard work

Does anyone know how to swap a chassis on a maverick quantum xt flux I’m stuck and very confused as to why I have unscrewd everything and it’s still not coming off

Yes I like the way you put that truck together I would like to do the same I have two trucks of redcat..

Love the truck and billed Christmas was ok went to the salvation for food then me and my son who is 3 went home watched a movie and went to sleep I hope you had a beautiful Christmas god blesse you

Booooom!!!! Only took a split second.

I watch you much as possible this is my favorite show to watch on KZread and I'm hearing you from Merced California

How much additional for all that m2c beefcake stuff? As in total as built cost when you finished would be what??? Thx

skydive instructor 👍👍👊🏻👊🏻 I have 326 jumps

Franklin, Oh. Really enjoy your videos.

Thanks for all the content this year kev

Love you videos man I’m new to the hobby over here in NY made a cool mud rig keep up the good work 🎉

I’ve been here since the tank video with the xmax and big window you jumped the xmax out the second story window that’s when I found Kevin love the channel

Doesn’t matter! It’s what you want to do! They will watch regardless 😉

Whatever you say, I do believe you though cause you do build a lot of RC and you do have a lot Rc so you know what you’re doing so keep it up

my life right now is just W i have kevin talbolt and it is FRIDAY!

I hope one day I can buy one of the RC cars in Kevin's video. For now it doesn't seem possible.😫

If you say, I believe 100% cause you don’t lie you never lied any of your videos and you do launch your RC at the skate park and all that man I know you do it because you got the money to do it and you got the parts to fix them so I don’t have to pop the piss in the window at the window so I’ll take care of my babies like what you’re doing. Now I’m bout to get the big rock 6S and it is small. And I wish I can upgrade it like what you’re doing now make it more thicker and better but I don’t have the extra money to do it so whoever gets this one is a lucky guy and I wish it was me because I am getting one of this month I’m getting the gray one the gun Whatever is called but the gun color whatever is called but they got the red end of the white ones though they all look sharp so it’s hard to choose so I picked the gray one but I used to have the 3S and I sold it and I wish I kept it but the one you’re doing now I wish I could upgrade it the one I’m getting so but that’s why I don’t jump on. I jump on maybe like one or 2 feet in the air but I don’t jump them at the skate park so whatever you’re doing to it it’s making it more stronger. I know that so I wish I had the money to upgrade them. I just two months ago went out and bought Sledge and I love it. It’s a very good vehicle very good vehicle.

Well In the Arrma and Traxxas Debate i say brand don't matter , thay both brake and thay both are a lot of fun bashing lol..

a 4x4 awd little trophy truck that does epic donuts XD

@kevintalbotrc You should take one of your Xmaxx’s or a UDR and do a build with either using all available parts from Vitavon to compare. Now days the Xmaxx can be nearly 100% swapped out to alloy and the UDR is close too now that he released a full 7075 chassis. I know it wouldn’t be best for bashing, but man, they would be sexy!!! Do it Kev!!!

Bro Toyan makes or made a BV8! I makes 4.29hp I seen on RCDriverOnline 💯💯 Would LOVE to see you work with it and do something super cool!😊

I am so happy you said that your viewers meen more to you than anything keep it up 🎉

The es. Problems was the first 6s ones cstching on glames like hell or burning out.

Use some tap magic to help with the drilling

My current favorite is my 8s mokraton i built almost 3 years ago

Great content Kev 👍🏻 learning lots from you… thanks

Merry Christmas

That is Awesome ' Arrma Bigrock is one Crazy & Cooling looking RC Truck - My Kid's Hayden She's -Zac's 8 - Colin's 6 - Landon 4 - My Crew ( The Nutt -Bird's ) Iol ' , We Love watching You Blast !!! We' as a Family are into Having as much Fun as We can So' I bought a Traxxas E-evo 2 Years ago , although We don't get Crazy with it I take them to the park We' take turns an let it Ripp ... They Love it ... Keep Blasting Sig

Barbie Drift Car! Nitro would be even better if it fits

prefer Arrma. don't need any better then my Big Rock 3s , durable, easy and cheap to repair and itscheaper than Traxxas,

Don't forget to update the firmware that they've done for it as there was a problem with the esc

just ordered the new kriton 6s exb can not wait and plan to order the new outcast 8s exb in the new year

Nice truck Kev! Just curious are you going to do a video on the new kraton exb?

Don't mind us, we are average Americans, unfortunately unintentionally we don't understand Anything basically outside of our own state. So yeah, I love these 😊 cheers

Continue like that Kev your videos are insane!

I have a Big Rock 6s , watching from Alabama

How fast will the RC car go?

Du bist gut mann fleißig

My little brother asked me what would be the best rc car as like a first good car for like drifting in our neighborhood and I said the armma felony because I watch your videos and thats like my favorite car I've viewed on your Chanel

@2:31:00 that unmentionable topic. If isle of Mann dont allow them, I wouldn't go. In USA, the areas that have them are very low crime. when law abiding people have them, no problem. plus, the idea of the right here was to protect yourself from the people in charge. oh, targets are fun, a lot more than you may think, very challenging. 1st one I got, it was so hard to hit the mark, I thought I got a defective one. yeah, got a feeling you'd not only excel at it, I think you'd love it.

How do i watch the live shows and get notified when you go live i have notifications on already

Afternoon kev just watched the video you done around 1yr ago called (ToTal Carnage) I had the idea of using 10mm tight coil shocks horizontal both front & Back behind Bar shaped Bumpers so if it lands tail on it’ll bounce rather than crunch also what about using either tungsten carbide or better still chromium for the chassis Base plate 👍🏻

IM UR BIG FAN KEV BRILLIANT CAR I WANNA😢😂

I'm moving to the island of MAN. !!! I've been so awesome. !!!!!!

Large RC M1A1 tank.

San Francisco California William!

Hey there Kevin. Doing a killer job!

All the way from Florida Cocoa Florida Sunshine State

1/16 Erevo

ITZ CHRISTMAS EVERYDAY 🎄 😅

I've been searching around for a 3s battery 6s batteries out here in Merced California and then they're hard to find I have an armor felony and I haven't drove it in the room being that I can't find any batteries around here

What size motor is in the bigrock

I love the rant during the upgrade

i am buying a rc truck the granit full size 1/10 or team 1/10???

i got a hosim super power and can u durability test it so i could go harderon it

I will play some rc car i want kevin rc car. ❤️👌🏻✌🏻👍🏻👍🏻👍🏻😄🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

Got me a Traxxas XO-1 San Francisco

Nice ride

lovely i love your videos iua yoour big fan

We went mudding for christmas

Do you have any red cat 1/5 scales

I love these live streams 👍👍 let's hope we don't end up with..... WHAT HAPPENED??

1/16 Erevo 12:18 12:20

That cheap alloy from M2C's simple garage 3-axis mill is untempered, my DU racing towers which are actually 7075-T6 and anodized required my drill press. Not to mention they are a much better 5-axis CNC fit and finish. Edit-we won't talk about the cost😉...

@Mechabjornis

4 ай бұрын

Sounds nice ! Can you provide some facts showing the material properties of M2C vs DU racing?

@4sunshine801

4 ай бұрын

I doubt it. They can't even spellcheck

@GarcBomber

4 ай бұрын

@@Mechabjornis no but maybe Kimberly can hit them all in a vice with her purse 😝

@JapanRCAdventuresS

4 ай бұрын

agreed- M2C is way overrated.

@Shellzwick

4 ай бұрын

I own a M2C chassis and adu . The adu is fancier and more enforced . I got it for a stretched kraton

Pls do a video on hobbiway typhoon mt660 I’ve been spamming this a billion times in the livestream do a vid on that truck

I want Owen off-road off-road

Kevin llevo tres año de tras por un Carito regálame uno por favor

👍👍

My first RC is a Evo 2.0 and I wish I kept that too because I miss it. I did put least like five or $600 until I put up upgrade upgrade dry I put upgrade on servo and some other things I put into it so I can’t remember but one thing I did take out before I sold it. I did take my servo out. The guy didn’t mind. I told the guy I said one thing I’m taking out is my servo is the traction servo 2255 is that good or bad?

Can you make video of hpi wr8 flux rally car 1/8

Whats the biggest truck you've built. ???.

Should I get a fire team?

Ok that nice

Your shoe's are pure nerd🎉

scottsdale az

Tennessee/georgia

Still waiting on that rc toilet

Kev how’s The Losi Moto doing?